Hello!
I am trying to find out name of the backup file database was restored from (I am restoring from DISK), something similar to physical_device_name in backupmediafamily. restorehistory doesn't have this information.
Any advice is greatly appreciated.
Thanks,
Igor
We replicate a SQL2000 database (DataBaseA) to a SQL2000 database (DataBaseB) by using the Restore function and hasn't change its logical name but only the physical data path and file name. It is running fine for a year. We use the same way to migrate the DataBaseB to a new SQL2005 server with the Restore function and the daily operation is running perfect. However, when we do the Backup of DatabaseB in the SQL2005, it just prompt the error message
System.Data.SqlClient.SqlError: The backup of full-text catalog 'DataBaseA' is not permitted because it is not online. Check errorlog file for the reason that full-text catalog became offline and bring it online. Or BACKUP can be performed by using the FILEGROUP or FILE clauses to restrict the selection to include only online data. (Microsoft.SqlServer.Smo)
Please note we left the DataBaseA in the old SQL2000 server.
Please help on how we can delete the Full-text catalog from DatabaseB so we can do a backup
Many Thanks
Hi All,I have to a few backups restored from a set of backup files. Thebackup files have been removed from the drive because of some storageconstrains...For some data comparison reasons, I need to figure out the actual dateof these backup files that is used to restore these databases. Isthere any system table I can query to figure the actual backup timesof these databases...Any help will be much appreciated.. Thanks in advance.- Aravin
View 1 Replies View RelatedI only have the ldf file and the bak file.
My bak file was current to 3/2/2007
My ldf file was current to 3/25/2007
I do not have the mdf file.
How to I apply the transaction from the ldf file to my resotred database?
I have been experiencing "Specified cast is not valid" error while restoring backup of DB. Version of SQL server management tool from which I am taking the backup is "Microsoft SQL Server 2008 R2 (SP1) - 10.50.2500.0 (Intel X86) Jun 17 2011 00:57:23 Copyright (c) Microsoft Corporation Express Edition with Advanced Services on Windows NT 6.1 (Build 7601: Service Pack 1) (WOW64) (Hypervisor) ". And restoring to the same version tool.
I have tried all the workarounds like TSQL, Upgrade the version of restoring DB to higher version, MDF and LDF files generation. But they are not working.
According to BOL, you can initialize a transactional subscriber by restoring the Publisher's backup to the Subscriber DB. But any timestamp columns must be converted to binary(8) and indexed views must be converted to tables. But are there other things you must do? What about identity columns? Triggers?
Thanks
Hello
I have restored a SQL 2000 backup of my database, ever since my web applications are unable to use any of the stored procedures.
I get the following error:
Could not find stored procedure 'xxx'.
If I use enterprise manager and go to the procedures tab the procedure appears there.
Any ideas what is up?
PS: The username has been changed, before the backup it was "user1" now its something else. For some reason it still shows that the procedure object is owned by "user1". Could this be the problem?
Thanks in advance.
I missed the ability to restore based on a time (10/23 6pm) due to our purge cycle in our production environment, but I was able to obtain the 10/18 full backup, the 10/23 differential backup, and the 4, 10/23 trans. log backups. I moved all the fore mentioned files to a staging environment, and now I am trying to restore all of the files to 10/23 6pm and I get :
"The log or differential backup cannot be restored because no files are ready to rollforward" error.
I should restore a SQL Server 2005 Database from backup. The backup contains three files, named user.bak0, user.bak1 and user.bak2.
How is the syntax of the restore filelistonly and the restore database ... ?
I usualy write
restore filelistonly from disk = 'path and filenam.bak'
restore database. zy
from disk = 'path and filename.bak'
with replace,
move.....
move....
This works but I cannot use it with a splitted backup file. The files are much too big to put together to one file.
Thanks in advance for any help.
Hey Guys,
I have a .dmp backup file from an oracle database. I want to restore it into an sql server database. Can this be done?
I just restored my SQL server 2000 database on the SQL server 2005. after this i ran the Service broker sample ("Hello World") on this database by changing the AdventureWorks name to the new database name. The "setup.sql" runs fine. When i run the "SendMessage.sql" i was not getting any rows in the output (The message was not getting inserted into the queue). I checked the Service broker is enabled on this databased using the query "select is_broker_enabled from sys.databases where name = 'newdbname' " It was 1. I even tried the ALTER DATABASE SET ENABLE_BROKER. but it didnt work.
When i tried the sample on a newly created database it worked fine.
Is there any solution to make the restored database to work for service broker.
Thanks
Prashanth
hi all,
our datbase was restore but the publications were all gone.
however replication monitor shows publication and subscription.
worst. can create the publication with the same name because
it raises an error saying that it can't drop publication becuase
there is a subscription in it.
how can i remove the publication when the are already gone in the publication
folder but exist in the replication monitor
thanks for the help
Is there a way to restore a 2000 database to 2005?
will the restore process convert automatically to 2005?
Hi,
I have recently restored a backup of a SQL Server 2000 Database (from my production server €“ which is a shared hosting service) on my dev machine so I can do some testing. The issue I am having is with the permission of objects. Some of the objects were created with the dbo user and some with another login (myLogin). The ones that were created with dbo work fine on my dev machine. The others do not work unless I prefix them with €œmyLogin€?€¦ I get an €œInvalid object name€? if I don€™t prefix them. This is problematic because there are hundreds of stored procs and tables that I would need to modify in order to use them on my dev machine.
Can anyone tell me how to create a new user with the necessary permissions so I can execute my procs and access tables without having to prefix them?
Hope this makes sense €“ please let me know if it doesn€™t.
Thanks,
Mike
Hi
I have an sql server 2005+sp2 instance and a db on it.
I have create a database master key (specifying a password so it WILL NOT get encrypted by the server master key) on my database and backed it up
CREATE MASTER KEY ENCRYPTION BY PASSWORD = 'test'
go
BACKUP MASTER KEY TO FILE = 'c:Genesis_DBMasterKey.key' ENCRYPTION BY PASSWORD = 'test'
Then I have created a asymmetic key without specifying a password therefore the key will get encrypted bt the database master key.
CREATE ASYMMETRIC KEY card WITH ALGORITHM = RSA_512
And then for test I run
DECLARE @Encryptvalasym varbinary(MAX)
SET @Encryptvalasym = EncryptByAsymKey(AsymKey_ID('card'), 'EncryptedData')
SELECT @Encryptvalasym
SELECT CONVERT(varchar(max),DecryptByAsymKey(AsymKey_ID('card'),@Encryptvalasym) )
And the result is OK.
Problem: as a recovey plan if I restore the database on the same or other instance (althogh the asymmetic key is part of backup) the decrypt doesn€™t work.
I have tried to create a bank database restore tha databse master key and recreate the asymmetric key, but I€™m afraid I€™m still not having any luck with it, as it does not decrypt.
My main issue is that is any case if I have to recover the database , how do I have to make sure that encryption/Dycription will work?
Thanks
Dear All,
I have a user with DBOWNER,DBCREATOR role and access is set to deny on viewing any other databases. Now when I connect using this user and try to restore the database. after restore, I can not open it or access it using the same user.
what is causing this.
Thanks,
Is there any workaround on this? I need to migrate my data in sql server 2005 into sql server 2000. Thanks in advance.
View 2 Replies View RelatedHi I took a Full Backup on Production Server and Restored the Same Database on Testing Server, i am able to see all the Tables Stored Procedure and View except Logins, i am not able to see any logins, there are total 650 Logins under the Database how can i see the logins and how to restore the logins, while i am trying to create any logins it is saying Error Occured login is already existing in the Database..
Bye,
Madhavi
Thanks in advance for help.
Could someone please help me for SWL backup restoration and db by user
I restored SQL 7.0 database to SQL 2000. ( by creating empty db on SQL 2000 and restored from SQL 7 backup) -- restore ok..
I need to use same SQL user which is admin for DB on SQL 7, for SQL 2000 also. ( DB user is sql user not domain user)
I put mixed authentication mode ( windows and SQL) in SQL 2000 enterprises manager security tab setting.
I can see DB user is available in DB user list on restored DB but can not access DB when I try to access from query analyser
I tried to create new login with same name as it was in SQL 7 and tried to give full admin access on SQL 2000 enterprise manager but I get error 21002:[ SQL DMO] User 'user' already exists.
Kind Regards
Sunod
I restored a backup of a replication database named "distribution" to a non-replicated development instance (ss2000). Well, when I try to drop the database I am told I can not because it is used for replication. It isn't. But you now how Microsoft is . . . . So the question is: how do I drop the database without rebuilding the server, or jumping through firery hoops????
Thanks!
Scorched
I have a SQL 2k database backup and I restore it in sql server 2005.
Is this now a SQL Server 2005 database or a 2K database in a 2005 server.
Means do I need to convert databases somehow when I migrated from 2000 to 2005. Is the above mentioned way a way to migrate... or are ther some conversation tools.
Any help / links / ressources would be Great...
Felix
We have a log shipping database running on SQL 2000 ENT SP4, the secondary DB is in standby/read only mode . we have a job that runs every day to take it offline, make a copy of the files and attach them as a new database for reporting purposes.
We're planning to upgrade to SQL 2005 however, when we copy the Standby/read only database files and attach using "CREATE DAABASE FOR ATTACH" we get :
msg 1284
Cannot attach a database that was being restored.
this works in SQL 2000 but not SQL 2005, is there a way to force attach the DB ?
Thanks.
Hello,
View 10 Replies View RelatedI need a SQL query which lists out directory path from which the database has been restored recently ( i.e backup path ).....
View 2 Replies View RelatedHi all,
My question is:
If I need to restore a database when all I have is the backup file, do I need to recreate all the tables, or is it possible to restore into a new database ?
Is it possible to restore a sql server 2000 database into a sql server 2005 database ?
Thanks in advance.
This is a pretty basic question, but I've generated a backup file for one of my SQL 2000 databases, and I need to copy the backup file to another computer so I can burn it on CD. Whenever I try to copy the file, I get an error message saying that the file is in use by another process and can't be copied. I have tried detaching the database, shutting down Enterprise Manager, stopping the MSSQL service, but all to no avail. There must be a way to do this, but I can't get it to work. Does anyone have any ideas?
View 3 Replies View Relatedhello All !!
i have taken my backup(back file ) of database and i stored in folder , now i want to know
1)if i format my Hard Disk . and reinstall Sql server 2000 ?
2) if i delete that Database ?
how can i REGENERATE my database ?? again
thnk u all
How does backup database command works? I don't see size of database backup file increasing while backup is in progress OR is it locked till the backup is finished.
Thanks.
Hi all,
I have a ploblem...
i have ful backup file, diffrential backup file, transaction log backup file.
i want to create a new database form backup file.
i do it follow :
Using Enterprise manager
1. Rrestore database from full backup file. it is ok.
2. affter that i restore different database differential backup file. it does not work, the error is :' Theproceding operationdid not specify WITH NORECOVERY or WITH STANDBY. Resatr the restore sequence, specifying WITH NORECOVERY or WITH STANDBY for all but the final step. RESTORE DATABASE is terminating abnormally'
please show me,
nest regard.
Hi
I have copied a sql server backup file. I would like to make it a live database. How would I do this??
Now i must restore a database from a backup file of MS SQL Sever 6.5,but this file is bad. When i restore database from this file, SQL Server tell me that the format of this file is not file format of SQL Server 6.5.So that I must repair this backup file firstly. I don't know database file format of SQL Server 6.5.
View 2 Replies View Related
hi
is it possible to create a database using backup in sql server DE??????????
like we can do in full edition using restore option........
I don't know where to post this kind of stuff so here goes...
I have maintenance plans which sometimes fail because the delete step reports that the old backup file is "in use." I have no idea how to determine what Windows thinks is holding the file. HOw do you determine who is holding a file hostage??
Thanks.