My database's log file is full. i want to backup it .
First i create a backup device named aa.
Than i use Enterprise to backup trasaction log.
But it popup an error messagebox.
The title is "Microsoft SQL-DMO(ODBC SQL state:42000)
The content is "write on 'aa' failed,status=112. See the SQL error log for more details.Backup or Restore operation terminating abnormally.
What's the matter ?
Environment: Win Server 2003 Standard Version, SQL Server 2000, HPDDS3 Tape(local).Backup procedure:1. open SQL Server Enterprise Manager2. find the database i want to backup3. right click and select "All Tasks"-"Backup Databse..."4. Select "destination"-"backup to"-->>"Tape"5. Click "Add", Select "Tape" device name(or may address)"\.Tape0"6. Click "OK" begin to backupError:system prompt:The file on device '\.Tape0' is not a valid Microsoft Tape Formatbackup set. BACKUP DATABSE is terminating abormally.On this SAME server, using the same TAPE, but USE Tapeware(a HP backupsoftware come with HP tape machine) to back file, everything is OK.I don't have any clue about this. am new to Windwos, new to SQLserver. Any body could show me light? Thanks in advance.A.Y. From shanghai/China
View 6 Replies View RelatedHi!
i have a question regarding tail log backup.
I have set up logshipping between primary and secondary servers. Now when i want to fail-over to secondary, I am planning to take the tail log backup on primary
backup log primarydb
to disk=N'..',
with norecovery
and then I will restore this tail log backup to secondary
restore log secondarydb
from disk=N'',
with recovery
Will there be any issue with this approach?
Will I be able to recovery the primarydb if i want to, in future? Taking tail log backup doesnt cause any issues? Or do i need to take the full backup of primary before I take tail log backup..in case if I can not recover the primary db after taking the log backup?
How big the tail log backup can be? Will it be of similar size of other normal transactional log backups.?
Any help would be appreciated.
Thanks
Running SQL Server 2005 Standard Edition.
Database is in Full Recovery mode.
I have full backups scheduled weekly, differentails scheduled daily and tran log ackups scheduled for every 15 minutes.
The tran log backups only work for the first 40 minutes or so after the daily backup. Once the daily has occured, the tran backups will work again, but for only 40 minutes.
I run consistency checks on the db daily and there are no errors.
The error returned from the tran log backup is 'BACKUP LOG cannot be performed because there is no current database backup'
Any thoughts would be appreciated.
I have done a full backup on 3pm, and a differential backup on everyday 5pm.
I try to restore it back in my testing server and i encounter the problem in restoring the File3 and i try to restore the File 2 and it is okie. Can i know wat is the problem usually cause this error? Thank you
File 1: Full Backup
File 2: Differential Backup
File 3: Differential Backup
"Failure writing file <name here> - Test.mhtml : The network path was not found."
I have a report subscription. Delivery Options Credentials use NT account, and 'Path' is defined. We had NT security guys verify account has FULL rights to folders. We have even temp applied EVERYONE to have FULL. I cannot find any details on the failure in any RS logs, even after turning on 'remote errors' on server.
I suspect SSRS is using its SERVICE Account to connect to path, but again we have temp applied EVERYONE to have FULL rights and still get failure.
Any suggestions on where to look next would be apprciated.
I have a ForEach file enumerator that executes a data flow for every source file in a specified directory. If there are no files in the directory, the package executes with a result code of 0.
I need the package to fail if there aren't any files found in the specified load directory. Is there a simple way to do this with the SSIS component, or will I have to script the entire file enumeration process inside script tasks to handle this requirement?
Thanks in advance for any assistance with this question. Please post replies to this forum.
-Doug
The import from Flat File Source fails: Error 0xc02020a1: Data Flow Task 1: Data conversion failed.
The data conversion for column "ArticleName" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
(SQL Server Import and Export Wizard)
I have changed the size of the column "ArticleName" (varchar) to max but the error comes up again.
The data i want to import came with multiple flat files. They all could import properly but this one is a problem.
I am new to this, but have scoured the web and not found an answer to my question...
I have an execute process task that runs a simple batch file. When this batch file completes with an ERRORLEVEL greater than 0, I would like the task to fail. I thought this simply meant setting the "FailTaskIfReturnCodeIsNotSuccessValue" property to true, and setting the SuccessValue to 0. However, this does not appear to work.
Even with a simple batch file forcing the errorcode to 1 as follows, the task still completes "successfully".
SET ERRORLEVEL = 1
Any ideas? Thanks!
Using SQL Server 2005 Server Management Studio, I attempted to back up a database, and received this error:
Backup failed: System.Data.SqlClient.SqlError: Backup and file manipulation operations (such as ALTER DATABASE ADD FILE) on a database must be serialized. Reissue the satement after the current backup or file manipulation is completed (Microsoft.SqlServer.Smo)
Program location:
at Microsoft.SqlServer.Management.Smo.Backup.SqlBackup(Server srv)
at Microsoft.SqlServer.Management.SqlManagerUI.BackupPropOptions.OnRunNow(Object sender)
Backup Options were set to:
Back up to the existing media set
Overwrite all existing backup sets
I am fairly new to SQL 2005. Can someone help me get past this issue? What other information do I need to provide?
What is the difference between "Files aned File Groups" backup and Partial Backup?
Looks like both are same.. Please comment.
I got full backup on daily schedule its taking more space on Drive because each file has more than 25GB.I am using SLQ server 2008R2 so I'm looking to take the backup with compression instead of uncompressed Backup. What are the impacts of compressed backup. Is there any problems with compressed backup while restoring the backup file.
View 8 Replies View RelatedI should restore a SQL Server 2005 Database from backup. The backup contains three files, named user.bak0, user.bak1 and user.bak2.
How is the syntax of the restore filelistonly and the restore database ... ?
I usualy write
restore filelistonly from disk = 'path and filenam.bak'
restore database. zy
from disk = 'path and filename.bak'
with replace,
move.....
move....
This works but I cannot use it with a splitted backup file. The files are much too big to put together to one file.
Thanks in advance for any help.
My customer got a total hard drive failure.After sending it to drive recovery specialist we were able to recover the LDF log file (MyDB_0.LDF).But the MDF file was completely destroyed (MyDB.MDF).They have a good full backup from a month ago.
1) Installed SQL Server 2012 on a new PC
2) Created a new database of same name (MyDB) - with same MDF and LDF file names as original
3) Took the new database offline
4) deleted the MDF and LDF files of the new database
5) put "MyDB_0.LDF" in the place of the LDF file I just deleted
6) put the database back on-line
7) after hitting F5 to refresh databases - it shows "MyDB (Recovery Pending)"
8) tried to do Tail Log Backup with this command
BACKUP LOG [MyDB] TO DISK = N'C:BACKUPMyDB_TailLog.bak'
WITH NO_TRUNCATE
And I get this error...
Msg 3447, Level 16, State 1, Line 3
Could not activate or scan all of the log files for database 'MyDB'.
The sad thing is I know we can get this data back using ApexSQL-Log. I can see all the transactions since the last full backup in this program - so the log file is not damaged. But my client doesn't want to pay the $2000 fee for this software.There has to be a way to restore this data, without having to purchase a third party tool.
I checked quickly one network and I ran into the folders; I found out the folder MSSQL backup, nothing strange so far. Within that folder, anyway, I found out several backup and one very huge file (datawarehouse) with extension FILE. I am wondering what can be? I got datawarehouse mdf of course and datawarehouse log but what is that huge file (1 TB)?
View 6 Replies View RelatedHi,
I tried to backup the master key by the following syntax :
OPEN MASTER KEY DECRYPTION BY PASSWORD = 'mypassword'
BACKUP MASTER KEY TO FILE = 'c: empmaster' ENCRYPTION BY PASSWORD = 'mypassword'
but it failed and i got the following message:
Cannot write into file 'c: empmaster'. Verify that you have write permissions, that the file path is valid, and that the file does not already exist.
NB: I am using the "sa" user to execute this command.
I know that we have a security permission issue , but where and how ?
Regards,
Tarek Ghazali
SQL Server MVP
Hi there,
After a bad server crash, the only remnant we have of our SQL server database are the .mdf and .ldf files in the MSSQL7/Data folder. Can we restore this database from either of these files and if so, what is the procedure? Sorry but I'm an SQL server newbie.
Thanks in advance,
Paul
Hi,
I dropped a SPROC, and was in the process of reacreating it when I lost power. Now I don't have the SPROC except for in an old backup file.
Is there anyway to get this without restoring the DB ? If not, can I easily restore to a different DB name and then delete it? My backups are on my live server and I don't want to overwrite my current DB with my backup :)
thanks for any suggestions!!
mike123
I rigth click my project , i choose add -> new item -> sql database
and i write
SqlConnection cc = new SqlConnection(@"Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|DataData.mdf;Integrated Security=True;User Instance=True");
when i code
cmd.CommandText = "Backup database Data to disk = 'C:\123.bak'";
i recieve Error
Could not locate entry in sysdatabases for database 'Data'. No entry found with that name. Make sure that the name is entered correctly.
BACKUP DATABASE is terminating abnormally.
help me to solve this problem please!!!
Thanks.
One of my databases is approxiamtely 1.5 GB's but when I run a backup the backup file explodes to 38GB's.
What is the proper usage of Shrink Database, is this safe or is there another method to reduce the size?
I am using SQL Server 7 and have about 5 databases. One of them has a data file of about 10 Meg, and most of the others are larger. I do a nightly backup to both a local and mapped drive. On both, the size of the backup file for this database is more than 500 Meg, but the rest appear to be an appropriate size. Does anyone know why this would be happening? The database works fine, it does not get a lot of insert/delete activity and I run DBCC every weekend. If anyone has any ideas I would sure like to hear from them.
View 1 Replies View RelatedHi,
How can we create a new D/B from a D/B Backup file (DataBase.Bak).
Thanks,
Princy
Hi,
I am new to SqlServer (I am using 7.0) and I have just recieved a database.bak file from one of our clients and I want to create a new D/B from this back up file ,I have already installed the MS SqlServer. Can you tell me how to do this.
Thanks,
Princy
Anyone have anything hints on getting the option of DELBKUP to work. I have a maintenance job that backs up the database. Also set to delete backups older than 1 day. This doesn't seem to be working.
Any thoughts.
Thanking you in advance.
Is the name of the most recent backup file for each database stored anywhere in SQL2K? I want execute a SQA job periodically that takes the BAK from database A and restores it over database B (using the T-SQL RESTORE DATABASE procedure), but I need to know the exact name of the .BAK file; i.e. I need to know the yyyymmddhhmm value at the end of that file.
TIA,
Al
Is the name of the last backup file recorded anywhere in SQL2K? I do backups every 2 hours, and want to restore backups from database A to database B once a day using the latest backup. Unfortunately the backup files don't have the time the backup started (e.g. 1600), but have the time they ended (I presume); e.g. 1604.
I want to automate the process; any suggestions on how to find the name of the last database file?
TIA,
Al
Can you backup individual files within a file group.?
View 1 Replies View RelatedCan you backup individual files within a file group.?
View 1 Replies View RelatedHi,
I have a database which size is 64Go, and i backup it everyday with 1 day of retention.
But the maintenance plan don't delete the file older than 1 day.
This works fine for the other db.
Do you know what is the pb ?
regards.
I tried to use backup and restore database tasks to restore backup file but it does not work. The backup file I tried to restore in SQL server 2000 is from somewhere else (from my friend) and saved in cd-rom, not the one I created before.
How can I restore it to view in SQL server 2000 database?
Can you show me step by step?
Thanks for your help
Any easy way to compress backup file. I use SQL Server 2008 R2
View 3 Replies View RelatedHi all,
How can I see what is exact size of SQL server backup file while backup is running. The process is running for more than 2 hours, it is chewing up disk space (it already took about 20G), but the size of backup file is still showing as 0.
Thanks in advance
I would like to set up sort of schedule by using FTP to move database back up file from Production server to Staging server every night. Is someone telling me how to do this and any other good way to handle it? I appreciate help!
JQ