Backup Maintanence Plan Failed

May 18, 2007

Hello,



I created a backup maintanence plan which run good before. I am not sure why it didn't work now.

The error message from job history is:



05/18/2007 09:04:40,backupdbs.backupdbs,Error,0,PEPESQL2005PROD,backupdbs.backupdbs,(Job outcome),,The job failed. The Job was invoked by User RMWB3cs002291. The last step to run was step 1 (backupdbs).,00:00:00,0,0, 0
05/18/2007 09:04:40,backupdbs.backupdbs,Error,1,PEPESQL2005PROD,backupdbs.backupdbs,backupdbs,,Unable to start execution of step 1 (reason: line(1): Syntax error). The step failed.,00:00:00,0,0,,,,0



How to debug this problem?



Thanks

View 11 Replies


ADVERTISEMENT

Maintanence Plan - Backup Database Task

Jun 2, 2008

Hi Guys!

I am trying to create a 'scheduled back up database task'maintenance plan which has an option to 'overwrite backups' but with also the "Create a backup file for every database" option checked. Does anyone know how to do this?

Thanks Guys.

View 6 Replies View Related

Maitenace Plan Check Database Integrity Task Fails With Failed:(0) Alter Failed For Server 'xyz'

Feb 21, 2008



Hi,



I am administering several SQL Servers running SQL Server 2005 SP2 Build 3042.
I have a common maintenance plan that runs on each of the servers. The maintenance plan runs
fine on all the servers except for one. On the one server the Database Integrity check fails with the following error:


Check Database integrity on Local server connection
Databases: <list of databases>
Include indexes
Task start: 2008-02-21T00:05:42.
Task end: 2008-02-21T00:05:46.
Failed0) Alter failed for Server €˜XYZ€™

I created a test maintenance plan to just do the integrity check and selected one database only and this also failed with the same error message. I ran this test maintenance plan and configured it for each of the databases in question and it failed each time.
If I run the DBCC manually against the databases they all report fine.


I read some of the post that talked about the €œAllow Updates€? being set incorrectly but that does not apply to my problem since my configured and run values are set to 0.

Does anyone know what the problem could be?

View 23 Replies View Related

Should Full Backup And Transaction Backup Be From One Plan?

Mar 11, 2008

Hello, everyone:

I just heard that for restore purpose, ths full backup and transaction log backup should be from one maintenance plan. Otherwise transaction log backup files cannot be restored after restoring full backup files.

Is it true? Can anyone offer official documents?

In my system, full and transaction backups are from one maintenance plan. Restores are doing fine. I am not sure that ideal is true or not.

Thanks

ZYT

View 2 Replies View Related

How Often To Do Certain Maintanence Tasks.

Jul 29, 2004

Hi,

I just volunteered to be the database administrator of our new sql server. I am normally the programmer so I have little experience with database administration. There are some basics that I need some assistance with mainly when to perform various maintanence checks. For example, how often do I need to perform some of the dbcc commands that I have read about? How often do I check for data integrity, index fragmentation, rebuilding indexes, or defrag indexes?

I have to come up with a plan by tomorrow and I don't know if I have anything solid enough since I don't exactly know when to perform some of these tasks. :confused:

Thanks so much for your advice.

View 5 Replies View Related

SQL Maintenace Plan Failed

Aug 23, 2004

I have set SQL Database Maintenance plan in SQL Server 2000. it ws working fine but now it didnt work and fails everytime. can anyone advise me how to identify the reason why its not working.

View 5 Replies View Related

Database Maintanence Plans

Mar 13, 2007

how can i move the database maintanence plans from one server to another server ?


Thanks

View 1 Replies View Related

SQL 2012 :: Error (backup Failed To Complete The Command BACKUP LOG) In Event Viewer

Aug 23, 2013

On the SQL Server the Event Viewer shows the same messages and errors every evening between 22:05:00 and 22:08:00. The following information messages are shown for every database:

"I/O is frozen on database <database name>. No user action is required. However, if I/O is not resumed promptly, you could cancel the backup."

"I/O was resumed on database <database name>. No user action is required."

"Database backed up. Database: <database name>, creation date(time): 2003/04/08(09:13:36), pages dumped: 306, first LSN: 44:148:37, last LSN: 44:165:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'{A79410F7-4AC5-47CE-9E9B-F91660F1072B}4'}). This is an informational message only. No user action is required."

After the 3 messages the following error message is shown for every database:

"BACKUP failed to complete the command BACKUP LOG <database name>. Check the backup application log for detailed messages."

I have added a Maintenance Plan but these jobs run after 02:00:00 at night.

Where can I find the command or setup which will backup all databases and log files at 22:00:00 in the evening?

View 9 Replies View Related

Database Maintenance Plan Failed

Mar 4, 2002

Hi all-

I have a database maintenance plan set up to run for user databases. The integrity checks job for a user database failed today with the error 'error 7919 Repair cannot be processed, db must be in single user mode' . I have scheduled the job to run once every week. Is this a bug in sql server 2000? I thought that the db is placed into single user mode when the integrity job starts. Please advise.



Thanks,
ndba

View 2 Replies View Related

Backup Failed (Error 3041) While Try To Issue A BACKUP Statement In Local

Feb 9, 2004

Hi,

I use the Transact-SQL BACKUP statement in Visual Basic to backup my local MSSQL Database. It give me this error

Error 3041

BACKUP failed to complete the command BACKUP DATABASE [BCFPC] to BCFPCBKP

I already created a backup device called BCFPCBKP and it is backup to the disk.

I tried to run the same BACKUP statement in SQL Query Analyzer and it worked fine. I tried to run my VB application in another PC. It worked fine when i use this command remotely. Can anyone tell me what's the problem?

Thanks in advance

regards,
M.Y. Yap

View 2 Replies View Related

Backup Failed: System.Data.SqlClient.SqlError: Backup And File Manipulation... Must Be Serialized

Jul 11, 2007

Using SQL Server 2005 Server Management Studio, I attempted to back up a database, and received this error:

Backup failed: System.Data.SqlClient.SqlError: Backup and file manipulation operations (such as ALTER DATABASE ADD FILE) on a database must be serialized. Reissue the satement after the current backup or file manipulation is completed (Microsoft.SqlServer.Smo)



Program location:

at Microsoft.SqlServer.Management.Smo.Backup.SqlBackup(Server srv)
at Microsoft.SqlServer.Management.SqlManagerUI.BackupPropOptions.OnRunNow(Object sender)



Backup Options were set to:

Back up to the existing media set

Overwrite all existing backup sets



I am fairly new to SQL 2005. Can someone help me get past this issue? What other information do I need to provide?

View 11 Replies View Related

Backup Plan

Aug 13, 2006

I am having a hard time setting up a backup plan for my sql server databases. Right now I create a copy of each database on another machine on the network once a day. Once a week I upload a MSAccess version to a remote site. Obviously there are huge amounts of potential data loss if a crash of some sort would occur locally.

My new plan is looking like this:

1) Run a complete database backup once a day

2) Run Transaction Log backups every hour

My questions are as follows:

1) What role does a "Backup Device" play in this process (I currently do everything through the Enterprise Manager interface)?

2) I am having a hard time scheduling mydatabase_complete.bak and mydatabase_trans.TRN at all. I get several errors.

3) I would like to run these backups on another network machine but am not seeing how to access "My Network Places" from the "Backup Database" utility in Enterprise Manager.

Any help in the form of answers or pointing me towards a useful resource for this process would be much appreciated!

Thanks in advance~

View 1 Replies View Related

Help With Backup Plan

Feb 7, 2004

Hi all,

I am new to SQL and was given a SQL server to administer. There are lots of databases on the server and no one seems to know which one is used and which one is not. I try to do some cleanning.

1. Can I find out if there is any activity on a database so I can delete them off and how?

2. There are backup jobs that run every night which do a full backup. I am thinking of changing it to do full backup once a week and differential every night. These databases are updated daily. Some have lots of activities, some have less. Does that sound reasonable? and if I do differential backup, should I create separate back up file or should I add on to the full backup file?

Any comments or suggestions are greatly appreciated.

View 2 Replies View Related

Backup Plan

Jan 6, 2008

I would like to implement the following backup strategy in SQL Server 2000:
full backup is done once a week
diff backup daily
tran backup every hour


How should I approach this. Should I use a backup device linked to a hard disk file? Should I create a backup device for each type of backup (full, diff, tran) and schedule it. If I use a backup device how do I distinguish each backup for old backups.

thanks

View 4 Replies View Related

SQL Server 2005 Maintenance Plan Failed To Run

Sep 19, 2007

I created a database maintenance plan on sql server 2005 (standard SP2, cluster environment). The plan created successfully on scheduled successfully. But when execute the plan, it fails. Here is the information in the log:

The last step to run was step 1 (TranLog backup).,00:00:01,0,0,,,,0
09/19/2007 12:06:38,Tranlog backups.TranLog backup,Error,1,LAIWWORKSITE1LA,Tranlog backups.TranLog backup,TranLog backup,,Executed as user: STROOCKSQLSRV. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 12:06:38 PM Warning: 2007-09-19 12:06:39.27 Code: 0x80012017 Source: Tranlog backups Description: The package path referenced an object that cannot be found: "PackageTranLog backup.Disable". This occurs when an attempt is made to resolve a package path to an object that cannot be found. End Warning DTExec: Could not set PackageTranLog backup.Disable value to false. Started: 12:06:38 PM Finished: 12:06:39 PM Elapsed: 0.688 seconds. The package execution failed. The step failed.,00:00:01,0,0,,,,0

Any ideas? Thanks.

View 1 Replies View Related

Backup Failed To Complete The Command Backup Database

Aug 4, 2007

Backup failed to complete the command backup database [ ] TO VIRTUAL DEVICE = ' { 853D3FC0 - 45EA -85B1 - 54F0EA379CAC } 24 ' WITH SNAPSHOT , BUFFERCOUNT = 1 , BLOCKSIZE = 1024

View 1 Replies View Related

Maintenance Plan To Backup DB

Jan 24, 2002

Are there any known issues using Maintenance Plans to backup DBs in SQL Server 7.0

Thanks

View 1 Replies View Related

Backup Maintenace Plan

Apr 17, 2000

I made a backup maintenace plan in sql7.0, but it doesn´t work. The message included on the event logger is:

SQLServerAgent
SQL Server Scheduled Job
'DB Backup Job for DB Maintenance Plan 'Teste''
(0x219C5CB03C11D4119D8F0020188D7311) -
Status: Failed - Invoked on: 4/17/00 3:25:00 PM - Message:
The job failed. The Job was invoked by Schedule 12 (Schedule 1).
The last step to run was step 1 (Step 1).


And before this message there is another one that can be making something goes wrong:


SQLServerProfiler
Executable: C:WINNTsystem32mmc.exe
Description: Unable_To_Set_RegKey_Val
Source: ........srceventlog.c
Line: 315


Someone can help me telling me the reason that is generating this kind of error and doesn´t work. I have do the same think in others two server and there it works ok.
Thanks in regards

Sandra Lino

View 1 Replies View Related

Maintenance Plan Backup

Feb 23, 2000

I am doing full backups on 25 databases nightly using the SQL maintenance plan. Recently I have started getting the backup process hung on one database, so the whole plan does not finish. The job shows as executing, but nothing is being done, and nothing has been written to disk for this database. The SQL logs show a DBCC TRACEON 208, but the process it refers to is using another database. The NT logs do not show anything going on either. Additionally the backup process will not die when it is killed. They only way to make it go away is to stop and start the SQL Server. The system is a quad Pentium 450, 2Gig of ram, and plenty of disk space. It is NT SP5, SQL7 SP1. The DB is about 8.2 Gig. There are no other jobs scheduled to run at the time the backups run. Does anyone have any ideas what would be causeing the process to hang? Also what is a trace flag 208, it is not listed in BOL. Thanks for your help.

View 1 Replies View Related

Backup Maintenance Plan

Feb 7, 2003

I have a maintenance plan that I use to backup some of my databases and transaction logs. I have "Check Database Integrity" checked. If the database is being used by anyone when the backups are being performed, the check issues an error because the DB cannot be put into single user mode and then skips the backup. In the Plan, I have unchecked the box for "Perform these checks before backing up the database or transaction file" and apply the change. When I go back into the plan, the option is checked again. How can I get around this problem?

Thanks,
Ken

View 1 Replies View Related

Backup Maintenance Plan

Mar 21, 2002

I have a maintenance plan where I backup the system databases and my application databases every night. Once a week I do a Check Database Integrity. For the Master and MSDB databases, it errors out telling me that the database must be in single user mode. I thought that the maintenance plan would switch the DB to single user mode when it needed to perform its checks. Any suggestions on how to get this to work successfully?

Thanks,
Ken Nicholson

View 1 Replies View Related

Backup Vs. Maintenance Plan

Sep 6, 2001

I'm running sql server 2000. All the backups created through the Maintenance Plan failed (no specific error code), whereas backups created by itself (through database name => All Tasks => Backup database...) run fine. Does anybody have a clue why the Maintenance backup failed or how to trouble shout the problem?

The reason I want to make the backups from maintenance plan to work is that each backup will have a unique name and I can schedule to remove the old backup files from the system.

View 5 Replies View Related

Maintenance Plan: Backup

Jun 21, 2006

Hi,

I have made a maintenance plan to backup a database.

The file name is like this: name_db_200606211209.BAK

isn 't it possible to get the filename to be always the same
(without 200606211209)

I have unchecked the checkbox to remove files older than x-days
but it still appends 2006... to it

View 3 Replies View Related

How To Set Up A Stable Backup Plan?

Oct 17, 2006

Our database is more than 20,000,000 bytes and increase largely everyday

who can give me some advise about stable backup?

My database is sqlserver2005 and now i use files to backup including full backup and diff backup,whether is better to use device?

any ideas? thanks in advance

View 5 Replies View Related

Backup Plan SQL 2000

Aug 21, 2007

Hello all,
I would like to be able to backup our databases to a network share mapped drive. Is this possible? When every I go in to setup a maintenance plan it will only allow me to select local drive as the backup location. If my server crashes its not going to do a whole lot of good if my databases are stored locally (I do also backup up to tape every niight). I backup the databases every hour to local disk and would like to send them to one of my MS Storage Servers on the network.
Any help would be greatly appreciated.

thanks
Jason

View 3 Replies View Related

Maintenacen Plan Backup Problem

Jun 12, 2002

Hi:

Set up a Maintenance Plan backup job that is set to delete the backup file after 19 hours but it waits until another SQL backup job is completed before deleting the old backup file 27 hours later. (NT4 server, SQL7 SP1). Therefore the server requires space for two complete SQL backups just to hold one SQL backup. Not an issue when you have enough disk space but on very large databases 45GB+ it results in alot of wasted space.

The current workaround is to manually schedule the backup jobs TO DISK = with a nightlybackup.BAK filename. Then another job deletes that backup file at a specific time. Would like to use the maintenace plan for the detailed time stamp it labels the backup file. Any suggestions?

Thanks,

View 1 Replies View Related

Need A Reliable Backup Plan Fro SQL 2000

Nov 22, 2002

I have set up two Maintenance Plans to do daily backups overnight for our two DBs that are on our SQL server.

As a separate strategy we want to have a second backup done nightly that would involve
#1 detach the db(s)
#2 copy the mdf(s) and ldf(s) to L:xxx
#3 attach the db(s) again
#4 zip up the db(s)
#5 copy the files to a different server for storage.

I created #1, and #3 in query analyzer and saved the script.

I want the process to run at say 2AM and don't know how to schedule them to run - that is #1 ... #2 ... #3. Anyone have sample scripts for this kind of a backup strategy?

This seems like a very simple process especially for a restore and especially since there would not be any trasaction logs involved. This way if we had a KRASH we could take the backup from the separate server and install it on a warm SQL backup server.

Apart from the new servers name then what other steps would I need to cover to get the apps up and running in the quickest time. The app software runs as a client install - Access 97DB] I'm especially curious if I need to have more than a fresh MS2000 SQL server install.

I'm know I'm asking a lot for a first timer.
It seems we want to handle disaster recovery BEFORE we even have our first system crash.

many thanks

View 11 Replies View Related

Maintenance Plan --&> Backup --&> With Init?

Dec 10, 2003

Good morning.

We are running SQL Server 2000 with SP3. I have recently created a DB Maintenance Plan to backup all of our databases nightly to a local tape drive, and verify the backup of those databases. The backup plan itself runs fine.

The first time it ran, it ran in a little over an hour. Since then, I have noticed the time increasing nightly to the point that last night's backup took 8 hours. Our databases are not that big and do not have enough transactions to cause such a drastic change in a matter of weeks.

Investigating the problem, I have found that the issue lies in the fact that the tape is not initializing each night, and thus each night's backup is appending to an increasingly more full tape.

My question is this: Is there a way to force a DB Maintenance Plan to initialize the tape each night? I know that I can probably add a "with init" command to the T-SQL statement created, but I am not sure exactly where to fit it in. Does anyone have any suggestions?

Thank you for your time.

Michael

View 1 Replies View Related

SQL 2005 Backup Maintenance Plan

Jul 9, 2007

Hi there

I feel like a complete nitwit. I've been using SQL 2000 for about 5 years now and regularly set up automatic backups using the wizard for many people. I'm in no way an advanced user and have enjoyed some of the more user-friendly features of SQL 2000 such as the backup wizard.

Well now we have SQL 2005 and I can't find the "wizard". I did a lot of googling and found very little on this. The frustration is mounting - let alone the fact that I had to edit the registry just to be able to perform a manual backup in the first place... :-(

Apparently their is a "maintenance plans" folder but the only place I can find this is under "Legacy" and you can't create jobs there.

Has anybody else had this issue? Is there a bug in SQL 2005? I reinstalled the full version with all options selected and still can't find this folder. Am I just being completely "blonde"?

View 4 Replies View Related

Backup Maintenance Plan - Best Practices

Apr 11, 2007

Hi All,

I'm about to embark on creating a maintenance plan to back up all databases on one of our SQL 2005 servers. I am looking for some advice on best practices for doing this.

I have it in my mind that i want to be taking a full database backup once a week, with differential backups on a daily basis and transactional backups performed every 2 to 4 hours.

Do i need to create three maintenance plans for this, i.e. 1 for full, 1 for differential, and 1 for transactional?

If i want to only keep the backups from the last week, is this done by setting up a maintenance cleanup task in the full backup plan to clear all bak files that are a week old?
If so i'll also probably require one to remove the trn files also.

When using the backup command from the context menu in SSMS there is an option to name the backup set. How does this work when using maintenance plans as i haven't been able to find this option whilst trying out some of the features?

I'm sure to have more questions on this subject, but any help on the above queries would be most appreciated.

TIA,

Grant

View 1 Replies View Related

SQL 2005 Backup Maintenance Plan

Feb 16, 2007

In SQL 2005...

How do I specifty in the maintenance plan to only keep 3 days worth of backup.

Andre

View 4 Replies View Related

How To Overwrite The DB Backup For Multiple DB In A Plan

Oct 19, 2007

I have to created a Maintenance Plan in SQL 2005 to take the backup of 5 different DB at 2AM everyday. Each DB has its own sub-directory and backup file The total DB size is 35GB. I need to overwrite the exsisting backup instead of having new backup everytime.

View 4 Replies View Related

Failed Maintenance Plan [SQLSTATE 42000] (Error 22029)

Apr 9, 2001

We have a maintenance plan that runs every 15 minutes to backup a transaction log. It fails intermittantly with the message:
"sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed."
This is the only error message to be found in any of the logs. I've checked event viewer, the SQL error logs, exception log, maintenance plan log, sysdbmainplan_history table in msdb, but can't find any extra information. I checked the MSDN for info on this error and this did not add any extra light on the problem.
Does anyone have any ideas on how to de-bug this error?
regards
Stuart Ainsley

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved