I have a problem running a batch file, now the problem is that when i run the batch file the command prompts the user for an input, but I have all the output of the bat file going into a log file. So when i run the bat file the process just sits there until i hit the 'y' key or unless i nput sumthin manually. This is a problem becuase this batch file is running on the UAT server as a job and there is no one there to input once the job is running. The commnd in the batch only requires an input once a month.
for eg if run: launch_scrt.bat and i want to put sum parameters such as 'y' or 'n' to avoid the manual input once the job is running. Any ideas?
I have tried asking the same question in other forums. All i get is links
Please help me. I have the following requirement:
I have the following tables: Theater - TheaterId, TheaterName, Revenues,locationid, stateid State - StateId, StateName Location - LocationId, LocationName, StateId
I want to generate reports that will tell me the revenue generated for each theater in each location in a state. I want to run a batch process which will loop through the 3 tables and will passing the location and state id as parameters one by one. I want each report to be generated as a pdf and stored in a location. How do I do this?
Hello everyone,I have around 20 reports in an ASP web-application which connects to aSQL Server 2000 dB, executes stored procedures based on inputparameters and returns the data in a nice tabular format.The data which is used in these reports actually originates from a 3rdparty accounting application called Exchequer. I have written a VBapplication (I call it the extractor) which extracts data fromExchequer and dumps the same into the SQL Server dB every hour. Therunning time for the extractor is an average of 10 minutes. Duringthese 10 minutes, while the extractor seems to run happily, my ASPweb-application which queries the same dB that the extractorapplication is updating becomes dead slow.Is there anyway I can get the extractor to be nice to SQL Server andnot take up all its resources so that the ASP web-application users donot have to contend with a very very slow application during thosetimes?I am using a DSN to connect to the dB from the server that runs theweb-application and well as the other server which runs extractor.Connection pooling has been enabled on both (using the ODBCAdministrator). The Detach Database dialog gives me a list of openconnections to the dB. I have been monitoring the same and I havenoted 10-15 open connections at most times, even during the executionof extractor.All connection objects in the ASP as well as VB applications areclosed and then set to nothing.This system has been in use from 2002. My Data file has grown to 450MBand my Transaction Log is close to 2GB. Can the Transaction Log be aproblem. For some reason, the size of the Transaction Log does not godown even after a complete dB backup is done. Once a complete dBbackup is done, doesn't the Transaction Log lose its significance andcan be actually deleted? Anyway this is another post I'm doing todayto the group.In the extractor program,1) I create a temporary table2) I create an empty recordset out of the table3) I loop through the Exchequer records using Exchequer's APIs, addingrecords into the recordset of the temporary table as I go along.4) I do an UpdateBatch of the Recordset intermitently5) I open an SQL Transaction6) I delete all records from the main table7) I run a INSERT INTO main_table SELECT * FROM #temp_table8) I commit the transactionI hope that the information is sufficientThanksSam
I have a SSIS package with the last three tasks in the control flow are stopping the SSAS, then "on success" the second last task is execute a batch file to copy a bunch of files to a remote server using the robocopy command, then "on success" the last task is to start the SSAS. I test all three tasks individually and they are all working fine. The problem is in-between the second last task and the last task, the second last task is to execute a batch file and then forward to the last task. The task just moved to the last task once the batch file is executed and it did not wait until the actual robocopy job is completed. Therefore it caused a problem in the robocopy process. Thanks.
I have an "execute process" task which executes a perl script. When I run the task, it shows a prompt with the message "the publisher can not be verified". It gives the option to continue the task or to cancel.
The problem for me is that I want to schedule this package to run automatically, and I don't want the automated process to show this dialog. I need to override the security setting and have SSIS execute my batch scripts without prompting. Assuming I don't want to rewrite the Perl code into a script task, is there a way to do acomplish this?
Trying to run a SSIS package from a SQL job, and the package itself has a step that calls a process task that runs a batch file. The syntax in the process task I have is the following:
executable: c:windowssystem32cmd.exe Arguments: /C e:SungardPTAencryptfile.bat Working Directory: e:sungardpta
I keep getting the following in my log:
PackageStart,MIMKEIMC11N,MI rustserviceadmin,PTADailyTransactionExtract,{46F7381F-B345-47DC-BFC0-17CCF02A935A},{F82C7944-D28C-4F70-8CB7-F0BD7ED748D2},1/29/2008 1:59:11 PM,1/29/2008 1:59:11 PM,0,0x,Beginning of package execution. OnError,MIMKEIMC11N,MI rustserviceadmin,EncryptFiles,{FCF5B653-CC05-4183-981B-F5EF4906DD09},{F82C7944-D28C-4F70-8CB7-F0BD7ED748D2},1/29/2008 1:59:12 PM,1/29/2008 1:59:12 PM,-1073573551,0x,In Executing "c:windowssystem32cmd.exe" "/C e:SungardPTAencryptfile.bat" at "e:sungardpta", The process exit code was "1" while the expected was "0". OnError,MIMKEIMC11N,MI rustserviceadmin,PTADailyTransactionExtract,{46F7381F-B345-47DC-BFC0-17CCF02A935A},{F82C7944-D28C-4F70-8CB7-F0BD7ED748D2},1/29/2008 1:59:12 PM,1/29/2008 1:59:12 PM,-1073573551,0x,In Executing "c:windowssystem32cmd.exe" "/C e:SungardPTAencryptfile.bat" at "e:sungardpta", The process exit code was "1" while the expected was "0". OnTaskFailed,MIMKEIMC11N,MI rustserviceadmin,EncryptFiles,{FCF5B653-CC05-4183-981B-F5EF4906DD09},{F82C7944-D28C-4F70-8CB7-F0BD7ED748D2},1/29/2008 1:59:12 PM,1/29/2008 1:59:12 PM,0,0x,(null) PackageEnd,MIMKEIMC11N,MI rustserviceadmin,PTADailyTransactionExtract,{46F7381F-B345-47DC-BFC0-17CCF02A935A},{F82C7944-D28C-4F70-8CB7-F0BD7ED748D2},1/29/2008 1:59:12 PM,1/29/2008 1:59:12 PM,1,0x,End of package execution.
Can a batch file that resides on another server be executed from a different machine? I have a batch file that resides on a server that I would like to run using SQL 2005 Integration Services. Is there anything I can do that would allow me to remotely execute this batch file and have it run in that environment.
BATCH FILE:
cd C:Trandev otrun -at OTRecogn.att -DINPUT_FILE=%1 -tl 1 -cs dv -lg mylog -I C:Trandev represents the remote environment
I have tried mapping the remote machine to a network drive on my local machine and using that drive to execute the batch file in an Execute Process Task, but it does not work.
SSIS:
I have a FOR EACH loop grabbing files and writing fileName to a variable that is passed to the Process Task as an argument through an expression(%1 in the batch file above). The Working Directory is a mapped network drive. The Executable is also a network drive plus batch file name.
Any help would be appreciated.
My computer is a HP Compaq dc7100, 512mb RAM, WindowsXP
I have a remote batch file on machine B that I need to execute using 'Execute process task' control from a package on machine A. The batch file uses pgp software and encrypts a file sitting on machine B itself. The reason why my batch file is sitting on machine B, is because the PGP software is on machine B.
If I execute the batch file by itself from machine B, the script runs fine. I refer the same batch file as a UNC path from my package on machine A. But that does not work since the 'Working directory' is still machine A. I can not set machine B's folder as the working dir because it does not accept UNC path. So I say, ok , let me map a path to that UNC location and map it as drive 'Z:'. Certainly if I do so, I will be running the process on machine A and the batch file will look for the pgp software on machine A, and hence fail.
I have tried third party remote batch execution tools (PSEXEC) but have not had success, not because of SSIS limitations, but simply because the PGP executable when run through the PSEXEC tool, does not identify the location of the public keys on machine B and hence gives an encrytion failure.
How do I get the remote batch file to execute such that it executes with its own env? Is there a better remote execution tool I can try or are there any other features of SSIS I can use to get around this issue? I need the results of the batch file and hence do not want to make it an asyncronous process.
Setup is a common VB.NET application, SQL back, with 5-10 users. Occassionaly from another VB.NET app, I'll need to run a process to upload and insert a handful of records. The records are somewhat large with 100+ fields that require a handful of SELECT and UPDATE statements making the server 'busy' for several minutes.
Independently, the Main application and the Upload application work just fine. It's only when users are active in the main application during the time of the 'upload' process. It's almost as if they 'bump' into each other and the server throws up errors on either app even simple SQL statements. The same tables are being queried, but it doesn't feel like a concurrency issue.
Are these problems expected when running somewhat of a high load? Any ideas on how to make these guys work together without them fighting? Shouldn't SQL be able to handle the statements even during the barrage of update queries and requests? What happens in situations with hundreds or even thousands of users simultaneously accessing?
I am new to this, but have scoured the web and not found an answer to my question...
I have an execute process task that runs a simple batch file. When this batch file completes with an ERRORLEVEL greater than 0, I would like the task to fail. I thought this simply meant setting the "FailTaskIfReturnCodeIsNotSuccessValue" property to true, and setting the SuccessValue to 0. However, this does not appear to work.
Even with a simple batch file forcing the errorcode to 1 as follows, the task still completes "successfully".
I need to take a variable from a tabel in SQL Server pass to a Batch file and execute the batch file. Right now I can exec the batch file with XP_CMDSHELL but how can I pass the variable to the batch file and loop through all the variables.
I was trying to extract data from the source server using OLEDB Source and SQL Server Destination when i encountered this error:
"Transaction (Process ID 135) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.".
What must be done so that even if the table being queried is locked, i wouldn't experience any deadlock?
Hello all, I am running into an interesting scenario on my desktop. I'm running developer edition on Windows XP Professional (9.00.3042.00 SP2 Developer Edition). OS is autopatched via corporate policy and I saw some patches go in last week. This machine is also a hand-me-down so I don't have a clean install of the databases on the machine but I am local admin.
So, starting last week after a forced remote reboot (also a policy) I noticed a few of the databases didn't start back up. I chalked it up to the hard shutdown and went along my merry way. Friday however I know I shut my machine down nicely and this morning when I booted up, I was in the same state I was last Wenesday. 7 of the 18 databases on my machine came up with
FCB:pen: Operating system error 32(The process cannot access the file because it is being used by another process.) occurred while creating or opening file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf'. Diagnose and correct the operating system error, and retry the operation. and it also logs FCB:pen failed: Could not open file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf for file number 1. OS error: 32(The process cannot access the file because it is being used by another process.).
I've caught references to the auto close feature being a possible culprit, no dice as the databases in question are set to False. Recovery mode varies on the databases from Simple to Full. If I cycle the SQL Server service, whatever transient issue it was having with those files is gone. As much as I'd love to disable the virus scanner, network security would not be amused. The data and log files appear to have the same permissions as unaffected database files. Nothing's set to read only or archive as I've caught on other forums as possible gremlins. I have sufficient disk space and the databases are set for unrestricted growth.
Any thoughts on what I could look at? If it was everything coming up in RECOVERY_PENDING it's make more sense to me than a hit or miss type of thing I'm experiencing now.
Dear list Im designing a package that uses Microsofts preplog.exe to prepare web log files to be imported into SQL Server
What Im trying to do is convert this cmd that works into an execute process task D:SSIS ProcessPrepweblogProcessLoad>preplog ex.log > out.log the above dos cmd works 100%
However when I use the Execute Process Task I get this error [Execute Process Task] Error: In Executing "D:SSIS ProcessPrepweblogProcessLoadpreplog.exe" "" at "D:SSIS ProcessPrepweblogProcessLoad", The process exit code was "-1" while the expected was "0".
There are two package varaibles User::gsPreplogInput = ex.log User::gsPreplogOutput = out.log
How do I use the execute process task? I am trying to unzip the file using the freeware PZUnzip.exe and I tried to place the entire command in a batch file and specified the working directory as the location of the batch file, but the task fails with the error:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC0029151 at Unzip download file, Execute Process Task: In Executing "C:ETLPOSDataIngramWeeklyUnzip.bat" "" at "C:ETLPOSDataIngramWeekly", The process exit code was "1" while the expected was "0".
Then I tried to specify the exe directly in the Executable property and the agruments as the location of the zip file and the directory to unzip the files in, but this time it fails with the following message:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC002F304 at Unzip download file, Execute Process Task: An error occurred with the following error message: "%1 is not a valid Win32 application".
The command in the batch file when run from the command line works perfectly and unzips the file, so there is absolutely no problem with the command, I believe it is just the set up of the variables on the execute process task editor under Process. Any input on resolving this will be much appreciated.
I am designing a utility which will keep two similar databases in sync. In other words, copying the new data from db1 to db2 and updating the old data from db1 to db2.
For this I am making use of the 'Tablediff' utility which when provided with server name, database, table info will generate .sql file which can be used to keep the target table in sync with the source table.
I am using the Execute Process Task and the process parameters I am providing are:
The customer.bat file will have the following code: tablediff -sourceserver "LV-SQL5" -sourcedatabase "TC_CTI" -sourcetable "CUSTOMER_1" -destinationserver "LV-SQL2" -destinationdatabase "TC_CTI" -destinationtable "CUSTOMER" -f "c:SQL_bat_Filessql5TC_CTIsql_filescustomer1"
the .sql file will be generated at: C:SQL_bat_Filessql5TC_CTIsql_filescustomer1.
The Problem: The Execute Process Task is working fine, ie., the tables are being compared correctly and the .SQL file is being generated as desired. But the task as such is reporting faliure with the following error :
[Execute Process Task] Error: In Executing "C:SQL_bat_FilesSQL5TC_CTIpackage_occurrence.bat" "" at "C:Program Files (x86)Microsoft SQL Server90COM", The process exit code was "2" while the expected was "0". ]
Some of you may suggest to just set the ForceExecutionResult = Success (infact this is what I am doing now just to get the program working), but, this is not what I desire.
I'm pulling data from Oracle db and load into MS-SQL 2008.For my data type checks during the data load process, what are options to ensure that the data being processed wouldn't fail. such that I can verify first in-hand with the target type of data and then if its valid format load it into destination table else mark it with error flag and push into errors table... All this at the row level.One way I can think of is to load into a staging table then get the source & destination table -column data types, compare them and proceed.
should I just try loading the data directly and if it fails try trouble shooting(which could be a difficult task as I wouldn't know what caused error...)
I am having this table locking issue that I need to start paying attention to as its getting more frequent.
The problem is that the data in the tables is live finance data that needs to be changed and viewed almost real time so what I have picked up so far is that using 'table Hints' may not be a good idea.
I have a guy at work telling me that introducing a data access layer is the only way to solve this, I am not convinced but havnt enough knowledge to back my own feeling up. (asp system not .net).
Hi, I'm trying to upload the ASPNETDB.MDF file to a hosting server via FTP, and everytime when it was uploaded half way(40% or 50%) I would get an error message saying: "550 ASPNETDB.MDF: The process cannot access the file because it is being used by another process" and then the upload failed. I'm using SQL Express. Does anybody know what's the cause? Thanks a lot
Hi. When I try to start a package manually clicking the Start Debugging button I get this after a little while:
Cannot process request because the process (3880) has exited. (Microsoft.DataTransformationServices.VsIntegration)
How can I prevent this from happening? This happens every time I want to start the package and every time the process id is different. Here it is 3880.
I am using the following batch file to execute a script that creates a db and all its objects in the local sql express:
sqlcmd -S (local)SQLExpress -i C:CreateDB.sql
This works fine, but I'm wondering if there's an easy way to put the script in the batch file, so users don't have to worry about putting the script in the C drive. I tried getting rid of the i parameter and pasting the script from the sql file into the batch file, but it didn't work.
I have had a full lock on my sql server and I have a few logs to found the origin of the lock.
I know the process at the head of the lock is the 55 process.
Here are the information I have on this process: Spid 55 55 ecid 5 5 Ecid 0 0 ObjId 0 1784601646 IndId 0 0 Type DB PAG Resource 1:1976242 Mode S IS Status TransID GRANT GRANT TransID 0 16980 TransUOW 00000000-0000-0000-0000-000000000000 00000000-0000-0000-0000-000000000000
lastwaittype PAGEIOLATCH_SH CMD AWAITING COMMAND Physycal id 1059 Login time 2007-07-05 04:29:53.873 nat address DFF06EBF974D Wait type 0x0046 HostName . BlkBy . DBName grpprddb CPUTime 54331 DiskIO 1059 ProgramName
Would someone know a way to identify the origin of the process 55?
I have already tried to execute the following request: select * from SYSOBJECTS where id=1784601646
I have a File System Task Copy file operation to copy a file in an SSIS package. The package when scheduled as a job fails with the following error:
The process cannot access the file 'C:ETLConsignmentAppleAppleRawFile.txt' because it is being used by another process.".
However when I right click on the package and execute it manually from the Integration Services it runs successfully without any problem. I am not certain on how to resolve this issue any inputs will be much appreciated.
Error: 0xC002F304 at Rename file 1, File System Task: An error occurred with the following error message: "The process cannot access the file because it is being used by another process.".
When running two File System Tasks after each other, with the same file, the file is still locked when running the second task. Resulting in an error: 0xC002F304 at Rename file 1, File System Task: An error occurred with the following error message: "The process cannot access the file because it is being used by another process.".
I found a workaround by addind a Execute Process Task before the second File System Task that pings to the localhost. This results in a 5 second delay, but there must be a better solution. Anyone?
i'm going nuts with SQL server notification thing. I have gone throigh this artical which tells how to set user http://www.codeproject.com/KB/database/SqlDependencyPermissions.aspx. This article show how to create new user and setup for sql server notification.But In my case user was alredy existing in database. which is very common senario in most cases. So i did following( check the SQL script below) but then i get this error "A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)" this my sql script use [master]Go -- Ensuring that Service Broker is enabled ALTER DATABASE [DatabaseName] SET ENABLE_BROKERGO -- Switching to our databaseuse [DatabaseName]GO CREATE SCHEMA schemaname AUTHORIZATION usernameGO ALTER USER username WITH DEFAULT_SCHEMA = schemaname GO /* * Creating two new roles. We're not going to set the necessary permissions * on the user-accounts, but we're going to set them on these two new roles. * At the end of this script, we're simply going to make our two users * members of these roles. */EXEC sp_addrole 'sql_dependency_subscriber' EXEC sp_addrole 'sql_dependency_starter' -- Permissions needed for [sql_dependency_starter]GRANT CREATE PROCEDURE to [sql_dependency_starter] GRANT CREATE QUEUE to [sql_dependency_starter]GRANT CREATE SERVICE to [sql_dependency_starter]GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_starter] GRANT VIEW DEFINITION TO [sql_dependency_starter] -- Permissions needed for [sql_dependency_subscriber] GRANT SELECT to [sql_dependency_subscriber] GRANT SUBSCRIBE QUERY NOTIFICATIONS TO [sql_dependency_subscriber] GRANT RECEIVE ON QueryNotificationErrorsQueue TO [sql_dependency_subscriber] GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_subscriber] -- Making sure that my users are member of the correct role.EXEC sp_addrolemember 'sql_dependency_starter', 'username'EXEC sp_addrolemember 'sql_dependency_subscriber', 'username'
Hi I am using VWD 2008, SQL Express 2005, Reporting Services, Win-XP, IIS5Basically let's say I have 2 pages:Page1: has a SQLDataSource control that populates a GridView from a table from a database file myDB.mdf (no code behind)Page2: has a reportviewer control that show a report with data from the same table from myDB.mdf from the reportserver, (no code behind)I have attached myDB.mdf to the SQL Server Express using the SQL Server Management Studio Express.If I first open Page2 to display the ReportViewer it works ok. or using the Report ManagerNow this is the problem:If after that I try to open Page1 then a get an error message:Cannot open user default database. Login failed.Login failed for user 'myServerASPNET'. Exception Details: System.Data.SqlClient.SqlException: Cannot open user default database. Login failed.Login failed for user 'myServerASPNET'.Then I have to restart the SQL Server to fix it,Now I can open Page1 ok, but if after this I try to open Page2 (ReportViewer) againThen I get this error:" An error has occurred during report processing. o Cannot create a connection to data source 'my_Datasource'. &And this error if open the report using the report manager:" An error has occurred during report processing. o Cannot create a connection to data source 'my_Datasource'. ยง Unable to open the physical file "C:InetpubwwwrootWebsiteApp_DatamyDB.mdf". Operating system error 32: "32(The process cannot access the file because it is being used by another process.)". &Now if i check the Management Studio Express again, you can see that myDB.mdf was detached. It seems to be there by it has no Tables or definitions, so I have to attach it again..Do you know how to fix this?Thanks in advance,Ed
Hi, I want to schedule a daily job using sql server to update the info. in a sql server table. This is very new to me. Could you please forward me some helpful resources. Thanks,
QuestionsI need to batch a set of update commands. Can that be done and if so what are the possible ramfications? Can one mix / match Deletes/Inserts and Updates into a SQL command via the semi-colon in a batch set? (Is this the appropriate forum?)
WHYI am unable to use the dynamic sql building found in the dataset due to a multiple table contstraints. I have built classes that will extract the differences from two datasets and report on the updates/deletes and inserts required. Since I have multiple SQL statements, it would be nice to combine them into one statement.
Platform.Net 2C#IIS6SQL Server 2000 is the eventual target database for the generated SQL
Hey guys, I periodically have to update maybe 300 records of the same column.. However, I've been udpating each record one by one. Is there a way I can do something the following.ID Name1 john2 chris3 adam4 ben5 steveupdate table1 set name = name where id = ? but have it run through an entire set of these? Is there any way of automating that rather than having to update it manually? Do i need another table with just the id numbers and the column I want to change? or do i need a txt file?
