so only about a third of the rows make it in. I am fairly certain that the file does not end after row 214698811. My certainty is based on the file size - other files with similar size and exactly the same schema managed to import fully and they have over 600m rows.
My question is, anyone have any ideas how I might be able to diagnose the problem with this file? Maybe a super-fantastic text editor I could view a 39gb text file with, and jump straight to row 214698811 to see if there is any weirdness there?
I my requirement I need to read all the files from folder (one by one) and insert data from those files into the database table . I am facing one issue here . If suppose while executing if any of the file fails its not executing the other files. Package stops execution.
I cannot use Redirect rows option beacuse as per requirment if file has some Data problem , I am suppose to ignore the file instead of Data Rows.
Is there is any property in for each file task .....kindly suggest
I am having trouble with a dtsx package to truncate a table, then insert the contents of a .csv file. The package is being executed off the local filesystem, reading a csv on the same file system, and inserting into a remote SQL 2k5 server. If I run the package alone in BI it will run perfectly, if I implement the package into a console app in visual studio, it will trunc the table, but will not insert any of the data in the csv file. When running from DtExec I recieve the following error on the CSV portion after the table is truncated:
Code: 0xC00470FE Soure: Data Flow Task DTS.Pipeline Description: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for for componenet "Soure - My_File_CSV" (1).
I have tried all the work arounds I can find without any luck. All help will be appreciated.
Hello, I have a package that copies data FROM an MS Access database table to a SQL Server 2005 table. 'Run64BitRunTime' has been set to 'False'. The package has been saved to SQL Server. I have a Job that runs the package using an operating system command. The following is the command syntax:
€œC:Program Files (x86)Microsoft SQL Server90DTSBinndtexec.exe€? /SQL "RebatesRebates_TotalSecurity" /SERVER bwdbfin1 /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING E
I created the package on a machine other than bwdbfin1. I can run the package from Visual Studio. I can run the package from Integration Services. I have sysAdmin rights on bwdbfin1. I've tried running the job using two different proxy accounts and the sql agent account. I have the location of the Access database. No matter what I do, the Job fails with the following error:
The process could not be created for step 1 of job 0xD947EF76ACD96340B12279FEDDC580CE (reason: The system cannot find the file specified). The step failed.
I have an identical package that copies data TO an Access database. The database addressed in that package and this package are in the same location. The 'CreatorName' of both packages is the same. I have logging enabled for every category, but nothing is written to the sysdtslog90 table when the Job runs. I set up error output in the DataFlow task, and have also tried to 'ignore' errors. I have searched the forum, done a web search, and I can't find a reason for the failure.
Is dtexec the file that is not found? If that were the case, then why can a Job run my other package?
The system creates a XML file but when I run the package I get the following error in the output pane. Information: 0x40016041 at FMC_People: The package is attempting to configure from the XML file "L:ProjectsVinciSSISDVLFMC loader ImportFMC Loader ImportFMC Loader ImportJACBE_IF_CONFIG.xml". SSIS package "FMC_People.dtsx" starting. Information: 0x4004300A at Dataprocessing_PEOPLE, DTS.Pipeline: Validation phase is beginning. Error: 0xC0202009 at FMC_People, Connection manager "JACBE_IF": An OLE DB error has occurred. Error code: 0x80040E21. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.". Error: 0xC020801C at Dataprocessing_PEOPLE, FMC_ARE_PRESENT_destination 1 [22338]: The AcquireConnection method call to the connection manager "JACBE_IF" failed with error code 0xC0202009. Error: 0xC0047017 at Dataprocessing_PEOPLE, DTS.Pipeline: component "FMC_ARE_PRESENT_destination 1" (22338) failed validation and returned error code 0xC020801C. Error: 0xC004700C at Dataprocessing_PEOPLE, DTS.Pipeline: One or more component failed validation. Error: 0xC0024107 at Dataprocessing_PEOPLE: There were errors during task validation. SSIS package "FMC_People.dtsx" finished: Failure.
I don't get it. Where do I go wrong?
I tried the same with a DtsConfig file instead of an XML but to no avail. the way of working as described in BOL and in the book professional SQL SERVER 2005 Integration service seems to me perfectly similar.
OK. Here's my situation. I check for the existence of a dummy .txt file using a script. I send an e-mail if it does not exist and exit package. The .txt file only exists if another .xls file is present which I import. However, during the validation phase of the package, the package fails because the .xls file does not exist. Is there a way to bypass the validation step? The only solution I came up with is to have a two-step job. The first runs the file check step and sends the e-mail. The second attemps to run the package and fails. Not a very graceful exit.
select * from openrowset(bulk '\server1c$file.txt', SINGLE_BLOB) as t works from sql server itself, but doesn't work from any other machine. I got "Operating system error code 5(Access is denied.)." I am running as the domain admin, the file.txt has full control for everyone. In server1 even log, I see Anonymous Logon.
Hello, For packages where an MS Access database is the destination, what are some ways to detect whether or not the file is 'in use'? I know there is a lock file associated with Access databases. Could it be as simple as using something from the FileSystem Object to discover whether or not there is a lock file with the same name as the destination database? I'd like to stop the package if the file is in use.
Running NT 4.0, sp6a. and sql 2k. I have a DTS job that works just fine if i go to 'design view' and then 'execute' it. But if I schedule it, the following error appears.. My question is... why? Also I modified the path from the current below (denapp02cmc$cd01.txt to the local path of the server as well... still came up with the same problem. ?? TIA! ::
DTSRun: Loading... DTSRun: Executing... DTSRun OnStart: Copy Data from Results to denapp02cmc$cd01.txt Step DTSRun OnError: Copy Data from Results to denapp02cmc$cd01.txt Step, Error = -2147467259 (80004005) Error string: Error opening datafile: Access is denied. Error source: Microsoft Data Transformation Services Flat File Rowset Provider Help file: DTSFFile.hlp Help context: 0 Error Detail Records: Error: 5 (5); Provider Error: 5 (5) Error string: Error opening datafile: Access is denied.
Flat file is the source for to load the data into a table. I am using "Derived Column Component" for the data validation.
"Derived Column Component" Fails then i am writing/redirecting the records into the Flat File using "Flat File Destination" component.
It works fine except the following the issue.
Issue: The derived columun value (that cause an error) is not get inserted into the Flat File
Scenario: the data comes as "000000" and tring to convert to date format (DT_DATE)("20" + RIGHT(Check_Date,2) + "/" + SUBSTRING(Check_Date,1,LEN(Check_Date) - 4) + "/" + SUBSTRING(Check_Date,LEN(Check_Date) - 3,2))
The above expression is working fine, except the data 000000 not passed into the Flat File Destination.
I'm attempting to connect to a database file through visual studio 2013 Ultimate. The .mdf file is located on my local drive inside the App_Data folder of the project. However when I try to connect to the file it fails and throws an error message (see below). Â
“The attempt to attach to the database failed with the following information: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 50 - Local Database Runtime error occurred. The specified LocalDB instance does not exist.â€
When uploading a Mirosoft 2007 file (*.docx) I get the following error,Message: String or binary data would be truncated.Line Number: 1Source: .Net SqlClient Data ProviderProcedure: Message: The statement has been terminated.Line Number: 1Source: .Net SqlClient Data ProviderProcedure: Using FileUpload MS SQLServer, VB.NET
I have a flat file. It's fixed-with with CRLF record delimiters (a.k.a. Ragged Right format).
Some fields are null, and represented by the text NULL.
I'm trying to import the file into SQL via an OLE DB connection. The target table is a SQL 2000 data table. Two of the fields in the target database are of type smallint.
When I run PREVIEW on the data source (Flat File), everything looks good & correct. I added the convert columns task to convert my strings to smallint. This is where things go haywire.
After linking everything up, the conversion gives me a "Cannot convert because of a possible loss of data." All of my numbers are < 50, so I know this isn't the case. Another SSIS bogus error
My first instinct is the SSIS doesn't understand that NULL means null. I edited the file and replaced all instances of NULL with 4 emtpy string chars. Still no good. It seems to be having a hard time parsing the file now.
I dropped the convert task and tried editing the data source, and set the two smallint fields to smallint instead of string (SSIS formats). I get the same conversion error.
Changing the NULL values to 0 fixed the problem, but they're not 0. They're null.
Short of creating another script that converts all zeros to NULL using the aforementioned hack, I'm out of ideas.
I'm I missing something or is SSIS just incapable of handling nulls in fixed-width flat file formats?
I have two versions of "rsk.txt" one with 1.9mill rows and one with the first 2000 rows only. The files have one column only with 115 characters that I'll split in to several columns later using SUBSTRING. The one with 2000 rows fires in to the database with no problems whatsoever using this exact code, the other one throws the following error:
Server: Msg 4866, Level 17, State 66, Line 1 Bulk Insert fails. Column is too long in the data file for row 1, column 1. Make sure the field terminator and row terminator are specified correctly.
How can I resolve this problem?
EDIT: I tried several different row- and fieldterminators but this exact one works for the small data-file so I assume it should also work for the large one...the large one is however copyed directly using binary ftp from a unix-filesystem and the small one is manually copied into a new txt-file using UltraEdit.
I have a flat file which is loaded into the database on a daily basis. The file contains rows of strings which I load into a table, specifically to a column of length 8000.
The string has a length of 690, but the format is like 'xxxxxx xx xx..' and so on, where 'xxxx' represents data. So there are spaces, etc present in the middle.
Previously I used SQL 2000 DTS to load the files in, and it was just a Column Transformation with the Col001 from the text file loading straight to my table column. After the load, if I select len(col) it gives me 750 for all rows.
Once I started to migrate this to SSIS, I allocated the Control Flow Task and specified the flat file source and the oledb destination, and gave the output column a type of String and output column width of 8000. But when I run the data flow task it copies only 181 or 231 characters out of the 750 required. I feel it stops where it finds the SPACES and skips the rest.
I specified row delimiters or CR, and LF. I checked the file under UltraEdit and there were no special characters in the file that would cause the problem.
Any suggestions how I can get it to load the full data?
I am using SQL Server Data Tools for Visual Studio 2012. I have a very simple SSIS package with a Data Flow task that exports from an OLE DB Source to a tab-delimited unicode Flat File Destination and a Bulk Insert task that loads from the file. Both the Flat File Destination and Bulk Import are using the same code page. The Bulk Insert task is using the wide char format to read from the file. The process works fine with nvarchar and int columns, but when I add a unique identifier column it fails with "type mismatch or invalid character for the specified code page".
I did a small package with only one ODBC connection (Merant 3.70 32-Bit Progess). This package runs well in Visual Studio and fails when runs by SQL Server Agent.
Configuration:
SQL Server Agent on a 32Bit server.
The ODBC connection configuration in available on System DSN on this server.
The user of Server Agent have full access (Admin).
Connect Manager Provider: ".Net ProvidersOdbc Data Provider"
SQL Server version: 9.0.3042
Error Message:
Executed as user: TEKCON cadmin. ...ion 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 16:50:33 Error: 2007-06-11 16:50:33.62 Code: 0xC0047062 Source: Data Flow Task DataReader Source [1] Description: System.Data.Odbc.OdbcException: ERROR [HYC00] [MERANT][ODBC PROGRESS driver]Optional feature not implemented. ERROR [HY000] [MERANT][ODBC PROGRESS driver]msgOpen: unable to open message file: PROMSGS ERROR [IM006] [MERANT][ODBC PROGRESS driver]Driver's SQLSetConnectAttr failed. ERROR [HYC00] [MERANT][ODBC PROGRESS driver]Optional feature not implemented. ERROR [HY000] [MERANT][ODBC PROGRESS driver]msgOpen: unable to open message file: PROMSGS ERROR [IM006] [MERANT][ODBC PROGRESS driver]Driver's SQLSetConnectAttr failed. at System.Data.Odbc.OdbcConnection.HandleError(OdbcHandle hrHandle, RetCode retcode) at System.Data.Odbc.OdbcConnectionHandle..ctor(OdbcConnection connection, OdbcCon... The package execution fa... The step failed.
I created a .bat file with this instruction and It's run well:
We are trying to install the Standard Edition of SQL Server 2005. We already have SQL Express installed. Standard won't install and Express won't uninstall.
We have tried every suggestion we can find and some we made up. When we try to install Standard, we get to the bit where you choose what you want to install and the only thing available is workstation components.
There are so many cases of this on the Internat that I can't believe MS have not solved the issue. And I am stunned that they want to charge us more money to talk to us about how to fix something we just paid them an arm and a leg for!
What do I need to tell you to get some idea of where to go next with this?
Currently have a single hard coded file path to the SSRS config file which parses the file and provides the reporting services web service url. Â My question is how would i run this same query against 100s of servers that may or may not share the same file path as the one hard coded ?
Is there a way to query the registry to find the location of the config file of any server ? which could be on D, E, F, H, etc.Â
I know I can string together the address followed by "reports" and named instance if needed, but some instances may not have used the default virtual directory name (Reports).
Am I going about this the hard way ? Is there a location where the web service url exists in a table ? I could not locate anything in the Reporting service database. Basically need to inventory all of my reporting services url's.
I have a customer they are running raid 5 on a windows 2000 server one of the drives went bad. The customer replaced the drive and raid rebuilt the drive, every thing seamed to be fine but there is one database file that cannot be attached to SQL. The file is 15G so I know there is information the error states that the file is not a Primary file. Any clue on how to fix this?
Greetings, I have just arrived back into the country (NZ) and back into ASP.NET. I am having trouble with the following:An attempt to attach an auto-named database for file (file location).../Database.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share. It has only begun since i decided i wanted to use IIS, I realise VWD comes with its own localhost, but since it is only temporary, i wanted a permanent shortcut on my desktop to link to my intranet page. Anyone have any ideas why i am getting the above error? have searched many places on the internet and not getting any closer. Cheers ~ J
Hi, I have suddenly run into a problem. I have a DTS which was running well till few days ago. Now when ever it runs, it crashes the server, any body have any idea why???
I have created a Web assistant job which select and displays data from a table (very small amt of data) on to the webpage. the job is schedule to run every 1 minute. the job is not running, in job view history its gives the error msg "could not open the output file" 16821 Error no.
I've been running into a small problem. There are two people that usually create local packages to be executed by the DTS. Either my boss or I. The problem that I have been running into is, there are some local packages that will not execute when I try to run them. These packages are that my boss has created. When she runs them they work fine. But when I run them they just don't run. The only way I can run the local package is if I log in into the server and run it from there.
The error that I keep getting is:
Unspecified Error [Microsoft][ODBC Driver Manager] Data Source Name not found and no default driver specified.
What would I be able to do so that I can execute this local package from my computer?
I'm trying to run a job that will convert a load of data but it keeps failing at the first step. If I run the scripts in each step on their own then they run fine. The error message I get is 'The process did not produce any output. Process exit code 1. The step failed'. I think this may be some kind of security problem but I cannot see where. The command I'm using for the first step is as follows:
Hi, I am trying to create a job to run a ssis package. The job fails. Looking at the history log, there is no proper information on why the job failed. It just says: The job failed. The job was invoked by user ...
please note that the ssis package runs fine on it's own i.e. in the designer by pressing the run button. Thanks
I have a package which works fine when i ru if from VS but when i schedule it iam getting an error on one of the data reader source. I am not able to figure it why its giving error when its working fine from VStudio
Message Executed as user: NAdbasvc-alticor. ... 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:28:25 AM Error: 2007-07-10 11:28:26.21 Code: 0xC020838F Source: Staging LKPDataReader Source [1] Description: An error occurred executing the provided SQL command. End Error Error: 2007-07-10 11:28:26.21 Code: 0xC004706B Source: Staging DTS.Pipeline Description: "component "LKPDataReader Source" (1)" failed validation and returned validation status "VS_ISBROKEN". End Error Error: 2007-07-10 11:28:26.21 Code: 0xC004700C Source: Staging DTS.Pipeline Description: One or more component failed validation. End Error Error: 2007-07-10 11:28:26.21 Code: 0xC0024107 Source: Staging Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 11:28:25 AM Finished: 11:28:26 AM Elapsed: 0.906 seconds. The package execution fai... The step failed.
Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection
Line 57: Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load Line 58: Dim ds As New DataSet Line 59: SqlDataAdapter1.Fill(ds) Line 60: Line 61: DataGrid1.DataSource = ds
Stack Trace:
[SqlException: Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.] System.Data.SqlClient.ConnectionPool.GetConnection(Boolean& isInTransaction) System.Data.SqlClient.SqlConnectionPoolManager.GetPooledConnection(SqlConnectionString options, Boolean& isInTransaction) System.Data.SqlClient.SqlConnection.Open() System.Data.Common.DbDataAdapter.QuietOpen(IDbConnection connection, ConnectionState& originalState) System.Data.Common.DbDataAdapter.FillFromCommand(Object data, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) System.Data.Common.DbDataAdapter.Fill(DataSet dataSet) jtio8.WebForm1.Page_Load(Object sender, EventArgs e) in c:inetpubwwwrootjtio8WebForm1.aspx.vb:59 System.Web.UI.Control.OnLoad(EventArgs e) System.Web.UI.Control.LoadRecursive() System.Web.UI.Page.ProcessRequestMain()
Now, I've created a new login to the SQL server using the ASPNET user id (as well as several others for testing), set up the premissions for each UID and I'm still getting this error.
I have also tried to setup the user info in the connection string by doing the following:
Hello,I'm trying to create a new SQL Express database in VWD, and I get the error: Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed.What is this error all about? I don't understand it.Thanks.
I have this line of db connection code that works in vb.net but not in c#: con = new ADODB.ConnectionClass(); //for vb.net I used ADODB.Connection() instead and it workscon.Open("Provider=SQLOLEDB;" + ConfigurationSettings.AppSettings["connectionString"]); Error message:CS1501: No overload for method 'Open' takes '1' arguments Searched the web but can't find the answer... Does anyone have a clue?
