i have a SQL backend and some of the data in my tables is more or less configuration data and some times i only want to pull one row of data which i can do just fine with a SQL query but whats the best method to pull it.
assume i have a query like this.
Select A, B, C from Table1 where ID=xyz
whats the easiest way to get A, B and C in to string variables?
I know i can use the sqldatasource control but i just feel there is too much overhead there.
Hi, I want to get an image from a sql server database and display it with an asp:image control. I use C# in MS Visual Studio .Net 2005 and Sql server 2005. All I've done is:
I got a problem using an OLE-DB Source in my data flow task. It is an Informix-Server using the newest OLE DB-Driver provided by IBM. However, when I set up the OLE DB-Source with connection manager and SQl-Query, I get the following warning message:
Warning at {2B334CA3-A792-4BC2-93AA-12FADCF1E696} [OLE DB Source [45]]: Cannot retrieve the column code page info from the OLE DB provider. If the component supports the "DefaultCodePage" property, the code page from that property will be used. Change the value of the property if the current string code page values are incorrect. If the component does not support the property, the code page from the component's locale ID will be used.
Later when I try to execute the package, the destination adapter gets errors like
Error 3 Validation error. Data Flow Task: OLE DB Destination [2985]: Columns "antrag" and "Antrag" cannot convert between unicode and non-unicode string data types. Informix_OLEDB.dtsx 0 0
I guess that SQL Server cannot get the data types from the Source.
In my application on click of Delete button, actually I am not deleting the record. I am just updating the flag. But before updating the record I just want to know the dependency of the record ie. if the record I am deleting(internally updating) exists any where in the dependent tables, it should warn the user with message that it is available in the child table, so it can not be deleted. I want to check the dependency dynamically. For that I have written the following procedure. But it is updating in both cases.
CREATE proc SProc_DeleteRecord @TableName varchar(50), @DeleteCondition nVarchar(200) As Begin Begin Transaction Declare @DelString nvarchar(4000) set @DelString = 'Delete from ' + @TableName + ' where ' + @DeleteCondition execute sp_executeSql @DelString RollBack Transaction --because i donot want to delete the record in any case If @@Error <> 0 Begin select '1' End Else Begin Declare @SQLString nvarchar(4000) set @SQLString = 'Update ' + @TableName + ' set DeletedFlag=1 where ' + @DeleteCondition execute sp_executeSql @SQLString select '0' End
Howdy folks! (I feel im creating too many topics...but all my questions are unrelated :-/)
Dev environment: SSCE, Native c++ OLE code, Win CE 5
I have a routine that calculates the size of a set of columns in order to create a byte buffer for retrieving data from an IRowset and inserting it into a custom class. This method works great for all data types except ntext. When I look at the column information from an ntext field, the DBCOLUMNINFO::ulColumnSize member holds 536,870,911 (the max length of an ntext type). Obviously I dont want to allocate 1GB of memory for each ntext column. Is there anyway (natively) to determine the actual number of characters in a field?
Hi GuysOff late, I've grown with programming that requires more than a number of tables that has foreign keys with other tables' primary keys. It takes a really cumbersome coding to retrieve the code from another table with the other table having foreign keys. My question is, how do we program VS 2005 such that it does all the retrieval of the data from the database instead of us writing the code all by ourself?Is it really good database technique to bend the normalcy rules and have one to two columns having redundant data?Can anyone tell me how to write code that retrieves the foreign key data when the data from the other table is called?Thanks
In Code Behind, What is proper select statement syntax to retrieve the @BName field from a table?Using Visual Studio 2003SQL Server DB I created the following parameter:Dim strName As String Dim parameterBName As SqlParameter = New SqlParameter("@BName", SqlDbType.VarChar, 50) parameterBName.Value = strName myCommand.Parameters.Add(parameterBName) I tried the following but get error:Dim strSql As String = "select @BName from Borrower where BName= DOROTHY V FOWLER " error is:Line 1: Incorrect syntax near 'V'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Line 1: Incorrect syntax near 'V'. Source Error: Line 59: Line 60: Line 61: myCommand.ExecuteNonQuery() 'Execute the query
I have spent days searching the web and forums for an answer to this simple question and cannot find an example.
I have built a service broker application on sql server 2005. The application puts some xml on an incoming queue which is basically a few parameters to be used in a query. This queue will then call a stored proc which does some business logic and puts the resulting results in another queue also in xml.
I have written a test harness in SQL to put messages on the inbound queue and then some sql to retrieve the returned code from the outbound queue.
What I want to do is be able to convert the SQL which does this into .net code to be used by an application. i.e. write in .net some code to put xml on a queue and then write some .net code to retrieve xml from another queue.
I wouldn't have thought this would be a difficult thing to do and would have been done hundreds of times, but unable to find anything to simply send and retrieve XML to service broker queues....
thanks for your help.. its really needed. I found some links, but they are really vague and often doing select statments in service broker or something like this. I don't want to call any sql, just send and recieve XML on the queues.
any example code that does this, would be really helpfull
Hi all--I'm trying to convert a function which I inherited from a SQL Server 2000 DTS package to something usable in an SSIS package in SQL Server 2005. Given the original code here: Function Main() on error resume next dim cn, i, rs, sSQL Set cn = CreateObject("ADODB.Connection") cn.Open "Provider=sqloledb;Server=<server_name>;Database=<db_name>;User ID=<sysadmin_user>;Password=<password>" set rs = CreateObject("ADODB.Recordset") set rs = DTSGlobalVariables("SQLstring").value
for i = 1 to rs.RecordCount sSQL = rs.Fields(0).value cn.Execute sSQL, , 128 'adExecuteNoRecords option for faster execution rs.MoveNext Next
Main = DTSTaskExecResult_Success
End Function
This code was originally programmed in the SQL Server ActiveX Task type in a DTS package designed to take an open-ended number of SQL statements generated by another task as input, then execute each SQL statement sequentially. Upon this code's success, move on to the next step. (Of course, there was no additional documentation with this code. :-)
Based on other postings, I attempted to push this code into a Visual Studio BI 2005 Script Task with the following change:
public Sub Main()
...
Dts.TaskResult = Dts.Results.Success
End Class
I get the following error when I attempt to compile this:
Error 30209: Option Strict On requires all variable declarations to have an 'As' clause.
I am new to Visual Basic, so I'm on a learning curve here. From what I know of this script: - The variables here violate the new Option Strict On requirement in VS 2005 to declare what type of object your variable is supposed to use.
- I need to explicitly declare each object, unless I turn off the Option Strict On (which didn't seem recommended, based on what I read).
Given this statement:
dim cn, i, rs, sSQL
I'm looking at "i" as type Integer; rs and sSQL are open-ended arrays, but can't quite figure out how to read the code here:
This code seems to create an instance of a COM component, then pass provider information and create the recordset being passed in by the previous task, but am not sure whether this syntax is correct for VS 2005 or what data type declaration to make here. Any ideas/help on how to rewrite this code would be greatly appreciated!
Table 1: AddressBook Fields --> User Name, Address, CountryCode
Table 2: Country Fields --> Country Code, Country Name
Step 1 : I have created a Cube with these two tables using SSAS.
Step 2 : I have created a report in SSRS showing Address list.
The Column in the report are User Name, Address, Country Name
But I have no idea, how to convert this Country Code to Country name.
I am generating the report using the Layout tab. ( Data | Layout | Preview ) Report1.rdl [Design]
Anyone help me to solve this issue. Because, in our project most of the transaction tables have Code and Code description in master table. I need to convert all code into corresponding description in all my reports.
Hello, I'm using ASP.Net to update a table which include a lot of fields may be around 30 fields, I used stored procedure to update these fields. Unfortunatily I had to use a FormView to handle some TextBoxes and RadioButtonLists which are about 30 web controls. I 've built and tested my stored procedure, and it worked successfully thru the SQL Builder.The problem I faced that I have to define the variable in the stored procedure and define it again the code behind againALTER PROCEDURE dbo.UpdateItems ( @eName nvarchar, @ePRN nvarchar, @cID nvarchar, @eCC nvarchar,@sDate nvarchar,@eLOC nvarchar, @eTEL nvarchar, @ePhone nvarchar, @eMobile nvarchar, @q1 bit, @inMDDmn nvarchar, @inMDDyr nvarchar, @inMDDRetIns nvarchar, @outMDDmn nvarchar, @outMDDyr nvarchar, @outMDDRetIns nvarchar, @insNo nvarchar,@q2 bit, @qper2 nvarchar, @qplc2 nvarchar, @q3 bit, @qper3 nvarchar, @qplc3 nvarchar, @q4 bit, @qper4 nvarchar, @pic1 nvarchar, @pic2 nvarchar, @pic3 nvarchar, @esigdt nvarchar, @CCHName nvarchar, @CCHTitle nvarchar, @CCHsigdt nvarchar, @username nvarchar, @levent nvarchar, @eventdate nvarchar, @eventtime nvarchar ) AS UPDATE iTrnsSET eName = @eName, cID = @cID, eCC = @eCC, sDate = @sDate, eLOC = @eLOC, eTel = @eTEL, ePhone = @ePhone, eMobile = @eMobile, q1 = @q1, inMDDmn = @inMDDmn, inMDDyr = @inMDDyr, inMDDRetIns = @inMDDRetIns, outMDDmn = @outMDDmn, outMDDyr = @outMDDyr, outMDDRetIns = @outMDDRetIns, insNo = @insNo, q2 = @q2, qper2 = @qper2, qplc2 = @qplc2, q3 = @q3, qper3 = @qper3, qplc3 = @qplc3, q4 = @q4, qper4 = @qper4, pic1 = @pic1, pic2 = @pic2, pic3 = @pic3, esigdt = @esigdt, CCHName = @CCHName, CCHTitle = @CCHTitle, CCHsigdt = @CCHsigdt, username = @username, levent = @levent, eventdate = @eventdate, eventtime = @eventtime WHERE (ePRN = @ePRN) and the code behind which i have to write will be something like thiscmd.CommandType = CommandType.StoredProcedure; cmd.Parameters.AddWithValue("@eName", ((TextBox)FormView1.FindControl("TextBox1")).Text);cmd.Parameters.AddWithValue("@ePRN", ((TextBox)FormView1.FindControl("TextBox2")).Text); cmd.Parameters.AddWithValue("@cID", ((TextBox)FormView1.FindControl("TextBox3")).Text);cmd.Parameters.AddWithValue("@eCC", ((TextBox)FormView1.FindControl("TextBox4")).Text); ((TextBox)FormView1.FindControl("TextBox7")).Text = ((TextBox)FormView1.FindControl("TextBox7")).Text + ((TextBox)FormView1.FindControl("TextBox6")).Text + ((TextBox)FormView1.FindControl("TextBox5")).Text;cmd.Parameters.AddWithValue("@sDate", ((TextBox)FormView1.FindControl("TextBox7")).Text); cmd.Parameters.AddWithValue("@eLOC", ((TextBox)FormView1.FindControl("TextBox8")).Text);cmd.Parameters.AddWithValue("@eTel", ((TextBox)FormView1.FindControl("TextBox9")).Text); cmd.Parameters.AddWithValue("@ePhone", ((TextBox)FormView1.FindControl("TextBox10")).Text); cmd.Parameters.AddWithValue("@eMobile", ((TextBox)FormView1.FindControl("TextBox11")).Text); So is there any way to do it better than this way ?? Thank you
Hi,I need some help here. I have a SELECT sql statement that will query the table. How do I get the return value from the sql statement to be assigned to a label. Any article talk about this? Thanks geniuses.
My service broker is working with 2 different instances in local server.But could not able to get working on 2 different servers because of Conversation ID cannot be associated with an active conversation error which I have posted.
After I receive the message successfully...in the end I get this message sent...
Recently in an SSIS package I am getting the following error for a particular Data flow task.
Error: 2008-01-25 12:01:48.58
Code: 0xC0202009
Source: Import Datasynapse Data User Events Source [3017]
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF.
End Error
Error: 2008-01-25 12:01:48.73
Code: 0xC004701A
Source: Import Datasynapse Data DTS.Pipeline
Description: component "User Events Source" (3017) failed the pre-execute phase and returned error code 0xC0202009.
End Error
Our guess is when the data size of User Events table is more it throws this error. If we try to transfer small subset of data it succeeds. What could be reason for this error?
Since this is very urgent, immediate response would be very much appreciated.
I am using an SQLDataSource to add a product, this works fine, but I would like to know what syntax is used to retrieve the product ID in this case which is return by the SPROC
I need to retrieve points column from my database for the specific user that is signed on and sum all of them. How can I do it using the Gridview and also code in vb for a label? Thanks.
I am trying to populate some controls on a web page with values retrieved from a sql server database recordset. The text type controls work fine. However I have a Check Box on my form. I get a runtime error when I try to write into it. So tried wrting the value into a text control and was suprised to see the value retrieved was "S00817". Heres the relevant line of code
Message.Innerhtml=MyDataset.tables(0).Rows(0)(12)
I would expect this to come up with a 1 or a 0. I get S00817 if the database record holds a 1 or a 0. So what is going on here?
Is it possible to retrieve a particular row from a result set? For eg if my query returns 5 rows and i want to just retrieve the 3rd row from the result....is it possible? If yes...can someone tell me the syntax for it....would appreciate the gr8 help...
Here is my sql procedure: ALTER PROCEDURE dbo.SoftWareShow /* ( @parameter1 int = 5, @parameter2 datatype OUTPUT ) */ @SoftID uniqueidentifierAS SELECT [SoftID], [SoftName], [SoftJoinDate], [SoftSize], [SoftMode], [SoftRoof], [SoftHome], [SoftDemo], [SoftFirstClassID], [SoftSecondClassID], [SoftDesc], [SoftReadCount], [SoftDownCount],ltrim(rtrim([SoftUrlOne])) SoftUrlOne, ltrim(rtrim([SoftUrlTwo])) SoftUrlTwo, ltrim(rtrim([SoftUrlThree])) SoftUrlThree, ltrim(rtrim([SoftUrlFour])) SoftUrlFour FROM [SoftWare] WHERE ([SoftID] = @SoftID) RETURNwhere I retrieve data using sqldatasource, an error appear. how can do ?
I want to do something similar to ExecuteScalar in ADO.net but instead in T-SQL.Basically I want to do a query that will return the first value in the table queried and put it into a variable. How do I do this?Thanks in advance.
I have a question, one user made mistake that she delete one record from a database. How can i retrieve this only one record. I just know how to restore the database.
Can any one please tell me how to retrieve values from timestamp column. I am getting 1900-01-01 00:02:09.457. It is not storing current timestamp when record is created or modified.
