I have a table with 10 rows with a varbinary column
I wish to concatenate all the binary column into a single binary column and then write that to another table within the database. This application splits a binary file (Word or PDF document) into multiple segments (this is Column2 as below)
I'm using a bit-wise comparison to effectively store multiple values in one column. However once the number of values increases it starts to become too big for a int data type.you also cannot perform a bitwise & on two binary datatypes. Is there a better way to store the binary data rather than int or binary?
Hello,I am trying to serialize (binary) a class and save it in a database. I followed a few examples I found in internet and this is what I came up with: 1 ' Rows 2 <Serializable()> _ 3 Public Class Rows 4 Implements ISerializable 5 6 Private _Rows As New Generic.List(Of Row) 7 Public Property Rows() As Generic.List(Of Row) 8 Get 9 Return _Rows 10 End Get 11 Set(ByVal value As Generic.List(Of Row)) 12 _Rows = value 13 End Set 14 End Property ' Rows 15 16 ' New 17 Public Sub New() 18 End Sub ' New 19 20 ' New 21 Public Sub New(ByVal siRows As SerializationInfo, ByVal scRows As StreamingContext) 22 End Sub ' New 23 24 ' GetObjectData 25 Public Sub GetObjectData(ByVal siRows As SerializationInfo, ByVal scRows As StreamingContext) Implements ISerializable.GetObjectData 26 27 siRows.AddValue("Rows", Me.Rows) 28 29 End Sub ' GetObjectData 30 31 Public Sub Serialize(ByVal filename As String) 32 33 Dim sRows As Stream = Stream.Null 34 Try 35 sRows = File.Open(filename, FileMode.Create, FileAccess.ReadWrite) 36 Dim bfRows As New BinaryFormatter 37 bfRows.Serialize(sRows, Me) 38 Finally 39 sRows.Close() 40 End Try 41 42 End Sub ' Serialize 43 44 Public Shared Function Deserialize(ByVal filename As String) As Rows 45 46 Dim sRows As Stream = Stream.Null 47 Try 48 sRows = File.Open(filename, FileMode.Open, FileAccess.Read) 49 Dim bfRows As New BinaryFormatter 50 Return CType(bfRows.Deserialize(sRows), Rows) 51 Finally 52 sRows.Close() 53 End Try 54 55 End Function ' Deserialize 56 57 End Class ' Rows After serializing the class I need to save it in an a SQL 2005 database.But all the examples I followed use the filename ... Anyway, do I need to do something to save this into an SQL 2005 database or can I use it as follows? And how can I use this?This is the first time I do something like this so I am a little bit confused.Thanks,Miguel
Hy friends!I'm new in WebApplications that have SQL SERVER DB.My problem is that...In the DataBase I have a table with varbinary column and in the program I want save in this column a value of binary[] variable! How I can make it?Another question.... If I want select (by a query in the application) the value of the binary column, where I store it? because if I want select an integer value I take this in a int variable, and if I want select an string value from a DataBase I take this in a string variable..but How I can make it with binary column?Thanks in advance!!
Hello, I have a table which uses binary data to store passwords. How do I view the contents of the "binary data" column, ie. the passwords? It just shows it as <binary data>?
I have a binary column with length 20 in SQL server table. I store dynamically C# byte[] value range from 0 to 19. So for example, If I store length of 16 and when I try to retrive it back into byte [] in C# it returns whole length 20. When I see in debug it has value from 0 to 15 which I want to use but from 16 to 19 is zero. How can I get just length value which I stored.
I use DataRow to get whole row and from the row object I extract byte [] based on column name.
I have a field in my database defined as a bit. I need to bind this field to a checkbox I have stored in a datgrid on my webform. I'm having problmes finding the right call in the html
We have a dll that sends a hexadecimal data (const. length) to MS SQL Server database. It's declared as String in VB, the db column data type is binary.
Here is the SQL String that has been executed successfully in Query Analyzer:
When I am trying to do the same thing in the insert stored procedure, I get an error message: "Disallowed implicit conversion from data type varchar to data type binary, table 'MyDB.dbo.MyTABLE', column 'MyCOLUMN'. Use the convert function to run this query."
How does one go about getting a graphic image into SQL Server 6.5. For example, let`s say I have a company logo that I want to include in a company profile table to be used on some reports. The graphic is now a .BMP or .GIF or .JPG file.
Can anyone provide me with the syntax for comparing rows of two tables using binary checksum? The tables A and B have 8 & 9 columns respectively. The PK in both cases is Col1 & Col2. I want checksum on Columns 1 to 8.
Hi there, Am working on an archiving system that stores files/images in a column of type Binary. we want to change the front end of this archiving system it was done using asp.net we dont have access to the source code what is the way to retrieve the files from the binary columns? how they store or retrieve the files? Thanx best site for sql,,,
Quick question here. I am working with a database which uses Binary(8) as an id(ie, contact_id is binary(8), and connects 2 tables). I can already extract the binary data (in the form 00-00-00-00-00-00-ab-cd). I know that there exists a contact_id 0x0000000000001989 (hex) however, when I attempt this query...
"SELECT * FROM Support_Incident where Contact_Id = '0x0000000000001989'". I get no results. What have I done wrong?
I would like to drop the leading 0x on a binary value so I can do abitwise operation.Here is simplified code:select right(0x88186000,8)I expected to get back 88186000, this was not the case. The commandreturned some wierd characters.Am I missing something?
Is it true that binary and varbinary has a max-kapacity at 8000 bytes? Imjyst unsure how to read the dokumentation and want to be completely sure.And image is only one to use for data aobve that size?Thx in regards for clearing things out for meReagardsAnders
I want to store a binary string in SqlServer from VB .NET through astored procedure. I have been storing the binary data in a BitArraywhich I am not set on by any means. When I pass the BitArray into astored procedure, which is looking for a variable of type binary, itthrows the following: "Object must implement IConvertible." BitArrayobviously does not implement IConvertable.If anyone has a good way of passing binary data into a storedprocedure through a parameter array I'd appreciate it.
I have a 256 bit hash value to identify chunks of data. Would it be a good idea to create a 32-byte binary field as the primary key or encode the bytes to a string?
Need help reading a binary file see below for details...
I have uploaded a csv file into a sql table. Now i want to extract the data and insert the data in the csv file into another sql table. What commands can i use in sql to extract/ read the data ?
Hello Dears, I was Maked Pictures table in sql server 2005 with Two Col pic_Id (int) and picture(binary) i need now ro insert image into this table by Asp.net under VB.net Code i have in my form FileUpload and button control and this is my CodeProtected Sub btnLoad_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnLoad.Click Dim content() As Byte = ReadBitmap2ByteArray(FileUpload1.PostedFile.ContentType) StoreBlob2DataBase(content) End SubFunction ReadBitmap2ByteArray(ByVal FileName As String) As Byte() Dim image As Drawing.Bitmap = New Drawing.Bitmap(FileName)Dim stream As IO.MemoryStream = New IO.MemoryStream() image.Save(stream, System.Drawing.Imaging.ImageFormat.Bmp)Return stream.ToArray End Function Sub StoreBlob2DataBase(ByVal content As Byte()) con.Open()Dim cm As New SqlCommand("Insert into Pictures(Pic_Id,picture) values(@id,@pic)", con) cm.Parameters.AddWithValue("@ID", 1)Dim p1 As New SqlParameter p1.ParameterName = "@pic" p1.SqlDbType = Data.SqlDbType.Binary p1.Value = content p1.Size = content.Length cm.Parameters.Add(p1) cm.ExecuteNonQuery() End Sub
when i make run to my website it give me an Exeption in this statement Dim image As Drawing.Bitmap = New Drawing.Bitmap(FileName) it tell me that Parameter is not valid i need help about this please with my Best regard khalil
Here is my task I am storing pdf's in sql server. I would like to retrieve the binary data from sql server and write the pdf content into an existing aspx page to the appropriate pageview section. What is the best way to handle this. The code works below but it loads a new browser with the content. I need it to appear in it's tabbed section in the original aspx file. Any assistance you can give me would be greatly appreciated. Thanks Jerry oSQLConn.Open()Dim myreader As SqlDataReader myreader = myCommand.ExecuteReader Response.Expires = 0 Response.Buffer = True Response.Clear() Do While (myreader.Read()) Response.ContentType = ("application/pdf")Response.BinaryWrite(myreader.Item("img_content")) Loop
Hello, I have a table that stores binary files. When I serve them up to the user, I call the following page (serveDocument.aspx?DocumentID=xxx) which holds only the following code and pass the document ID: Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load Dim DocumentID As Integer = Convert.ToInt32(Request.QueryString("DocumentID")) 'Connect to the database and bring back the image contents & MIME type for the specified picture Using myConnection As New SqlConnection(ConfigurationManager.ConnectionStrings("kelly_lmConnectionString1").ConnectionString) Const SQL As String = "SELECT [Content_Type], [Document_Data] FROM [lm_Service_Detail_Documents] WHERE [Document_id] = @Document_id" Dim myCommand As New SqlCommand(SQL, myConnection) myCommand.Parameters.AddWithValue("@Document_id", DocumentID) myConnection.Open() Dim myReader As SqlDataReader = myCommand.ExecuteReader If myReader.Read Then Response.ContentType = myReader("Content_Type").ToString() Response.BinaryWrite(myReader("Document_Data")) End If
myReader.Close() myConnection.Close() End Using End Sub It works perfectly. But heres the thing: I want users to be able to right click on the link and chose 'Save Target As'. In IE 7, this works fine. In FireFox it saves the document as 'serveDocument.aspx'. Is there any way to inject the filename that I want to save the document as? Thank you.
I need help please. I have a image field in SQL called AttachData. I need to retrieve the information and save it on my computer. I tried the following but it fails on the line 7. How can I write the data from sql to my computer? Here is my table in sql: CREATE TABLE [dbo].[MailAttachment]( [MsgID] [int] NOT NULL, [AttachName] [nvarchar](255) COLLATE Hebrew_CI_AS NULL, [AttachType] [nvarchar](255) COLLATE Hebrew_CI_AS NULL, [AttachSize] [int] NOT NULL DEFAULT (0), [AttachCompSize] [int] NOT NULL DEFAULT (0),[AttachData] [image] NOT NULL ) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]1 Dim s As New _ 2 System.IO.FileStream("c:emails" _ 3 & "" & AttachName.ToString, System.IO.FileMode.CreateNew,System.IO.FileAccess.Write) 4 6 7 ' s.Write(CType(AttachData, Byte()), 0, CInt(AttachSize)) 8 10 11 s.Close()
Hello All, I am using a stored procedure. In that stored procedure I am passing the name of a table as an argument. and after executing that procedure, it gives me the 'Insert' query of each and every row. So if I have 10 records, then the procedure will give me 10 'Insert' queries with its table values. There is a image datatype in last column of my table. and i am not able to fetch that binary data of that table. Can anybody tell me what is the problem with my stored proce. given below :: ALTER PROCEDURE [dbo].[SP_Generate_Insert_Statements_Testing] @strTableName varchar(128), -- used to specify the table to generate data for @RequiredGo bit = 0 -- used to allow GO statements to separate the insert statements AS
--create a cursor that loops through the fields in the table --and retrieves the column names and determines the delimiter type that the field needs DECLARE CR_Table CURSOR FAST_FORWARD FOR
SELECT COLUMN_NAME, 'IsChar' = CASEWHEN DATA_TYPE in ('int', 'money', 'decimal', 'tinyint', 'smallint' ,'numeric', 'bit', 'bigint', 'smallmoney', 'float','timestamp') THEN 0 WHEN DATA_TYPE in ('char', 'varchar', 'nvarchar','uniqueidentifier', 'nchar') THEN 1WHEN DATA_TYPE in ('datetime', 'smalldatetime') THEN 2 WHEN DATA_TYPE in ('text', 'ntext') THEN 3WHEN DATA_TYPE in ('sql_variant') THEN 4 WHEN DATA_TYPE in ('image') THEN 5ELSE 6 END FROM INFORMATION_SCHEMA.COLUMNS c WITH (NOLOCK) INNER JOIN syscolumns sc WITH (NOLOCK) ON c.COLUMN_NAME = sc.name INNER JOIN sysobjects so WITH (NOLOCK)ON sc.id = so.id AND so.name = c.TABLE_NAMEWHERE table_name = @strTableName AND DATA_TYPE <> 'timestamp'AND sc.IsComputed = 0 ORDER BY ORDINAL_POSITIONFOR READ ONLYOPEN CR_Table
FETCH NEXT FROM CR_Table INTO @ColName, @IsChar
WHILE (@@fetch_status <> -1) BEGIN IF @@fetch_status <> -1 BEGINIF @SelList = 'SELECT' BEGIN SELECT @Fields = @Fields + '[' + @ColName + ']' + ', 'SELECT @SelList = CASE @IsChar WHEN 1 THEN @SelList + ' ISNULL('''''''' + REPLACE(['+ @ColName + '],'''''''', '''''''''''' ) + '''''''',''NULL'') ' + ' COLLATE database_default + ' WHEN 2 THEN @SelList + 'ISNULL('''''''' + CONVERT(VARCHAR(20),['+ @ColName + '])+ '''''''',''NULL'') ' + ' COLLATE database_default + ' WHEN 3 THEN @SelList + ' ISNULL('''''''' + REPLACE(CONVERT(VARCHAR(MAX),['+ @ColName + ']),'''''''', '''''''''''')+ '''''''' ,''NULL'') '+ ' COLLATE database_default + ' --WHEN 3 THEN @SelList + ''' CONVERT(VARCHAR(MAX),['+ @ColName + ']) ''' WHEN 4 THEN @SelList + ' ISNULL('''''''' + REPLACE(CONVERT(VARCHAR(8000),['+ @ColName + ']),'''''''', '''''''''''')+ '''''''' ,''NULL'') '+ ' COLLATE database_default + ' WHEN 5 THEN @SelList + '''MyImageData''''' ELSE @SelList + ' ISNULL(CONVERT(VARCHAR(2000),['+ @ColName + '],0),''NULL'')' + ' COLLATE database_default + ' END END ELSE BEGIN SELECT @Fields = @Fields + '[' + @ColName + ']' + ', 'SELECT @SelList = CASE @IsChar WHEN 1 THEN @SelList + ''',''' + ' + ' + ' ISNULL('''''''' + REPLACE(['+ @ColName + '],'''''''', '''''''''''' ) + '''''''',''NULL'') ' + ' COLLATE database_default + ' WHEN 2 THEN @SelList + ''',''' + ' + ' + 'ISNULL('''''''' + CONVERT(VARCHAR(20),['+ @ColName + '])+ '''''''',''NULL'') ' + ' COLLATE database_default + ' WHEN 3 THEN @SelList + ' ISNULL('''''''' + REPLACE(CONVERT(VARCHAR(MAX),['+ @ColName + ']),'''''''', '''''''''''')+ '''''''' ,''NULL'') '+ ' COLLATE database_default + ' --WHEN 3 THEN @SelList + ''' CONVERT(VARCHAR(MAX),['+ @ColName + ']) ''' WHEN 4 THEN @SelList + ''',''' + ' + ' + ' ISNULL('''''''' + REPLACE(CONVERT(VARCHAR(8000),['+ @ColName + ']),'''''''', '''''''''''')+ '''''''' ,''NULL'') '+ ' COLLATE database_default + ' WHEN 5 THEN @SelList + ''',''' + '''MyImageData''''' ELSE @SelList + ''',''' + ' + ' + ' ISNULL(CONVERT(VARCHAR(2000),['+@ColName + '],0),''NULL'')' + ' COLLATE database_default + ' END ENDIF @IsChar = 5 SET @strImageSQL = 'SELECT ' + @ColName + ' FROM ' + @strTableName END
FETCH NEXT FROM CR_Table INTO @ColName, @IsChar END
SET NOCOUNT ON --now we need to create and load the temp table that will hold the data --that we are going to generate into an insert statement
CREATE TABLE #TheData (TableData varchar(MAX)) INSERT INTO #TheData (TableData) EXEC (@SelList) IF @strImageSQL <> '' BEGIN CREATE TABLE #ImageData (TableData image) INSERT INTO #ImageData (TableData) EXEC (@strImageSQL) END --Cursor through the data to generate the INSERT statement / VALUESDECLARE CR_Data CURSOR FAST_FORWARD FOR SELECT TableData FROM #TheData FOR READ ONLY OPEN CR_Data FETCH NEXT FROM CR_Data INTO @tableDataIF @strImageSQL <> '' BEGIN DECLARE CR_ImageData CURSOR FAST_FORWARD FOR SELECT TableData FROM #ImageData FORREAD ONLY OPEN CR_ImageDataFETCH NEXT FROM CR_ImageData INTO @ImageData END
WHILE (@@fetch_status <> -1) BEGIN IF (@@fetch_status <> -2)BEGIN IF @strImageSQL <> '' BEGINPRINT @InsertStmt PRINT 'VALUES ' PRINT '(' PRINT SUBSTRING(@tableData,1,CHARINDEX('MyImageData',@tableData)-2)PRINT @ImageData PRINT SUBSTRING(@tableData,CHARINDEX('MyImageData',@tableData) + 12,LEN(@tableData)) PRINT ')' + CHAR(13) END ELSE PRINT @InsertStmt + ' VALUES (' + @tableData + ')' + CHAR(13)
IF @RequiredGo = 1 PRINT 'GO'
ENDFETCH NEXT FROM CR_Data INTO @tableData IF @ImageData <> '' FETCH NEXT FROM CR_ImageData INTO @ImageData
-- IF @TextData <> '' -- FETCH NEXT FROM CR_TextData INTO @TextData END CLOSE CR_Data DEALLOCATE CR_DataIF @ImageData <> '' BEGINCLOSE CR_ImageData DEALLOCATE CR_ImageDataEND
IF @bitIdentity = 1 BEGIN PRINT 'SET IDENTITY_INSERT [' + @strTableName + '] OFF ' END
PRINT '---- ** End of Inserts ** ----' RETURN (0)
=========== End of Procedure ======================= Any help will be appreciated.
i am trying to retrieve an image blob stored in SQL to a web matrix form (using VB.NET). I am totaly new to this and i got the code below from a site but it doesn't see to work..... <%@ Page Language="VB" %> <%@ import Namespace="System.Data" %> <%@ import Namespace="System.IO" %> <%@ import Namespace="System.Drawing.Image" %> <%@ import Namespace="System.Drawing.Bitmap" %> <%@ import Namespace="System.Drawing.Graphics" %> <%@ import Namespace="System.Web.UI.WebControls" %> <%@ import Namespace="System.Data.Odbc" %> <%@ import Namespace="System.Data.SqlClient" %> <script runat="server"> Private Function GetImageFromDB(ByVal ImageID As Integer) As System.Drawing.Image
' Get the Connection string Dim strConnection As String strConnection = "server='(local)'; trusted_connection=true; database='mydatabasename'"
Dim conn As New SqlConnection(strConnection) Dim sqlCommand As String Dim strImage As String Dim image As System.Drawing.Image
Try sqlCommand = "SELECT ImageField FROM ImageTable WHERE MyImageId = " + ImageID.ToString
Dim cmd As New SqlCommand(sqlCommand) cmd.Connection = conn conn.Open() Dim dr As SqlDataReader dr = cmd.ExecuteReader() While (dr.Read())
Dim byt As Byte() byt = dr.Item(strImage) Dim bmp As New System.Drawing.Bitmap(New System.IO.MemoryStream(byt)) image = bmp
End While Catch ex As Exception ' Log Error Response.Write(ex.Message) Finally If conn.State = ConnectionState.Open Then conn.Close() End If End Try
Return image
End Function
Private Sub Page_Load (ByVal sender As System.Object, ByVal e As System.EventArgs) If Not IsPostBack Then GetImageFromDB(2111) End If End Sub </script> <html> <head> </head> <body> <form enctype="multipart/form-data" runat="server"> <asp:Image id="BrandSignImg" runat="server"></asp:Image> </form></body></html>
I am trying to store a byte array in a database. I want to use binary to store the data but I am confused about the type. The byte array I am trying to store is a password hash from SHA512. I hash a plain text value then store the result in a byte array. I then want to store the byte array in the database as binary but I am confused when its asking for the size of the binary field. In nvarchar a size of 2 would mean 2 characters. How should I choose the size of this binary field, and what does the size mean. If I choose a size of 6 does that mean 6 characters, like 010110. Or is it stored differently? The maximum size of a plain text password is 30 characters, and the salt used to generate the SHA512 hash has a maximum size of 16, but I don't know the exact size of the salt because its randomly picked when the salt is generated. I need to make sure the size of my binary field will hold the largest possible password hash, but I don't want it too large so its never completely used. How is this data stored in the binary field, and what size binary field should I choose to make sure there are no problems with the password hash being truncated, yet making sure I'm not just wasting by creating a field thats too large. Thanks!
Hi have done the following but get the errors at the end, any ideas Created a stored procedureALTER PROCEDURE ulfile@upload varchar(200)ASINSERT INTO results(@upload)VALUES (@Upload)RETURN after sitting for two hours I realised I had a comma after (200) then the following in the .cs file using System;using System.Data;using System.Configuration;using System.Collections;using System.Web;using System.Web.Security;using System.Web.UI;using System.Web.UI.WebControls;using System.Web.UI.WebControls.WebParts;using System.Web.UI.HtmlControls;public partial class Default3 : System.Web.UI.Page{//PostedFile Property of Type HTTPPostedFileint intDocLen = txtFileContents.PostedFile.ContentLength;byte[] Docbuffer = new byte[intDoclen];protected void Page_Load(object sender, EventArgs e){ Stream objStream;//InputStream://Gets a Stream object which points to an uploaded Document; //to prepare for reading the contents of the file.objStream = txtFileContents.PostedFile.InputStream;objStream.Read(Docbuffer, 0, intDocLen);//results is the connection objectcmdUploadDoc = new SqlCommand("ulfile", results);cmdUploadDoc.CommandType = CommandType.StoredProcedure;//Add the Params which in the Stored Proc cmdUploadDoc.Parameters.Add("@upload ", SqlDbType.VarChar, 200);//Set Params ValuescmdUploadDoc.Parameters[0].Value = txtTitle.Text;//Set the "@Doc" Param to be Docbuffer byet ArraycmdUploadDoc.Parameters[1].Value = Docbuffer;cmdUploadDoc.Parameters[2].Value = strDocType; }private void btnSubmit_Click(object sender, System.EventArgs e){string strDocExt;//strDocType to store Document type which will be Stored in the Databasestring strDocType;//Will be used to determine Document lengthint intDocLen;//Stream object used for reading the contents of the Uploading DocumnetStream objStream;SqlConnection results;SqlCommand cmdUploadDoc;if(IsValid){if(txtFileContents.PostedFile != null){//Determine File TypestrDocExt = CString.Right(txtFileContents.PostedFile.FileName,4).ToLower();switch(strDocExt){case ".doc":strDocType = "doc";break;case ".ppt":strDocType = "ppt";break;case ".htm":strDocType = "htm";break;case ".html":strDocType = "htm";break;case ".jpg":strDocType = "jpg";break;case ".gif":strDocType = "gif";break;case ".im":strDocType = "im";break;default:strDocType = "txt";break;}//Grab the Content of the Uploaded DocumentintDocLen = txtFileContents.PostedFile.ContentLength;//buffer to hold Document Contentsbyte[] Docbuffer = new byte[intDocLen];//InputStream://Gets a Stream object which points to an uploaded Document; //to prepare for reading the contents of the file.objStream = txtFileContents.PostedFile.InputStream;//Store the Content of the Documnet in a buffer//This buffer will be stored in the DatabaseobjStream.Read(Docbuffer ,0,intDocLen);//Add Uploaded Documnet to Database as Binary//You have to change the connection stringBooksConn = new SqlConnection("Server=66.179.84.110;UID=******;PWD=******;Database=******");//Setting the SqlCommandcmdUploadDoc = new SqlCommand("ulfile",results);cmdUploadDoc.CommandType = CommandType.StoredProcedure;cmdUploadDoc.Parameters.Add("@upload ",SqlDbType.VarChar,200);cmdUploadDoc.Parameters[0].Value = txtTitle.Text;cmdUploadDoc.Parameters[1].Value = Docbuffer ;cmdUploadDoc.Parameters[2].Value = strDocType;Results.Open();cmdUploadDoc.ExecuteNonQuery();Results.Close();}//End of if(txtFileContents.PostedFile != null)}//End Of if(IsValid)}//End of Method btnSubmit_Click} And the form code <%@ Page Language="C#" AutoEventWireup="true" CodeFile="Default3.aspx.cs" Inherits="Default3" %><!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"><html xmlns="http://www.w3.org/1999/xhtml" ><head id="Head1" runat="server"><title>Untitled Page</title></head><body><form id="frmUpload" method="post" enctype="multipart/form-data" runat="server"><span>Title</span><asp:textbox id="txtTitle" runat="server" EnableViewState="False"></asp:textbox><asp:requiredfieldvalidator id="valrTitle" runat="server" ErrorMessage="* Required" ControlToValidate="txtTitle">* Required</asp:requiredfieldvalidator><span>Document to Upload</span><input id="txtFileContents" type="file" runat="server" name="txtFileContents"></></><asp:button id="btnSubmit" Text="Submit" Runat="server" OnClick="btnSubmit_Click"></asp:button> </form></body></html> however when I try and view in browser I get the following Line 21: Line 22: Line 23: Stream objStream; Line 24: //InputStream: Line 25: //Gets a Stream object which points to an uploaded Document; I have trawlled the net, MSDN and anywhere else I can find to see what it is and nothing. eventually changed Stream.objstream to System.IO.Stream objStream; And now getting the following error Line 29: Line 30: //results is the connection object Line 31: cmdUploadDoc = new SqlCommand("ulfile",results); Line 32: cmdUploadDoc.CommandType = CommandType.StoredProcedure; Line 33: //Add the Params which in the Stored Proc Can anyone help?
In MSDB, all job_ID are uniqueidentifier data type, sometimes Job_ID is binary datatype. I need to print 'job_ID: ' + cast(@job_ID as varchar(100)). It prints nothing...
How could I convert and print the contents of Job_ID?
Is there any way to store a binary or image file into a database record / save a binary or image record back into a file using Transact SQL? If yes, would the "image" data type be most suitable?
(As a background, I am working on a process that deals with incomign emails, and I am using SQL Mail for that purpose. The above is needed to deal with attachments that may come with emails, and which are saved in a physical file on the HDD).
