Binary Code Could Not Be Created
Nov 21, 2007
I am getting an error message while creating a script component saying that
binary code could not be created.
I cant find the source of this erro. And yes, the PreCompile property is set to true.
View 3 Replies
ADVERTISEMENT
Mar 9, 2006
First of all let me say that ASP.NET a new programming environment for me so please forgive my ignorance.
Can someone please tell me how to write data to a SQL table that is a Binary data type? I have a stored procedure on the SQL server that I am calling to insert data into a table. I build a parameter list and set the values. It worked just fine before I added a binary field to the SQL table. My problem is that I don't know how to set the Binay data type to pass it to the stored procedure. Here is part of the code:
GetCMD = Myconnection.CreateCommand
GetCMD.CommandType = CommandType.StoredProcedure
GetCMD.CommandText = "SCHEMANAME.InsertLineItem"
GetCMD.Parameters.Add("HEADER_ID", SqlDbType.VarChar, 150)
GetCMD.Parameters("HEADER_ID").Value = "some value"
GetCMD.Parameters.Add("@OPTIONS", SqlDbType.Binary)
GetCMD.Parameters("@OPTIONS").Value = HOW DO I SET THIS VALUE????
rowsaffected = GetCMD.ExecuteNonQuery()
I assume serialization but have not figured out how. Anyone's help is greatly appreciated!!
View 1 Replies
View Related
Jul 19, 2007
Dear all:
I have set the PrecompileScriptIntoBinaryCode property to true,but the Script Component show the message "can't find the binary code" after I finish the script language and save it . What's wrong with it ? I ever tried the same code, and it's OK with no problem. When did the problem happen ?
Please give me a help ....Thanks a lot!
View 6 Replies
View Related
Oct 29, 2015
I am trying to backup and restore a 20GB SQL database from a SQL Server 2012 to another SQL Server 2014, but I have come across the following issues:
1) The developers [against best practice] have stored multiple images in fields within the database as binary code.
This therefore exceeds the 65532 character limit in some fields, so even though the images do show [based upon the data saved within this field], I cannot find the data in the field beyond this 65532 limit, within SQL Server.
How can I export / locate this data after the 65532 character limit?
2) When I have attempted to restore the database I am getting this error message:
Restore of database 'zapkam' failed. (Microsoft.SqlServer.Management.RelationalEngineTa sks)
Additional information:
System.Data.SqlClient.SqlError: RESTORE detected an error on page (1:1592996) in database "zapkam" as read from the backup set. (Microsoft.SqlServer.SmoExtended)
I have managed to restore two other smaller databases using the same technique, but am wondering if it's an issue with the database itself.
3) I have uploaded this database to the new server using FileZilla FTP Client, but it has cut out, painfully at 80% + 90% on a couple of occasions.
Is there a better solution for uploading these big files that I could possibly use? For example, uploading table by table or similar...
View 3 Replies
View Related
Jul 6, 2015
exporting an SSIS from a 2008 R2 SQL Server and re-import it into a SQL 2012.
I have inherited an SQL 2008 R2 Server running two SSIS packages. I have both as .dtsx files and & a manifest to install.The task at hand is now to migrate those to a new SQL 2012 server.[There is also an IIS running on that machine and project-specific .dll and stuff within the IIS document root. I do not know if these .dlls relate to the IIS web page or to the SQL .dtsx) But the migrated web site runs fine].
Installation of the packages into the MSDB works out flawlessly and one of the scripts runs fine, but the other fails to run with the error:
"Error: the binary code for the script is not found. Please open the script in the designer by clicking Edit Script button and make sure it builds successfully."
Google tell me something about a "Pre-compile option"-setting on server as explained here. I can not find this option setting anywhere in SSMS. Also as the migration is from 2008 R2 -> 2012 this should not be relevant as in both versions pre-compilation should be automatic, right?
- I installed visual studio 2013 community
- I installed SSDTBI
- Start the "Integration Services Import Project Wizard"
to import the SSIS directly from the "Integration Services Catalog"
However, things don't quite work very well - Trying to import (from the locally installed SQL instance) it will not display the tree of SSIS stuff, but only the root directory.
So importing directly from the running system won't work. Let's see if we can get somewhere with the .dtsx As I _do_ actually have the .dtsx files here, why not open them up directly in Visual studio and try to get compiled whatever needs to be compiled.I create a new "integration Services" Project and open up the .dtsx into this project. ==> LOTS of errors of all kind.
(The job of this script is to fetch messages from an Exchange.)But opening up this specific bit of code doesn't work a bit - there is no binary code in it and how to reate it or where to get it from...
View 4 Replies
View Related
Apr 21, 2015
After adding Service Reference to WebService, the Script Component has Binary Code not found, red circle not showing these are the steps I followed:
1) Add Script Component as Source
2) Add 3 x Output Columns Col1,2 and 3
3) Add HTTP Connection URL>..Binary Code not found, red circle showing
4) Add test code to Sub CreateNewOutputRows Dim i As Integer = 6 Binary Code not found, red circle not showing
5) Add Service Reference URL...Binary Code not found, red circle showing again
Should just adding Service Reference cause Binary Code not found, red circle to appear. I have to set precompilescripttobinary option , however cannot see this option in 2012
View 3 Replies
View Related
Feb 23, 2006
I built a packaage in SSIS with the import/export utility. It created a Package.dtsx and Package1.dtsx. Both of these files seem to be XML files. I want to understand how these files work. For example, in the package I built I had about 80 tables exporting and importing data. Some of them I want to allow the identiy insert and delete the rows first. Others I want to append the data. How can I find the code or settings that does this? Or where can I find the options on the gui interface to change these settings. When I search the code I can't even find a some of the tables that are being transferred.
View 20 Replies
View Related
Aug 24, 2006
I have a script task that I've created that just displays a MsgBox as listed in Professional SQL Server 2005 Integration Services in chapter 4. The problem is that when I exit the VSA design tool there is a red "X" on the task that says in a popup:
"The task is configured to pre-compile the script, but binary code is not found. Please visit the IDE..."
I go back into the script design, and the code is there, and the PreCompile propterty IS set to True. Attempting to EXECUTE the task only results in a similar error, just more verbose without actually giving any additional insight.
I've read the thread on where the VSA code is deleted on closing.. but my code is still there.. it just isn't seeing the binary code (if it actually exists).
Ideas, comments or snide remarks anyone?
- Mark
View 10 Replies
View Related
May 22, 2014
Server is SQL 2000
I have a table with 10 rows with a varbinary column
I wish to concatenate all the binary column into a single binary column and then write that to another table within the database. This application splits a binary file (Word or PDF document) into multiple segments (this is Column2 as below)
example as follows
TableA
Column1 Column2 Column3
aaa 001 <some binary value>
aaa 002 <some binary value>
aaa 003 <some binary value>
aaa 004 <some binary value>
aaa 005 <some binary value>
desired results in TableB
Column1 Column2
aaa <concatenated value of above binary columns>
View 9 Replies
View Related
May 7, 2015
I'm using a bit-wise comparison to effectively store multiple values in one column. However once the number of values increases it starts to become too big for a int data type.you also cannot perform a bitwise & on two binary datatypes. Is there a better way to store the binary data rather than int or binary?
View 9 Replies
View Related
Jun 29, 2015
trying to get a new database created then running a script to created the tables, relationships, indexes and insert default data. All this I'm making happen during the installation of my Windows application. I'm installing SQL 2012 Express as a prerequisite of my application and then opening a connection to that installed SQL Server using Windows Authentication.
E.g.: Data Source=ComputerNameSQLEXPRESS;Initial Catalog=master;Integrated Security=SSPI; Then I run a query from my code to create the database eg: "CREATE DATABASE [MyDatabaseName]".
From this point I run a script using a Batch file containing "SQLCMD....... Myscriptname.sql". In my script I have my tables being created using "Use [MyDatabaseName] Go CREATE TABLE [dbo].[MyTableName] .....". So question is, should I have [dbo]. as part of my Create Table T-SQL commands? Can I remove "[dbo]."? Who would be the owner of the database? If I can remove the [dbo]., should I also remove dbo. from any query string from within my code?
View 3 Replies
View Related
Jul 27, 2006
Hi all--I'm trying to convert a function which I inherited from a SQL Server 2000 DTS package to something usable in an SSIS package in SQL Server 2005. Given the original code here:
Function Main()
on error resume next
dim cn, i, rs, sSQL
Set cn = CreateObject("ADODB.Connection")
cn.Open "Provider=sqloledb;Server=<server_name>;Database=<db_name>;User ID=<sysadmin_user>;Password=<password>"
set rs = CreateObject("ADODB.Recordset")
set rs = DTSGlobalVariables("SQLstring").value
for i = 1 to rs.RecordCount
sSQL = rs.Fields(0).value
cn.Execute sSQL, , 128 'adExecuteNoRecords option for faster execution
rs.MoveNext
Next
Main = DTSTaskExecResult_Success
End Function
This code was originally programmed in the SQL Server ActiveX Task type in a DTS package designed to take an open-ended number of SQL statements generated by another task as input, then execute each SQL statement sequentially. Upon this code's success, move on to the next step. (Of course, there was no additional documentation with this code. :-)
Based on other postings, I attempted to push this code into a Visual Studio BI 2005 Script Task with the following change:
public Sub Main()
...
Dts.TaskResult = Dts.Results.Success
End Class
I get the following error when I attempt to compile this:
Error 30209: Option Strict On requires all variable declarations to have an 'As' clause.
I am new to Visual Basic, so I'm on a learning curve here. From what I know of this script:
- The variables here violate the new Option Strict On requirement in VS 2005 to declare what type of object your variable is supposed to use.
- I need to explicitly declare each object, unless I turn off the Option Strict On (which didn't seem recommended, based on what I read).
Given this statement:
dim cn, i, rs, sSQL
I'm looking at "i" as type Integer; rs and sSQL are open-ended arrays, but can't quite figure out how to read the code here:
Set cn = CreateObject("ADODB.Connection")
cn.Open "Provider=sqloledb;Server=<server_name>;Database=<db_name>;User ID=<sysadmin_user>;Password=<password>"
set rs = CreateObject("ADODB.Recordset")
This code seems to create an instance of a COM component, then pass provider information and create the recordset being passed in by the previous task, but am not sure whether this syntax is correct for VS 2005 or what data type declaration to make here. Any ideas/help on how to rewrite this code would be greatly appreciated!
View 7 Replies
View Related
Mar 28, 2007
Dear Friends,
I am having 2 Tables.
Table 1: AddressBook
Fields --> User Name, Address, CountryCode
Table 2: Country
Fields --> Country Code, Country Name
Step 1 : I have created a Cube with these two tables using SSAS.
Step 2 : I have created a report in SSRS showing Address list.
The Column in the report are User Name, Address, Country Name
But I have no idea, how to convert this Country Code to Country name.
I am generating the report using the Layout tab. ( Data | Layout | Preview ) Report1.rdl [Design]
Anyone help me to solve this issue. Because, in our project most of the transaction tables have Code and Code description in master table. I need to convert all code into corresponding description in all my reports.
Thanks in advance.
Regards
Ramakrishnan
Singapore
28 March 2007
View 4 Replies
View Related
Dec 28, 1999
Hi folks.
Here i have small problem in transactions.I don't know how it is happaning.
Up to my knowldge if you start a transaction in side the transaction if you have DML statements
Those statements only will be effected by rollback or commit but in MS SQL SERVER 7.0 and 6.5
It is rolling back all the commands including DDL witch it shouldn't please let me know on that
If any one can help this please tell me ...........Please............
For Example
begin transaction t1
create table t1
drop table t2
then execute bellow statements
select * from t1
this query gives you table with out data
select * from t2
you will recieve an error that there is no object
but if you rollback
T1 willn't be there in the database
droped table t2 will come back please explain how it can happand.....................
Email Address:
myself@ramkistuff.8m.com
View 1 Replies
View Related
Feb 24, 2008
Hello,
I'm using ASP.Net to update a table which include a lot of fields may be around 30 fields, I used stored procedure to update these fields. Unfortunatily I had to use a FormView to handle some TextBoxes and RadioButtonLists which are about 30 web controls.
I 've built and tested my stored procedure, and it worked successfully thru the SQL Builder.The problem I faced that I have to define the variable in the stored procedure and define it again the code behind againALTER PROCEDURE dbo.UpdateItems
(
@eName nvarchar, @ePRN nvarchar, @cID nvarchar, @eCC nvarchar,@sDate nvarchar,@eLOC nvarchar, @eTEL nvarchar, @ePhone nvarchar,
@eMobile nvarchar, @q1 bit, @inMDDmn nvarchar, @inMDDyr nvarchar, @inMDDRetIns nvarchar,
@outMDDmn nvarchar, @outMDDyr nvarchar, @outMDDRetIns nvarchar, @insNo nvarchar,@q2 bit, @qper2 nvarchar, @qplc2 nvarchar, @q3 bit, @qper3 nvarchar, @qplc3 nvarchar,
@q4 bit, @qper4 nvarchar, @pic1 nvarchar, @pic2 nvarchar, @pic3 nvarchar, @esigdt nvarchar, @CCHName nvarchar, @CCHTitle nvarchar, @CCHsigdt nvarchar, @username nvarchar,
@levent nvarchar, @eventdate nvarchar, @eventtime nvarchar
)
AS
UPDATE iTrnsSET eName = @eName, cID = @cID, eCC = @eCC, sDate = @sDate, eLOC = @eLOC, eTel = @eTEL, ePhone = @ePhone, eMobile = @eMobile,
q1 = @q1, inMDDmn = @inMDDmn, inMDDyr = @inMDDyr, inMDDRetIns = @inMDDRetIns, outMDDmn = @outMDDmn,
outMDDyr = @outMDDyr, outMDDRetIns = @outMDDRetIns, insNo = @insNo, q2 = @q2, qper2 = @qper2, qplc2 = @qplc2, q3 = @q3, qper3 = @qper3,
qplc3 = @qplc3, q4 = @q4, qper4 = @qper4, pic1 = @pic1, pic2 = @pic2, pic3 = @pic3, esigdt = @esigdt, CCHName = @CCHName,
CCHTitle = @CCHTitle, CCHsigdt = @CCHsigdt, username = @username, levent = @levent, eventdate = @eventdate, eventtime = @eventtime
WHERE (ePRN = @ePRN)
and the code behind which i have to write will be something like thiscmd.CommandType = CommandType.StoredProcedure;
cmd.Parameters.AddWithValue("@eName", ((TextBox)FormView1.FindControl("TextBox1")).Text);cmd.Parameters.AddWithValue("@ePRN", ((TextBox)FormView1.FindControl("TextBox2")).Text);
cmd.Parameters.AddWithValue("@cID", ((TextBox)FormView1.FindControl("TextBox3")).Text);cmd.Parameters.AddWithValue("@eCC", ((TextBox)FormView1.FindControl("TextBox4")).Text);
((TextBox)FormView1.FindControl("TextBox7")).Text = ((TextBox)FormView1.FindControl("TextBox7")).Text + ((TextBox)FormView1.FindControl("TextBox6")).Text + ((TextBox)FormView1.FindControl("TextBox5")).Text;cmd.Parameters.AddWithValue("@sDate", ((TextBox)FormView1.FindControl("TextBox7")).Text);
cmd.Parameters.AddWithValue("@eLOC", ((TextBox)FormView1.FindControl("TextBox8")).Text);cmd.Parameters.AddWithValue("@eTel", ((TextBox)FormView1.FindControl("TextBox9")).Text);
cmd.Parameters.AddWithValue("@ePhone", ((TextBox)FormView1.FindControl("TextBox10")).Text);
cmd.Parameters.AddWithValue("@eMobile", ((TextBox)FormView1.FindControl("TextBox11")).Text);
So is there any way to do it better than this way ??
Thank you
View 2 Replies
View Related
Oct 16, 2007
Hi all,
Could someone tell me if custom code function can capture the event caused by a user? For example, onclick event on the rendered report?
Also, can custom code function alter the parameters of the report, or refresh the report?
Thanks.
View 2 Replies
View Related
Jan 25, 2007
Hi,I need some help here. I have a SELECT sql statement that will query the table. How do I get the return value from the sql statement to be assigned to a label. Any article talk about this? Thanks geniuses.
View 2 Replies
View Related
Dec 31, 2007
i am using asp.net 2.0 with c#.
i have database - mssql server.
in that i have tuser table in that table i have password feild which datatype is Binary.
when i am entered password in asp.net application that time runtime error is convert the string to binary.
my code is---string myByte = Stingtest;
System.Text.ASCIIEncoding encoding = new System.Text.ASCIIEncoding();Byte[] bytes = encoding.GetBytes(myByte);myByte = "";
myByte = encoding.GetString(bytes);
objClsDllSql.sqlCon = objReadIniFile.funReadIniSql();
objClsDllSql.sqlCon.Open();objVarIni.sqlDA = new SqlDataAdapter("select * from tUser ", objClsDllSql.sqlCon);
objVarIni.sqlDA.Fill(objVarIni.sqlDS, "tUser");
objVarIni.sqlDT = objVarIni.sqlDS.Tables["tUser"];
strSqlCmdText = "insert into tUser values( " + Convert.ToInt32(txtUserCode.Text) + " , "+
" " + " ' " + txtUserID.Text + " ' " + ", "+" " + " ' " +txtFirstName.Text + " ' " + ", "+
" " + " '" + txtLastName.Text + "'" + ", "+" " + myByte + ", "+
" " + "'" + txtUserType.Text + "'" + ", "+ " " + "'" + dtpWarningDate.SelectedDate + "'" + " , "+
" " + "'" + dtpExpireDate.SelectedDate + "'" + ", "+" " + "'" + drpdwnStatus.SelectedItem.Text + "'" + ", "+
" " + "'" + Session["LoginName"].ToString() + "'" + ", "+" " + "'" + dtpCreateDate.SelectedDate.ToString() + "'" + ", "+
" " + "'" + txtUpDatedBy.Text + "'" + ", "+
" " + "'" + dtpUpdateDate.SelectedDate.ToString() + "'" + ")";
pls help me .
its really urgent.
gayatri
View 1 Replies
View Related
Mar 9, 2007
Hello,I am trying to serialize (binary) a class and save it in a database. I followed a few examples I found in internet and this is what I came up with: 1 ' Rows
2 <Serializable()> _
3 Public Class Rows
4 Implements ISerializable
5
6 Private _Rows As New Generic.List(Of Row)
7 Public Property Rows() As Generic.List(Of Row)
8 Get
9 Return _Rows
10 End Get
11 Set(ByVal value As Generic.List(Of Row))
12 _Rows = value
13 End Set
14 End Property ' Rows
15
16 ' New
17 Public Sub New()
18 End Sub ' New
19
20 ' New
21 Public Sub New(ByVal siRows As SerializationInfo, ByVal scRows As StreamingContext)
22 End Sub ' New
23
24 ' GetObjectData
25 Public Sub GetObjectData(ByVal siRows As SerializationInfo, ByVal scRows As StreamingContext) Implements ISerializable.GetObjectData
26
27 siRows.AddValue("Rows", Me.Rows)
28
29 End Sub ' GetObjectData
30
31 Public Sub Serialize(ByVal filename As String)
32
33 Dim sRows As Stream = Stream.Null
34 Try
35 sRows = File.Open(filename, FileMode.Create, FileAccess.ReadWrite)
36 Dim bfRows As New BinaryFormatter
37 bfRows.Serialize(sRows, Me)
38 Finally
39 sRows.Close()
40 End Try
41
42 End Sub ' Serialize
43
44 Public Shared Function Deserialize(ByVal filename As String) As Rows
45
46 Dim sRows As Stream = Stream.Null
47 Try
48 sRows = File.Open(filename, FileMode.Open, FileAccess.Read)
49 Dim bfRows As New BinaryFormatter
50 Return CType(bfRows.Deserialize(sRows), Rows)
51 Finally
52 sRows.Close()
53 End Try
54
55 End Function ' Deserialize
56
57 End Class ' Rows
After serializing the class I need to save it in an a SQL 2005 database.But all the examples I followed use the filename ... Anyway, do I need to do something to save this into an SQL 2005 database or can I use it as follows? And how can I use this?This is the first time I do something like this so I am a little bit confused.Thanks,Miguel
View 1 Replies
View Related
Aug 1, 2007
Hy friends!I'm new in WebApplications that have SQL SERVER DB.My problem is that...In the DataBase I have a table with varbinary column and in the program I want save in this column a value of binary[] variable! How I can make it?Another question.... If I want select (by a query in the application) the value of the binary column, where I store it? because if I want select an integer value I take this in a int variable, and if I want select an string value from a DataBase I take this in a string variable..but How I can make it with binary column?Thanks in advance!!
View 1 Replies
View Related
Dec 28, 2007
Hello,
I have a table which uses binary data to store passwords. How do I view the contents of the "binary data" column, ie. the passwords? It just shows it as <binary data>?
View 5 Replies
View Related
Apr 6, 2004
I have a binary column with length 20 in SQL server table. I store dynamically C# byte[] value range from 0 to 19. So for example, If I store length of 16 and when I try to retrive it back into byte [] in C# it returns whole length 20. When I see in debug it has value from 0 to 15 which I want to use but from 16 to 19 is zero. How can I get just length value which I stored.
I use DataRow to get whole row and from the row object I extract byte [] based on column name.
Thank you in advance....
View 1 Replies
View Related
Aug 5, 2004
Can someone firecct me to instructions on how to download a Binary file in a asp.net application.
I have a sql 2000 db that has a field that contains files and my users need access to them via my web app.
View 2 Replies
View Related
Nov 15, 2004
I have a field in my database defined as a bit. I need to bind this field to a checkbox I have stored in a datgrid on my webform. I'm having problmes finding the right call in the html
<asp:CheckBox id="chkComplexity" runat="server" Width="125px" Text="Complexity">
WHAT TO PUT HERE !?!?!
</asp:CheckBox>
Any help would be greatly appreciated
View 3 Replies
View Related
Jan 12, 2002
Can I use "timestamp" datatype in SQL Server as the equivalent datatype for "binary" in ACCESS 2000?
View 1 Replies
View Related
Feb 8, 2001
We have a dll that sends a hexadecimal data (const. length) to MS SQL Server database. It's declared as String in VB, the db column data type is binary.
Here is the SQL String that has been executed successfully in Query Analyzer:
"declare @MyHAX varchar(32)
select @MyHAX='0x3236374535454337363145313430463742394545 413443473230343544320000'
insert MyTABLE (MyCOLUMN)
values (convert (binary(32),@MyHAX))"
When I am trying to do the same thing in the insert stored procedure, I get an error message: "Disallowed implicit conversion from data type varchar to data type binary, table 'MyDB.dbo.MyTABLE', column 'MyCOLUMN'. Use the convert function to run this query."
Does anyone know how can I insert my binary data?
View 5 Replies
View Related
Oct 21, 1998
How does one go about getting a graphic image into SQL Server 6.5. For example, let`s say I have a company logo that I want to include in a company profile table to be used on some reports. The graphic is now a .BMP or .GIF or .JPG file.
I just do not have a clue how this works.
Bob
View 3 Replies
View Related
Feb 6, 2004
Hi,
Can anyone provide me with the syntax for comparing rows of two tables using binary checksum? The tables A and B have 8 & 9 columns respectively. The PK in both cases is Col1 & Col2. I want checksum on Columns 1 to 8.
Thanks
View 6 Replies
View Related
Apr 1, 2008
Hi there,
Am working on an archiving system that stores files/images in a column of type Binary. we want to change the front end of this archiving system it was done using asp.net we dont have access to the source code
what is the way to retrieve the files from the binary columns?
how they store or retrieve the files?
Thanx best site for sql,,,
View 1 Replies
View Related
Jun 14, 2006
Quick question here. I am working with a database which uses Binary(8) as an id(ie, contact_id is binary(8), and connects 2 tables). I can already extract the binary data (in the form 00-00-00-00-00-00-ab-cd). I know that there exists a contact_id 0x0000000000001989 (hex) however, when I attempt this query...
"SELECT * FROM Support_Incident where Contact_Id = '0x0000000000001989'". I get no results. What have I done wrong?
View 4 Replies
View Related
May 1, 2007
I would like to drop the leading 0x on a binary value so I can do abitwise operation.Here is simplified code:select right(0x88186000,8)I expected to get back 88186000, this was not the case. The commandreturned some wierd characters.Am I missing something?
View 3 Replies
View Related
Jul 20, 2005
Is it true that binary and varbinary has a max-kapacity at 8000 bytes? Imjyst unsure how to read the dokumentation and want to be completely sure.And image is only one to use for data aobve that size?Thx in regards for clearing things out for meReagardsAnders
View 1 Replies
View Related
Jul 20, 2005
I want to store a binary string in SqlServer from VB .NET through astored procedure. I have been storing the binary data in a BitArraywhich I am not set on by any means. When I pass the BitArray into astored procedure, which is looking for a variable of type binary, itthrows the following: "Object must implement IConvertible." BitArrayobviously does not implement IConvertable.If anyone has a good way of passing binary data into a storedprocedure through a parameter array I'd appreciate it.
View 1 Replies
View Related