hi,
i have labels for data stored in one cell
eg: item1; item22; item231;
and i want to convert it in following output
(probably using substring and charindex)
No_question| item_position | label
1|1| item1
1|2| item22
1|3| item231
any idea?
How can I stop a group from being split across 2 pages?
1 table group
1 detail group consisting of 2 rows, can be N number of these per table group
e.g.
TG1
DG1row1
DG1row2
DG2row1
DG2row2
...
DGnrow1
DGnrow2
TG2
DG1row1
DG1row2
DG2row1
DG2row2
...
DGnrow1
DGnrow2
<--page break should occur here-->
TG3
DG1row1
DG1row2
DG2row1<--but it is actually appearing somewhere like this-->
DG2row2
...
DGnrow1
DGnrow2
If TG can fit on one page, then it should do so
I can't put a page break after a group, as it may only be 4 rows, this would be too wasteful
I am recieving complete row in one single column and I have pipe delimeter in this row . I want to retrieve the data in individual columns...Currently row is in one column
Data
02|vinod sahu
Expected output
Col1 col2
02 VInod Sahu
Running SQL2000
I have a one to many relationship between Flag and StudentFlag. I'm wanting to select each Flag.FlagID that exist as a column that contains the StudentFlag.Value per StudentFlag.StudentID (or null for that column if that StudentFlag row doesn't exist).
This single column appearing multple times in a single dataset has seemed difficult in a select statement. Is it posible in T-SQL?
Tables, Keys, and Relationships
CREATE TABLE [dbo].[Flag] (
[FlagID] [int] NOT NULL ,
[FlagName] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL
) ON [PRIMARY]
GO
CREATE TABLE [dbo].[StudentFlag] (
[StudentFlagID] [int] NOT NULL ,
[FlagID] [int] NULL ,
[StudentID] [int] NOT NULL ,
[FlagValue] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL
) ON [PRIMARY]
GO
ALTER TABLE [dbo].[Flag] WITH NOCHECK ADD
CONSTRAINT [PK_Flag] PRIMARY KEY CLUSTERED
(
[FlagID]
) ON [PRIMARY]
GO
ALTER TABLE [dbo].[StudentFlag] WITH NOCHECK ADD
CONSTRAINT [PK_StudentFlag] PRIMARY KEY CLUSTERED
(
[StudentFlagID]
) ON [PRIMARY]
GO
ALTER TABLE [dbo].[StudentFlag] ADD
CONSTRAINT [FK_StudentFlag_Flag] FOREIGN KEY
(
[FlagID]
) REFERENCES [dbo].[Flag] (
[FlagID]
)
GO
Sample Output
StudentID, FlagType1, FlagType2, FlagType3
1, 'yes', '2', null
2, null, null, 'X'
3, null, '7', 'X'
I have a value in a column '01-08-087-0101W5'. I would like to break this value down into 5 different columns. The column will be broken down at the dashes , so the 5 columns will have values like
01
08
087
101
5
I would also like to trim any leading 0's in the above values. i have been trying the following
SUBSTRING(column1,patindex('%[^0]%',column1) ,2) AS FROM_TWP
I have a table with 100 rows, 1 field (ID), and I would like to write a query to output it as 4 rows, and 25 columns.
Row data
ID
1
2
3
4
5
6
7
8
9
...
98
99
100
Output will be like
c1 c2 c3 c4 c5....
1 5 9 13
2 6 10 14
3 7 11 15
4 8 12 16
So I have a problem with combining cells: some of the cells are blank and some of the cells have NULL value.
The combined blank cells return perfect.
But the combined cells in which 1 or more contains NULL will return as NULL
0-4139-00-01OPTIONAL EQUIPMENT 139 - A -
0-4139-00-02NVG EQUIPMENT 139 - A -
0-4139-00-03NVG EQUIPMENT 139 - A -
0139-01-01BRAKE RESERVOIR NULL
A part of the script which i use is:
STUFF((SELECT ', ' + i.ac_type + ' - '
+ i.range_or_single+ ' ' + ' - ' + i.serialno_to
FROM msc_item_effectivity i
inner JOINmsc_item h
ONb.taskcard_verno_i = h.taskcard_verno_i
WHERE h.itemno_i = i.itemno_i
FOR XML PATH('')), 1, 1, '')
i.ac_type = 139
i.range_or_single = A
i.serialno_to = blank or NULL
I want the result of the blank value to be the same as the NULL value.
0139-01-01BRAKE RESERVOIR 139 - A -
So I have been trying to get mySQL query to work for a large database that I have. I have (lets say) two tables Table_One and Table_Two. Table_One has three columns: Type, Animal and TestID and Table_Two has 2 columns Test_Name and Test_ID. Example with values is below:
**TABLE_ONE**
Type Animal TestID
-----------------------------------------
Mammal Goat 1
Fish Cod 1
Bird Chicken 1
Reptile Snake 1
Bird Crow 2
Mammal Cow 2
Bird Ostrich 3
**Table_Two**
Test_name TestID
-------------------------
Test_1 1
Test_1 1
Test_1 1
Test_1 1
Test_2 2
Test_2 2
Test_3 3
In Table_One all types come under one column and the values of all Types (Mammal, Fish, Bird, Reptile) come under another column (Animals). Table_One and Two can be linked by Test_ID
I am trying to create a table such as shown below:
Test_Name Bird Reptile Mammal Fish
-----------------------------------------------------------------
Test_1 Chicken Snake Goat Cod
Test_2 Crow Cow
Test_3 Ostrich
This should be my final table. The approach I am currently using is to make multiple instances of Table_One and using joins to form this final table. So the column Bird, Reptile, Mammal and Fish all come from a different copy of Table_one.
For e.g
Select
Test_Name AS 'Test_Name',
Table_Bird.Animal AS 'Birds',
Table_Mammal.Animal AS 'Mammal',
Table_Reptile.Animal AS 'Reptile,
Table_Fish.Animal AS 'Fish'
From Table_One
[Code] .....
The problem with this query is it only works when all entries for Birds, Mammals, Reptiles and Fish have some value. If one field is empty as for Test_Two or Test_Three, it doesn't return that record. I used Or instead of And in the WHERE clause but that didn't work as well.
Part 1: When there is ~ (tilde) and has any value after it then it goes into a new row and duplicating the other columns like the facility in the screenshot attached and new column having the sequence.
Part 2: When there is ^ (Caret) its a new column irrespective of a value present or not
CREATE TABLE [dbo].[Equipment](
[EQU] [VARCHAR](50) NOT NULL,
[Notes] [TEXT] NULL,
[Facility] [VARCHAR](50) NULL)
INSERT INTO [dbo].[Equipment] ([EQU] ,[Notes] ,[Facility])
SELECT '1001','BET I^BOBBETT,DAN^1.0^REGULAR^22.09^22.090~BET II^^^REGULAR^23.56^0~','USA' union
SELECT '998','BET I^JONES, ALANA^0.50^REGULAR^22.09^11.0450~BET II^^^REGULAR^23.56^0~','Canada' UNION
select '55','BET I^SLADE,ADAM F.^1.5^REGULAR^27.65^41.475~','USA'
SELECT * FROM dbo.Equipment
I created the table in excel and attached the screenshot for a clear picture as to what is required. I use text to Columns in excel to achieve this not sure if there is anything similar in sql.
A#B#C
A#B
A#B#C#D
How do I split above value in columns by "#"?
I need output:
Column1 Column2 Column3 Column4
A B C
A B
A B C D
I want to display full name column as FirstName and LastName.
Eg if Full Name is Abhas Jadhav then i want to convert it into FirstName- Abhas and LastName - Jadhav
i.e. Before Space is FirstName and After Space is LastName.
Hi everyoneI guess this should be a simple question for the gurusI have a Data in a column which is to be places in 2 columns instead ofone. How do i go about doing it in MS SQL server? Could someone pleasehelp me. I could do it in access with an update query but things are alittle different in SQL server so I am a little lost.Eg.NameJohn?Doeto be split intoName LastNameJohn DoeThanks in advance.Prit
View 6 Replies View Related
I have a table called products with the values like
ProductId ProductName
10 A
20 D,E,F,G
30 B,C
40 H,I,J
I need to display each productid's with
ProductId ProductName
10 A
20 D
20 E
20 F
20 G
30 B
30 C
40 H
40 I
40 J
I will be appreciated if you can send me the code.
Thanks,
Mears
I have a table called products with the values like
ProductId ProductName
10 A
20 D,E,F,G
30 B,C
40 H,I,J
I need to display each productid's with
ProductId ProductName
10 A
20 D
20 E
20 F
20 G
30 B
30 C
40 H
40 I
40 J
I will be appreciated if you can send me the code.
Thanks,
Mears
I am trying to get an address field into 2 colums. I need the number value in one column and street name in another column.
The data is stored:
876 blue ct
9987 red dr
23 windyknoll
This is what I haveelect
substring(Address,0,charindex('',Address)) as number
,substring(Address, (charindex('',Address)+1)
,len(Address)) as address
from contact
Hi!
What I'd like to do is:
UPDATE table1
SET
A_TEXT_COLUMN = (SELECT another_text_column
FROM table2
WHERE table2_id = @precomputed_id_1)
WHERE table1_ID = @precomputed_id_2
Since the cells are text, this does not work. Since the cell to be updated is in an already exitant row, it's not possible to simply use insert.
I'd like to do something like (PSEUDOcode):
WRITETEXT(table1.A_TEXT_COLUMN, READTEXT(@textptr_initialised_to_point_at_target_c ell))
But the *actual* synatx of WRITETEXT and READTEXT seem totally inappropriate for any such trick...
Any hints or pointers HUGELY appreciated... THANX
Hi,
I'm working with MRS and I've got a table with a lot of entries. For each value in the table I'm trying to get the text colour to be set to 'red' when the value of the cell is less than 0. Otherwise remain black.
I can do this by setting the colour property cell by cell. But I have a lot of cells in the table. Is there a way to set the statement to apply to ALL cells in the table?
Basically I'm asking if there is a way to set the property in bulk instead of going through tediously cell by cell.
Any help would be much appreciated. Thanks!
I like to push 1 column into 2 different columns just to show it on the screen. So no import in another table ore something like that.
I have a table like this:
Select Name from Cars;
Result:
Col1
BMWMercedesFordAudi
But i like to make a query so it is displayed like this:
Col1 Col2
BMW FordMercedes Audi
So i can bound a table directly to that column!Is this possible with SQL, and how can i build it.Thanks.
Hi all,
I have a requirement like this ,
I have Address Column.It is containing data like Mr. K KK Tank Guntur Jal Bhavan, Univercity Road, Rajkot 9843563469
I have to split this into 3 more columns like(Address1,name,phoneno)--
Means i have 4 columns including Address Column.(Address,Address1,name,phoneno)
Example:
Address:Rajkot
Address1:Univercity Road
Name:Mr. K KK Tank Guntur Jal Bhavan
PhoneNO:9843563469
How can i acheive this one with out data lose in Address Column.
Thanks in advance.
SOURCE TABLE
ID DESCRIPTION
1 I am a programmer
2 I am a doctor
Destination Table
ID LINE DESCRIPTION(Varchar10)
1 1 I am a pro
1 2 grammer
2 1 i am a doc
2 2 tor
Please someone help me on this.
Hello,
Hoping someone here can help. Perhaps I'm missing something obvious, but I'm surprised not to see a data flow task in SSIS for splitting *columns* to different destinations. I see the Conditional Split task can be used to route a *row* one way or another, but what about columns of a single row?
As a simple and somewhat contrived example, let's say I have a row with twelve fields and I'm importing the row into a normalized data structure. There are three target tables with a 1-to-1 relationship (that is, logically they are one table, but physically they are three tables, with one of them considered the "primary" table), and the twelve input fields can be mapped to four columns in each of the three tables.
How do I "split" the columns? The best way I can see is to Multicast the row to three different OLE-DB Destinations, each of which inserts to one of the three target tables, only grabbing the four fields needed from the input row.
Or should I feed the row through three successive OLE-DB Command tasks, each one inserting into the appropriate table? This would offer the advantage, theoretically, of allowing me to grab the identity-based surrogate primary key from the first of the three inserts in order to enable the two subsequent inserts.
Thoughts?
Thanks in advance,
Dan
I would appreciate any help on this project. I have created an Access database that contains one vehicle. I have also included all options on that vehicle, which are in one column. Therefore the main criteria for the vehicle is listed each time for each different option. On my report I am grouping by the vin and placing the main criteria in the group header area of the report. The options are going into the detail section. How do I get the options to print in two columns within the detail section? I am unable to find any help on this subject, so I am asking you for help.
Thank you all! Timpy
Hi
This is probably a very basic question for most people in this group.
How do i split the data in a column in to 2 columns? This can be done in access with an update query but in MS SQL server I am not sure.
Here is an example of what i want to acheive
FName
John?Doe
FName LName
John Doe
thanks for the help
prit
I've a table similar to the one below, with a SKU, Category and Cost, and need using a simple select command, split the cost in two columns one for each category (1,2), I used a self-join, and it works, but it doesn't show values not equal in both categories
Declare @Tmp_SKUCatValue Table(
SKU char(7)
,Cetegory Int
,Unit_cost Decimal
);
INSERT INTO @Tmp_SKUCatValue (SKU, Cetegory,Unit_cost)
Values
('sku-001',1,120)
[code].....
The result is as
SKU----------UCost_Cat1-----UCost_Cat2
sku-001------120--------------222
sku-002------126--------------228
sku-003------132--------------234
sku-004------138--------------240
sku-005------144--------------246
-----------------------------------------------------------
but missing the following lines,
SKU----------UCost_Cat1-----UCost_Cat2
sku-006------333--------------null
sku-007------null--------------444
Is ok to not show sku-008 as it is not part of category 1 or 2?
I've a table as below
custid,companyname,phone,address
2,AAAAA,(222) 222-2222,address 2
3,cust 3,(333) 333-3333,address 3
5,BBBBB,(333) 333-3333,DDDDD
6,cust 6,(222) 222-2222,address 6
7,cust 7,(222) 222-2222,address 7
How to split csv values to new fields. so that the desired output should be as below
custidcompanynamephone address
2 AAAAA (222) 222-2222 address 2
3 cust 3 (333) 333-3333 address 3
5 BBBBB (333) 333-3333 DDDDD
6 cust 6 (222) 222-2222 address 6
7 cust 7 (222) 222-2222 address 7
I have a ipaddress column is there where i need to split the column into two columns because of values like below
172.26.248.8,Fe80::7033:acba:a4bd:f874
172.26.248.8,Fe80::7033:acba:a4bd:f874
172.26.248.8,Fe80::7033:acba:a4bd:f874
I have written the below query but it will throuh some error.
select SUBSTRING(IPAddress0, 1, CHARINDEX(',', IPAddress0) - 1) as IPAddress0
from IPADDRESS
error:
Msg 537, Level 16, State 2, Line 1
Invalid length parameter passed to the LEFT or SUBSTRING function.
Hi,
I have data like this in my table:
AppId Gender
1 x
2 y
3 x, y
4 x, y, z
I need to transform like this:
AppID Gender
1 x
2 y
3 x
3 y
4 x
4 y
4 z
How to do this?
Thanks in advance
HI,I HAVE AN EXCEL SHEET WITH SOME DATA, I WANT TO IMPORT THAT DATA (CELLBY CELL WITH MANIPULATION) INTO THE SQL SERVER TABLES BY USING STOREDPROCEDURE(IF POSSIBLE).IF ANYBODY HAVE DONE SIMILER TYPE OF JOB OR KNOWING ABOUT IT, PLS. LETME KNOW.THANKS IN ADV.T.S.NEGI
View 4 Replies View RelatedI have a single string "XYZ00001|Test_b|XYZ00002|Test_a|XYZ00003|Test_c" that will continue to grow over time.
Is there a way I can extract the values from the string into two separate columns?
XYZ0001 Test_b
XYZ0002 Test_a
XYZ0003 Test_c
I have a ipaddress column is there where i need to split the column into two columns because of
values like below
172.26.248.8,Fe80::7033:acba:a4bd:f874
172.26.248.8,Fe80::7033:acba:a4bd:f874
172.26.248.8,Fe80::7033:acba:a4bd:f874
I have written the below query but it will throw some error.
select SUBSTRING(IPAddress0, 1, CHARINDEX(',', IPAddress0) - 1) as IPAddress0
from IPADDRESS
error:
Msg 537, Level 16, State 2, Line 1
Invalid length parameter passed to the LEFT or SUBSTRING function.
I am trying to spilt records into days by the start - End datetime.
I would send an image and data but because I am new to the forum, I am blocked sending images.
"Body text cannot contain images or links until we are able to verify your account"
How I can forward an image.
I have a string ,want to split the values after every space as column value and insert them into a table
1306453 0 0 0 0 0
col1 col2 col3 col4 col5 col6
1306453 0 0 0 0 0
I have a table with a string value, where all values are seperated by a space/blank. I now want to use SQL to split all the values and insert them into a different table, which then later will result in deleting the old table, as soon as I got all values out from it.
Old Table:
Code:
ID, StringValue
New Table:
Code:
ID, Value1, Value2
Do note: Value1 is INT, Value2 is of nvarchar, hence Value2 can contain spaces... I just need to split on the FIRST space, then convert index[0] to int, and store index[1] as it is.
I can split on all spaces and just Select them all and add them like so: SELECT t.val1 + ' ' + t.val2... If I cant find the first space that is... I mean, first 2-10 characters in the string can be integer, but does not have to be.Shall probably do it in code instead of SQL?Now I want to run a query that selects the StringValue from OldTable, splits the string by ' ' (a blank) and then inserts them into New Table.
Code:
SELECT CASE CHARINDEX(' ', OldTable.stringvalue, 1)
WHEN 0 THEN OldTable.stringvalue
ELSE SUBSTRING(OldTable.stringvalue, 1, CHARINDEX(' ', OldTable.stringvalue, 1) - 1)
END
AS FirstWord
FROM OldTable
Found an example using strange things like CHARINDEX..But issue still remains, because the first word is of integer, or it does not have to be...If it isn't, there is not "first value", and the whole string shall be passed into "value2".How to detect if the very first character is of integer type?
Code:
@declare firstDigit int
IF ISNUMERIC(SUBSTRING(@postal,2,1) AS int) = 1
set @firstDigit = CAST(SUBSTRING(@postal,2,1) AS int)
ELSE
set @firstDigit = -1
[code]....