I have a parent record en some child records.
Let's say the child records have a field with a value in the range 1-9
Now I want to find the maximum value in the child records.
When I have that value, I want to write this value in a field in the parent record.
1) Should I do this in a (update) trigger?
2) How do you write such a trigger in sql-express?
thanks Klaas
Netherlands
I'm wondering how to calculate the current possible row width if all data where filled to max. I'm just curious if I'm approaching the 8060 max.
Sql Server 2005
Thanks,
Mitch
I have a fact table which lists the last 12 month historical sales of a product,country,month combination so the table structure is like:
<month, productID, countryID, (month-3 sales), (month-4 sales).........,(month-14 sales)>
I need to write an MDX query which will return a flag that indicates if a product has a gap of more than 2 consecutive months in terms of positive sales. So I calculate if there is a gap of 3 months. If yes, then return 1 else null. The calculation below is scoped at product level.
IIF(([month-3 sales]<=0 AND [month-4 sales]<=0 AND [month-5 sales]<=0)
OR ([month-4 sales]<=0 AND [month-5 sales]<=0 AND [month-6 sales]<=0)
OR ([month-5 sales]<=0 AND [month-6 sales]<=0 AND [month-7 sales]<=0)
...............
OR ([month-12 sales]<=0 AND [month-13 sales]<=0 AND [month-14 sales]<=0)),1,NULL)
Unfortunately I cannot do this calculation at relational level as a product may have a gap of more than 2 months at country level but may not have this at a higher level in geography.
optimizing this as the performance is bad and other calculated measures are dependent on this. Based on this calculation, I can write a scope which sums up all products so that I get the count of products with a gap of more than 2 months in sales.
I have also tried CASE statement and NESTED IIFs but the performance is worse than the above.
Hi,
via VBScript, I am inserting data into one table as below:
Code:
conn.Source = "INSERT INTO img (imageDesc,imageName,imageDate,imageUser,imageIP) VALUES ('"& ni &"','"& fn &"','"& Now() &"',"& Session("MM_UserID") &",'"& Request.ServerVariables("REMOTE_HOST") &"')"
In another table, I want to insert the primary key (imageID) of this newly inserted row into a new table called "t_image_Site" along with another value in another column.
Any advice/tutorials... this can be done with a trigger if I'm not mistaken?
JJ
HI ALL,
I AM USING SQL SERVER 2005.
I HAVE RETURN A RECURSIVE FUNCTION TO FIND OUT WHETHER THE NEXT DATE DOES NOT FALL WITHIN HOLIDAYS
BUT I AM GETING THIS ERROR
Maximum stored procedure, function, trigger, or view nesting level exceeded (limit 32).
THE CODE I USED IS
alter FUNCTION [dbo].[GetNextDay](@dt datetime , @empcode varchar(50) )
RETURNS datetime
AS
BEGIN
DECLARE @zoneid VARCHAR(50)
declare @lvlflag varchar(50)
declare @utdt DATETIME
DECLARE @RETDT DATETIME
DECLARE @COMPDT DATETIME
Select @lvlflag= b.ulm_user_field_flag from bbraun_emis.dbo.emp_reference a join bbraun_emis.dbo.user_lvl_master b on b.ulm_user_lvl_id = a.ER_USER_LVL and a.er_emp_code = @empcode
SELECT @zoneid = ZONECODE FROM bbraun_emis.dbo.VWREGIONLINK WHERE CITYCODE IN (SELECT DISTINCT HM_CITY_CODE FROM bbraun_emis.dbo.HOSP_MASTER WHERE HM_HOSP_CODE IN (SELECT HER_HOSP_CODE FROM bbraun_emis.dbo.HOSP_EMP_REL WHERE HER_EMP_CODE in(@EMPCODE)))
select @compdt = holiday_date from oriffconnect.dbo.holiday_master where zone_code = @zoneid and field_staff = @lvlflag and holiday_date = @dt
if(@@ROWCOUNT = 0)
begin
Select @utdt = DATEADD(dd,1,@utdt)
SeT @utdt = ([dbo].[GetNextDay](@utdt , @empcode))
end
IF(@@ROWCOUNT <> 0)
begin
set @utdt = @dt
end
Select @RETDT = @utdt
RETURN @RETDT
END
PLEASE HELP
I wanna used derived fields to improve select performance of my system.
How can I calculate the trigger cost in the system?
Hi i am trying to make a trigger that calculates a new due time from a start time. I have a hour target like 24 hours, but the dates have an starttime and stoptime or the days could even be closed. I need it to calculate the new due datetime using the 24 hours as effective working time.
Any ideas ?
Here's the problem. I want to insert age in years to a table of children, using a MS SQL trigger to calculate age from Date of Birth (DOB). DOB format is mm/dd/yyyy. The DOB input comes from an ASP Insert statement. I've tried to use DateDiff and a user-defined function to calculate age without any success. Also the trigger needs to account for children of less than 1 year old, could be a 0. Age is integer in the children table. Any help is greatly appreciated. The sooner the better. Even a kick start is better than nothing.
View 11 Replies View RelatedI have to build a database model, create tables and use triggers or/and procedures on it. It's about a library. Books are borrowed by students. They can make a reservation of a book.
I built the database model so far. My problem is how to represent following tasks:
- Students can borrow a maximum of 5 books at the same time.
- bookings/book reservations should be later processed in the order they occurred. That is, who first flagged the book also gets the book/books first
I have following entities:
- Book
- Book exemplar
- Borrowed by (a table between the entities Book exemplar and Student)
- Reserved for (a table between the entities Book exemplar and Student)
- Student
How would you represent the tasks I mentioned above in terms of triggers or procedures?...
Hi all,
I have writen a Function which call's the same function it self. I'm getting the error as below.
Maximum stored procedure, function, trigger, or view nesting level exceeded (limit 32).
Can any one give me a solution for this problem I have attached the function also.
CREATE FUNCTION dbo.GetLegsFor(@IncludeParent bit, @EmployeeID float)
RETURNS @retFindReports TABLE (EmployeeID float, Name nvarchar(255), BossID float)
AS
BEGIN
IF (@IncludeParent=1)
BEGIN
INSERT INTO @retFindReports SELECT MemberId,Name,referredby FROM Amemberinfo WHERE Memberid=@EmployeeID
END
DECLARE @Report_ID float, @Report_Name nvarchar(255), @Report_BossID float
DECLARE RetrieveReports CURSOR STATIC LOCAL FOR
SELECT MemberId,Name,referredby FROM Amemberinfo WHERE referredby=@EmployeeID
OPEN RetrieveReports
FETCH NEXT FROM RetrieveReports INTO @Report_ID, @Report_Name, @Report_BossID
WHILE (@@FETCH_STATUS = 0)
BEGIN
INSERT INTO @retFindReports SELECT * FROM dbo.GetLegsFor(0,@Report_ID)
INSERT INTO @retFindReports VALUES(@Report_ID,@Report_Name, @Report_BossID)
FETCH NEXT FROM RetrieveReports INTO @Report_ID, @Report_Name, @Report_BossID
END
CLOSE RetrieveReports
DEALLOCATE RetrieveReports
RETURN
END
Hello,
I am running this query
"delete from ims_domains where id=61"
and got the error
Maximum stored procedure, function, trigger, or view nesting level exceeded (limit 32)
Please let me know what should be the reason?
Thanks,
Ravi
Hi,
I face this error when i try to run my store procedure.
The sample of store procedure as following:
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_NULLS ON
GO
CREATE PROCEDURE sp_addUserAccess
with encryption
AS
SET NOCOUNT ON
DECLARE @COUNTER INT
SET @COUNTER = 0
DECLARE @i_compId INT
BEGIN
DECLARE C1 SCROLL CURSOR FOR
SELECT i_compId
FROM ltd_cms_company WHERE (i_owner = 176 or i_owner = 268) AND ti_recStatus = 1
END
OPEN C1
FETCH ABSOLUTE @COUNTER FROM C1 INTO
@i_compId
WHILE @@FETCH_STATUS = 0
BEGIN
INSERT INTO ltd_cms_userAccess ( i_loginId, i_groupId, i_compId, ti_updComp, ti_updLog, ti_updAccess, ti_owner, ti_acctMgr, ti_updContact, ti_updEvent )
VALUES ( 124, 0, @i_compId, 1, 1, 1, 1, 1, 1, 1)
SET @COUNTER = @COUNTER + 1
FETCH ABSOLUTE @COUNTER FROM C1 INTO
@i_compId
END
CLOSE C1
DEALLOCATE C1
SET NOCOUNT OFF
anyone can help me identify this error?
Thanks
Regards,
Jojomay
Hi all, I get this message when trying to update a tabel i have whichhas nested hierarchies.The current hierarchies beginning from root = 1 are up to the level 5.Before going into details and sample data with all the sql queries andprocedures, this limitation from Microsoft for nested levels .. isthere any way or trick to increase the level in generic?
View 1 Replies View RelatedI have created a delete trigger in Table1 and Table2. Once I delete a certain record in Table1 it will also delete that record in Table2 or vice versa. But once i delete certain record either in Table1 or Table2 it will create an error "Maximum stored procedure, function, trigger, or view nesting level exceeded (limit 32).". Can you help me on this?
View 4 Replies View RelatedI have some code I build 2 weeks ago which I’ve been running daily but it’s suddenly stopped working with the following error.
“The table "tbl_Intraday_Tmp" has been created, but its maximum row size exceeds the allowed maximum of 8060 bytes. INSERT or UPDATE to this table will fail if the resulting row exceeds the size limit” When I google this there seems to be a related to tables with vast numbers of columns.
My table tbl_Intraday_tmp is relatively small. It has 7 columns. 1 of varchar(5), 3 of decimal(9,3) and 2 of decimal(18,0). The bit I’m puzzled with is it was working and stopped.
I don’t recall changing anything but I wouldn’t rule that out. I ‘ve inspected the source files and I don’t believe they have changed either.
DECLARE
@FileName varchar(50),
@Path varchar(50),
@SqlCmd varchar(1000)
= '',
@ASXCode varchar(5),
@Offset decimal(18,0),
[code]....
I am using MS SQL server 2008, and i have a table with 350 columns and when i m trying to create one more column its giving error with below message -
Warning: The table XXX has been created, but its maximum row size exceeds the allowed maximum of 8060 bytes.
INSERT or UPDATE to this table will fail if the resulting row exceeds the size limit.
how can i resolve this?
SQL Server 2000 8.00.760 (SP3)I've been working on a test system and the following UDF worked fine.It runs in the "current" database, and references another database onthe same server called 127-SuperQuote.CREATE FUNCTION fnGetFormattedAddress(@WorkID int)RETURNS varchar(130)ASBEGINDECLARE@Address1 As varchar(50)@ReturnAddress As varchar(130)SELECT@Address1 = [127-SuperQuote].dbo.tblCompany.Address1FROM[Work] INNER JOIN[127-SuperQuote].dbo.tblCompany ON [Work].ClientID =[127-SuperQuote].dbo.tblCompany.CompanyIDWHERE[Work].WorkID = @WorkIDIF @Address1 IS NOT NULLSET @ReturnAddress = @ReturnAddress + @Address1 + CHAR(13)+ CHAR(10)RETURN @ReturnAddressENDSo now the system has gone live and it turns out that the live"SuperQuote" database is on a different server.I've linked the server and changed the function as below, but I get anerror both in QA and when checking Syntax in the UDF builder:The number name 'Zen.SuperQuote.dbo.tblCompany' contains more than themaximum number of prefixes. The maximum is 3.CREATE FUNCTION fnGetFormattedAddress(@WorkID int)RETURNS varchar(130)ASBEGINDECLARE@Address1 As varchar(50)@ReturnAddress As varchar(130)SELECT@Address1 = Zen.SuperQuote.dbo.tblCompany.Address1FROM[Work] INNER JOINZen.SuperQuote.dbo.tblCompany ON [Work].ClientID =Zen.SuperQuote.dbo.tblCompany.CompanyIDWHERE[Work].WorkID = @WorkIDIF @Address1 IS NOT NULLSET @ReturnAddress = @ReturnAddress + @Address1 + CHAR(13)+ CHAR(10)RETURN @ReturnAddressENDHow can I get round this? By the way, I've rather simplified thefunction to ease readability. Also, I haven't posted any DDL because Idon't think that's the problem!ThanksEdward
View 2 Replies View RelatedHey,
I'm new to this whole SQL Server 2005 thing as well as database design and I've read up on various ways I can integrate business constraints into my database. I'm not sure which way applies to me, but I could use a helping hand in the right direction.
A quick explanation of the various tables I'm dealing with:
WBS - the Work Breakdown Structure, for example: A - Widget 1, AA - Widget 1 Subsystem 1, and etc.
Impacts - the Risk or Opportunity impacts for the weights of a part/assembly. (See Assemblies have Impacts below)
Allocations - the review of the product in question, say Widget 1, in terms of various weight totals, including all parts. Example - September allocation, Initial Demo allocation, etc. Mostly used for weight history and trending
Parts - There are hundreds of Parts which will eventually lead to thousands. Each part has a WBS element. [Seems redundant, but parts are managed in-house, and WBS elements are cross-company and issued by the Government]
Parts have Allocations - For weight history and trending (see Allocations). Example, Nut 17 can have a September 1st allocation, a September 5th allocation, etc.
Assemblies - Parts are assemblies by themselves and can belong to multiple assemblies. Now, there can be multiple parts on a product, say, an unmanned ground vehicle (UGV), and so those parts can belong to a higher "assembly" [For example, there can be 3 Nut 17's (lower assembly) on Widget 1 Subsystem 2 (higher assembly) and 4 more on Widget 1 Subsystem 5, etc.]. What I'm concerned about is ensuring that the weight roll-ups are accurate for all of the assemblies.
Assemblies have Impacts - There is a risk and opportunity impact setup modeled into this design to allow for a risk or opportunity to be marked on a per-assembly level. That's all this table represents.
A part is allocated a weight and then assigned to an assembly. The Assemblies table holds this hierarchical information - the lower assembly and the higher one, both of which are Parts entries in the [Parts have Allocations] table.
Therefore, to ensure proper weight roll ups in the [Parts have Allocations] table on a per part-basis, I would like to check for any inserts, updates, deletes on both the [Parts have Allocations] table as well as the [Assemblies] table and then re-calculate the weight roll up for every assembly. Now, I'm not sure if this is a huge performance hog, but I do need to keep all the information as up-to-date and as accurate as possible. As such, I'm not sure which method is even correct, although it seems an AFTER DML trigger is in order (from what I've gathered thus far). Keep in mind, this trigger needs to go through and check every WBS or Part and then go through and check all of it's associated assemblies and then ensure the weights are correct by re-summing the weights listed.
If you need the design or create script (table layout), please let me know.
Thanks.
Are there any limitations or gotchas to updating the same table whichfired a trigger from within the trigger?Some example code below. Hmmm.... This example seems to be workingfine so it must be something with my specific schema/code. We'reworking on running a SQL trace but if anybody has any input, fireaway.Thanks!create table x(Id int,Account varchar(25),Info int)GOinsert into x values ( 1, 'Smith', 15);insert into x values ( 2, 'SmithX', 25);/* Update trigger tu_x for table x */create trigger tu_xon xfor updateasbegindeclare @TriggerRowCount intset @TriggerRowCount = @@ROWCOUNTif ( @TriggerRowCount = 0 )returnif ( @TriggerRowCount > 1 )beginraiserror( 'tu_x: @@ROWCOUNT[%d] Trigger does not handle @@ROWCOUNT[color=blue]> 1 !', 17, 127, @TriggerRowCount) with seterror, nowait[/color]returnendupdate xsetAccount = left( i.Account, 24) + 'X',Info = i.Infofrom deleted, inserted iwhere x.Account = left( deleted.Account, 24) + 'X'endupdate x set Account = 'Blair', Info = 999 where Account = 'Smith'
View 1 Replies View RelatedThis Audit Trigger is Generic (i.e. non-"Table Specific") attach it to any tabel and it should work. Be sure and create the 'Audit' table first though.
The following code write audit entries to a Table called
'Audit'
with columns
'ActionType' //varchar
'TableName' //varchar
'PK' //varchar
'FieldName' //varchar
'OldValue' //varchar
'NewValue' //varchar
'ChangeDateTime' //datetime
'ChangeBy' //varchar
using System;
using System.Data;
using System.Data.SqlClient;
using Microsoft.SqlServer.Server;
public partial class Triggers
{
//A Generic Trigger for Insert, Update and Delete Actions on any Table
[Microsoft.SqlServer.Server.SqlTrigger(Name = "AuditTrigger", Event = "FOR INSERT, UPDATE, DELETE")]
public static void AuditTrigger()
{
SqlTriggerContext tcontext = SqlContext.TriggerContext; //Trigger Context
string TName; //Where we store the Altered Table's Name
string User; //Where we will store the Database Username
DataRow iRow; //DataRow to hold the inserted values
DataRow dRow; //DataRow to how the deleted/overwritten values
DataRow aRow; //Audit DataRow to build our Audit entry with
string PKString; //Will temporarily store the Primary Key Column Names and Values here
using (SqlConnection conn = new SqlConnection("context connection=true"))//Our Connection
{
conn.Open();//Open the Connection
//Build the AuditAdapter and Mathcing Table
SqlDataAdapter AuditAdapter = new SqlDataAdapter("SELECT * FROM Audit WHERE 1=0", conn);
DataTable AuditTable = new DataTable();
AuditAdapter.FillSchema(AuditTable, SchemaType.Source);
SqlCommandBuilder AuditCommandBuilder = new SqlCommandBuilder(AuditAdapter);//Populates the Insert command for us
//Get the inserted values
SqlDataAdapter Loader = new SqlDataAdapter("SELECT * from INSERTED", conn);
DataTable inserted = new DataTable();
Loader.Fill(inserted);
//Get the deleted and/or overwritten values
Loader.SelectCommand.CommandText = "SELECT * from DELETED";
DataTable deleted = new DataTable();
Loader.Fill(deleted);
//Retrieve the Name of the Table that currently has a lock from the executing command(i.e. the one that caused this trigger to fire)
SqlCommand cmd = new SqlCommand("SELECT object_name(resource_associated_entity_id) FROM
ys.dm_tran_locks WHERE request_session_id = @@spid and resource_type = 'OBJECT'", conn);
TName = cmd.ExecuteScalar().ToString();
//Retrieve the UserName of the current Database User
SqlCommand curUserCommand = new SqlCommand("SELECT system_user", conn);
User = curUserCommand.ExecuteScalar().ToString();
//Adapted the following command from a T-SQL audit trigger by Nigel Rivett
//http://www.nigelrivett.net/AuditTrailTrigger.html
SqlDataAdapter PKTableAdapter = new SqlDataAdapter(@"SELECT c.COLUMN_NAME
from INFORMATION_SCHEMA.TABLE_CONSTRAINTS pk ,
INFORMATION_SCHEMA.KEY_COLUMN_USAGE c
where pk.TABLE_NAME = '" + TName + @"'
and CONSTRAINT_TYPE = 'PRIMARY KEY'
and c.TABLE_NAME = pk.TABLE_NAME
and c.CONSTRAINT_NAME = pk.CONSTRAINT_NAME", conn);
DataTable PKTable = new DataTable();
PKTableAdapter.Fill(PKTable);
switch (tcontext.TriggerAction)//Switch on the Action occuring on the Table
{
case TriggerAction.Update:
iRow = inserted.Rows[0];//Get the inserted values in row form
dRow = deleted.Rows[0];//Get the overwritten values in row form
PKString = PKStringBuilder(PKTable, iRow);//the the Primary Keys and There values as a string
foreach (DataColumn column in inserted.Columns)//Walk through all possible Table Columns
{
if (!iRow[column.Ordinal].Equals(dRow[column.Ordinal]))//If value changed
{
//Build an Audit Entry
aRow = AuditTable.NewRow();
aRow["ActionType"] = "U";//U for Update
aRow["TableName"] = TName;
aRow["PK"] = PKString;
aRow["FieldName"] = column.ColumnName;
aRow["OldValue"] = dRow[column.Ordinal].ToString();
aRow["NewValue"] = iRow[column.Ordinal].ToString();
aRow["ChangeDateTime"] = DateTime.Now.ToString();
aRow["ChangedBy"] = User;
AuditTable.Rows.InsertAt(aRow, 0);//Insert the entry
}
}
break;
case TriggerAction.Insert:
iRow = inserted.Rows[0];
PKString = PKStringBuilder(PKTable, iRow);
foreach (DataColumn column in inserted.Columns)
{
//Build an Audit Entry
aRow = AuditTable.NewRow();
aRow["ActionType"] = "I";//I for Insert
aRow["TableName"] = TName;
aRow["PK"] = PKString;
aRow["FieldName"] = column.ColumnName;
aRow["OldValue"] = null;
aRow["NewValue"] = iRow[column.Ordinal].ToString();
aRow["ChangeDateTime"] = DateTime.Now.ToString();
aRow["ChangedBy"] = User;
AuditTable.Rows.InsertAt(aRow, 0);//Insert the Entry
}
break;
case TriggerAction.Delete:
dRow = deleted.Rows[0];
PKString = PKStringBuilder(PKTable, dRow);
foreach (DataColumn column in inserted.Columns)
{
//Build and Audit Entry
aRow = AuditTable.NewRow();
aRow["ActionType"] = "D";//D for Delete
aRow["TableName"] = TName;
aRow["PK"] = PKString;
aRow["FieldName"] = column.ColumnName;
aRow["OldValue"] = dRow[column.Ordinal].ToString();
aRow["NewValue"] = null;
aRow["ChangeDateTime"] = DateTime.Now.ToString();
aRow["ChangedBy"] = User;
AuditTable.Rows.InsertAt(aRow, 0);//Insert the Entry
}
break;
default:
//Do Nothing
break;
}
AuditAdapter.Update(AuditTable);//Write all Audit Entries back to AuditTable
conn.Close(); //Close the Connection
}
}
//Helper function that takes a Table of the Primary Key Column Names and the modified rows Values
//and builds a string of the form "<PKColumn1Name=Value1>,PKColumn2Name=Value2>,......"
public static string PKStringBuilder(DataTable primaryKeysTable, DataRow valuesDataRow)
{
string temp = String.Empty;
foreach (DataRow kColumn in primaryKeysTable.Rows)//for all Primary Keys of the Table that is being changed
{
temp = String.Concat(temp, String.Concat("<", kColumn[0].ToString(), "=", valuesDataRow[kColumn[0].ToString)].ToString(), ">,"));
}
return temp;
}
}
The trick was getting the Table Name and the Primary Key Columns.
I hope this code is found useful.
Comments and Suggestion will be much appreciated.
Table 1
First_Name
Middle_Name
Surname
John
Ian
Lennon
Mike
Buffalo
Tyson
Tom
Finney
Jones
Table 2
ID
F
M
S
DOB
1
Athony
Harold
Wilson
24/4/67
2
Margaret
Betty
Thathcer
1/1/1808
3
John
Ian
Lennon
2/2/1979
4
Mike
Buffalo
Tyson
3/4/04
5
Tom
Finney
Jones
1/1/2000
I want to be able to create a trigger that updates table 2 when a row is inserted into table 1. However Im not sure how to increment the ID in table 2 or to update only the row that has been inserted.
A
ID
Name
1
Joe
2
Fred
3
Ian
4
Bill
B
ID
1
4
I want to be able to create a trigger so that when a row is inserted into table A by a specific user then the ID will appear in table B. Is it possible to find out the login id of the user inserting a row?
I believe the trigger should look something like this:
create trigger test_trigger
on a
for insert
as
insert into b(ID)
select i.id
from inserted i
where
--specific USER
hi, im trying to get the last row of a column by using this code
cmd.CommandText = "SELECT max(orderID) as orderID from orders where memberNo = '" & Session.Item("memberNum") & "'"but it return me 1 instead which is the smallest value in my orderID column n located in the first rowthen i try to use this code but they say got syntax errorcmd.CommandText = "SELECT max(orderID) as orderID from orders where memberNo = '" & Session.Item("memberNum") & "'" ' order by orderID asc " ' and orderID = '" & Session("ordersID") & "'"
can anyone tell me the right way to write the syntax??
thx in advance
Does anyone know the specific website that documents the maximum RAM SQL 7.0 Standard and Enterprise edition can handle within Windows 2000 Server and Windows 2000 Advanced server? All help appreciated!!
darius
Can anyone tell me the maximum number of (if there is a maximum) for the following :-
1. SQL Server Users per Database
2. Roles per Database
3. Connections per Server
4. Logins per Server
Thanks.
Hi Everybody,
Our development team is doing some stuff in ASP. They are interested only in char and varchar
data types. They clearly told us that they are not going with text and image data types.
Is it possible to make a row size behind 8060 bytes in a table without text and image data types?.
tks in advance,
Sri.
Hi,
I have a table with 188376 rows and the data size = 3012 KB, index size = 5884 KB .
LE threshold max is set to 2000 and LE threshol percent to 20%
I have an index on that table and observed that it is not getting used.
I would like to know whether sql optimizer uses the index based on the cost
of the query plan or does the table scan once the LE thresholdlimit is reached
overriding the optimized plan.
thanks,
MMS
I'm using replication between two server, but I don't know the maximum record will be move from Database 1 on Server1 to Database2 on Server2 in per minute.please help me, thanks!
View 2 Replies View Relatedhow to filter on a maximum value ?
My query is this:
SELECT
ProdspecUID
,itemcode
,model
,revno
FROM prodspec
The revision numbers (revno) are unique per itemcode.I would like to get only the rows with the highest revision per itemcode, but I also need the prodspecUID with is the index key and therefore unique.I have tried MAX() and TOP 1's in sub queries, but up until now without any result.
Hello
Without technical information and DB design, I wish to know the maximum entries in MS SQL in million. I guest for access are a limit of 2 million and a 2GB DB.
How much for MS SQL in max. entries and how much in GB?
A lot of thx for your feedback.
Dominique Javet
hi guys,
I have 4 columns and 3 rows. Columns are Name, Age, Gender and Weight. I have values entered for each column. I need to pick the highest value of weight if Name, Age, Gender are same and put that into new table. how can i do that?
Ex Table
-----------------
ColName====> Field Name
------------
xyz
abc
xyz
abc
abc
sdf
abc
....
....
---------
In table column string. i need maximum ColName.. In above table maximum ColName is abc... also top 3 maximum ColName i need...
Result
------
abc
How to i'll get any query........
Top 3 Maximum Result
--------------------
abc
xyz
sdf
----------------------------
this also.......
Hi...
I have written a stored procedure with number of inserts as the input variables which will input those many rows into my execution table... When i try to input more than 31 rows it gives me a error shown below.... I have a trigger attached to the execution table where i am inserting the rows... I am unable to sort out the error..
If anyone knows whats the problem Please reply.... Thank you....
Msg 217, Level 16, State 1, Procedure runtime_insert_elevator_table, Line 105
Maximum stored procedure, function, trigger, or view nesting level exceeded (limit 32).
anup