Calculate Total Tuition By Accumulating Column Values ( Loop?)
Jun 3, 2004
I am trying to create a procedure which will calculate the total tuition
This process involves 3 tables.
Contract table has tuition information which is all $100 (set price).
Discount table has discount type and discount percentage (ex. 0.3) on each discount type.
ContractDiscount table have contract number and discount number to connect both tables
I think I need to create a loop since some contract gets more than one discount.
I have to calculate and get result nee to be like this
total_tuition = (tuition - discountPer * tuition) - this has to be a loop condition
I am trying to calculate a whole school total tuition. I've got helped with individual tuition total which is
create proc sp_individualtuition as select c.contractNum, (c.tuition-((sum(d.discountPer))* c.tuition)) as totaltuition from contract c, contractDiscount cd, discount d where c.contractNum = cd.contractNum and cd.discountNum =d.discountNum group by c.contractNum, c.tuition
however how can i calculate the whole school total tuition (adding all the individual total tuition)?
my contract, contractDiscount and discount DDL are down below
create table contract( contractNum int identity(1,1) primary key, contractDate smalldatetime not null, tuition money not null, studentId char(4) not null foreign key references student (studentId), contactId int not null foreign key references contact (contactId) );
create table contractDiscount( contractNum int not null, discountNum char(3) not null );
Like all location details stored from all months in these table
here Dr=debit,Cr=Credit Formula= 'Dr-Cr' to find the salary wavges of amount
so i made the query to find the amount for may
select fs_locn, fs_accno, amount=sum(case when fs_accno like 'E%' and fs_tran_type='Dr' then fs_amount when fs_accno like 'E%' and fs_tran_type='Cr' then fs_amount * -1 end ) from accutn_det where fs_trans_date between '01-may-2014' and '31-may-2014' groupby fs_locn,fs_accno
now i need the sum values of all costcenter for the particular account.how to do that?
I'm trying to create an accumulating field based on a set of records. I need to fill in daily amount balances that accumulates on a daily basis. But I can't seem to figure out how to create a total for the daily dates and have it add on additional amounts if needed.
Now I already have a table with the dates created via a stored procedure. I have a set of dates from 5/5/2000 to 5/8/2000. So that results set should look like this:
I'm trying to creating a rolling sum that accumulates the amount field for each daily record and if a new amount is listed, then roll that amount into the total. If you have any suggestions about how to perform this rolling total via TSQL or SSIS, I would greatly appreciate it.
I'm using this query to to calculate yearly finance values.
select [Year],[FinanceValue-2014],[FinanceValue-2013],[FinanceValue-2012],[FinanceValue- 2014]-[FinanceValue-2013] as [FinanceValue Variance]
Now I need to multiply the [FinanceValue Variance] * 2.50 and for that how can I use the alias name as column in the query. I tried this but it says invalid column name.
select [Year],[FinanceValue-2014],[FinanceValue-2013],[FinanceValue-2012],[FinanceValue- 2014]-[FinanceValue-2013] as [FinanceValue Variance], [FinanceValue Variance] * 2.50 as [NewVariance] from Finance
SumofVariance output will be like 5690.5893656 Also how can I show the SumofVariance to round off 4 decimal places like this 5690.5894.
Very new to SQL and trying to get this query to run. I need to sum the total trips and total values as separate columns by day to insert them into another table.....
My code is as follows;
Insert Into [dbo].[CombinedTripTotalsDaily] ( Year, Month, Week, DayNo, Day, Trip_Date,
We are close to exceeding the Maximum Row size of 8K per row and the CIO asked me "how close are we to reaching the 8K row limit?"
I began by looking at byte requirements for the data types we are using from the systypes table then I wondered, do the indecie, Foreign Keys and Primary Keys use bytes which must be included in my Calculation for current number of bytes used per Row.
Question: How do I calculate Current total number of bytes used per row.
I have a SSRS report. I am displaying TOP 10 Stores by sales by creating a filter on group Store. It has 3 row groups (Store, brand, product).
There is no column group. In each cell, I am using sum function in expression (Sum(Fields!TotalSales.Value).
I am adding Totals by going on Group properties, but I am getting totals of all the rows not the total of all the groups within my Store level (which is my top Parent group).
Store Total sales(CW) TotalSales(LW) A 2 1 -expression used to calculated this value is sum(Fields!TotalSales.Value) B 3 2 C 7 3
I want subtotal =12 AND 6 under respective columns . ALSO, my store (A, B, C) can be expanded into Brands and brands into Products. I tried using running value but its not working as I have 3 groups within Store row parent group and I am doing a SUM on each group.
I have to calculate the total working hours between days, there hours must get automatically round off to nearest value example:
Date :12-05-2013 time : 4:15 will change to 4.00 and if Date :13-05-2013 time: 4:25 then needs to 4.30 and sum the above total hours and results Total : 8.30 hrs.
Hi All, I have a table call case and case_status have two fields, date and status as below: date status 04/01/2006 open 04/05/2006 closed 04/10/2006 open 04/15/2006 closed Whenever i open and closed the case, one record is insert into the case_status table. Now I would need to calculate the total days of the case in storeprocedure. Anyone can help me please. Aung
I created a PowerPivot measure which is a ratio Ratio = Number of Events/Time calculated on 12 months. I would like the grand total to be this Rate Sum(Number Of Events)/Sum(Time calculated).
In my Pivot I have one measure which I called Value and this value can have different types depending on one attribute.For instance one attribute is number of events, an other one is time and the third one is ratio.I want to display a custom grand total simple sum for events and time and a calculation of my ratio for ratio.
For instance 201501 201502 201503 TOTAL Number of events 8 10 10 28 Time 5 5 4 14 Ratio 8/5 10/5 10/4 28/14
Declare @StartDt date = '2015-03-15' Declare @EndDt date = DATEADD(M, 1, @StartDt) declare @Days int = DATEDIFF(d, @StartDt, @EndDt) declare @TBLSales as table(SaleDate date, Value money) DECLARE @Today date declare @TBLSalesCounts as table( StatusDesc varchar(100), Value money)
[Code] ....
I end up with the following result :
How would I alter my while loop to only insert the sum total of each day, instead of creating duplicates for each day.
E.g. 2015-04-22 1150.00 2015-04-21 785.00 2015-04-20 750.00
We have SharePoint list which has, say, two columns. Column A and Column B.
Column A can have three values - red, blue & green.
Column B can have four values - pen, marker, pencil & highlighter.
A typical view of list can be:
Column A - Column B red - pen red - pencil red - highlighter blue - marker blue - pencil green - pen green - highlighter red - pen blue - pencil blue - highlighter blue - pencil
We are looking to create a report from SharePoint List using SSRS which has following view:
red blue green pen 2 0 1 marker 0 1 0 pencil 1 3 0 highlighter 1 1 1
We tried Sum but not able to display in single row.
I have an SSIS package that imports data from an Excel file, replaces any value in Excel that reads "NULL" to "", then writes the data to a couple of databases.
What I have discovered today, is I have two columns of dates, an admit date and discharge date column, and what I need to do is anywhere I have a null value in the discharge date column, I have to replace it with the value in the admit date column.
I have searched around online and tried a few things using the Replace funtion in Derived columns but no dice so far.
Hi ALL, I need help in calculating sum of market value based on property_id. The sum should be calculated by finding the average market value for a given property and then sum the individual average of the property to get the Distinct sum.
I have a very little knowlegde in Cubes and analysis services. I need to perform this distinct sum by using calculated members using MDX on SQL server 2000.
How I can calculate the 'SUM of 100' of EDSUM column for EDCOST column. Every EDCOST should have sum of 100 on the calculation of EDSUM. I just want to know which is the EDCOST which has <>sum of 100.
Create table #sum (ED numeric, EDCOST numeric, EDName char(6), EDSum numeric, EDCode char(2)) Insert into #sum values (121, 2000,'HLMO',98,'DT') Insert into #sum values (122, 2000,'HLMT',2,'DT') Insert into #sum values (123, 2001,'HLMO',100,'DT') Insert into #sum values (124, 2002,'HLMD',97,'DT')
I am trying to create a report in SRS that will calculate a Composite Score based on the Sum of other scores and then that Sum is divided by 12.
Here is a copy of the Query I have created to calculate the numbers I want to use, but when I create the expression in SRS the calculations don't come out correctly. The expression that I use in SRS is at the bottom of the Script.
Thanks in Advance
--6 Trait_03052008.sql
--Pull test scores for 6 Trait out of Campus for SRS reports.
SELECT s.lastname+','+' '+s.firstname AS Student, e.grade, sm.lastname+','+' '+sm.firstname AS Teacher, sc.name AS School,
t.name AS Test, t.code, ts.rawscore,
CASE WHEN t.name = '1 Ideas' AND ts.rawscore IS NOT NULL THEN CAST(ts.rawscore * 3 AS Numeric)END AS IComp,
CASE WHEN t.name = '2 Organization' AND ts.rawscore IS NOT NULL THEN CAST(ts.rawscore * 3 AS Numeric) END AS OComp,
CASE WHEN t.name = '3 Voice' AND ts.rawscore IS NOT NULL THEN CAST(ts.rawscore * 2 AS Numeric)END AS VComp,
CASE WHEN t.name = '4 Word Choice' AND ts.rawscore IS NOT NULL THEN CAST(ts.rawscore * 2 AS Numeric)END AS WComp,
CASE WHEN t.name = '5 Sentence Fluency' AND ts.rawscore IS NOT NULL THEN CAST(ts.rawscore AS Numeric) END AS SComp,
CASE WHEN t.name = '6 Conventions' AND ts.rawscore IS NOT NULL THEN CAST(ts.rawscore AS Numeric)END AS CComp
FROM testscore ts
JOIN student s ON s.personid = ts.personid
JOIN roster r ON r.personid = s.personid
JOIN test t ON t.testid = ts.testid
JOIN calendar ca ON ca.calendarid = s.calendarid
JOIN enrollment e ON e.enrollmentid = s.enrollmentid and e.calendarid = ca.calendarid
JOIN section se ON se.sectionid = r.sectionid
JOIN course c ON c.courseid = se.courseid AND c.calendarid = ca.calendarid
JOIN school sc ON sc.schoolid = s.schoolid
JOIN staffmember sm ON sm.personid = se.teacherpersonid AND sm.schoolid = ca.schoolid
WHERE t.code LIKE '6%' AND c.calendarid =50 AND c.homeroom = 1
GROUP BY s.lastName,s.firstName,e.grade,sm.lastName,sm.firstName,sc.name,t.name,t.code,ts.rawScore
ORDER BY [Student], t.code, t.name DESC
Expression being used in SRS to calculate the Composite Score.
I am building a customerlist within the customer sales of a period. I have a dataset with two tables: "customer" and "customer_ledger_entry".
In the report I will present the customer number, the customer name and the sales. The problem is the sales value is not available as a field, but I have to calculate this value from the "customer_ledger_entry" table. In this table are several entries (invoices, credit notes, etc.)
How to calculate the values from a underlying table?
