Call A Stored Procedure For Data Push
May 2, 2007Is it possible to call a stored procedure on the remote sql server to do a push (insert the data onto the main sql server)?
Is it possible to call a stored procedure on the remote sql server to do a push (insert the data onto the main sql server)?
I need to call a stored procedure to insert data into a table in SQL Server from SSIS data flow task.
I am currently trying to use OLe Db Destination, but I am not sure how to map inputs to OLE DB Destination to my stored procedure insert.
Thanks
I want to insert data calling a stored procedure and call this from a Data Flow destination object. Is it possible?
I understand that Ole Db Command transformation object can call stored procedure, but that will not rollback in the event of error in the middle.
I understand that Ole Db Destination object will rollback in middle of import, but I don't see how to do the insert by calling stored procedure. "Sql Command" option in Ole Db Destination object does not seem to present solution to the problem.
Am I missing something here or is Ssis / Microsoft demanding that Insert stored procedure not be used when using Data Flow destination object to insert data into target table?
I have a site that will run a DTS package from a stored procedure when a user pushes a button. I know the stored procedure works and exectures. I need the .net code on how to execute this particular type of SQL statement.
Any help would be AWESOME.
THX
This is the stored procedure stored in EM:
CREATE PROCEDURE spExportData AS
Begin TransactionSet nocount onEXEC master..xp_cmdshell 'dtsrun /Ssql-06-dba /NAdultExport -E'CommitGO
The code below is what I am currently using and is not working.Protected Sub btnUpdateList_Clicked(Sender As Object, E As System.EventArgs) Dim strProc As String = "spExportData" Dim MyConnClass as New SQLConns Dim sqlConn as SqlConnection Dim myCommand As New SqlCommand sqlConn = MyConnClass.OpenConn("ConnAdultEd") MyCommand.CommandType = CommandType.StoredProcedure MyCommand.CommandText = strProc MyCommand.Connection = sqlConn MyCommand.ExecuteNonQuery() MyConnClass.CloseConn(sqlConn) statuslbl.text = "File updated" End Sub
I'm having a hard time to getting back an xml data back from a stored procedure executed by an Execute SQL task.
I'm passing in an XML data as a parameter and getting back resulting XML data as a parameter. The Execute SQL task is using ADO connection to do this job. The two parameters(in/out) are type of "string" and mapped as string.
When I execute the task, I get the following error message.
[Execute SQL Task] Error: Executing the query "dbo.PromissorPLEDataUpload" failed with the following error: "The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. Parameter 2 ("@LogXML"): Data type 0xE7 has an invalid data length or metadata length.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
I also tried mapping the parameter as XML type, but that didn't work either.
If anyone knows what's going on or how to fix this problem please let me know. All I want to do is save returning XML data in the parameter to a local package variable.
Thanks
I have a stored procedure that calls a msdb stored procedure internally. I granted the login execute rights on the outer sproc but it still vomits when it tries to execute the inner. Says I don't have the privileges, which makes sense.
How can I grant permissions to a login to execute msdb.dbo.sp_update_schedule()? Or is there a way I can impersonate the sysadmin user for the call by using Execute As sysadmin some how?
Thanks in advance
I have a stored procedure I created in SQL server 2005. Now I need to call the stored procedure in C#. Can someone help me out here? What is the C# code I need to call this stored procedure? I have never done this before and need some help.
CREATE PROCEDURE [dbo].[MarketCreate]
( @MarketCode nvarchar(20), @MarketName nvarchar(100), @LastUpdateDate nvarchar(2),)
ASINSERT INTO Market( MarketCode MarketName LastUpdateDate)VALUES( @MarketCode @MarketName @LastUpdateDate
)
I have created a stored procedure only with an insert statement in sql server 2005.
How can i call this stored procedure through code in ASP.NET page using vb.
i want to pass one parameter that comes from a text box in asp.net page.
my emailid is: g12garg@yahoo.co.in pls reply.
Thank you
Gaurav
Does anyone give me syntax for adding a bcp script within a stored procedure..I had done it once 3 yrs back does'nt seem to work now, and I do not know where I am going wrong??
Thanks
Hi, If I have a dll file and I know the interface of that dll file. How can I use stored procedure to call this dll file? Thank you.
View 1 Replies View RelatedHi, If I have a dll file and I know the interface of that dll file. How can I use stored procedure to call this dll file? Thank you.
View 2 Replies View RelatedGreetings,
Even though this may be not right place with this issue I would like to try!
I facing with the problem “Object Variable or With Block variable not set” while I am trying to execute the stored procedure from Ms. Access form.
I need some help very badly or maybe a good sample of code that works in this issue is very welcome.
Many thanks in Advance
hi,
i created a stored procedure and below is the code segment of it;
create Procedure test1
@price as varchar(50) output,
@table as varchar(50) = ''
AS
Declare @SQL_INS VarChar(1000)
SELECT @SQL_INS = 'select ['+@price+'] from ['+@table+']'
Exec (@SQL_INS)
Procedure gets 2 parameters, one of them is just INPUT parameter and the other one is both OUTPUT and INPUT. What i wanna do is to get the result set of this procedure to use in my application.
Hi, i wanna know if we can call a stored procedure from another one. If yes, what's the syntax?
Thanks
Respected Sir/MAm
i am working on VC++ (visual studio2005 with sql200).i have created one stored procedure to insert data into table.
i want to call this strd procedure in the VC++ main.cpp file....
Could you please help me for the correct syntax code with example.
Thank You.
Upali
Hi there. My problem is: I have two stored procedures.
1. SELECT A FROM B
2. SELECT C FROM D WHERE A = EXEC First procedure
The meaning: First procedure gets some Id from B table. The second one gets a DataSet by this Id number. The problem is that when I getting an Id from first proc I use SELECT, than in the second one I use EXEC, and in the end, seconf procedure returns two DataSets. The first contains an Id from first procedure, second contains a valid DataSet. Therefore my application falls because it suppose that valid data in first DataSet. Hoow can I call to stored procedure from another stored procedure without creating two DataSets?
P.S. I already tried to use return instead of select in the first procedure. Same result.
Thank you
Hi,
I would like to trigger a DTS or a stored procedure from asp.net 1.1 BUT
I don't want to wait for it to finish. In fact the DTS/Storeproc calculates values into different tables.
Those values are not needed immediately. The calculation takes between 20 or 30 minutes.
Do you have any idea how to do it ?
Thanks
I have gridview display a list of users. I have added a column for a check box. If the box is checked I move the users to another table.I need to pass some parameter of or each row to a stored proc. My question. In the loop where I check if the checkbox is selected I need to call the stored procedure.Currently I do an open and closed inside the loop.What is best and most effficent method of doing this should I open and close the connection outside the loop and change the procs parameters as loop through. System.Data.SqlClient.SqlConnection conn =
new System.Data.SqlClient.SqlConnection(
System.Configuration.ConfigurationManager.ConnectionStrings["connString"].ConnectionString);
System.Data.SqlClient.SqlCommand commChk = new System.Data.SqlClient.SqlCommand("storedProc", conn);
commChk.CommandType = System.Data.CommandType.StoredProcedure;
commChk.Parameters.AddWithValue("@mUID", ddMainUser.SelectedValue.ToString());
commChk.Parameters.AddWithValue("@sUId", gvUsers.Rows[i].Cells[2].Text);
commChk.Connection.Open();
commChk.ExecuteNonQuery();
conn.Close(); If so exactly how do I do this? How do I reset the parmaters for the proc? I haven't done this before where I need to loop through passing parameter to the same proc. thanks
Hi All,
I'll admit that I'm not the greatest at stored procedure/functions but I want to learn as much as possible. So I have two questions:
1) I had VS2005 autogenerate a sqldatasource that created Select/Insert/Update stored procedures. When Updating a record and calling the stored procedure, I want to query another table (we'll call it tblBatchNo) that has only one record, Batchno. I want to put that current batchno into the Update statement and update the record with the current batchno. Can someone point me in the right direction? Remember that I'm still a beginner on this subject.
2) Can someone provide any links to online tutorials on t-sql?
Thanks in advance.
Curtis
Dear Masters;
How can I call a stored procedure with VB code?
Thanks
Hi.....I have problem and I need your helpI stored a procedure in the Projects Folder in my computerand I want to return the procedure result in a column inside tableHow I can do that?????????thank you
View 2 Replies View RelatedCan DTS make a call to a stored procedure on an AS/400 and accept data from that call. I need to access the AS/400 through OLE/DB for AS/400, execute the call to a stored procedure (the AS/400 stored procedure gets the data from DB2/400, executes some business logic, then presents the record set), and grab the record set returned and dump it into a SQL 7.0 table.
View 1 Replies View RelatedI'm using the sp_OAMethod method to call a method called "getDesc" from within a VB .dll I created. Within the .dll file, the method is called "getDesc()", but for some reason I'm getting an error saying it is an unknown name. I am able to create the object without errors, so I know the .dll is correctly registered and is being found by the server. Any idea what would cause this error when I know the method name is correct? The code I use is below (without error handling to make it shorter):
-- Decalre variables
DECLARE @object INT
DECLARE @hr INT
DECLARE @property VARCHAR(255)
DECLARE @return VARCHAR(255)
DECLARE @src VARCHAR(255)
DECLARE @desc VARCHAR(255)
-- Create object
EXEC @hr = sp_OACreate 'SQLActiveXTest.SQLActiveXTestClass', @object OUT
-- Call method
EXEC @hr = sp_OAMethod @object, 'getDesc', @return OUT
-- Destroy object
EXEC @hr = sp_OADestroy @object
Hello;
I am using an Access 2003 front-end, and an SQL backend to run my application. I have a pretty good handle on using stored procedures and assigning variables for criteria within the SPROC.
I am however having a problem when I try to use a variable in place of a named procedure. For example I have a function that runs 2 procedures, therefore I "Call" the function with the code that runs my procedure, and simply change the name of the SPROC with each call. My problem is that I cannot figure out the syntax to use a variable for the named procedure. My code always errors on the line "objConn.MySProc MyCalendar, objRs" because MySproc is of course not a named procedure.
So how do I refer to a procedures name using a variable?
Here's my code;
Function LieuBen()
MyCalendar = CurrTSCalendar
Call PopulateTmpFile("sp_DelTmpProctimesheetCalc")
Call PopulateTmpFile("sp_PopTmpCalcLieuBen")
End Function
Function PopulateTmpFile(MySProc As Variant)
Dim sp_PopulateTempOTTable As String
Const DS = "SOS-1"
Const db = "TIMS"
Const DP = "SQLOLEDB"
Dim objConn As New ADODB.Connection
Dim objRs As New ADODB.Recordset
Dim objComm As New ADODB.Command
ConnectionString = "Provider=" & DP & _
";Data Source=" & DS & _
";Initial Catalog=" & db & _
";Integrated Security=SSPI;"
' Connect to the data source.
objConn.Open ConnectionString
' Set a stored procedure
objComm.CommandText = MySProc
objComm.CommandType = adCmdStoredProc
Set objComm.ActiveConnection = objConn
objConn.MySProc MyCalendar, objRs
objConn.Close
Set objRs = Nothing
Set objConn = Nothing
Set objComm = Nothing
End Function
Hello all,
does anyone know if it's possible to call a stored procedure from a view.
Thnx,
Patrick
How to call a sql function in stored procedure using Sqlserver 2008?
View 4 Replies View RelatedI have created a DTS package which stores file data into Database table.
I want to pass file name dynamically to stored procedure from which DTS retrieve data and store it in table.
Hi.....
I have problem and I need your help
I stored a procedure in the Projects Folder in my computer
and I want to return the procedure result in a column inside table
How I can do that?????????
thank you
Hi All,I have a stored procedure.I need to create a scheduled job using that stored procedure.I went to Enterprise Manager -->Management--> Jobs-->New JobPropertiesIn the step tab, I can select db and put the codes.Instead of writing the code there, I want to call the stored procedurein the command box.How can I do that?System: MS SQL Server 2000I would highly appreciate your help.Thanks a million in advance.Best regards,mamun
View 1 Replies View RelatedHelloI am calling a stored procedure in a MSDE/SQLServer DB form within myVisual C++ 6.0 program along the linesCCommand<CAccessor<CdboMyAccessor>>::Open(m_session, NULL);WithDEFINE_COMMAND(CdboMyAccessor, _T("{ CALL dbo.MyProc; 1(?,?) }"))It all works sweet as, but it can take a while and I want to let theuser abort it.Everything I've tried ends in tears.
View 6 Replies View Related
Is it possible to call a soted procedure in view?.
If so, how to call?.
Please post syntax.
Thanks
Hi,
I would like to know how can I call a c#.net class from a stored procedure.
I have a class file which will generate a pdf file from sql reporting services and mail that file. Now I want to call this class from a stored procedure. Is it possible, if so please send me the sample code.
Thanks in advance
Regards
Babu
I have a sql2005 express database I am using in a vb2005 application. I have read a bunch and can't seem to find a clear (to me) example of how to call a stored procedure. I have a procedure that runs ok in the query builder, but don't have a clue about how to call it now that it is written. SO.
call the database MYdatabase
call the Stored procedure MYStoredproc.
Any help?
Dave
PS: it dosen't require and values passed to it, its very simple.