i have a stored procedure with one coming id parameter
ALTER PROCEDURE [dbo].[sp_1]
@session_id int
...
and a view that holds these @session_id s to be sent to the stored procedure.
how could i call this sp_1 in a select loop of the view. I mean i want to call the stored procedure as times as the view has records.
I need to improve the performance of a transaction processing SSIS package we've developed.
The package reads messages from an MSMQ queue, which contains a transaction to be processed, and executes another package within a For Loop container. The loop continues until all messages ransactions have been processed from the queue.
I've noticed that the For Loop will not iterate and process the next message ransaction until the called package completes for the previous message ransaction. Is there any way to run this secondary package asynchronously so that the For Loop does not wait for it to complete execution? I've tried setting the ExecuteOutOfProcess property on this secondary package to True, but found the same behavior as when the property was False. In fact, it appeared to take longer to process (probably due to the overhead of creating another process).
Is it possible to call a stored procedure inside a select statement: I tried this , but is giving error "Incorrect syntax near the keyword 'execute'."
"
SELECT PC.ProductId
FROM ProductCategories PC
WHERE PC.CategoryID in ( execute get_category_hierarchies 1 )
"
where get_category_hierarchies is the stored procedure which expects an integer parameter.
I am having trouble with this statement. I am returning multiple rows because I am doing the select statement within the loop. I need to keep the loop somehow because of the where clause of the select statement:
'AND @start not in (select sh_istart from casemas where sh_istart in (select sh_istop from casemas where sh_serial in (53565,53588,53597)))
and @start between sh_istart and sh_istop'
Is there anyway that I can maintain the ability to use the loop but not do mutiple select statements like below:
Also I'm trying really hard not to use temp tables in this example
Result from select statement below
sh_serial
-----------
53565
53597
sh_serial
-----------
53565
53597
sh_serial
-----------
sh_serial
-----------
53588
53597
Desired results:
sh_serial
-----------
53588
53597
53565
Syntax:
declare @start int
select @start = 580
declare @stop int
select @stop = 900
while @start <= @stop
begin
select sh_serial,
from casemas, schilin
WHERE (schi_shser = sh_serial)
and (schi_itemno = '004852')
and (sh_serial <> 600000)
and sh_serial in (53565,53588,53597)
and sh_serial in
(select distinct sh_serial
from casemas, schilin
WHERE (schi_shser = sh_serial)
and (schi_itemno = '004852')
and sh_serial in (53565,53588,53597)
AND @start not in (select sh_istart from casemas where sh_istart in (select sh_istop from casemas where sh_serial in (53565,53588,53597)))
and @start between sh_istart and sh_istop
group by sh_serial
having (sum(schi_qty) + 1 < 4 ))
select @start = @start + 1
end
I'd appreciate any help. Thanks! :o
What I wanted to do is I want to loop through each select result and at the same time use the result to do something while in a loop.
While (select field1,field2,field3 from table 1)
BEGIN
select count(*) as field4 from table1 where field1(current_record)>3
update table1 set field2(current_record)=field4
END
something like that...How do I do this?
Hi,
I want to create an select query and loop it thru , process couple things like finding maximum,count values
for every row...
it is easy to do it with sprocs , I can open couple cursors and do it but How can I do it SSIS transformations?
thanks,
J
I am trying to call a stored procedure inside a SQL SELECT statement. Has anybody had to do this in the past? I have a SELECT statement in a Microsoft Access database and I need that SELECT statement to call the stored procedure in the SQL server. Any help would be appreciated
View 4 Replies View RelatedHi everyone, not sure if a this topic has been covered yet (a have been looking all day), but as I am still very new to this, my problem is as follows:
In the Try .. Catch block below, data is posted from a form and the SqlCommand.ExecuteScalar() statement returns a Unique Job ID.
I am attempting to populate a subordinate table for qualifications which are selected from a ListBox, but rather than using qualification titles, I am using the values.
My problem is that only one value (the first) gets posted multiple times, when multiple values are selected.
Looking at the For Each loop in the inner Try Catch block, I am wondering whether there is some sort of Index pointer that needs to be incremented, in order to establish new values further down the list.
I have seen no evidence that this is the case, save for the fact that the value stalls on just the first.
Any help would be appreciated.
===== CODE ===
Try
C4LConnection.Open()
JobPostingID = SqlJobPost.ExecuteScalar()Response.Write("<br />Selected Item: " & Qualifications.SelectedItem.Value)
Try
' Multiple Qualification EntriesSqlQualPost.Parameters.Add(New SqlParameter("@JobPostingID", SqlDbType.Int))
SqlQualPost.Parameters("@JobPostingID").Value = Int32.Parse(JobPostingID)SqlQualPost.Parameters.Add(New SqlParameter("@QualificationID", SqlDbType.Int))
SqlQualPost.Parameters("@QualificationID").Value = Int32.Parse(Qualifications.SelectedItem.Value)
If Qualifications.SelectedIndex > -1 ThenFor Each Item In Qualifications.Items
If Item.Selected ThenResponse.Write("<br />SelectedItem Value: " & Qualifications.SelectedItem.Text)
QualPostingID = SqlQualPost.ExecuteScalar()SqlQualPost.Parameters("@QualificationID").Value = Int32.Parse(Qualifications.SelectedItem.Value)
Response.Write("<br />Selected Item: " & Qualifications.SelectedItem.Value)
End If
Next
End IfCatch Exp As SqlException
failJobPost = True
lblError.Visible = TruelblError.Text = "Could not add qualifications <br />" & Exp.Message
End Try
failJobPost = FalseCatch Exp As SqlException
failJobPost = True
lblError.Visible = TruelblError.Text = "Error: could not post job to database <br />" & Exp.Message
Finally
C4LConnection.Close()
End Try
Hello All,
Below is a simple Select statement performing a Lookup into a SQL database and returning the columns (associated with the Row) in to Cells on an eForm. The issue I have is there are 42 rows (which go up and down) and do not feel like writing 42 select statements.
select RiskDescriptor, RiskImpactLowDescriptor, RiskImpactMediumDescriptor, RiskImpactHighDescriptor
from [Risk Descriptors]
where [RiskDescriptor ID] in (1)
order by [RiskDescriptor ID];
<<1@Cell104>>
<<2@Cell105>>
<<3@Cell106>>
<<4@Cell107>>
I would like to add a loop, adding 1 to the RiskDescriptor ID and 4 to the Cells. So on second pass in the loop:
RiskDescriptor ID = 2
<<1@Cell108>>
<<2@Cell109>>
<<3@Cell110>>
<<4@Cell111>>
Third pass in the loop:
RiskDescriptor ID = 3
<<1@Cell112>>
<<2@Cell113>>
<<3@Cell114>>
<<4@Cell115>>
and so on.
The Until portion of the loop can be hardcode (42 in this example) but would rather use an EOL or Query the DB for the total number of RiskDescriptor ID. This way when the DB changes (ID's go up or down) the SQL Statement does not need to be notified.
It is a JDBC call from within the eForm.
I would appreciate any help on how to format a loop in a SQL Statement
I have two tables that I wish to return values for and populate a text file with the returned values. This part works well, however, I get strange values when I rung the Select statement against both tables.
For example, if I run this statement:
Select count(page_count), sum(Page_count) from Contracts
this will return the values I expect
If I were to add another table to this query then things go crazy. For instance, if I took the same query and added the Maps table to it as such:
Select count(page_count), sum(Page_count) from Contracts, Maps
I get crazy numbers that are many times more then the actual numbers
My goal is to get the page count, number of records for Contracts and number of records from Maps all in one query
I use a database that has user names stored in Encrypted format usingthe following API.Declare Sub Encrypt2 Lib "QPRO32.DLL" (ByVal Work As String, ByValPASSWORD As String)Every time i require the user name i have to again decrypt the nameusing the same function.My problem is that when i fetch a large number of records i have toloop through every record and call the encrypt function for eachrecord.Instead of binding the recordset to my control i need to loopthrough and fill my controlA MSHFlexGrid in Vb6.0.Is there a way out to this problem that will make my record populatiogfaster withoutout changing the current Encrypted users.Thanx in Advance
View 2 Replies View RelatedHi!I have a scalar function that returns integer:xview (int)Now, I'm trying to build a procedure that has the following selectinside:select atr1, xview(atr2)from tablenameBut, I get the 'Invalid name' error when I try to execute thatprocedure.If I got it right, I must use user.fn_name() syntax, but I cannot usedbo.xview() inside my procedure since it means xview will always beexecuted as dbo, which is unaccaptable.I'm a bit confused, so any hint is very welcomed.Thanks!Mario.
View 4 Replies View Relatedhi,
Below are 2 oracle commands
1. (calls an oracle package) - call lpaarchive.pibrdg.setlastbridgeruntime(sysdate);
2. (selects rows) - select timestamp ,
pitag ,
rtlmp from LPAARCHIVE.I_PIBRDG_BUS5MINRTLMPS
where timestamp <= (sysdate + 0.002777778)
order by TIMESTAMP ASC;
I need to execute these 2 statements together. I tried using Execute SQL task to call the package and then an OLEDB source that calls a variable with the select statement. But it does not retrieve any rows. It seems like the result of calling the package is used by the select statement to give the final rows. Could anyone please help me resolve this issue.
Can I safely use top n select/delete in a while loop? For example:
declare @FieldVal int
while (select count(*) from @MyTempTable) > 0
begin
select top 1 @FieldVal = FieldVal from @MyTempTable
-- process @FieldVal then delete the row
delete top 1 from @MyTempTable
end
I like the simplicity of the above approach as long as it's reliable and there aren't any gotchas that I may not be aware of.
How Do I fix View(below) or Multi-Table select(below) to use this Function to return distinct rows via qcParent_ID?
Following Function populates a field (with concat list of related titles) with other required fields:
Create Function [dbo].openItemsIntoList(@Delimeter varchar(15),@qcparent_ID varchar(1000))
Returns Varchar(8000) as
Begin
Declare @Lists as varchar(8000);
Select @Lists = '';
Select @Lists = @Lists + itemTitle + @Delimeter From z_QClocate_openAll_Qualifier
Where @qcParent_ID = qcParent_ID;
Return Substring(@Lists,1,len(@Lists)-len(@Delimeter));
End
works perfect against single table select (returning 54 distinct rows by qcParent_ID):
Select a.qcParent_ID, a.Facility, a.Modality, openItemListToFix
From dbo.a2_qcEntryForm a
JOIN (Select DISTINCT qcParent_ID, dbo.openItemsIntoList(' / AND ',qcParent_ID) as openItemListToFix FROM dbo.a3_qcItems2Fix) i
on a.qcParent_ID = i.qcParent_ID
But data is needed from 3 tables...
- Created a VIEW that returns all (82) rows (negating distinct of the function on qcParent_ID)
- Failed Miserably Integrating Function call into a multi-table select (inexperienced with complex joins)
This VIEW returns ALL (82) rows in table:
CREATE VIEW z_QClocate_openAll AS
SELECT dbo.a1_qcParent.qcStatus, dbo.a1_qcParent.qcAlert, dbo.a3_qcItems2Fix.qcParent_ID, dbo.a3_qcItems2Fix.qcEntryForm_ID,
dbo.a3_qcItems2Fix.itemComplete, dbo.a3_qcItems2Fix.itemTitle, dbo.a2_qcEntryForm.Facility, dbo.a2_qcEntryForm.Modality
FROM dbo.a1_qcParent INNER JOIN
dbo.a2_qcEntryForm ON dbo.a1_qcParent.qcParent_ID = dbo.a2_qcEntryForm.qcParent_ID INNER JOIN
dbo.a3_qcItems2Fix ON dbo.a2_qcEntryForm.qcEntryForm_ID = dbo.a3_qcItems2Fix.qcEntryForm_ID AND
dbo.a1_qcParent.qcParent_ID = dbo.a3_qcItems2Fix.qcParent_ID
WHERE (dbo.a1_qcParent.qcStatus = 'Awaiting Attn') AND (dbo.a3_qcItems2Fix.itemComplete = 0) OR
(dbo.a1_qcParent.qcStatus = 'In Process') OR
(dbo.a1_qcParent.qcStatus = 'Re-Opened')
Calling like this returns ALL 82 rows (negating the functions distinct):
Select a.qcParent_ID, a.qcStatus, a.qcAlert, a.itemComplete, a.Facility, a.Modality, openItemListToFix
From z_QClocate_openAll a
JOIN (Select DISTINCT qcParent_ID, dbo.openItemsIntoList(' / AND ',qcParent_ID) as openItemListToFix FROM dbo.a3_qcItems2Fix) i
on a.qcParent_ID = i.qcParent_ID
AND THEN THERES...
Failing miserably on Integrating the Function call into This SELECT ON MULTI-TABLES:
How to integrate the Function call:
JOIN (Select DISTINCT qcParent_ID, dbo.openItemsIntoList(' / AND ',qcParent_ID) as openItemListToFix FROM dbo.a3_qcItems2Fix) i
on a.qcParent_ID = i.qcParent_ID
into the multi-table Select relationships (while maintaining Where & Order By):
SELECT dbo.a1_qcParent.qcStatus, dbo.a1_qcParent.qcAlert, dbo.a3_qcItems2Fix.qcParent_ID, dbo.a3_qcItems2Fix.qcEntryForm_ID,
dbo.a3_qcItems2Fix.itemComplete, dbo.a3_qcItems2Fix.itemTitle, dbo.a2_qcEntryForm.Facility, dbo.a2_qcEntryForm.Modality
FROM dbo.a1_qcParent INNER JOIN
dbo.a2_qcEntryForm ON dbo.a1_qcParent.qcParent_ID = dbo.a2_qcEntryForm.qcParent_ID INNER JOIN
dbo.a3_qcItems2Fix ON dbo.a2_qcEntryForm.qcEntryForm_ID = dbo.a3_qcItems2Fix.qcEntryForm_ID AND
dbo.a1_qcParent.qcParent_ID = dbo.a3_qcItems2Fix.qcParent_ID
WHERE (dbo.a1_qcParent.qcStatus = 'Awaiting Attn') AND (dbo.a3_qcItems2Fix.itemComplete = 0) OR
(dbo.a1_qcParent.qcStatus = 'In Process') OR
(dbo.a1_qcParent.qcStatus = 'Re-Opened')
What I'm trying to do is this;
I have a table with Year , Account and Amount as fields. I want to
SELECT Year, Account, sum(Amount) AS Amt
FROM GLTable
WHERE Year <= varYear
varYear being a variable which is each year from a query
SELECT Distinct Year FROM GLTable
My thought was that I would need to pass a variable into a select statement which then would be used as the source in my Data Flow Task.
What I have done is to defined two variables as follows
Name: varYear (this will hold the year)
Scope: Package
Data type: String
Name:vSQL (This will hold a SQL statement using the varYear)
Scope: Package
Data type: String
Value: "SELECT Year, Account, sum(Amount) AS Amount FROM GLTable WHERE Year <=" + @[User::varYear]
I've created a SQL Task as follows
Result set: Full Result Set
Connection Type: OLE DB
SQL Statement: SELECT DISTINCT Year FROM GLTable
Result Name: 0
Variable Name: User::varYear
Next I created a For Each Loop container with the following parameters
Enumerator: Foreach ADO Enumerator
ADO Object source Variable: User::varYear
Enumeration Mode: Rows in First Table
I then created a Data Flow Task in the Foreach Loop Container and as the source used OLE DB Source as follows
Data Access Mode: SQL Command from Variable
Variable Name: User::varYear
However this returns a couple of errors "Statement(s) could not be prepared."
and "Incorrect syntax near '='.".
I'm not sure what is wrong or if this is the right way to accomplish what I am trying to do. I got this from another thread "Passing Variables" started 15 Nov 2005.
Any help would be most appreciated.
Regards,
Bill
Hi,
I am a newbie in SSIS.
Can anybody please help me in the following.
Here is the task that I want to achieve:
1. continously poll a db table every 1 minute,
if the value of a paticular cell in the table has changed since last poll,
then initiate the second task
2. do a select query that picks about 10,000 new rows off another db table,
the 10,000 rows should then be stored in a in-memory dataset.
Every time the poll initiates a new select query, it should insert the new rows to the existing in-memory dataset.
thus if the select runs for 2 times in 2 minutes, the the in-memory dataset would contain a maximum of 20,000 rows.
3. Then I want to apply a set of transformations on the dataset and then finally update some db tables, push some records to the ssas database. (push mode incremental processing)
which sub tasks can be achieved and which cannot.
if not, Is there a workaround?
Please do provide some specific links that accomplish some of these similar tasks.
I have tested some functionality, like
doing a full processing of a ssas database.
reading from a database table and inserting into a flat file.
I tired to use the ExecuteSQLTask, and i also assigned the resultant to an user:variable. the execution completed succesfully but I am not able to see the value of the variable change. also I am not able to use the variable to figure out a change in previous value and thus initiate a sql select. or use the variable to do anything.
Regards
Vijay R
difference between FOR LOOP and FOREACH LOOP with example(if possible) in SSIS.
View 4 Replies View RelatedI have a table with RowID(identity). I need to loop though the table using RowID(not using a cursor). Please help me.
Thanks
Hi all,
I have 2 sets of sql code in my SQL Server Management Stidio Express (SSMSE):
(1) /////--spTopSixAnalytes.sql--///
USE ssmsExpressDB
GO
CREATE Procedure [dbo].[spTopSixAnalytes]
AS
SET ROWCOUNT 6
SELECT Labtests.Result AS TopSixAnalytes, LabTests.Unit, LabTests.AnalyteName
FROM LabTests
ORDER BY LabTests.Result DESC
GO
(2) /////--spTopSixAnalytesEXEC.sql--//////////////
USE ssmsExpressDB
GO
EXEC spTopSixAnalytes
GO
I executed them and got the following results in SSMSE:
TopSixAnalytes Unit AnalyteName
1 222.10 ug/Kg Acetone
2 220.30 ug/Kg Acetone
3 211.90 ug/Kg Acetone
4 140.30 ug/L Acetone
5 120.70 ug/L Acetone
6 90.70 ug/L Acetone
/////////////////////////////////////////////////////////////////////////////////////////////
Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming:
//////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
sqlDataAdapter.SelectCommand.Command.Type = CommandType.StoredProcedure
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class
///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors:
Error #1: Type 'SqlConnection' is not defined (in Form1.vb)
Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb)
Error #3: Array bounds cannot appear in type specifiers (in Form1.vb)
Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance,
Scott Chang
More Information for you to know:
I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly.
I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
I have a foreach loop that is supposed to loop through a recordset, however it doesn't loop. It just repeats the same row, row after row.
I would like to look into the recordset variable but I can't because it is a COM object and the ADODB namespace is not available in the script task.
Any solution to this? anyone experienced anything similar
I have a table called Tbltimes in an access database that consists of the following fields:
empnum, empname, Tin, Tout, Thrs
what I would like to do is populate a grid view the a select statement that does the following.
display each empname and empnum in a gridview returning only unique values. this part is easy enough. in addition to these values i would also like to count up all the Thrs for each empname and display that sum in the gridview as well. Below is a little better picture of what I€™m trying to accomplish.
Tbltimes
|empnum | empname | Tin | Tout | Thrs |
| 1 | john | 2:00PM | 3:00PM |1hr |
| 1 | john | 2:00PM | 3:00PM | 1hr |
| 2 | joe | 1:00PM | 6:00PM | 5hr |
GridView1
| 1 | John | 2hrs |
| 2 | Joe | 5hrs |
im using VWD 2005 for this project and im at a loss as to how to accomplish these results. if someone could just point me in the right direction i could find some material and do the reading.
I have source and destination table names in the database(one table) and I need to read the source and destination tables one by one...
My Lookp table is like the following...
Srn srctable desttable
1 SRC1 DEST1
2 SRC2 DEST2
3 SRC3 DEST3
Now I want one package to load from source to destination.. how do I do it.. I dont know how to use....
How do I run the pacakge for each of the rows... ..............................
Hi all, i have a DTS package that i call from a C# app, i had it working great until i decided to use an activeX script to do the data transformations instead of the row copy. I need to use ActiveX to add a standard name to the last column in the destination table. the problem is the task is executing without errors (from c#) but nothing is happening, its failing silently. If i modify the Data Transformation back to a standard column mapping (with separate DTSTransformations for each column) it works fine, but as soon as i use activeX to handle the transformations it doesn't work. Can anyone tell me what i may be doing wrong. heres the calling code from C# if(f.Name.Substring(13,7).ToLower() == "product")
{
try
{
activity.Log("Starting Product DTS Package...");
DTS.Package2Class package = new DTS.Package2Class();
object pVarPersistStgOfHost = null;
package.LoadFromSQLServer(
"192.168.8.8",
"username",
"thepassword",
Microsoft.SqlServer.DTSPkg80.DTSSQLServerStorageFlags.DTSSQLStgFlag_Default,
null,
null,
null,
(string)ConfigurationSettings.AppSettings["productDTSPackage"],
ref pVarPersistStgOfHost);
package.GlobalVariables.Item(1).Value = f.FullName.ToString();
package.Execute();
package.UnInitialize();
//force release of COM object
System.Runtime.InteropServices.Marshal.ReleaseComObject(package);
package = null;
}
catch(Exception e)
{
activity.Log(string.Format("Failureprocessing {0}",WorkingPath + f.Name) +" - "+ e.Message);
} and the activex i tried to use for the transformations is: '**********************************************************************' Visual Basic Transformation Script'************************************************************************' Copy each source column to the destination columnFunction Main() DTSDestination("Yesmail Id") = DTSSource("product series") DTSDestination("Customer CKM CustId") = DTSSource("product family") DTSDestination("Product SKU") = DTSSource("transaction date") DTSDestination("product model name") = DTSSource("serial number") DTSDestination("serial number") = DTSSource("product model name") DTSDestination("transaction date") = DTSSource("Product SKU") DTSDestination("product family") = DTSSource("Customer CKM CustId") DTSDestination("product series") = DTSSource("Yesmail Id") DTSDestination("fileName") = DTSGlobalVariables("sourceFile").Value <-- this is why im using the activex for this field to get a Global Variable. Main = DTSTransformStat_OKEnd Functionthe weird thing is the PACKAGE runs fine from ENTERPRISE MANAGER with this activex, it just doesn't do it from my Calling app, perhaps i have missed something i need to change in the package constructor? BTW: i do have my assembly signed in C# for the COM wrapper.thanks in advance, mcm
Hello,
I have done extensive work with Classic ASP for 9 years now. Working with Stored Proceedures etc
However now am working in c# am adviced by a friend that its best to use the
1. The "Object data source" to call SP
2. Are there any documentations pointers on best practices, how its done ?
I want to use the "on click event" in my class file.
thanks
Ehi
Hello,
are there any sample codes that show you how to execute a SP in .net
1. Using a class
2. Calling the class in the onlick_button function ?
thanks
Ehi
I'm developing a new Stored Proc that will be taking information in to enter customer and order info. Looking at the current Stored Proc its using alot of If statements and I'm thinking of breaking the sp up into different Stored Procs and calling them all from One main stored proc. I know how to do this but I was wondering how it would effect performance. So should I simply keep all the stuff in one proc or module it out into multiple ones to make it easier to follow and read?
Thanks
Does anyone have an example of a Stored Procedure calling
another stored procedure and passing it parms.
What I would like to do is: Have a stored procedure select
data from a table and pass that data to another stored
procedure.
Thanks in advance,
Rodney
Hi,
Can I call SP in the Trigger? Googled for this but din gt any satisfactory answer.
Thnkx,
Rahul Jha
I'm working in SQL Server 2005. I have an existing SP that does exactly what I need (it's the aspnet_UsersInRoles_IsUserInRole SP). I want to reuse this SP and use it's return value as a field in the SP I'm writing. How do I go about doing this? I could take the logic out of the called SP and wrap it in a function; but, I would really like to reuse the SP aspnet_UsersInRoles_IsUserInRole. Thanks in advance for any assistance.
View 7 Replies View Relatedhi,
i'm trying to call a dts package from vb.net.
i got 2 examples which both don't work.
first one gives me a [DBNETLIB][ConnectionOpen(Connect()).]SQL Server does not exist or access denied error.
source code:Dim serverName As String = "SERVERNAME"Dim oPackage As New DTS.Package()Dim oStep As DTS.StepDim pVarPersistStgOfHost As Object = Nothing
oPackage.LoadFromSQLServer(serverName, "USERID", "PASSWORD", DTSSQLServerStorageFlags.DTSSQLStgFlag_Default, _ "DTSPASSWORD", Nothing, Nothing, "DTSPACKAGENAME", pVarPersistStgOfHost)
For Each oStep In oPackage.Steps oStep.ExecuteInMainThread = TrueNext
oPackage.Execute()
Dim err As LongDim source, description, message As StringFor Each oStep In oPackage.StepsIf oStep.ExecutionResult = DTSStepExecResult.DTSStepExecResult_Failure Then oStep.GetExecutionErrorInfo(err, source, description) message = String.Format("ErrorCode: {0}, Source: {1}, Description: {2}", err.ToString(), source, description)Else message = "Success"End IfNext
oPackage.UnInitialize()oPackage = Nothing
second example tries to create a dts package dynamically. this time i get the error that the CustomTask can not be casted, somehting about the QueryInterface.
source code:Dim oPackage As New Package2()Dim oConnection As Connection2Dim oStep As Step2Dim oTask As TaskDim oCustomTask As BulkInsertTask
oConnection = oPackage.Connections.[New]("SQLOLEDB")oStep = oPackage.Steps.[New]()oTask = oPackage.Tasks.[New]("DTSBulkInsertTask")oCustomTask = CType(oTask.CustomTask, BulkInsertTask) <-- error
With oConnection .Catalog = "CATALOG" .DataSource = "SERVERNAME" .ID = 1 .UseTrustedConnection = True .UserID = "USERID" .Password = "PASSWORD"End With
oPackage.Connections.Add(oConnection)oConnection = Nothing
With oStep .Name = "InsertGemal" .ExecuteInMainThread = TrueEnd With
With oCustomTask .Name = "InsertGemal" .DataFile = "D:ImportGemal.dat" .ConnectionID = 1 .DestinationTableName = "Gemal" .FieldTerminator = ";" .RowTerminator = "
"End With
oStep.TaskName = oCustomTask.Name
With oPackage .Steps.Add(oStep) .Tasks.Add(oTask) .FailOnError = TrueEnd With
oPackage.Execute()
oPackage.UnInitialize()oPackage = Nothing
any help highly appreciated!
t.i.a.,ratjetoes.
Hello,
I am trying to call a SQL Function in C#, as I want to get the value binded back to the column in a datagrid.
Any answers will be appreciated ...............Urgent.
:)
Hello,
I have the class below. And trying to execute it on a button click event.
What am i doing wrong ?
Thanks
Here is the button click event1 protected void Button1_Click(object sender, EventArgs e)
2 {
3 signup_data_entry signup = new signup_data_entry();
4 signup.signup_data_entry();
5
6 }
Here is my class file. please advice
1 public class signup_data_entry
2 {
3 public signup_data_entry()
4 {
5 //SqlConnection con = new SqlConnection("cellulant_ConnectionString");
6 SqlConnection con = new SqlConnection(ConfigurationManager.AppSettings["cellulant_ConnectionString"]);
7
8 SqlCommand command = new SqlCommand("Cellulant_Users_registration", con);
9 command.CommandType = CommandType.StoredProcedure;
10
11 con.Open();
12
13 //string IP = new string();
14
15
16 command.Parameters.Add(new SqlParameter("@RegionID", SqlDbType.Int, 0, "RegionID"));
17 command.Parameters.Add(new SqlParameter("@RegionDescription", SqlDbType.NChar, 50, "RegionDescription"));
18
19 command.Parameters[0].Value = 4;
20 command.Parameters[1].Value = "SouthEast";
21
22 int i = command.ExecuteNonQuery();
23
24
25 }
26 }