All, I am developing the data mart refresh task in SSIS. I wanted to call the package in command prompt. I need help. Can any one give any tips on it. Thanks and appricate in advance.
Regards
Govind
How to execute ssis package from command prompt and also pass configuration file to it and set logging to ssis log provider for sql server. Writing all those options with cmd.
View 3 Replies View RelatedI have an SSIS package that runs fine through command pormpt although when I try to run it from a SQL Servr Agent Job CmdExec step it bombs out. Please help this has me stumped...the SSIS package uses an XML connection string so certain key settings such as connection strings and email info can be changed easily. Currently this is all on the same machine. I have not moved it beyond where I am developing.
On the command line I am using the following command...
dtexec /F "S:connectionscontacts.dtsConfig" /DE "password"
Below is the output log...
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 6:59:40 PM
Progress: 2006-08-16 18:59:41.29
Source: Data Flow Task
Validating: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.29
Source: Data Flow Task
Validating: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.71
Source: Data Flow Task
Validating: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.73
Source: Data Flow Task
Validating: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.81
Source: Data Flow Task
Pre-Execute: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.84
Source: Data Flow Task
Pre-Execute: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.90
Source: Data Flow Task
Pre-Execute: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.90
Source: Data Flow Task
Pre-Execute: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Cleanup: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.93
Source: Data Flow Task
Cleanup: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.93
Source: Data Flow Task
Cleanup: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.93
Source: Data Flow Task
Cleanup: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.95
Source: Send Mail Task
The SendMail task is initiated.: 0% complete
End Progress
Progress: 2006-08-16 18:59:42.09
Source: Send Mail Task
The SendMail task is completed.: 100% complete
End Progress
DTExec: The package execution returned DTSER_SUCCESS (0).
Started: 6:59:40 PM
Finished: 6:59:42 PM
Elapsed: 1.984 seconds
When I try to use the same command within SQL Server Agent Job using a CmdExec step I get the following error...
Description: The package is attempting to configure from the XML file "S:connectionscontacts.dtsConfig". End Info Warning: 2006-08-16 18:40:03.15 Code: 0x80012012 Source: contactsPackage Description: The configuration file name "S:connectionscontacts.dtsConfig" is not valid. Check the configuration file name. End Warning Warning: 2006-08-16 18:40:03.15 Code: 0x80012059 Source: contactsPackage Description: Failed to load at least one of the configuration entries for the package. Check configurations entries and previous warnings to see descriptions of which configuration failed. End Warning Info: 2006-08-16 18:40:03.20 ... Process Exit Code 1. The step failed.
Thanks in advance for any help!!!
hi,
Below are 2 oracle commands
1. (calls an oracle package) - call lpaarchive.pibrdg.setlastbridgeruntime(sysdate);
2. (selects rows) - select timestamp ,
pitag ,
rtlmp from LPAARCHIVE.I_PIBRDG_BUS5MINRTLMPS
where timestamp <= (sysdate + 0.002777778)
order by TIMESTAMP ASC;
I need to execute these 2 statements together. I tried using Execute SQL task to call the package and then an OLEDB source that calls a variable with the select statement. But it does not retrieve any rows. It seems like the result of calling the package is used by the select statement to give the final rows. Could anyone please help me resolve this issue.
A strange thing is happening to us: we create a bat file that executes an SSIS package with multiple connection managers and tasks.
When calling the bat file from command prompt €“ the package runs just fine!
When calling the same bat file from SQL Server Agent (that runs under the same NT account as SSIS, and all other SQL services, and belongs to local Adminstrators), the package fails half way through with connection failed issue.
Plus it gives us something like this: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER
Has anyone ever experienced this issue, do you have any possible solutions?
Thank you!
Anastasia
I have created ssis package. It has been successfully running at UI level.
But when i am trying to execute it from the command prompt by using dtexec utility it is showing the following error messages.
Error: 2005-12-23 17:01:57.67
Code: 0xC00470FE
Source: Data Flow Task DTS.Pipeline
Description: The product level is insufficient for component "Flat File Source" (1).
End Error
Error: 2005-12-23 17:01:57.67
Code: 0xC00470FE
Source: Data Flow Task DTS.Pipeline
Description: The product level is insufficient for component "Script Component" (9).
End Error
i have entered the command as follows.
dtexec /f "c:somefolderpackage1.dtsx"
Any points regarding this issue would be helpful.
I have a SSIS job, one of the last steps it performs is to execute a SQL 2000 DTS package. This has to be done as a SQL 2000 DTS package as it is performing rebuilds of SQL 2000 Analysis Services dimensions and cubes. We've found that when the DTS fails the SSIS job is happily completing showing as a success, we would prefer to know it went wrong.
As far as I'm aware SSIS merely starts the DTS off and doesn't care about it's result. I've taken a look in to turning on the logging for the execute DTS package and thought that the ExecuteDTS80PackageTaskTaskResult would give me the answer I need...but is merely written to the log not available as an event-handler. It also looks like it is not safe to put a SQL task in as the next item to go look at the SQL 2000 system tables to look at the log for the DTS package as the SSIS documentation warns that the DTS package can continue to run after the execute DTS package task has ended.
Ideally I want any error raised within the DTS package to cascade up to be an error in the SSIS job, I can then handle it appropriately. I cannot find a way to do this. Is there a way?
If not, can anyone suggest how in the remainder of the SSIS tasks I can be sure that the DTS has completed before I start any other tasks that will check for the SQL 2000 log of its execution?
I have an SSIS package (TransAgentMaster) that I recently modified to include a call to a child package via the file system. The child package creates a text file. When I run the package in dev studio then the child package/text file is produced.
I then imported the TransAgentMaster as a stored packagesfilesystem package into SQL SSIS and executed the package. The child package produced the text file.
I then ran the SQL Server Agent to see if the child package would work and it did not generate the text file. Thus after updating a SSIS package importing the package into SSIS the job that calls the package will not call the child package. Please not that the TransAgentMaster package calls 7 children packages €¦ just not my new one.
Any thoughts why the agent will not run the child newly crated childe package?
Hi There,
I need to call a function to calculate a value. This function accepts a varchar parameter and returns a boolean value. I need to call this function for each row in the dataflow task. I thought I would use an oledb command transformation and for some reason if I say..
'select functioname(?)' as the sqlcommand, it gives me an error message at the design time. In the input/output properties, I have mapped Param_0(external column) to an input column.
I get this erro.."syntax error, ermission violation or other non specific error". Can somebiody please suggest me what's wrong with this and how should I deal this.
Thanks a lot!!
Our project is on SSIS 2012 and we are using the project deployment model. We have parameter the connection managers, created environments, environment variables and configured the references. Hence, when we deploy the solution to higher environments, the connection strings are picked from the environments and not the ones stored in the connection manager.
However, we face issues when in development environment, we need to run the same package but by entering the values manually in the connection manager. Even though the connection details are correct, when we execute the package from Visual Studio, SSIS is not able to connect to the database. Is there any way to have SSIS prompt for the connection details after we have click on "Execute Task" or "Start" from Visual Studio?Â
Hello All
I have tried to execute SSIS Package using,
Using a Web Service or Remote Component to Run a Remote Package Programmaticallyas per following msdn example.
http://msdn2.microsoft.com/en-us/library/ms403355.aspx
my SSIS .dtsx file is on the Server having SQL Server & SSIS Installed. (Database Server)
and asp.net web service & web application is on another server, which is Application Server.
the .dtsx does simple process like executing existing Sql view from Database Server to the .csv file on the Application Server.
when I implemented the Code explained in msdn its works fine from my development machine.
but as soon as i tried to execute from running from the website, it gives following error.
The following exception occurred: Retrieving the COM class factory for component with CLSID {E44847F1-FD8C-4251-B5DA-B04BB22E236E} failed due to the following error: 80040154.
I am sure this forums must have been answered already for the this kind of problem.
If anyone can guide me for the above problem, ASAP pls.
thanks
We had a scenario where we used to run the Process from front end thru application. on the back ground the the process call the SP & from there it calls the SSIS package then again to SP.
after SSIS package ran succesfully it will be updated on a table with sucess then call the SP & deletes the entry from the other table but in one scenario Package was success but the entry was not getting deleted as the process takes almost 2-3 hours loading 60 millions records. but the process was running in SQL 2008 but once we upgraded to SQL 2012 its not working for one application. its not returning any error as timeout also. we tried changing the server level setting for remote query time out also to 0 but no luck .
I am using the following code to run my SSIS package:
Package package = app.LoadFromSqlServer
("\EPSROI\dts_Client_Eligibility_Import", "SQL32", "username",
"password", null);
Variables vars = package.Variables;
vars["InputFile"].Value = txtInput.Text;
vars["OutputFile"].Value = txtOutput.Text;
vars["Client"].Value = cboClientName.SelectedValue.ToString();
vars["Chopper"].Value = Chopper;
DTSExecResult result = package.Execute();
It runs fine on my machine; however, on anyone elses machine "result" comes back as "failure". We have figured out that it is loading the package and variables fine but failing before the first step of the package. Does anyone know why this would be? Or how to fix it? I am totally stumped considering it works fine on my machine.
Thanks.
Danielle
Hello
I have a SSIS-Package stored in the SQL Server. This package works fine when i execute it from the SQL Server. But if I try to execute the package from a COM+-Application, nothing happens.
Here is my code snipped:
Public Function ExecutePackage €¦
Dim myPackage As New Package
Dim app As New Application
Dim pkgResults As DTSExecResult
'----- Execute the package from SQL Server
myPackage = app.LoadFromSqlServer("\PackageName", "ServerInstance", Nothing, Nothing, Nothing)
pkgResults = myPackage.Execute()
€¦
End Function
In a Windows Forms Application I can execute the package with this code snipped succesfully. Therefor I think that the problem is my COM+-Application.
Can anybody help me?
Thank's
Jürgen Paulus
Can you call a SSIS package from Web services?
I would like to create a web services that can call a SSIS package ( generate a text file)..
If it is possible, Can someone show me code examples?
Hi All,
I'm trying to call a SSIS package as my data source for SQL reporting service but I keep getting the error "Cannot create a connection to data source 'DsSSIS'.
My DsSSIS consists of the following in the connection string.
="/file c:FarmBillTesting.dtsx /Set Package.Variables[User::FilterValue].Properties[Value];" & Parameters!FilterValue.Value.ToString()
I have tried everything that I know to make this work but I have been unable to do so. Any help from the group would be great.
Thanks
Ham
Hi,
I was looking at a previos thread in this very queston and the answers given to it, I tried a SSIS package that works fine on its own but on creating a new job and invoke it, the JOB fails ,it says its not able to locate the file specified,
I tried copying the package to the server machine wher am creating the job,but again the same error; and when i try to alter the protection level of the SSIS package to Server Storage its throwing an error like '' This protection level cant be applied to this destination,The system can't verify that the destination supports storage capacity. this error occurs when saving to XML."
I am using OLE DB Destination in the dataflow task of the SSIS package I ve created. Please guide whr am going wrong. Some detailed steps which has some screenshots depicting step by step procedure of creating a JOB that calls a SSIS package will be highly helpful
Thanks in Advance,
I have written package which goes through a directory and load all the files with certain criteria. I have set the package to run using package configuration. It does work fine.
View 4 Replies View Relatedhi,
when calling an SSIS package from a trigger causes it to run for ever. Know why??
In Detail;
Consider that there are two tables with the same schema in a db. Lets name that Test1 and Test2.
I develope a package whihc will transform data from Test1 to Test2. I initiate this package from a Trigger for Insert on Test1. For eg.
CREATE TRIGGER Trigger_Test1
ON Test1
AFTER INSERT
AS
BEGIN
EXEC xp_cmdshell 'dtexec /FILE "C:TestTestPackage1.dtsx"'
END
This runs for ever when a record is inserted into the Test1 table.
But, when the trigger is on someother table , everything works fine.For eg, if the trigger is on the table TT1 & this trigger initiates the same package while inserting a record into TT1, everything is fine.
Can anyone help me on this.
Thanks
Man
I'm trying to create a stored procedure which will run 2 SSIS packages before it runs some other SQL code. I read [url=http://msdn2.microsoft.com/en-us/library/ms162810.aspx]this[/url] article. I'm trying to use the package from the file system.
Here is the my code:
CREATE PROCEDURE usp_participant_limits_report
AS
dtexec /f "C:....Activity_Limits.dtsx"
GO
The error message says it doesn't like the "/". Anyone?
Hello
do ne one know how to call a SQL SERVER agent job from a SSIS package?
regards,
Anas
I have a series of commands that I need to run which decrypt, unzip, and rename
They are all one line commands when entered on the cmd prompt, is there an easy way to do this in ssis or should i write an exe and call them from there?
Thanks
I am calling Store Procedure from my C# Code and inside the SP, I am calling my SSIS Package.It is working fine. On my local because I have all rights to run xp_cmdshell COMMAND. Now I have to transfer this SP to QA and Prod and I don't have rights to run xp_cmdshell COMMAND.
Here is my SP.
declare @cmd varchar(1000)
SET @ssispath = 'SSIS Package Path where my .dtsx package'
set @ExcelF = 'Passing My source file name and full path'
select @cmd = 'C:"program files (x86)""Microsoft SQL Server"100DTSBinnDTEXEC.exe /F "' + @ssispath + '"'
select @cmd = @cmd + ' /X86 /SET Package.Variables[User::ExcelF].Properties[Value];"' + @ExcelF + '" /X86 '
exec master..xp_cmdshell @cmd
My question is, is there other way to run/execute above Store Procedure/SSIS without XP_CMDSHELL Command?
Posted the same message to the Service Broker forum. But the board is neither responsive nor active. So I am trying this forum. Hope someone can help.
I would like to call an SSIS package from a Service Broker Queue.
There is one way that I am aware of -
Using xp_cmdshell from within an activation stored procedure and using DTEXEC.
Is there a more elegant way of executing an SSIS package from within SSB?
Also,
I am not interested in writing a .NET external activator to process my
messages in the queue. I would like this operation to be strictly
database oriented. Having said this, I am also trying to avoid triggers
processing the messages in the queue.
Thank you!
Hi All,
It's been a while since I post here. Anyway, I'm trying to call a SSIS package as my data source for SQL reporting service but I keep getting the error "Cannot create a connection to data source 'DsSSIS'.
My DsSSIS consists of the following in the connection string.
="/file c:FarmBillTesting.dtsx /Set Package.Variables[User::FilterValue].Properties[Value];" & Parameters!FilterValue.Value.ToString()
I have tried everything that I know to make this work but I have been able to do so. Any help from the group would be great.
Thanks
Ham
Hi:
I would like to find out how would I call an AS400 (IBM DB2) iSeries Stored Procedure from within my SSIS Package. What tasks should i be using? and do I need any additional adapters installed on my machine to access AS400(IBM DB2). Thanks.
MA
I am trying to call a SSIS package from a web service hosted on the same machine as the package file is sitting. All that the package does is a simple Execute SQL task with one datasource connection.
I have set impersonation as true. When I run the package from the web service on the virual port (through Visual studio IDE) it runs fine.
http://localhost:4609/WebServiceRunSSIS/LaunchSSISPackageServiceCS.asmx
In the above case I don't think impersonation means anything coz it runs successfully even when there is no impersonation set!
I then run the same service (asmx page) from the browser after making it a web service on my machine
http://localhost/WebServiceRunSSIS/LaunchSSISPackageServiceCS.asmx
I get an error indicating package failure.
I have enabled logging in SSIS. The package log indicates the following:
Failed to acquire connection "APNetDS". Connection may not be configured correctly or you may not have the right permissions on this connection.
Effectively, my web service impersonated account (which is my admin account) is not being authenticated for any of the db connection (uses windows integrated authentication) and I find that odd. To impersonate, I have set the Impersonation to true in the web.config file. The authentication mode is windows.
Please tell me what bit of security I am missing? In case if it helps, the database connection is to my local database and hence should not deny access to my own account. And yes, I think my impoersonation is working because when I debug, the user.identity shows my user id.
Thank you,
Sumeet
Need some clarification on calling an SSIS package from SSRS. I have managed to get this to work, but only if I actually build the SSIS package on the report server machine.My SSIS package is very simple it. The control flow is a single data flow task. Within the data flow task is an ole db data source and a data reader destination. I verified that the package works in BIDS.
Â
If I build it and deploy it on the report server I can execute it just fine from integration services (using the dtexec UI panel) in SSMS, no validation errors and no execution errors.If I try to build a dataset (specifying SSIS as the data source type) then immediately on referencing the package I get a "Package failed to validate error". However, if I bring the whole project over to the report server and build it then I can reference it from my Report Services project.
Â
I'm using package deployment security of "Don't Save Sensitive" for the SSIS package with the 'sa' login. After the deployment package is built I edit the connection string to include the password.The remote execution account for the Report Server is set to the administrator of the box. I know these account permissions are overkill, but I'll iron all that out once I get the basic pieces in place and working.
Hi,
When I call certain reports from an ASP application, some prompt for password and some are not.
I wonder why is this happen?
Under the Directory Security of Reports under IIS 6, I already enable Anonymous Access for IUSR_XXXX with the correct password.
I also assign IUSR_XXXX as Browser in Report Manager of Reporting Services.
The enviroment is Windows Server 2003 standard edition, IIS 6, SQL Server 2005.
Thanks in advance.
Best regards,
Pop
My project currently has task which have their own individual event handlers that get called onError (setup event messages). I also have a package level event handler that performs a generic task (sending events to the windows eventviewer) In the package level event handler there is a script task that decides on a boolean variable whether to "Success" or "Failure" to different task. When I fail one task of the main control flow, the task level event handler runs, then the package level event handler runs, and then it also runs again for some unknown reason. The second time it runs it picks up the value of a variable set in the variables window. However, I change this value at runtime to the value from a database. I can't understand why it would run the second time, and if it did run why it would have the value from the variables window and not the value that is set in memory. It's like the event handler runs with the value from memory and then runs and picks the values back out of the variables window, replacing the db values and re-runs.
Maybe the package itself is failing all together and then re-runing the package level event handler?
Any help would be greatly appreciated.
-Chris
I am trying to execute an SSIS package from an MS Access 2003 database that imports a table from the Access database into a target table in SQL 2005. I saved the package in SQL 2005 and tested it out. If I run it from the Management Studio Console with Run->Execute ... everything works just fine. However, if I try to run it using "Exec master.dbo.xp_cmdshell 'DTExec /SER DATAFORCE /DTS SQL2005TestPackage /CHECKPOINTING OFF /REPORTING V'" the execution will always fail when the Access database is open (shared mode). It will only work when the Access database is not open. The connection manager looks like this: "Data Source=E:Test.mdb;Provider=Microsoft.Jet.OLEDB.4.0;Persist Security Info=False;Jet OLEDB:Global Bulk Transactions=1". The error is listed below:
Code: 0xC0202009
Source: NewPackage Connection manager "SourceConnectionOLEDB"
Description: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Could not use ''; file already in use.".
What am I doing wrong?
I've imported an SSIS package into Management Studio (2008 R2) and I've set up a SQL Server Agent job to call the package but it fails due to error code: 0xc00160aa.
As far as I can tell this is because it is unable to read the location of the package despite it being a file system location within Management studio. Also I can run the package manually within Management Studio, but when I try to call it via the job it fails.
When running an integration services package from a windows service I get the "Object ... has been disconnected or does not exist at the server." exception after aproximately six minutes of execution.
This is *not* my windows service failing. I can loop indefinately while tracing to a log file within the service and it will run forever. While calling the mypackage.execute(...) method however, after six minutes (give or take) the exception is thrown...
my code looks something like this:
<code>
dim foo as Microsoft.SqlServer.Dts.Runtime.Application
mypackage = foo..LoadPackage(strimportPkgFilename, pkgevents)
results = myPackage.Execute(Nothing, Nothing, pkgevents, Nothing, Nothing)
</code>
<error>
A first chance exception of type 'System.Runtime.Remoting.RemotingException' occurred in mscorlib.dll
Exception in: frmMyForm.DoImports
Message: Object '/b76f98a0_5bd9_49d8_a524_eeb49d55b303/bqbhkjnaofq_ifr_cwz+srid_1.rem' has been disconnected or does not exist at the server.
</error>
oddly, this same code works perfectly if I run it within a windows form application no matter how long it takes.
It also runs fine if the package can complete in under six minutes.
Any suggestions?
Mark