Can't Execute Tasks After Moving .dtsx To New Server
Jan 10, 2007
Hello.
I have two servers, A for dev and B for production.
On server A I developed a project containing a SSIS package using SQL Server business intelligence development studio. The package runs fine from the BIDS and also when I save it to SQLServer itself and run it as a scheduled job using the SQLServer Agent.
All ready to roll out to Server B I thought, so I then saved the .dtsx file to a shared network drive.
On Server B, I created a empty project with the same name as it had on Server A. I then imported the .dtsx file into the project using project > add existing item.
The package appeared to import ok but I now cannot execute any of the data flow tasks in isolation. If I right click on them, there is no option to 'execute task' as there should be, it is not greyed out, it's not there at all.
Also, if I attempt to debug the whole package I get a message saying 'This document is opened by another project'.
Can anyone help with this as my deployment to live isn't going very well to say the least!
Both server A + B are 32-bit 2005 std edition SP1 on W2003 Server std edition SP1.
Thanks.
View 3 Replies
ADVERTISEMENT
May 30, 2006
hi,
When you copy a sequence container between dtsx you obtain a different size at destination. Any way to avoid this? I'd like to see that task with the same size.
Maybe some posh from my side...
View 1 Replies
View Related
Jun 12, 2007
I have some "Execute T-SQL Statement Tasks" in a package. I would like to run this same package on another SQL Server without having to change it on the other server. Since the server name can be given when setting up the connection, I think if I leave the server name out then the package could run on any server? Is my assumption correct?
View 10 Replies
View Related
Jul 3, 2007
I have a SSIS package that I want users to be able to execute by clicking a button on an a web page. The package does not require any parameters to be passed to it. Previously I've executed DTS packages without any problems but after a fair bit of investigation and trawling the net I've not found a way to do this successfully with SSIS. Some code I've tried - Dim app As New Application()
'
' Load package from file system
'
Dim package As Package = app.LoadPackage("c:ssisPackage.dtsx", Nothing)
'package.ImportConfigurationFile("c:ExamplePackage.dtsConfig")
'Dim vars As Variables = package.Variables
'vars("MyVariable").Value = "value from c#"
Dim result As DTSExecResult = package.Execute()
lblResult.Text = "Package Execution results: {0} " & result.ToString()
All I get is a message 'Failure'.
Does anyone have an example of how to do this?
View 10 Replies
View Related
Jun 11, 2008
Hi,
I have a table with queries. I need to execute those queries and pass results into a variable. Then use that variable/result to execute other queries to make business decisions.
EXAMPLE:
TASK#1
TABLE-A :has queries below
select count(*) from employee
select count(* ) from mangers
I want to execute those queries and store results in @counts. How I execute all queries in table A and pass that to a variable?
TASK#2
Then I have another SQL task(may be SQL task) which use the value @counts make some decisions
If @count > 1 then pass
If @count <1 then fail
How can I do that?
I am still new to SSIS and not very familiar with variables. Any advice would be appreciated.
View 6 Replies
View Related
Aug 14, 2007
I have a simple Error row redirection (from an OLEDB Command) to redirect all rows in error to a Transform script and thereafter to a Flat file destination. This is via the red arrow (DF path) output from the OLEDB Command.
I don't understand why this leg executes even when there are no rows in error? Zero byte Flat Files get written out when there are no errors.
How come? Why would a path with a red arrow execute even when there are no errors?
Part 2
When I introduce some errors in the data to cause an integrity violation, and I hook up an OnError event handler, it is never raised even through the error rows are successfully redirected and written out to the Flat File destination.
So what consitutes an error for a Data Flow Task? Is an error raised by Sql Server for an integrity violation bubble up as an error in the SSIS package?
View 2 Replies
View Related
Apr 7, 2006
Maybe I'm missing something, but I can't find how to run multiple tasks in sequence while in Visual Studio debug mode. In DTS design mode I grew accustomed to right-clicking tasks one-at-a time, but in SSIS I find the additional step of having to exit Debugging mode after every task gets old after a while.
There must be a way to start execution at a certain task and have the package continue all the way to some other specified task. It would also be nice to have every task in a Group execute in sequence and stop (even if connections continue beyond the group). I could even settle for repeatedly clicking the Continue button in Debug mode, but it's always grayed out when the current task is finished!
Can this be achieved by setting breakpoints?
View 3 Replies
View Related
Jun 12, 2006
Hi,
In my ETL project, l need to extract rawdata using winzip, and the DOS command l use is
c:program filesWinzipwinzip32.exe -min -e c:
awdata est.zip c:
awdata
where -min for minimize and -e for extract, c:
awdata est.zip for source file and c:
awdata for destination. It works fine by using DOS command.
l configure the Execute Process Tasks with the following parameters, i.e.
RequiredFullFileName : TRUE
Executable : c:program filesWinzipwinzip32.exe
Arguments : -min -e
WorkingDirectory : c:program filesWinzip
StandardInputVariable : User::gsRawFile
StandardOutputVariable : User::gsDestDir
Where User::gsRawFile = c:
awdata est.zip and User::gsDestDir = c:
awdata
But it can't work....no error return.
Any idea when l make the mistake?
Thanks.
Regards,
Yong Boon, Lim
View 3 Replies
View Related
Nov 27, 2007
I have a Package and a DataFlow Task.
The Package has TransactionOption=Required.
The DataFlow Task has an OLE DB Source and an OLE DB Destination.
The DataFlow Task has TransactionOption=Supported.
The package executes on a Workstation and DataSources for the OLE DB Source and the OLE DB Destination are on a Server.
After the package had been launched an error message showed:
[OLE DB Destination [43]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "DWH_Destination" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
[DTS.Pipeline] Error: component "OLE DB Destination" (43) failed the pre-execute phase and returned error code 0xC020801C.
[Connection manager "DWH_Destination"] Error: The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D024 "The transaction manager has disabled its support for remote/network transactions.".
[Connection manager "DWH_Destination"] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8004D024.
If I set TransactionOption=NotSupported in the DataFlow Task then the package executes successful.
What is the problem?
Thanks in advance.
View 4 Replies
View Related
Mar 28, 2007
Newbie here...be patient with me!
I added tasks to refresh two tables (delete from, insert into, update) to an SSIS project . I have them running from the WinXP scheduler. The issue:
In dev the tasks integrate and execute successfully from scheduler
In prod I can right click and execute each of the three tasks without any problem, but the same tasks cause my project to fail when executed from scheduler
Questions:
Any ideas about what I am failing to see?
How do I get a meaningful log messages from the tasks that are failing?
Thanks for your ideas...
Installed Edition: IDE Standard
SQL Server Analysis Services
Microsoft SQL Server Analysis Services Designer
Version 9.00.1399.00
SQL Server Integration Services
Microsoft SQL Server Integration Services Designer
Version 9.00.1399.00
SQL Server Reporting Services
Microsoft SQL Server Reporting Services Designers
Version 9.00.1399.00
Microsoft Visual Studio 2005
Version 8.0.50727.42 (RTM.050727-4200)
Microsoft .NET Framework
Version 2.0.50727
Installed Edition: IDE Standard
SQL Server Analysis Services
Microsoft SQL Server Analysis Services Designer
Version 9.00.1399.00
SQL Server Integration Services
Microsoft SQL Server Integration Services Designer
Version 9.00.1399.00
SQL Server Reporting Services
Microsoft SQL Server Reporting Services Designers
Version 9.00.1399.00
View 4 Replies
View Related
Mar 21, 2007
I am executing a stored proc with in the Execute SQL Task using OLEDB provider. I am passing the data as
ConnectionType: OLEDB
Connection : to my database
SQLSourceType: Direct
SQL Statment : Exec mysp 'table1',OUTPUT,OUTPUT
In the parmeter mappings:
variable1--direction Output, datatype Long, Parameter name: 0
variable2--direction Output, datatype date, Parameter name: 1
The variable 1 is created as int32 and variable 2 is created as dattime.
When i execute the SQLtask, I get error:
[Execute SQL Task] Error: Executing the query "Exec mysp 'table1',OUTPUT,OUTPUT" failed with the following error: "Error converting data type nvarchar to int.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
What am i missing. I tried changing the data types adding the input variable also as a variable in the mapping. Nothing seems to work. Any ideas please?
Anitha
View 2 Replies
View Related
Dec 8, 2006
Hi,
I am trying to programmatically execute a package that contains an Execute SQL Task component bound to a variable for its "SqlStatementSource" property (via an expression). The variable is of type String and contains a simple value of "SELECT 1". The Execute SQL Task contains an expression that sets the SqlStatementSource property to the value of this variable.
The package runs fine when I execute it via dtexec or BIDS, but when I attempt to run it via the object model, I receive the following error message:
The result of the expression ""@[User::Sql]"" on property "SqlStatementSource" cannot be written to the property. The expression was evaluated, but cannot be set on the property.
I did a search on this forum and noticed quite a few threads about this same issue, but no explanation/solution. We have quite a few packages that have dynamically constructed SQL statements for Execute SQL Tasks, and they are all failing to run via the object model. Is there something that I am missing?
Thanks,
Vitaly
View 1 Replies
View Related
Jul 2, 2015
Is it possible to do? I'm getting lock violations in I try to execute several tasks in parallel.
View 4 Replies
View Related
Jun 13, 2007
I have a dtsx package that is calling another dtsx package, however, if the called upon dtsx package fails with errors or what not, then the calling package does not continue as well. Is there any way to override this such that if the called upon package fails, the downstream actions in that package can stop, but the calling packages downstream actions to continue?
View 3 Replies
View Related
May 22, 2008
I created a dtsx with my user account and when I had imported it in SQL server
I get the following error when trying to execute:
Executed as user TESTGISSYSTEM Failed to decrypt protected XML node, Key not vallid for use in specified state.
Even when I remove the password for the dtsx I still get the same error.
I saw the reply's on this
Re: DTSX package will not run from SQL server agent
Thread Starter: jschroeder Started: 13 Aug 2007 10:08 PM Replies: 2
but it was no solution for my problem.
Thx
View 4 Replies
View Related
Aug 13, 2007
When I try to run a DTSX package from SQL server agent, I get this error message:
Started: 3:59:42 PM Error: 2007-08-13 15:59:42.39 Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "DTSroperty" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2007-08-13 16:00:00.98 Code: 0xC001602A Source: CFASerialNoExport Connection manager "FTP Connection Manager" Description: An error occurred in the requested FTP operation. Detailed error description: The password was not allowed . End Error Error: 2007-08-13 16:00:00.98 Code: 0xC002918F Source: FTP Task FTP Task Description: Unable to connect to FTP server using "FTP Connection Manager". End Error DTExec: The packag... The package execution fa... The step failed.
All my other packages run fine. This one contains an FTP task and will not run, although it will run if I execute it through the visual studio.
View 3 Replies
View Related
Aug 31, 2007
I get the following error:
SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "'I:MyFolderMyRptsMyApplicationMyDatabase.mdb' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides.".
The above path "I:...." is mapped on the server that SQL Server is running on.
This package runs with NO problems in MS Visual Studio.
View 1 Replies
View Related
Aug 6, 2007
What is the best way to move a SSIS solution to a new server so that I can edit the solution when I have problems?
Thanks,
View 5 Replies
View Related
Jun 18, 2008
Hi,
I would like to run several checklists against each sql server 2005 instance.
I can get a list of the sql server 2005 machines (Which are on the network) from a sql server table.
There is a another table which holds the list of the checks that need to be carried out against each sql server 2005 machine called tblCheckList.
The list of tasks in the table is briefly as follows:
1) get the path where the .mdf file is placed.
2) get the path where the .ldf file is placed
3) get the path where .BAK or .TRN are placed
4) get the path where the sql 2005 is installed
5) get the servicepack version
6) get the authentication
7) remove sample databases i.e. northwind or pubs, etc...
8) get the recovery model on UserDB
9) get the size of each database
...
...
...
The list goes on
Thanks
View 7 Replies
View Related
Sep 18, 2000
Hello:
1) Is there a way to call a second task 'upon completion' of the first one. Or would I need to place the code of the second task in one task?
(This is v6.5) I guess the main purpose is to avoid conflict & see if one fails, the other may succeed, etc. I generally like to keep diff tasks separate, but one is dependent upon the completion of the other.
2) I want to restore a db, upon completion of the backup of another db. They are on separate servers, but i know i can use remote sp's.
Any advice, help, code, scripts, etc, would be appreciated. Thank you.
View 1 Replies
View Related
Nov 9, 2006
Hi all
I want to schedule a task that checks if a file(s) exists on d:Acc and then run the sql script shown below i.e. with the file(s) to load the content of the file(s) every day new files will be loaded. after the file(s) are loaded the file(s) are deleted.
I currently can achieve the above using Java and sql server and running the program as a scheduled task... (only reason for change would be that i wouldnt require java, JDBC etc to run the software it would be easy manage, migrate etc)
I wanted to find out if it can be done with sql server directly? (i.e. check if file exist and ased on that carryout the task or other wise just ignore) What do i need to look for? does sql server have a procedural language in it to be used for such thing? does sql server have an inbuilt task scheduler?
I am currently using the following script in a java program please note that i have used fixed values in this script for readabliity (of what i am doing)..
@bulk_cmd varchar(1000)
SET @bulk_cmd = 'BULK INSERT AccInv..VW_AccInvoice
FROM ''d:Invbatch2001.txt''
WITH (FIELDTERMINATOR = '','', ROWTERMINATOR = '''+CHAR(10)+''')'
EXEC(@bulk_cmd)
View 3 Replies
View Related
May 19, 2008
Hello Forum
I have an issue that hopefully someone can help me with. We have SQL server running in a 64 bit environment. We are running SQL Server 2005 SP2. The problem I am experiencing is that my SSIS script components produce the following error when the SSIS package is executed from the server.
Code: 0x00000003 Source: Set Perspective Connection Description: Precompiled script failed to load. The computer that is running the Script Task does not have a compiler capable of recompiling the script. To recompile the script, see the Microsoft Knowledge Base article, KB931846 (http://go.microsoft.com/fwlink/?LinkId=81885).
I have reviewed this article and everything points to SP2 as being the fix. Being that I am running SP2 there is something else going on. I was curious to see if anyone else has run into this issue with SP2.
Any input you have is greatly appreciated.
Thanks in advance.
View 6 Replies
View Related
Sep 4, 2007
Trying to tranfer tables along with data using transfer sql server objects tasks and it is giving me an error <object> does not exists at source
for me It only works if table schema is owned by 'dbo ( even though Copy schema property is set to true)
Any workaround? Thanks in advance.
View 3 Replies
View Related
Nov 2, 2007
I've had problems trying to get a new maintenance plan on a new server to work.
I'm running a plan that does an integrity check, reindex, shrink, backup, the a maint cleanup to get rid of backups older than 2 weeks.
I'm getting failures that say:
Error Number
-1073548784
Error Message:
Executing the query "EXECUTE master.dbo.xp_delete_file 0,N'',N'BAK',N'2007-10-18T18:43:41',1
" failed with the following error: "Error executing extended stored procedure: Invalid Parameter". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Yes, this is a post SP2 server.
Current version, with the patches I've applied looking to fix this is: 9.0.3054
Additionally, if you go in to edit a maintenance cleanup task, you cannot click on OK, or the T-SQL. Changing values within it does not help.
Any clues?
charles@at@borner.us
View 1 Replies
View Related
Apr 2, 2007
I have this job that download 4 files once a month from the same server. The files are sizable and I need to download them in less than 5 hours total. In 2000 I use an active x script to generate the ftp script then execute the script. all four files download at the same time in 4 different tasks with no issues.
I am rewrote the process in 2005 so that it uses the IS FTP function but when all 4 ftp tasks kick off they all fail... instantly. the initially shared the same FTP connection manager so I created different ones for each and still the same result
the error is one that relates to changing directories.... Now if I just run one of the tasks it runs fine it is just when more than one try to run at once. I ended up putting in 10 second delays between each ftp task kicking off and it works just fine...
Does this sound like a bug??
Also... I am on SQL 2005 Enterprise SP1 on Windows 2003 enterprise SP1.
View 3 Replies
View Related
Nov 10, 2015
I trying to get the moving total (juts as moving average). It always sum up the current record plus previous two records as well and grouped by EmpId.For example, attaching a image of excel calculation.
View 3 Replies
View Related
Jun 17, 2008
Hi people.
I just run a new instance of a SQL 2005 64x in my network.
For now all is working right. I have only one problem.
I create a procedure for BI that use DTSX.
Sometime if i try to use from Integration services, these job start and immediatly stop without no error.
Someone can help me ?
thank you in advance.
View 3 Replies
View Related
Mar 7, 2006
Hi All, first post.
I have done a bit of searching around and cant find a clear answer to this question.
Current Setup
Desktop application (c#) that connects to a SQL Server 2005 express database on the same local network as the application (currently 3 users)
It is only a very small company and has just taken on their first remote worker, but expects to take on another 6-8 over the next few months. They have asked for the database to be moved online.
The application was written in such a way that everything has been done using no stored procs, or views, it is all native SQL.
This will be my first DB hosted online and before I go ahead and do anything I just wanted to make sure what I have to do is correct, sorry if this is a very basic question, although I have been programming for a long time, I have never had the chance to do any online databases before.
Will this work.
1.Find a SQL Server 2005 Hosting company.
2.Move the database to the server.
3.Setup the users permissions.
3.Alter the connection string in the application to point to the new location.
So the only thing that would change would be a new connection string in the application preferences?
Or am I living in a dream world, because nothing is ever that simple.
One thing I am worried about is the security/visiblity of the database and data as it travels from the server to the client and back.
Thanks for any advise you can give.
Mark
View 2 Replies
View Related
Feb 9, 2007
hi, does anyone know how I can make a connection to a 2000 db thru ssis?
View 8 Replies
View Related
Dec 28, 2003
Hi I'm very new to this but what I'm looking to do should'nt be too difficult although I've tried to no avail.
I'm looking to deploy a web site that uses SQL2000 to another server. Im trying to find out how to move the database to that server. Ideally I would like to be able to save it to CD for safety but its not like old access where you save the mdb file. I need to save the whole 'DTS' package, is that what its called? stored procedures, triggers the lot.
I tried the wizards but just got in a mess.
Thanks
View 4 Replies
View Related
Jul 28, 2000
I have serveral jobs set up on my current SQL Server, and I am not sure how to move the jobs to my new SQL server. What is the best way to do this?
Thanks,
John
View 2 Replies
View Related
Jul 23, 2004
Hi -
At my work, we have a SQL Server 2K DB on a server. This server is being replaced and the DB needs to be copied from the old server to the new server and I've been asked to perform this task. What I was planning on doing was:
1. Making a copy of the database on the current server
2. Taking the .BAK file created and coping it to the new server via a mapped drive
3. Restoring the database from the .BAK file on the new server
The only concern is moving the .BAK file across the network due to size.
Is this the best method to do this or is there a more preferred way? By doing this, what potential issues could be encountered?
Any help/advice is greatly appreciated!
Thanks!
View 3 Replies
View Related
Aug 17, 2007
Our SQL server, Report Server and IIS server are all on 1 physical server but that's going to change. We're moving the IIS/web server to a new box but the database server & report server will be on the old box.
Are there available documentation on how to move the Report Server service and IIS configuration of the Report Server?
View 5 Replies
View Related
