Hi
im using sqlserver studio managment
i goto a specific database and goto stored procedures and add stored procedures from context menu and created successfully .
i try to find it between procedures but not found i try to create it again gives me error that already found so.
where i can get my created stored procedures from sqlserver studio managment?
thanks in advance.
How to find out last created stored procedures in sql.
View 5 Replies View Related
Using SQL 2005, SP2. All of a sudden, whenever I create any stored procedures in the master database, they get created as system stored procedures. Doesn't matter what I name them, and what they do.
For example, even this simple little guy:
CREATE PROCEDURE BOB
AS
PRINT 'BOB'
GO
Gets created as a system stored procedure.
Any ideas what would cause that and/or how to fix it?
Thanks,
Jason
I need to create a stored procedure in the master database (yes, I know it's not that good of an idea). I'm working with SQL 2K5, SP2 Whenever I create it, it is marked as a system stored procedure no matter what I name it, what schema I put it in, or what user I use to create it (sysadmin or minimal permissions).
As soon as I create it, if I do any of the following, I can see it to be a system stored procedure and not a regular user sp.
1) SELECT * FROM sys.objects where is_ms_shipped = 1
2) SELECT * FROM sys.procedures where is_ms_shipped = 1
3) Looking in SSMS... There is a special folder for system stored procedures in SSMS, and mine is in there.
At least in my case, the only thing it hurts is that you have to be a sysadmin to execute that stored procedure (and I need to have a non sysadmin be able to execute it). Other than that, it executes normally when run by a sysadmin.
Any suggestions on why this is happening? It's only happening on 1 out of about 80 SQL servers we have.
i found that some stored procedure get created automatically in sqlserver 2000 (system stored procedures) ,while doing my work i accidentally deleted those stored procedures can any body answer following questions1: why these stored procedures are there and automatically created2: what happen en if i deleted those stored procedures3: how to recreate those stored procedures with limited user permission thanks in advance
View 2 Replies View RelatedAre they unique to a user/session? Like if 2 users simultaneously run the stored procedure?
TIA!
Hello,
This is my foray into Stored procedures, so I'm hoping this is a fairly basic question.
I'm writing a stored procedure, in which I dynamically create an SQL statement.
At the end of this, the SQL statement reads like:
Code SnippetSELECT COUNT(*) FROM StockLedger WHERE StockCode = 'STOCK1' AND IsOpen = 1 AND SizeCode = 'L' AND ColourCode = 'RED' AND LocationCode IS NULL AND RemainingQty > 0
Now this statement works a charm, and returns a single value. I want to assign this count to a variable, and use it further on in the stored procedure. This is where the problems start - I cant seem to do it.
If I hard code a statement, like
Code SnippetSELECT @LineCount = COUNT(*) FROM StockLedger
that works fine (although it brings back a count of all the lines).
But if I modify the dynamically created SQL Statement from earlier on to:
Code SnippetSELECT @LineCount = COUNT(*) FROM StockLedger WHERE StockCode = 'STOCK1' AND IsOpen = 1 AND SizeCode = 'L' AND ColourCode = 'RED' AND LocationCode IS NULL AND RemainingQty > 0
it doesnt work - it complains: Must declare the scalar variable "@LineCount".
Just to clarify, when I say "dynamically created an SQL statement, I mean that by a bunch of conditional statements I populate a varchar variable with the statement, and then eventually run it exec(@SQLStatementString)
So, my question would be, how do I do this? How do I make a dynamically generated SQL statement return a value to a variable?
Hi Guys,I want to find any specific text in all SQL server stored procedure.How can I do this. Please let me knowThanks in Advance
View 1 Replies View RelatedI have just successfully published an web app and db to a server
but when the web app tries to use a stored procedure it says that
it cannot find stored procedure.....in my data base......eeeer
anyone had this problem
Hi,
This may be a really silly question, but I am starting to experiment with stored procedures for the first time and I am not really sure about how they work. I am working in SQL Server Management Studio Express...
When putting a SELECT query statement into a stored procedure and executing it, how or where can you get or find the actual record set supposedly retrieved?
Thanks for any help..
--------------------------set ANSI_NULLS ONset QUOTED_IDENTIFIER ONGOALTER PROCEDURE [petrander].[DynamicQuery] @taxparent int = 1ASBEGIN SET NOCOUNT ON; SELECT ID, TaxonID, Taxon FROM QueryView WHERE ParentID1 = COALESCE(@taxparent, ParentID1) AND ParentID2 = COALESCE(@taxparent, ParentID2) AND ParentID3 = COALESCE(@taxparent, ParentID3) AND ParentID4 = COALESCE(@taxparent, ParentID4) AND ParentID5 = COALESCE(@taxparent, ParentID5) AND ParentID6 = COALESCE(@taxparent, ParentID6) AND ParentID7 = COALESCE(@taxparent, ParentID7) AND ParentID8 = COALESCE(@taxparent, ParentID8)END
I need to list out all the procedures which have select queries and does not use NOLOCK hint. Please note that there are more than 2000 sps and some sps have single select some have multiple, some does not have select queries at all. I need to find out only the ones which does not use NOLOCK hint in a select query.
View 8 Replies View RelatedHow can I find calls which do not exist in stored procedures and functions?We have many stored procedures, sometimes a stored procedure or function which is called does not exist. Is there a query/script or something that I can identify which stored procedures do not 'work' and which procedure/ function they are calling?I am searching for stored procedures and functions which are still called, but do not exist in the current database.
View 7 Replies View RelatedReplication-Replication Distribution Subsystem: agent PRODDATA6 failed. Could not find stored procedure 'sp_MSdel_dboActiveTask_msrepl_ccs'.
Replication-Replication Transaction-Log Reader Subsystem: agent PRODDATA6. The process could not execute 'sp_replcmds' on 'PRODDATA6'.
Replication-Replication Distribution Subsystem: agent PRODDATA6. Could not find stored procedure 'sp_MSupd_dboActiveTask'.
Looks like these sp's got deleted?
One of our Oracle Tables changed and I am wondering if there's any way that I can query all of our Stored Procedures to try and find out if that Oracle Table Name is referenced in any of our SQL Server Stored Procedures OPENQUERY statements?
View 2 Replies View RelatedHow can I find out who created a table?
View 6 Replies View RelatedI'am using SqlServer 2005..
I'am able to view created tables via:
SELECT TABLE_NAME FROM INFORMATION_SCHEMA.TABLES;
How do I do the same with created procedures and functions? i.e how do I view all procedures and functions using SELECT query?
The views are in XYZ production database and user needs the list of indexes on the tables on which the views has been created.
query to find list of indexes on the tables on which the views has been created.
I want to know the differences between SQL Server 2000 storedprocedures and oracle stored procedures? Do they have differentsyntax? The concept should be the same that the stored proceduresexecute in the database server with better performance?Please advise good references for Oracle stored procedures also.thanks!!
View 11 Replies View RelatedScript to find the details of creation date and modified date of all files located in a path?
I wanna write few custom messages before I delete some files from a path.
Hi,
This Might be a really simple thing, however we have just installed SQL server 2005 on a new server, and are having difficulties with the set up of the Store Procedures. Every time we try to modify an existing stored procedure it attempts to save it as an SQL file, unlike in 2000 where it saved it as part of the database itself.
Thank you in advance for any help on this matter
hi i have 100 of stored procedures and many has linked servers in my database.
and now i need to know how many storedprocedures are using particular linked server .
plz advice to do this
regards
karthikeyan.D
Our company purchased a app. Is there any way to find out which store procedures were fired once a button was clicked?
View 3 Replies View RelatedI have set up SQL Server 2005 Express and related tools. Through the Management Studio Express, sometimes i can successfuly create stored procedures, sometimes i cannot. When i run the below stored procedure script the stored procedure is never created. Am i missing something here or is there something flaky regarding SQL Server 2005 Express and/or the Management Studio Express?
The below stored procedure will script the data in a table. It compiles fine.
SET NOCOUNT ON -- prevents row count from being returned
GO -- signals end of batch of T-SQL statements; not a T-SQL command
PRINT 'Using TEST database'
USE TEST
GO
PRINT 'Checking for the existence of this procedure'
-- if procedure exists then drop it
IF (SELECT OBJECT_ID('sp_generate_inserts','P')) IS NOT NULL
BEGIN
PRINT 'Procedure already exists. So, dropping it'
DROP PROC sp_generate_inserts
END
GO
CREATE PROC sp_generate_inserts
(
@table_name varchar(776), -- The table/view for which the INSERT statements will be generated using the existing data
@target_table varchar(776) = NULL, -- Use this parameter to specify a different table name into which the data will be inserted
@include_column_list bit = 1, -- Use this parameter to include/ommit column list in the generated INSERT statement
@from varchar(800) = NULL, -- Use this parameter to filter the rows based on a filter condition (using WHERE)
@include_timestamp bit = 0, -- Specify 1 for this parameter, if you want to include the TIMESTAMP/ROWVERSION column's data in the INSERT statement
@debug_mode bit = 0, -- If @debug_mode is set to 1, the SQL statements constructed by this procedure will be printed for later examination
@owner varchar(64) = NULL, -- Use this parameter if you are not the owner of the table
@ommit_images bit = 0, -- Use this parameter to generate INSERT statements by omitting the 'image' columns
@ommit_identity bit = 0, -- Use this parameter to ommit the identity columns
@top int = NULL, -- Use this parameter to generate INSERT statements only for the TOP n rows
@cols_to_include varchar(8000) = NULL, -- List of columns to be included in the INSERT statement
@cols_to_exclude varchar(8000) = NULL, -- List of columns to be excluded from the INSERT statement
@disable_constraints bit = 0, -- When 1, disables foreign key constraints and enables them after the INSERT statements
@ommit_computed_cols bit = 0 -- When 1, computed columns will not be included in the INSERT statement
)
AS
BEGIN
/***********************************************************************************************************
Procedure: sp_generate_inserts (Build 22)
(Copyright © 2002 Narayana Vyas Kondreddi. All rights reserved.)
Purpose: To generate INSERT statements from existing data.
These INSERTS can be executed to regenerate the data at some other location.
This procedure is also useful to create a database setup, where in you can
script your data along with your table definitions.
Written by: Narayana Vyas Kondreddi
http://vyaskn.tripod.com
Acknowledgements:
Divya Kalra -- For beta testing
Mark Charsley -- For reporting a problem with scripting uniqueidentifier columns with NULL values
Artur Zeygman -- For helping me simplify a bit of code for handling non-dbo owned tables
Joris Laperre -- For reporting a regression bug in handling text/ntext columns
Tested on: SQL Server 7.0 and SQL Server 2000 and SQL Server 2005
Date created: January 17th 2001 21:52 GMT
Date modified: May 1st 2002 19:50 GMT
Email: vyaskn@hotmail.com
NOTE: This procedure may not work with tables with too many columns.
Results can be unpredictable with huge text columns or SQL Server 2000's sql_variant data types
Whenever possible, Use @include_column_list parameter to ommit column list in the INSERT statement, for better results
IMPORTANT: This procedure is not tested with internation data (Extended characters or Unicode). If needed
you might want to convert the datatypes of character variables in this procedure to their respective unicode counterparts
like nchar and nvarchar
ALSO NOTE THAT THIS PROCEDURE IS NOT UPDATED TO WORK WITH NEW DATA TYPES INTRODUCED IN SQL SERVER 2005 / YUKON
Example 1: To generate INSERT statements for table 'titles':
EXEC sp_generate_inserts 'titles'
Example 2: To ommit the column list in the INSERT statement: (Column list is included by default)
IMPORTANT: If you have too many columns, you are advised to ommit column list, as shown below,
to avoid erroneous results
EXEC sp_generate_inserts 'titles', @include_column_list = 0
Example 3: To generate INSERT statements for 'titlesCopy' table from 'titles' table:
EXEC sp_generate_inserts 'titles', 'titlesCopy'
Example 4: To generate INSERT statements for 'titles' table for only those titles
which contain the word 'Computer' in them:
NOTE: Do not complicate the FROM or WHERE clause here. It's assumed that you are good with T-SQL if you are using this parameter
EXEC sp_generate_inserts 'titles', @from = "from titles where title like '%Computer%'"
Example 5: To specify that you want to include TIMESTAMP column's data as well in the INSERT statement:
(By default TIMESTAMP column's data is not scripted)
EXEC sp_generate_inserts 'titles', @include_timestamp = 1
Example 6: To print the debug information:
EXEC sp_generate_inserts 'titles', @debug_mode = 1
Example 7: If you are not the owner of the table, use @owner parameter to specify the owner name
To use this option, you must have SELECT permissions on that table
EXEC sp_generate_inserts Nickstable, @owner = 'Nick'
Example 8: To generate INSERT statements for the rest of the columns excluding images
When using this otion, DO NOT set @include_column_list parameter to 0.
EXEC sp_generate_inserts imgtable, @ommit_images = 1
Example 9: To generate INSERT statements excluding (ommiting) IDENTITY columns:
(By default IDENTITY columns are included in the INSERT statement)
EXEC sp_generate_inserts mytable, @ommit_identity = 1
Example 10: To generate INSERT statements for the TOP 10 rows in the table:
EXEC sp_generate_inserts mytable, @top = 10
Example 11: To generate INSERT statements with only those columns you want:
EXEC sp_generate_inserts titles, @cols_to_include = "'title','title_id','au_id'"
Example 12: To generate INSERT statements by omitting certain columns:
EXEC sp_generate_inserts titles, @cols_to_exclude = "'title','title_id','au_id'"
Example 13: To avoid checking the foreign key constraints while loading data with INSERT statements:
EXEC sp_generate_inserts titles, @disable_constraints = 1
Example 14: To exclude computed columns from the INSERT statement:
EXEC sp_generate_inserts MyTable, @ommit_computed_cols = 1
***********************************************************************************************************/
SET NOCOUNT ON
--Making sure user only uses either @cols_to_include or @cols_to_exclude
IF ((@cols_to_include IS NOT NULL) AND (@cols_to_exclude IS NOT NULL))
BEGIN
RAISERROR('Use either @cols_to_include or @cols_to_exclude. Do not use both the parameters at once',16,1)
RETURN -1 --Failure. Reason: Both @cols_to_include and @cols_to_exclude parameters are specified
END
--Making sure the @cols_to_include and @cols_to_exclude parameters are receiving values in proper format
IF ((@cols_to_include IS NOT NULL) AND (PATINDEX('''%''',@cols_to_include) = 0))
BEGIN
RAISERROR('Invalid use of @cols_to_include property',16,1)
PRINT 'Specify column names surrounded by single quotes and separated by commas'
PRINT 'Eg: EXEC sp_generate_inserts titles, @cols_to_include = "''title_id'',''title''"'
RETURN -1 --Failure. Reason: Invalid use of @cols_to_include property
END
IF ((@cols_to_exclude IS NOT NULL) AND (PATINDEX('''%''',@cols_to_exclude) = 0))
BEGIN
RAISERROR('Invalid use of @cols_to_exclude property',16,1)
PRINT 'Specify column names surrounded by single quotes and separated by commas'
PRINT 'Eg: EXEC sp_generate_inserts titles, @cols_to_exclude = "''title_id'',''title''"'
RETURN -1 --Failure. Reason: Invalid use of @cols_to_exclude property
END
--Checking to see if the database name is specified along wih the table name
--Your database context should be local to the table for which you want to generate INSERT statements
--specifying the database name is not allowed
IF (PARSENAME(@table_name,3)) IS NOT NULL
BEGIN
RAISERROR('Do not specify the database name. Be in the required database and just specify the table name.',16,1)
RETURN -1 --Failure. Reason: Database name is specified along with the table name, which is not allowed
END
--Checking for the existence of 'user table' or 'view'
--This procedure is not written to work on system tables
--To script the data in system tables, just create a view on the system tables and script the view instead
IF @owner IS NULL
BEGIN
IF ((OBJECT_ID(@table_name,'U') IS NULL) AND (OBJECT_ID(@table_name,'V') IS NULL))
BEGIN
RAISERROR('User table or view not found.',16,1)
PRINT 'You may see this error, if you are not the owner of this table or view. In that case use @owner parameter to specify the owner name.'
PRINT 'Make sure you have SELECT permission on that table or view.'
RETURN -1 --Failure. Reason: There is no user table or view with this name
END
END
ELSE
BEGIN
IF NOT EXISTS (SELECT 1 FROM INFORMATION_SCHEMA.TABLES WHERE TABLE_NAME = @table_name AND (TABLE_TYPE = 'BASE TABLE' OR TABLE_TYPE = 'VIEW') AND TABLE_SCHEMA = @owner)
BEGIN
RAISERROR('User table or view not found.',16,1)
PRINT 'You may see this error, if you are not the owner of this table. In that case use @owner parameter to specify the owner name.'
PRINT 'Make sure you have SELECT permission on that table or view.'
RETURN -1 --Failure. Reason: There is no user table or view with this name
END
END
--Variable declarations
DECLARE @Column_ID int,
@Column_List varchar(8000),
@Column_Name varchar(128),
@Start_Insert varchar(786),
@Data_Type varchar(128),
@Actual_Values varchar(8000), --This is the string that will be finally executed to generate INSERT statements
@IDN varchar(128) --Will contain the IDENTITY column's name in the table
--Variable Initialization
SET @IDN = ''
SET @Column_ID = 0
SET @Column_Name = ''
SET @Column_List = ''
SET @Actual_Values = ''
IF @owner IS NULL
BEGIN
SET @Start_Insert = 'INSERT INTO ' + '[' + RTRIM(COALESCE(@target_table,@table_name)) + ']'
END
ELSE
BEGIN
SET @Start_Insert = 'INSERT ' + '[' + LTRIM(RTRIM(@owner)) + '].' + '[' + RTRIM(COALESCE(@target_table,@table_name)) + ']'
END
--To get the first column's ID
SELECT @Column_ID = MIN(ORDINAL_POSITION)
FROM INFORMATION_SCHEMA.COLUMNS (NOLOCK)
WHERE TABLE_NAME = @table_name AND
(@owner IS NULL OR TABLE_SCHEMA = @owner)
--Loop through all the columns of the table, to get the column names and their data types
WHILE @Column_ID IS NOT NULL
BEGIN
SELECT @Column_Name = QUOTENAME(COLUMN_NAME),
@Data_Type = DATA_TYPE
FROM INFORMATION_SCHEMA.COLUMNS (NOLOCK)
WHERE ORDINAL_POSITION = @Column_ID AND
TABLE_NAME = @table_name AND
(@owner IS NULL OR TABLE_SCHEMA = @owner)
IF @cols_to_include IS NOT NULL --Selecting only user specified columns
BEGIN
IF CHARINDEX( '''' + SUBSTRING(@Column_Name,2,LEN(@Column_Name)-2) + '''',@cols_to_include) = 0
BEGIN
GOTO SKIP_LOOP
END
END
IF @cols_to_exclude IS NOT NULL --Selecting only user specified columns
BEGIN
IF CHARINDEX( '''' + SUBSTRING(@Column_Name,2,LEN(@Column_Name)-2) + '''',@cols_to_exclude) <> 0
BEGIN
GOTO SKIP_LOOP
END
END
--Making sure to output SET IDENTITY_INSERT ON/OFF in case the table has an IDENTITY column
IF (SELECT COLUMNPROPERTY( OBJECT_ID(QUOTENAME(COALESCE(@owner,USER_NAME())) + '.' + @table_name),SUBSTRING(@Column_Name,2,LEN(@Column_Name) - 2),'IsIdentity')) = 1
BEGIN
IF @ommit_identity = 0 --Determing whether to include or exclude the IDENTITY column
SET @IDN = @Column_Name
ELSE
GOTO SKIP_LOOP
END
--Making sure whether to output computed columns or not
IF @ommit_computed_cols = 1
BEGIN
IF (SELECT COLUMNPROPERTY( OBJECT_ID(QUOTENAME(COALESCE(@owner,USER_NAME())) + '.' + @table_name),SUBSTRING(@Column_Name,2,LEN(@Column_Name) - 2),'IsComputed')) = 1
BEGIN
GOTO SKIP_LOOP
END
END
--Tables with columns of IMAGE data type are not supported for obvious reasons
IF(@Data_Type in ('image'))
BEGIN
IF (@ommit_images = 0)
BEGIN
RAISERROR('Tables with image columns are not supported.',16,1)
PRINT 'Use @ommit_images = 1 parameter to generate INSERTs for the rest of the columns.'
PRINT 'DO NOT ommit Column List in the INSERT statements. If you ommit column list using @include_column_list=0, the generated INSERTs will fail.'
RETURN -1 --Failure. Reason: There is a column with image data type
END
ELSE
BEGIN
GOTO SKIP_LOOP
END
END
--Determining the data type of the column and depending on the data type, the VALUES part of
--the INSERT statement is generated. Care is taken to handle columns with NULL values. Also
--making sure, not to lose any data from flot, real, money, smallmomey, datetime columns
SET @Actual_Values = @Actual_Values +
CASE
WHEN @Data_Type IN ('char','varchar','nchar','nvarchar')
THEN
'COALESCE('''''''' + REPLACE(RTRIM(' + @Column_Name + '),'''''''','''''''''''')+'''''''',''NULL'')'
WHEN @Data_Type IN ('datetime','smalldatetime')
THEN
'COALESCE('''''''' + RTRIM(CONVERT(char,' + @Column_Name + ',109))+'''''''',''NULL'')'
WHEN @Data_Type IN ('uniqueidentifier')
THEN
'COALESCE('''''''' + REPLACE(CONVERT(char(255),RTRIM(' + @Column_Name + ')),'''''''','''''''''''')+'''''''',''NULL'')'
WHEN @Data_Type IN ('text','ntext')
THEN
'COALESCE('''''''' + REPLACE(CONVERT(char(8000),' + @Column_Name + '),'''''''','''''''''''')+'''''''',''NULL'')'
WHEN @Data_Type IN ('binary','varbinary')
THEN
'COALESCE(RTRIM(CONVERT(char,' + 'CONVERT(int,' + @Column_Name + '))),''NULL'')'
WHEN @Data_Type IN ('timestamp','rowversion')
THEN
CASE
WHEN @include_timestamp = 0
THEN
'''DEFAULT'''
ELSE
'COALESCE(RTRIM(CONVERT(char,' + 'CONVERT(int,' + @Column_Name + '))),''NULL'')'
END
WHEN @Data_Type IN ('float','real','money','smallmoney')
THEN
'COALESCE(LTRIM(RTRIM(' + 'CONVERT(char, ' + @Column_Name + ',2)' + ')),''NULL'')'
ELSE
'COALESCE(LTRIM(RTRIM(' + 'CONVERT(char, ' + @Column_Name + ')' + ')),''NULL'')'
END + '+' + ''',''' + ' + '
--Generating the column list for the INSERT statement
SET @Column_List = @Column_List + @Column_Name + ','
SKIP_LOOP: --The label used in GOTO
SELECT @Column_ID = MIN(ORDINAL_POSITION)
FROM INFORMATION_SCHEMA.COLUMNS (NOLOCK)
WHERE TABLE_NAME = @table_name AND
ORDINAL_POSITION > @Column_ID AND
(@owner IS NULL OR TABLE_SCHEMA = @owner)
--Loop ends here!
END
--To get rid of the extra characters that got concatenated during the last run through the loop
SET @Column_List = LEFT(@Column_List,len(@Column_List) - 1)
SET @Actual_Values = LEFT(@Actual_Values,len(@Actual_Values) - 6)
IF LTRIM(@Column_List) = ''
BEGIN
RAISERROR('No columns to select. There should at least be one column to generate the output',16,1)
RETURN -1 --Failure. Reason: Looks like all the columns are ommitted using the @cols_to_exclude parameter
END
--Forming the final string that will be executed, to output the INSERT statements
IF (@include_column_list <> 0)
BEGIN
SET @Actual_Values =
'SELECT ' +
CASE WHEN @top IS NULL OR @top < 0 THEN '' ELSE ' TOP ' + LTRIM(STR(@top)) + ' ' END +
'''' + RTRIM(@Start_Insert) +
' ''+' + '''(' + RTRIM(@Column_List) + '''+' + ''')''' +
' +''VALUES(''+ ' + @Actual_Values + '+'')''' + ' ' +
COALESCE(@from,' FROM ' + CASE WHEN @owner IS NULL THEN '' ELSE '[' + LTRIM(RTRIM(@owner)) + '].' END + '[' + rtrim(@table_name) + ']' + '(NOLOCK)')
END
ELSE IF (@include_column_list = 0)
BEGIN
SET @Actual_Values =
'SELECT ' +
CASE WHEN @top IS NULL OR @top < 0 THEN '' ELSE ' TOP ' + LTRIM(STR(@top)) + ' ' END +
'''' + RTRIM(@Start_Insert) +
' '' +''VALUES(''+ ' + @Actual_Values + '+'')''' + ' ' +
COALESCE(@from,' FROM ' + CASE WHEN @owner IS NULL THEN '' ELSE '[' + LTRIM(RTRIM(@owner)) + '].' END + '[' + rtrim(@table_name) + ']' + '(NOLOCK)')
END
--Determining whether to ouput any debug information
IF @debug_mode =1
BEGIN
PRINT '/*****START OF DEBUG INFORMATION*****'
PRINT 'Beginning of the INSERT statement:'
PRINT @Start_Insert
PRINT ''
PRINT 'The column list:'
PRINT @Column_List
PRINT ''
PRINT 'The SELECT statement executed to generate the INSERTs'
PRINT @Actual_Values
PRINT ''
PRINT '*****END OF DEBUG INFORMATION*****/'
PRINT ''
END
PRINT '--INSERTs generated by ''sp_generate_inserts'' stored procedure written by Vyas'
PRINT '--Build number: 22'
PRINT '--Problems/Suggestions? Contact Vyas @ vyaskn@hotmail.com'
PRINT '--http://vyaskn.tripod.com'
PRINT ''
PRINT 'SET NOCOUNT ON'
PRINT ''
--Determining whether to print IDENTITY_INSERT or not
IF (@IDN <> '')
BEGIN
PRINT 'SET IDENTITY_INSERT ' + QUOTENAME(COALESCE(@owner,USER_NAME())) + '.' + QUOTENAME(@table_name) + ' ON'
PRINT 'GO'
PRINT ''
END
IF @disable_constraints = 1 AND (OBJECT_ID(QUOTENAME(COALESCE(@owner,USER_NAME())) + '.' + @table_name, 'U') IS NOT NULL)
BEGIN
IF @owner IS NULL
BEGIN
SELECT 'ALTER TABLE ' + QUOTENAME(COALESCE(@target_table, @table_name)) + ' NOCHECK CONSTRAINT ALL' AS '--Code to disable constraints temporarily'
END
ELSE
BEGIN
SELECT 'ALTER TABLE ' + QUOTENAME(@owner) + '.' + QUOTENAME(COALESCE(@target_table, @table_name)) + ' NOCHECK CONSTRAINT ALL' AS '--Code to disable constraints temporarily'
END
PRINT 'GO'
END
PRINT ''
PRINT 'PRINT ''Inserting values into ' + '[' + RTRIM(COALESCE(@target_table,@table_name)) + ']' + ''''
--All the hard work pays off here!!! You'll get your INSERT statements, when the next line executes!
EXEC (@Actual_Values)
PRINT 'PRINT ''Done'''
PRINT ''
IF @disable_constraints = 1 AND (OBJECT_ID(QUOTENAME(COALESCE(@owner,USER_NAME())) + '.' + @table_name, 'U') IS NOT NULL)
BEGIN
IF @owner IS NULL
BEGIN
SELECT 'ALTER TABLE ' + QUOTENAME(COALESCE(@target_table, @table_name)) + ' CHECK CONSTRAINT ALL' AS '--Code to enable the previously disabled constraints'
END
ELSE
BEGIN
SELECT 'ALTER TABLE ' + QUOTENAME(@owner) + '.' + QUOTENAME(COALESCE(@target_table, @table_name)) + ' CHECK CONSTRAINT ALL' AS '--Code to enable the previously disabled constraints'
END
PRINT 'GO'
END
PRINT ''
IF (@IDN <> '')
BEGIN
PRINT 'SET IDENTITY_INSERT ' + QUOTENAME(COALESCE(@owner,USER_NAME())) + '.' + QUOTENAME(@table_name) + ' OFF'
PRINT 'GO'
END
PRINT 'SET NOCOUNT OFF'
SET NOCOUNT OFF
RETURN 0 --Success. We are done!
END
GO
PRINT 'Created the procedure'
GO
--Mark procedure as system object
EXEC sys.sp_MS_marksystemobject sp_generate_inserts
GO
PRINT 'Granting EXECUTE permission on sp_generate_inserts to all users'
GRANT EXEC ON sp_generate_inserts TO public
SET NOCOUNT OFF
GO
PRINT 'Done'
Okay. Scenario:
We as a company have several companies that request custom reports from us. However, the custom reports that they select will generally always have the same fields (and formulas) once they make up their minds on what works for them.
From what I know, Stored Procs are usually faster at running things unless the parameters are changing too drastically that they get passed.
This being the case, it would seem like a good case for creating a stored proc per report. This would alleviate the possability that the server chooses an execution plan that works great some of the time but the rest of the time run lousy.
So these thoughts being laid out, is there a good,nice,easy, convenient way to generate/alter a stored proc, either by another stored/extended proc, or by dynamic sql going to the server?
Or if not, is there some round-about yet effective way of doing this?
Thank you in advance for any help.
-ZanderB
Hi, I created the stored procedure with encryption and now I want to see the same procedure but I am not able to see the text of procedure with SP_HELPTEXT command. Please help so that I could see my stored procedure with sp_helptext command. Thanks.
My command was:
sp_helptext dm_sp_Outstanding_Events
Error message:
The text for object 'dm_sp_Outstanding_Events' is encrypted.
I'm trying to fire a DTS package through a stored procedure.
After running my one stored procedure I got my DTS file to create just fine. However after this point I'm stuck...I can't do anything else with this file and I need to update data with it.
How would I use the DTS file to update my data.
Thanks,
RB
I'm using the ADO command object to call a stored procedure in SQL Server from Access 2000.
Set rst = cmd.execute
I receive the correct data back but I can't edit the recordset or addnew.
Is this possible????
Thanks
Hi,I am using data from multiple databases and/or queries. It would greatlysimplify and speed things up if I could use CONTAINS in processing theresults. However, "CONTAINS" requires the data to be indexed. Due to theamount of processing, I think it would be faster even if I had to re-indexevery time.For example, I would like to do something like this (simplified toillustrate the desired functionality... This should show all of the wordsfrom one table that are not contained in their current or inflectional formswithin another table):SELECT W1.ContentFROM(SELECT Word AS ContentFROM MyTable) W1LEFT OUTER JOIN(SELECT Phrase AS ContentFROM MyOtherTable) W2ON W2.Content CONTAINS(INFLECTIONAL, W1.Content)WHERE W2.Content IS NULLCan the results of a procedure be indexed? If not, can I drop the resultsinto a new table and trigger an automatic index of it, pausing the procedureuntil the indexing is done?Or, it there another way?Thanks!
View 2 Replies View Relatedtrying to get a new database created then running a script to created the tables, relationships, indexes and insert default data. All this I'm making happen during the installation of my Windows application. I'm installing SQL 2012 Express as a prerequisite of my application and then opening a connection to that installed SQL Server using Windows Authentication.Â
E.g.: Data Source=ComputerNameSQLEXPRESS;Initial Catalog=master;Integrated Security=SSPI; Then I run a query from my code to create the database eg: "CREATE DATABASE [MyDatabaseName]".
From this point I run a script using a Batch file containing "SQLCMD....... Myscriptname.sql". In my script I have my tables being created using "Use [MyDatabaseName]   Go  CREATE TABLE [dbo].[MyTableName] .....". So question is, should I have [dbo]. as part of my Create Table T-SQL commands? Can I remove "[dbo]."? Who would be the owner of the database? If I can remove the [dbo]., should I also remove dbo. from any query string from within my code?
How do I search for and print all stored procedure names in a particular database? I can use the following query to search and print out all table names in a database. I just need to figure out how to modify the code below to search for stored procedure names. Can anyone help me out?
SELECT TABLE_SCHEMA + '.' + TABLE_NAME
FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_TYPE = 'BASE TABLE'
Seems like I'm stealing all the threads here, : But I need to learn :) I have a StoredProcedure that needs to return values that other StoredProcedures return.Rather than have my DataAccess layer access the DB multiple times, I would like to call One stored Procedure, and have that stored procedure call the others to get the information I need. I think this way would be more efficient than accessing the DB multiple times. One of my SP is:SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, S.Name AS 'StatusName', S.ItemDetailStatusID, S.InProgress as 'StatusInProgress', S.Color AS 'StatusColor',T.[Name] AS 'TypeName', T.Prefix, T.Name AS 'ItemDetailTypeName', T.ItemDetailTypeID FROM [Item].ItemDetails I INNER JOIN Item.ItemDetailStatus S ON I.ItemDetailStatusID = S.ItemDetailStatusID INNER JOIN [Item].ItemDetailTypes T ON I.ItemDetailTypeID = T.ItemDetailTypeID However, I already have StoredProcedures that return the exact same data from the ItemDetailStatus table and ItemDetailTypes table.Would it be better to do it above, and have more code to change when a new column/field is added, or more checks, or do something like:(This is not propper SQL) SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, EXEC [Item].ItemDetailStatusInfo I.ItemDetailStatusID, EXEC [Item].ItemDetailTypeInfo I.ItemDetailTypeID FROM [Item].ItemDetails IOr something like that... Any thoughts?
View 3 Replies View RelatedGreetings:
I have MSSQL 2005. On earlier versions of MSSQL saving a stored procedure wasn't a confusing action. However, every time I try to save my completed stored procedure (parsed successfully ) I'm prompted to save it as a query on the hard drive.
How do I cause the 'Save' action to add the new stored procedure to my database's list of stored procedures?
Thanks!
I can create 1 view of a database then use that views results to query
but i want do this with a stored procedure
pass some data to it, so it selects some data
query the results it created and output this data.
ie
pass 2 values to the procedure
(
@FirstValue int,
@secondValue int output
)
select from a database with the firstpassed value
Select *
From TableName
Where ID = @FirstValue
Then
using the results from the above select
Select *
From theResultsOfAbove
Where ID = @SecondValue
any ideas would be fabo !