Hi,
Having problem with OLE-DB connection to informix.
Created a flat file has two columns and 2 row:
1|a
2|b
tried to load it to a informix table:
create table t
( c1 int,
c2 char
);
2 rows inserted, but only column c1 got data.
Changed c2 from char to varchar then ok.
thanks for any help.
gg
Hi all,I have a table called PTRANS with few columns (see create script below).I have created a view on top that this table VwTransaction (See below)I can now run this query without a problem:select * from dbo.VwTransactionwhereAssetNumber = '101001' andTransactionDate <= '7/1/2003'But when I create an index on the PTRANS table using the command below:CREATE INDEX IDX_PTRANS_CHL# ON PTRANS(CHL#)The same query that ran fine before, fails with the error:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value.I can run the same query by commeting out the AssetNumber clause and itworks fine. I can also run the query commenting out the TransactionDatecolumn and it works fine. But when I have both the conditions in theWHERE clause, it gives me this error. Dropping the index solves theproblem.Can anyone tell me why an index would cause a query to fail?Thanks a lot in advance,AmirCREATE TABLE [PTRANS] ([CHL#] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[CHCENT] [numeric](2, 0) NOT NULL ,[CHYYMM] [numeric](4, 0) NOT NULL ,[CHDAY] [numeric](2, 0) NOT NULL ,[CHTC] [char] (2) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL) ON [PRIMARY]GOCREATE VIEW dbo.vwTransactionsASSELECT CONVERT(datetime, dbo.udf_AddDashes(REPLICATE('0', 2 -LEN(CHCENT)) + CONVERT(varchar, CHCENT) + REPLICATE('0', 4 -LEN(CHYYMM))+ CONVERT(varchar, CHYYMM) + REPLICATE('0', 2 -LEN(CHDAY)) + CONVERT(varchar, CHDAY)), 20) AS TransactionDate,CHL# AS AssetNumber,CHTC AS TransactionCodeFROM dbo.PTRANSWHERE (CHCENT <> 0) AND (CHTC <> 'RA')*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedDear All,
I am new to MS SQL. One VB application that I need to maintain using it.
There is one problem reported but I couldn't explain: one field is declared
as Char (20), but the application seems able to insert a string with length
even 30. There is no character truncatd when retrieved neither.
However, I cannot simulate the case in the MSSQL database manager. When I executed a SQL script to insert, I was simply not allowed to do so.
Any explanation to the sDid anyone encounter same thing before?
Thanks for any hint.
Regards
hello all .. I have a form that includes two textboxes (Date and Version) .. When I try to insert the record I get the following error message .. seems that something wrong with my coversion (Data type)"The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated."
in my SQL database I have the date feild as datetime and the version as nvarchar(max)
this is the code in the vb page .. Can you please tell me how to solve this problem?Imports System.Data.SqlClient
Imports system.web.configuration
Partial Class Admin_emag_insert
Inherits System.Web.UI.Page
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Record_DateTextBox.Text = DateTime.Now
End Sub
Protected Sub clearButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles clearButton.Click
Me.VersionTextBox.Text = ""
End Sub
Protected Sub addButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles addButton.Click
Dim objConnection As SqlConnection
Dim objDataCommand As SqlCommand
Dim ConnectionString As String
Dim record_date As Date
Dim version As String
Dim emagSQL As String
'save form values in variables
record_date = Record_DateTextBox.Text
version = VersionTextBox.Text
ConnectionString = WebConfigurationManager.ConnectionStrings("HRDBConnectionString").ConnectionString
'Create and open the connection
objConnection = New SqlConnection(ConnectionString)
objConnection.Open()
emagSQL = "Insert into E_Magazine (Record_Date, Version ) " & _
"values('" & record_date & "','" & version & "')"
'Create and execute the command
objDataCommand = New SqlCommand(emagSQL, objConnection)
objDataCommand.ExecuteNonQuery()
objConnection.Close()
AddMessage.Text = "A new emagazine was added successfully"
Me.VersionTextBox.Text = ""
End Sub
End Class
im trying to convert char (18) data type to decimal (18,6) but it wont let me do it. It gives an arithematic error. what would be other way to solve this problem. Can i do it with float if yes how so? or any other suggested way. Thanks
View 6 Replies View RelatedI would like to know how to translate a numeric value = 3 to a text or char value = 03.
Any input would be appreciated.
Thanks,
Joel
I am so frustrated, I have upsized a data base from access to sql 6.5 and now had to clip data to fit into a 255 field? I have been looking for weeks to find a solution for this.
I am writing a discussion board very much like this one and need the message text to hold more than 255 chars. I have tried to create a table with a blob and text, The text will not allow me to specify the size when creating from a script (ASP) using create table. If I dont specify a size, it creates it as 16?
Been working on this for several weeks and cannot locate anyone that can answer this question, I want to create a column that will hold more than 255 chars.
IS there something in Sql 6.5 that I need to set to allow more than 255 on a text field? What am I doing wrong?
Please respond. Thank you.
Mike
(you can see this board here www.454ss.com)
Thanks in adance
Platform: SQL 2000
A SQL table has a field named "pay-day" with Char(8) data type.
I tried to change its data type to datetime but only with an error message like this. I did right-click the table and tried to modify a data type.
- Unable to modify table.
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
The statement has been terminated.
Jay
update tblPact_2008_0307 set student_dob = '30/01/1996' where student_rcnumber = 1830when entering update date in format such as ddmmyyyyi know the sql query date format entered should be in mmddyyyy formatis there any way to change the date format entered to ddmmyyyy in sql query?
View 5 Replies View RelatedAfter testing out the application i write on the local pc. I deploy it to the webserver to test it out. I get this error.
System.Data.SqlClient.SqlException: The conversion of a char data type to a
datetime data type resulted in an out-of-range datetime value.
Notes: all pages that have this error either has a repeater or datagrid which load data when page loading.
At first I thought the problem is with the date, but then I can see
that some other pages that has datagrid ( that has a date field) work
just fine.
anyone having this problem before?? hopefully you guys can help.
Thanks,
Please help!!!We had a sql server 7 DB, with a char 8 field, in which some of thedata was only 7 characters in length.Via a type 4 JDBC driver, we got back a NON space padded String.This server got upgraded to sql server 2000. Now, via the type 4 JDBCdriver, we get a String padded field!!I understand there is a ODBC setting for ANSI padding on/off, but thetype 4 doesn;t use the OdBC-JDBC bridge...so configuration could beaffecting the data coming back?No one here can work out why. Any ideas?
View 1 Replies View RelatedAdvance thanks ....... My table is TimeSheet:----------------------------------- CREATE TABLE [dbo].[TimeSheet]( [autoid] [int] IDENTITY(1,1) NOT NULL, [UserId] [int] NOT NULL, [starttime] [datetime] NOT NULL, [endtime] [datetime] NOT NULL, [summary] [nvarchar](50) NOT NULL, [description] [nvarchar](50) NULL, [dtOfEntry] [datetime] NOT NULL, [Cancelled] [bit] NULL) ON [PRIMARY] My Query is------------------ insert into timesheet (UserId, StartTime,EndTime, Summary, Description,DtOfEntry) values (2, '19/04/2008 2:05:06 PM', '19/04/2008 2:05:06 PM', '66', '6666','19/04/2008 2:05:06 PM')i m not able to insert value Error Message is-------------------------Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated. can any body give any solution
View 5 Replies View RelatedHey, I have a big problem that i wanna search data from SQL by DateTime like thatselect * from test where recorddate='MyVariableWhichHoldDate'i use variable that holds Date info.i searched a lot infomation on net but there is no perfect solution. i know why this occur but there is no function to solve this problem. i used a lot of ways. it accept yyyy-mm-dd format but my variable format is dd-mm-yyyyy . is there any function for this problem? and any other solution.thanks for ur attentionregards
View 6 Replies View Related I am using Visual Studio 2005 and SQL Express 2005. The database was converted from MS Access 2003 to SQL Express by using the upsize wizard.
I would like to store the current date & time in a column in a table. This column is a smalldatetime column called 'lastlogin'.
The code I'm using is:
Dim sqlcommand As New SqlCommand _
("UPDATE tableXYZ SET Loggedin = 'True', LastLogin = GetDate() WHERE employeeID = '" & intEmployeeID.ToString & "'", conn)
Try
conn.Open()
sqlcommand.ExecuteNonQuery()
conn.Close()
Catch ex As Exception
MessageBox.Show(ex.Message)
End Try
This code works fine on my local machine and local SQL server. However at the client side this code results in the error as mentioned in the subject of this thread. I first used 'datetime.now' instead of 'getdate()', but that caused the same error. Then I changed the code to 'getdate()', but the error still remains.
The server at the client is running Windows Server 2000 UK . My local machiine is running WIndows XP Dutch.
Maybe the conversion from Dutch to UK has something to do with it. But this should be solved by using the 'Getdate()' function..... ?
I am trying to use the Bulk Insert Task to load from a csv file. My final column is a bit that is nullable. My file is an ID column that is int, a date column that is mm/dd/yyy, then 20 columns that are real, and a final column that is bit. I've tried various combinations of codepage and datafiletype on my task component. When I have RAW with Char, I get the error included below. If I change to RAW/Native or codepage 1252, I don't have an issue with the bit; however, errors start generating on the ID and date columns.
I have tried various data type settings on my flat file connection, too. I have tried DT_BOOL and the integer datatypes. Nothing seems to work.
I hope someone can help me work through this.
Thanks in advance,
SK
SSIS package "Package3.dtsx" starting.
Error: 0xC002F304 at Bulk Insert Task, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Error: 0xC002F304 at Bulk Insert Task 1, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Task failed: Bulk Insert Task 1
Task failed: Bulk Insert Task
Warning: 0x80019002 at Package3: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package3.dtsx" finished: Failure.
I need to send some long emails, problem is when I send a long body text CDO breaks up the message with spaces in the middle of words. I read on this forum the solution would be to insert CR/LF into the message so that CDO would not have to break it up at every 1k of text. I have tried using CHAR(13) as BOL suggests, but this is not doing as intended, it inserts a space and not the CR/LF I need.
Any suggestions how to insert CR/LF or why my installation is not responding to CHAR(13) is there some other escape code I could use?
Hi everyone!I am working with Delphi v7 and MS SQLServer.I am trying to insert data in a table with a SQL sentence. Some of thefields of my table are type char or varchar, and they can have nullvalues.¿What do i have to write in the SQL sentence to insert a null value inthose fields?I tried with '', an empty String, but it doesnt work, the tablesstores an empty String (logical :-)).In the SQLServer GUI you have to press CTRL + 0 to insert a NULLvalue, but how can i tell this to the SQLServer through a SQLSentence?Well, thank you very much.
View 2 Replies View RelatedHi,
I am trying to setup Trans Replication with updating subscriber on sql2000. One column on few tables got data with single quote (').
How do I handle in this case? Did any one come across such case?
Can I Change default QUOTED IDENTIFIER from ' (single quote) to something else (@@@) on SQL2000?
If yes, how to do?
Thanks
mka
Anyone know the origin of sql 2005's datatype naming convention or even why SSIS has defined its own special data types? (Before SSIS I had never seem types like DT_UI1 except in programming languages.)
TIA,
barker
Okay, this is probably my own stupidity but here goes. I am trying to make a very rudimentary package. I've got a data flow that has a flat file source. This source has fields delimited by the | symbol. I give the fields in the flat file source names. The first field is always exactly 1 character. When I use the advanced editor to look at the fields' properties, I see the first field, called ProductLine, is considered to be of SSIS internal data type DT_STR with a length of 50. I change the 50 to 1 because that is as long as that field is.
No matter what I do, when I close the advanced editor and then open it again, the field length for ProductLine is again set to 50. The field is 1 long, not 50 long. How can I make the setting of 1 be retained? Nothing I do changes it. What is the point of allowing the length to be editable if the edit is not retained?
Thanks in advance,
SW
I have a OLE DB Source going to a flat file destination. My source is a sql variable with "select * from tablename" which have varchar datatypes. Yet I'm getting trailing spaces at the end of some of my columns (for instance, my address column).
I've checked the data by doing a "select Max(Len(address)) from tablename" and the max is only like 34 chars, yet each of them have 100 chars total.
Taking a look at my flat file connection, the outputColumnWidth is 100, and datatype is string [DT_STR]. Am I crazy? What's the problem here? Is the DT_STR datatype the equivalent of char, and not varchar?
Any help, of course, will be appreciated.
Can anyone tell me how to convert a string variable to boolean
Ihave a variable named VarLoc which is string datatype
In expression I want to give condition like
VarLoc == "1234"?False:True
its giving error because of converting string datatype to boolean.
Please help.
Thank You
Our shop's DTS packages usually use ActiveX scripts to dynamically name vendor text file inputs by date (YYYYMMDD), which we load Monday through Friday to our databases. For our 2005 server I am trying to dynamically name a 'flat file source' filename in SSIS as described in the article at the url http://www.mssqltips.com/tip.asp?tip=1084.
I am writing the expression (DT_STR, 4,1252) YEAR(DATEADD( "dd",0, getdate() ) to create a variable named FileName to capture today's 4 character year. If I could get a good preview of this value I would concatenate the month and day strings to it and use the resultant variable as part of the fully qualifeid name.
For the variable I've marked the 'evaluateasexpression' true and put the value type as str. But when I preview this expression I get the error message, 'expression has the result type of DT_STR which can not be converted to a supported type.'
What supported type? Does anyone see what the problem is?
Hi, I am trying to derive a column from:
mm/dd/yyyy hh:mms.fff to dt_dbtimestamp as:
(dt_dbtimestamp)(colum_name,1, 23) when I include the period and three digits for milliseconds the package fails if I leave it out it is successfull. I need to include milliseconds for my datawarehouse project. I tried many different ways and always with failure
01/23/2007 12:23:15.234 is the date(example) derived: (dt_dbtimestamp)(column_name,1,23) fails
01/23/2007 12:23:15.234 is the date(example) derived: (dt_dbtimestamp)(column_name,1,19) succeeds
Thanks
The Lookup Transformation fails to match this datatype when full caching is enabled. When partial caching is activated (Edit > Advanced, Enable Memory Restrictions > Enable Caching) the lookup works.
This appears to be a bug to me.
Hi all I am trying to convert the string "(null)" in the [PASSWORD] column of my table to an actual NULL value. I have tried to use two different forms of a conditional operator to achieve this end. However I am getting the below errors both can be summed up with the following statement.
DT_STR operand cannot be used with the conditional operation. The expression directly below however is using a type DT_I4 in the conditional clause as this is what FINDSTRING returns. Hence the equivalencey test to the literal integer 0. So I must say I am somewhat confused by this. Does anyone know why neither of the below statements are working?
Also is there an easy way to accomplish what I am trying to do - convert the string "(null)" in the [PASSWORD] column of my table to an actual NULL value?
FINDSTRING([PASSWORD], "(null)", 1) == 0 ? [PASSWORD] : NULL(DT_STR, 255, 1252)
Error at Administrator Data Flow Task [Derived Column [1985]]: For operands of the conditional operator, the data type DT_STR is supported only for input columns and cast operations. The expression "FINDSTRING(PASSWORD,"(null)",1) == 0 ? PASSWORD : NULL(DT_STR,255,1252)" has a DT_STR operand that is not an input column or the result of a cast, and cannot be used with the conditional operation. To perform this operation, the operand needs to be explicitly cast with a cast operator.
LOWER( TRIM( [PASSWORD] ) ) != "(null)" ? [PASSWORD] : NULL(DT_STR, 255, 1252)
Error at Administrator Data Flow Task [Derived Column [1985]]: For operands of the conditional operator, the data type DT_STR is supported only for input columns and cast operations. The expression "LOWER(TRIM(PASSWORD)) != "(null)" ? PASSWORD : NULL(DT_STR,255,1252)" has a DT_STR operand that is not an input column or the result of a cast, and cannot be used with the conditional operation. To perform this operation, the operand needs to be explicitly cast with a cast operator.
Hi,
alter PROCEDURE [dbo].[PPUpdateIWDetails]
(
@CompanyID NVARCHAR(36),
@DivisionID NVARCHAR(36),
@DepartmentID NVARCHAR(36),
@ItemID NVARCHAR(36),
@OrderNo NVARCHAR(36),
@LineNo NVARCHAR(36),
@TAllotedQty Numeric,
@EmployeeID NVARCHAR(36),
@Trndate datetime
)
AS
BEGIN
By default iam passing 12 char itemid as parameter...
Here iam selecting the itemid from InventoryLedger -if it is 8 char than this query should be executed
IF EXISTS(SELECT ItemID FROM InventoryLedger WHERE TransDate=@Trndate AND ItemID=@ItemID AND ILLineNumber =@LineNo AND TransNumber=@OrderNo AND TransactionType='Production' AND CompanyID=@CompanyID AND DivisionID= @DivisionID AND DepartmentID=@DepartmentID)
BEGIN
DECLARE @Qty INT
select @Qty =QUANTITY from inventoryledger WHERE TransDate=@Trndate AND ItemID=@ItemID AND ILLineNumber =@LineNo AND TransNumber=@OrderNo AND TransactionType='Production' AND CompanyID=@CompanyID AND DivisionID= @DivisionID AND DepartmentID=@DepartmentID
select qtyonhand=qtyonhand+@Qty from InventoryByWareHouse where ItemID=@ItemID
END
Here iam selecting the itemid from InventoryLedger -if it is 12 char than this query should be executed(both queries are same)
IF EXISTS(SELECT ItemID FROM InventoryLedger WHERE TransDate=@Trndate AND ItemID=@ItemID AND ILLineNumber =@LineNo AND TransNumber=@OrderNo AND TransactionType='Production' AND CompanyID=@CompanyID AND DivisionID= @DivisionID AND DepartmentID=@DepartmentID)
BEGIN
DECLARE @Qty INT
select @Qty =QUANTITY from inventoryledger WHERE TransDate=@Trndate AND ItemID=@ItemID AND ILLineNumber =@LineNo AND TransNumber=@OrderNo AND TransactionType='Production' AND CompanyID=@CompanyID AND DivisionID= @DivisionID AND DepartmentID=@DepartmentID
select qtyonhand=qtyonhand+@Qty from InventoryByWareHouse where ItemID=@ItemID
END
My process return a date in char format like "3/12/1998",
How could I put this data ( in char ) directly to date ISQ Server field ?
Thank's
I'm doing a data conversion project, moving data from one SQL app toanother.I'm using INSERT INTO with Select and have the syntax correct. But whenexecuting the script I get:Server: Msg 8114, Level 16, State 5, Line 1Error converting data type varchar to float.Is it possible to change the data type during the INSERT INTO statement?Thanks
View 3 Replies View RelatedHi
I'm trying to put together a integration package that loads in type 1 dimensional data. If the item is new then the data is inserted if it already exists then it is overwritten. My approach has been to use the lookup operator to match the source values against a generic mappings table. The data that is matched goes off into the error flow and is inserted as new rows in the dimension table. The matched lookup rows are sent through into an update operator. the problem comes when there are no new rows for the lookup operator to find it still want to do the inserts and so exits with an error code.
I tried to change the data flow so that it uses and outer join and conditional split to decide what rows are matched and what are new, however when there are no new rows it reaches the inserts and exits with an error again.
Is containing the logic for insert and update in the one data flow a poor approach? should the conditional processing logic be placed in the control flow?
For the Oracle people out there all I'm trying to do is a MERGE!!! there must be an easier way
Cheers
Al
I can not insert CURRENT_TIMESTAMP into column type timestamp
I defined a data Table that has column type timestamp.
I did not achieve insert CURRENT_TIMESTAMP data into column typed timestamp.
My statement is below.What is wrong with it? Thanks
set @cmdS2 = 'Insert Into TABLOLAR Values(' + CHAR(39) + @TABLO + CHAR(39) + ',' + CHAR(39) + @TABLO_ACIKLAMASI + CHAR(39) + ',' + CHAR(39) + CURRENT_TIMESTAMP + CHAR(39) + ',' + CHAR(39) + @KLLNC + CHAR(39) + ')'
I am getting a type mismatch error when I do a bulk insert.---Begin Error Msg---Server: Msg 4864, Level 16, State 1, Line 1Bulk insert data conversion error (type mismatch) for row 1, column 14(STDCOST).---End Error Msg---The STDCOST is set to decimal (28,14) and is a formatted in Access as anumber, single with 14 decimal. I don't know why I would be getting a TypeMismatch error.Any idea?Mike
View 4 Replies View RelatedHiya, last one (for a while), I swear. I'm getting the hang of this now (famous last words).
I've got a data file saved as an image type in my SQL Mobile database,
and I'm trying to send it over to my SS2005 Server via RDA, which seems
the simplest way possible. The application will only have
periodic rows to send over and insert into the Server's DB, so it seems
like doing a merge or a push is unnecessary overhead.
Is there some way to include parameters in the SQL string argument to
the method SubmitSQL? Or, embed the byte array into the SQL string? For
the life of me, I can't figure out how to do this.
So, if column data has type image, my statement would look like what?
string sSQL = "INSERT INTO sensor_stream (data) VALUES (what goes here?)";
rda.SubmitSql(SQL, strSQLConn);
.....
I've seen the solution being able to assign the image by using
parameters, but it seems that solution is not an option in this case?
Thank you in advance for your time and effort, I appreciate any and all help very much.
-Dana