Hi,
What's the 'new' declarative way to fetch one field from a SQL table and display the result in a Label control?
I have a users table with a fullname field. I want to query the table and retrieve the fullname where the usertable.username = Session("loggedinuser")
I can make the SqlDataSource ok that has the correct Select query, but not sure how to bind the label to that.
thanks,
Bruce
how can i display the result of an asp:SqlDataSource into a lable control.the sqldatasource returns the count for some thing ie "select count(*) as total from tbl"please help
View 1 Replies View RelatedHi every experts
I have a exist Stored Procedure in SQL 2005 Server, the stored procedure contain few output parameter, I have no problem to get result from output parameter to display using label control by using SqlCommand in Visual Studio 2003. Now new in Visual Studio 2005, I can't use sqlcommand wizard anymore, therefore I try to use the new sqldatasource control. When I Configure Datasource in Sqldatasource wizard, I assign select field using exist stored procedure, the wizard control return all parameter in the list with auto assign the direction type(input/ouput....), after that, whatever I try, I click on Test Query Button at last part, I always get error message The Query did not return any data table.
My Question is How can I setup sqldatasource to access Stored Procedure which contain output parameter, and after that How can I assign the output parameter value to bind to the label control's Text field to show on web?
Thanks anyone, who can give me any advice.
Satoshi
Hi all,I would like to do something I thought was simple but I can't seem to figure it out. I would like to bind the Text properties to two labels to the columns in an SqlDataSource, much the same as you can bind a listbox to a SqlDataSource.Is this possible?The reason why I'm trying it this way is because I originally used an OleDB connection and datareader, but it doesn't seem to work on our service providers server (keeps saying that it can't find the database) even though it works on the four other server's I've tried. It definitely connects to the database when I use the SqlDataSource on a listbox control, but it fails when I use the same connection string with the OleDB connection.Is this the best way to go about it, or should I persist with finding the OleDB/datareader (the service provider has been no help at all). Thanks.
View 1 Replies View RelatedHi, Im trying to pull data from 2 fields in the same table into a SqlDataSource that feeds into a GridView, and display them as 1 field in GridView? I have a database table that has entries of users and their friends. so
this tblFriendUser has a column called UserName and another column
called FriendUserName.
I am trying to get a list of friends for that particular user. Note
that if User1 initiated the friend request, he will be listed as
UserName and his friend as FriendUserName, but if his friend initiated
the friend request, it will be vice versa: him being the FriendUserName
and his friend the UserName. So I want the following 2 queries run and merged into
one query in order to return 2 columns only: UserFriendID & UserName, is that
possible? Is my design bad? Any suggestions/advice would help! Thanks a lot!
SELECT UserFriendID, UserName
FROM tblUserFriends
WHERE (UserName = @UserName);
SELECT UserFriendID, FriendUserName AS UserName
FROM tblUserFriends
WHERE (FriendUserName= @UserName);
I am not sure If I can do this with a lookup, but what I would like todo is perhaps use lookup to retrieve a control date from anunassociated table to control what date is entered in another table.For example :the main table , table 1 has many entries with a field called date_enter which is the date the record was entered.table 2 has a control_dateIf the date entered in table 1 is less than or = to the control date wewant to give the user a error message.I am thinking of using display only field and lookup to set itWould need to have the date value from the control table available tothe active table of table 1 when entering the the date_enter.However as there is no join field between the two tables am not surehow to do it. Was thinking might have to add a key field that wasallways null and in the BEFORE EDITADD EDITUPDATE section set it sothat the key would be nullAm using Informix 5 , Any help would be apprecia
View 3 Replies View RelatedIm ripping my hair out here.I need to access the field in a datasource control of use in non presentation layer code based actions.I know the I can use a code base connection and query but I dont see why i need to make two trips the the DB when the info is already available.The datasource is attached to a details view control and the details view control is nested in a loginview controlI've tried defining but all I can get in the header name of the field but not the dataitem, the dataitem causes an error help please jim
View 4 Replies View RelatedHi can anyone tell meHow to bind messages in storedproc to lable control in the front end.I have a stored proc which updates the data table.in certain condition update should not take place and a message should be generated that update did not take place.Can anyone tell me how that message can be shown in front endmy taught was to bind it using lable control. But how the messages can come from storedproc to front endcan we do it using dataset binding.Is there any other way please lemme know immediately .Thankyousiri
View 4 Replies View RelatedHi all
I want to show two values in one cell.is it possible.
I need to display number and percentage in one cell
Like ---- Number and percentage in Brakets.
10 (20%)
How can i do it?
Pls help me
My code behind file builds a select statement and I would like to fill an SqlDataSource control with it. Can some show me an example of how I might do that? Maybe something like this?
Me.SqlDataSourceSearchResult.ConnectionString = "ConnectStr"
Me.SqlDataSourceSearchResult.SelectCommand = "SelectStatement"
gvSearchResult.DataSource = Me.SqlDataSourceSearchResult
gvSearchResult.DataBind()
I use SQLDataSource, bind to a GridView and a SelectParameter that gets it's value from a textbox. If the textbox is empty, then it returns all rows.How do I prevent the query and binding when the page first load? Thanks
View 11 Replies View RelatedI have a sql data source that runs a query that returns a users data (See below). I want to set the session variable "UserID" equal to the tkinit. How do I "bind" the session to a column from this select command? I tried this Session("UserID") = ("tkinit") but that doesn't work. I can hard code a session value, just can't figure out how to "bind" it from the sqldatasource..
<asp:SqlDataSource ID="getUserID" runat="server" ConnectionString="<%$ ConnectionStrings:xxxConnectionString %>" SelectCommand="SELECT [tkinit], [tklast], [tkfirst], [tkfirst]+' '+[tklast] as fullname FROM [yyy] WHERE ([login] = @login)"><SelectParameters><asp:Parameter Name="login" Type="String" /></SelectParameters></asp:SqlDataSource>
i have to display some of my SQL data on a webpage, and i don't want to use the gridview and all his "friends". all i want is to display some values out of the sqlDataSource on my webpage.is it possible? and if so, then how can i do it?thanks in advance.
View 3 Replies View RelatedA SQL Server 2005 stored procedure expects a parameter UserID depending upon which it retrieves the no. of records & OrderIDs corresponding to the UserID from a DB table (note that OrderID & UserID are two of the columns in the DB table). So for e.g. consider a user whose UserID=6 & the DB table has 3 records where UserID=6. In other words, there are 3 OrderID records of the user whose UserID=6, say, OrderID=8, OrderID=17 & OrderID=29. The stored procedure will finally return 2 columns - the OrderCount (which is 3 for UserID=6) & the OrderID (which will be 8, 17 & 29 for UserID=6). This is the stored procedure:ALTER PROCEDURE dbo.OrderCount @UserID intASDECLARE @OrderCount intSET @OrderCount = (SELECT COUNT(OrderID) FROM NETOrders WHERE UserID= @UserID)SELECT @OrderCount AS OrderCount, OrderIDFROMNETOrdersWHEREUserID = @UserIDIn a VB class file, I am invoking the stored procedure in a function named GetOrderCount which returns a SqlDataReader back to the calling ASPX page. I want the ASPX page to display the 3 OrderIDs of UserID=6 in a Label control. Unlike the DataBinding controls like DataList, DataGrid, Repeater controls, the Label control will not automatically loop through the recordset. So I tried to accomplish this using a For....Next loopDim i As IntegerDim sqlReader As SqlDataReaderiUserID = Request.Cookies("UserID").Value'ShopCart is the name of the class in the VB class fileboShopCart = New ShopCartsqlReader = boShopCart.GetOrderCount(iUserID)While (sqlReader.Read) If (sqlReader.GetValue(0) > 1) Then pnlLinks.Visible = True For i = 1 To sqlReader.GetValue(0) lblLinks.Text = sqlReader.GetValue(1)(i) Next i Else pnlLinks.Visible = False End IfEnd WhileBut this generates the following error:No default member found for type 'Integer'.pointing to the linelblLinks.Text = sqlReader.GetValue(1)(i)in the above shown ASPX code. Can someone please correct me & suggest how do I loop through the recordset so that I can display the records in a Label control?
View 8 Replies View Relatedhello friends iam newlly joined in to company any one can help me how to bind individual controls to a single SqlDataSource Control..
my problem is "i have different text boxes and dropdown boxes and what i want to do is if i enter primary ker field(employeeno) in the text box automatically i need to get that particular record and i need to populate it to the Respective controls...
is there any chance of doing this by using a single datasource control..
pls help me its urgent
Regards
k.seshu
Hi,Just a little question...Is it possible to link a SqlDataSource to a label without using a repeater or a formview?I just want to select one column from a single row in a single table and sending the value to a label.The code would be something like this :<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:MyConnectionString %>" SelectCommand="SELECT name FROM Page WHERE idPage = 1">
<SelectParameters>
<asp:Parameter DefaultValue="1" Name="idPage" Type="Int32" />
</SelectParameters>
</asp:SqlDataSource>
<asp:Label ID="Label1" runat="server" Text='<%# Eval("name") %>'></asp:Label> So, what can I add in the label properties or in the codefile to make this work if it is possible ?Or am I obliged to "hard code" it in c# with an SqlConnection, a SqlCommand and a SqlDataReader ?Thanks in advance...
This is my SQLDataSource for my gridview
<asp:SQLDataSource ConnectionString="<%$ ConnectionStrings:Pubs %>" id="sqlProducts" Runat="Server" SelectCommand=' "Select * from adressen INNER JOIN Adressoort ON adressen.AD_ID = Adressoort.AD_ID where " & lblsql.Text ' ></asp:SQLDataSource>
the label is something like : adressoort.AD_soort = '3' or adressoort.AD_soort = '1'
I keep on getting the error sever tag not well formed
Hi,
I have a sqldatasource which returns the result I want, but I need to assign it to a label or text box. Is there an easy way of doing this? I attempted it using this code:
PropertyFriendIDLabel.Text = PropUserIdSqlDataSource
Thanks
Greetings all,
I am tring to capture the ID of a newly inserted record from a form to a label that I will reference in a reciept page. I intend to pass the rowid to retrieve record information on other pages.
The insert suceeds... I just need to capture the auto generated ID for the new row to a label on the page post onclick. Any thoughts?
Dim MySQL As String = "Insert into dropkick (name, status, payroll, unit, contactnumber, email, equipment, issue, timein) values (@name, @status, @payroll, @unit, @contactnumber, @email, @equipment, @issue, @timein)"Dim myConn As SqlConnection = New SqlConnection(SqlDataSource1.ConnectionString)
Dim Cmd As New SqlCommand(MySQL, myConn)Cmd.Parameters.Add(New SqlParameter("@payroll", txt_payroll.Text))
Cmd.Parameters.Add(New SqlParameter("@name", txt_name.Text))Cmd.Parameters.Add(New SqlParameter("@status", "W"))
Cmd.Parameters.Add(New SqlParameter("@unit", txt_dept.Text))Cmd.Parameters.Add(New SqlParameter("@contactnumber", txt_cell.Text))
Cmd.Parameters.Add(New SqlParameter("@email", txt_email.Text))Cmd.Parameters.Add(New SqlParameter("@equipment", txt_equipment.Text))
Cmd.Parameters.Add(New SqlParameter("@issue", txt_issue.Text))Cmd.Parameters.Add(New SqlParameter("@timein", lbl_datetime.Text))
myConn.Open()
Cmd.ExecuteNonQuery()
Label1.Visible = "true"
Page.DataBind()
myConn.Close()
Label1.Text = "Your data has been received!"
''LABEL TO BE POPULATED WITH ID OF NEW RECORD
lbl_id.Text = ID
Hello.
I have a multi value parameter in my report.
I want to know how can I display all of the selected values in this parameter in a text box.
Whan I try to use this parameter in a textBox it automaticly take the value:
Parameter.param.Value(0) Whice take only the first select value.
Is there a simple way of doing it?
Thanks.
I have two parameters: year and month. The Month parameter includes All, 1, 2, ect..
I tried to display the parameter slected with the following expression:
=IIf(Parameters!DateShippedMonth.Label="All",Parameters!DateShippedMonth.Label,
MonthName(Parameters!DateShippedMonth.Label)) & ", " & Parameters!DateShippedYear.Label
I want it to either display the label (All) or the name of the month. I get an error when All is the parameter selected but not when any month is selected. If I removed the MonthName() function, I don't get an error but I also don't get the month name.
Any ideas?
I have a SQL database with 1 column in it.. it is a do not call registry for my office. I want to make a web application so our leads can go on the web and request to be put on the do not call list. problem is, if their number already exists, it gets a violation of primary key... Normal handling for this would be to do a select query based on user input, and if it exists in the database, tell them that, else do the insert query... Problem is, i cant seem to figure out how to bind the result of the select query to a textbox or label so i can compare the results to do that logic. Any ideas? This is in asp .net 2.0. Thanks! -Dan
View 5 Replies View RelatedBelow is code for inserting data into the database that I know works, so I thought if I replace "Insert" with "Select" I could retrieve a specific row from my database and present it in a label or text box but nothing happened. How can I retrieve a row or rows from a database using vb code and display it in a textbox? I'm using visual web developer 2008 which is similar to 2005.
Thank you.
Dim UserDatasource As New SqlDataSourceUserDatasource.ConnectionString = ConfigurationManager.ConnectionStrings("ASPNETDBConnectionString1").ToString()
UserDatasource.InsertCommandType = SqlDataSourceCommandType.Text
UserDatasource.InsertCommand = "insert into table1 (Username, comments, points,totalpoints, ipaddress, datatimestamp) values (@Username, @comments, @points,@totalpoints, @ipaddress, @datatimestamp)"
UserDatasource.InsertParameters.Add("username", Context.User.Identity.Name)
UserDatasource.InsertParameters.Add("comments", txtSearch.Text)UserDatasource.InsertParameters.Add("points", points)
UserDatasource.InsertParameters.Add("ipaddress", Request.UserHostAddress)UserDatasource.InsertParameters.Add("datatimestamp", DateTime.Now())
Dim rowaffected As Integer = 0
Try
rowaffected = UserDatasource.Insert()MsgBox("Thanks for the post", MsgBoxStyle.OkOnly, "Post Executed")
txtSearch.Text = ""Catch ex As Exception
MsgBox("Please sign in or sign up to post comment", MsgBoxStyle.OkOnly, "Login Error")
End Try
Hi all,
I have three textboxes in a form view
1- Qty textbox
2- price textbox
3-TotalPrice textbox which value is the result of multiplying the previous two values
and then I want to Bind() the third value to the totalprice field in the database
how can I do that??
(without making the database field as a computed column)
thanks for any help
What is the vb.net syntax to bind data from a sqldatasource to a hidden field in a form?
View 6 Replies View Relatedi am trying to search an SQL database to retrieve all names from employee table who have a birthday today. this needs to automatically fill in the date parameter with the system date. this is what i have so far:
sub page_load(sender as object, e as eventargs)
dtmDate=DateTime.Now.ToString("M")
con = New SqlConnection("Server=Localhost;UID=******;PWD=*****;Database=Pubs")
cmd = New SqlCommand("Select fname, lname From Employee where dob='& dtmDate'", con)
con.open()
dtrBday = cmd.ExecuteReader()
rptBday.DataSource=dtrBday
rptBday.DataBind()
dtrBday.Close()
I know this isnt quite right. i get errors when it hits my repeater.
the error i am getting is :Syntax error converting string to smalldatetime data type.
if someone could give me a push in the right direction here it would be greatly appreciated.
Hi there,
I am trying to fill a Textbox with the Label-Field from the Report Parameters. The Multi-Value-Option is checked and it is possible to select multi-values from the time hierarchy [Time].[Year - Half Year - Quarter - Month].
For example you can choose:
"Calendar 2007" ([Time].[Year - Half Year - Quarter - Month].[Year].&[2007-01-01T00:00:00])
"Quarter 4, 2006" ([Time].[Year - Half Year - Quarter - Month].[Quarter].&[2006-10-01T00:00:00])
and "April 2006" ([Time].[Year - Half Year - Quarter - Month].[Month].&[2006-04-01T00:00:00])
Now I want to fill a Textbox with the chosen parameter values by putting following expression as value of the textbox:
Parameters!TimeYearHalfYearQuarterMonthDate.Label ... with "TimeYearHalfYearQuarterMonthDate" as the name of the DataSet.
That gives an Error.
Can you please help me out?
Best regards
Claudio
please explain selectparameters and conflict detection property within sqldatasource control
mohsen
hi friends,
I created sqldatasource control. In select command i written the query like this "select * form emp" and bounded in grid.How can I change the query for searching the details according the date wise when i click the search button.
Hello experts
i have a SqlDataSource Control on my web form. Here is the source for the control
<asp:SqlDataSource ID="sqlSearchDataSource" runat="server" ConnectionString="<%$ ConnectionStrings:DbefomsConnectionString %>"
SelectCommand="SELECT [icon], [file_name], [path] FROM [tblfile] WHERE ([file_name] = @file_name)">
<SelectParameters>
<asp:ControlParameter ControlID="txtSearch" DefaultValue="0" Name="file_name" PropertyName="Text"
Type="String" />
</SelectParameters>
</asp:SqlDataSource>
This control displays icon, file_name, path in GridView Control
The problem is How can i store the above field values in an asp.net variable.
Thanks
Regards
Ali
Do you have to use the sqldatasource in conjuction with another control like gridview or dropdown list?
I'd like to check to see if a record exists in one table before inserting data into another.
thanks
Hello.I'm new to ASP.NET and trying to write data to a Microsft SQL Server. I have created a SqlDataSource control, which is 'connected' to my SQL server.Now my question is how i can put data in the database throw the control, and read data from it. I've read the site, but it's still unclear for me..Greetings!
View 1 Replies View RelatedHow do you set a timeout for an SqlDataSource control?
View 1 Replies View Related