Cannot Create New Subscription
Apr 18, 2008
I get rsInternalError...
It used to work, but I noticed that my existing email subscriptions stopped working around November...I only have a few...no one complained until now. We also just finished migrating to Exchagne 2k7. I changed the smtp settings in SSRS and the existing subscriptions seem to be mailing again.(one came today to a user who commented on it)(The email subscription issue is probably a totally separate issue related to major config changes in our mail routing etc.)
However, I cannot create any new subscriptions without getting an error. I'm not sure when it started(maybe after SP2?)...a user complained that they could run reports but couldn't generate a PDF for a long running report >15 mins at least and I started investigating the issue.
I looked on some lists and did notice that the SSRS account was not a in the MASTER and MSDB RSExecRole. The role existed in both dbs, but the account wasn't added...not sure if it ever was or if something changed...it is added now. I've restarted the server, etc.
The log entries include(what's kind of weird is that the security log is clean, using windows auth only on sql server, audit failed logins, but tracing the errors below says something about an access denied on 'xp_sqlagent_notify'
Application Log:
Event ID: 108 Report Server (MSSQLSERVER) cannot load the Report Server DocumentLibrary extension.
ReportServer____...Log
w3wp!library!1!04/18/2008-14:53:21:: Call to GetSystemPermissionsAction().
w3wp!library!6!04/18/2008-14:53:21:: Call to GetPermissionsAction(/Microsoft Operations Manager Reporting/Microsoft Windows Base Operating System/Disk Performance Analysis).
w3wp!library!6!04/18/2008-14:53:21:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException: The operation is not supported on a report server that runs in native mode., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException: The operation is not supported on a report server that runs in native mode.
w3wp!extensionfactory!6!04/18/2008-14:53:21:: e ERROR: Exception caught instantiating Report Server DocumentLibrary report server extension: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.TypeInitializationException: The type initializer for 'Microsoft.ReportingServices.SharePoint.SharePointDeliveryExtension.DocumentLibraryProvider' threw an exception. ---> Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException: The operation is not supported on a report server that runs in native mode.
--- End of inner exception stack trace ---
--- End of inner exception stack trace ---
at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandle& ctor, Boolean& bNeedSecurityCheck)
at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean fillCache)
at System.RuntimeType.CreateInstanceImpl(Boolean publicOnly, Boolean skipVisibilityChecks, Boolean fillCache)
at System.Activator.CreateInstance(Type type, Boolean nonPublic)
at System.RuntimeType.CreateInstanceImpl(BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes)
at System.Activator.CreateInstance(Type type, BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes)
at Microsoft.ReportingServices.Diagnostics.ExtensionClassFactory.CreateExtensionObject(Extension extConfig).
w3wp!library!5!04/18/2008-14:53:21:: Call to GetReportParametersAction(/Microsoft Operations Manager Reporting/Microsoft Windows Base Operating System/Disk Performance Analysis).
w3wp!library!5!04/18/2008-14:53:22:: Call to ListSchedulesAction().
w3wp!library!5!04/18/2008-14:53:22:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. ---> System.Data.SqlClient.SqlException: The EXECUTE permission was denied on the object 'xp_sqlagent_notify', database 'mssqlsystemresource', schema 'sys'.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
ReportServerWebApp____...log
w3wp!library!5!4/18/2008-14:52:53:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to default value of 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' because it was not specified in Configuration file.
w3wp!library!5!4/18/2008-14:52:53:: i INFO: Initializing SecureConnectionLevel to default value of '1' because it was not specified in Configuration file.
w3wp!library!5!4/18/2008-14:52:53:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!5!4/18/2008-14:52:53:: i INFO: Initializing WebServiceUseFileShareStorage to default value of 'False' because it was not specified in Configuration file.
w3wp!extensionfactory!7!4/18/2008-14:53:22:: w WARN: The extension Report Server Email does not have a LocalizedNameAttribute.
w3wp!extensionfactory!7!4/18/2008-14:53:22:: w WARN: The extension Report Server FileShare does not have a LocalizedNameAttribute.
w3wp!ui!7!4/18/2008-14:53:22:: e ERROR: System.Web.Services.Protocols.SoapException: An internal error occurred on the report server. See the error log for more details. ---> Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. ---> System.Data.SqlClient.SqlException: The EXECUTE permission was denied on the object 'xp_sqlagent_notify', database 'mssqlsystemresource', schema 'sys'.
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.ListSchedules(String Site, Schedule[]& Schedules)
at Microsoft.ReportingServices.WebServer.ReportingService2005.ListSchedules(Schedule[]& Schedules)
w3wp!ui!7!4/18/2008-14:53:22:: e ERROR: HTTP status code --> 200
-------Details--------
System.Web.Services.Protocols.SoapException: System.Web.Services.Protocols.SoapException: An internal error occurred on the report server. See the error log for more details. ---> Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. ---> System.Data.SqlClient.SqlException: The EXECUTE permission was denied on the object 'xp_sqlagent_notify', database 'mssqlsystemresource', schema 'sys'.
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.ListSchedules(String Site, Schedule[]& Schedules)
at Microsoft.ReportingServices.WebServer.ReportingService2005.ListSchedules(Schedule[]& Schedules)
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.SqlServer.ReportingServices2005.ReportingService2005.ListSchedules()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ListSchedules()
at Microsoft.ReportingServices.UI.SharedScheduleDropDown.EnsureSchedulesAreLoaded()
at Microsoft.ReportingServices.UI.SharedScheduleDropDown.SharedScheduleDropDown_Load(Object sender, EventArgs e)
at System.Web.UI.Control.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
View 1 Replies
ADVERTISEMENT
Jan 24, 2007
Hi, I have a report that I would like to send out to users automatically every day at 10AM. For some reason on reporting server under the report I would to email, I see 3 folders...Data Source, History & Subscription but I am not able to click on "New Subscription" option in order to create new subscription.
First I created "Shared Schedule" specifing day, time etc information. And then I am tring to create Subscription but the option is disabled.
Is there any service pack I am missing or I am following the wrong procedure.
Please advice.
- Payal
View 1 Replies
View Related
May 20, 2008
When clicking New Subscription (or Manage Shared Schedules) I get the following error:
An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help
For more information about this error navigate to the report server on the local server machine, or enable remote errors
I can't find any information about this error. Does anyone know what is wrong?
View 13 Replies
View Related
May 15, 2007
Hello,
I am curious if you can create a subscription for a report that resides on reports manager with a dynamic date? We have a couple of reports on reports manager that require a date value and I tried to use getdate() for the value but it will not except it. Is there a way to have a subscription do something like this so the end user doesn't have to change the date parameter each time? Thanks in advance.
John
View 4 Replies
View Related
Dec 4, 2005
When creating a subscription, if there is an error detected at the end - it creates the subscription but might not create the sql agent job, and it doesn't give you a chance to correct the error.
View 3 Replies
View Related
Nov 17, 2006
Hi,
I'm using SQL Server 2005 Developer Edition, which I understand supports Data-driven subscriptions (DDS).
When I try and click on on the DDS button for a report I get the following message:
"Data-driven subscriptions cannot be created because the credentials used to run the report are not stored, the report is using user-defined parameter values, or if a linked report, the link is no longer valid."
1. I have set the data source to use stored credentials.
2. I'm using one simple string parameter
3. Its not a linked report
Any ideas?
regards,
avner
View 15 Replies
View Related
May 1, 2006
I have been following Creating a Mobile Application with SQL Server Mobile:
http://msdn2.microsoft.com/en-us/library/ms171908.aspx
I have successfully created the snapshot.
When performing the following:
Configure the publication for Web synchronization
In SQL Server Management Studio, in Object Explorer, expand the (local) computer node.
Right-click the Replication folder, and then choose Configure Web Synchronization
There is no option when Right-clicking the Replication folder under my local server, however there IS an option for Configuring Web Synchronization on the Replication folder under SQL Server Mobile. (Unfortunately the Configure the publication for Web Synchronization is listed BEFORE the SQLServer Mobile Task, so it is pretty confusing) So, assuming this is what the author meant, I successfully configured the Web Server and the SQLMobile shows under my default web site.
When I attempt to create a Subscription under SQLServer Mobile, I get the following error:
- Synchronizing Data (Error)
Messages
Unexpected HTTP status returned. [ 415,status = ]
HRESULT 0x80004005 (28632)
The operation could not be completed.
Am I missing something? Should the web configuration be done on my local SQL Server, not the SQLServer Mobile replication directory? If so, how come I do not have that option as suggested in the directions?
I have checked and rechecked permissions. As I mentioned, the snapshot is successfully created (verified by Right-clicking the publication and viewing the snapshot agent status)
View 9 Replies
View Related
Jun 14, 2007
I am running SQL Server 2005 Reporting Services. I created a subscription delivered by "Report Server File Share" and the UNC path points to a share on a Netware server. I get the following error when the schedule runs:
Failure writing file Completed.pdf : The network path was not found
The UNC path is \rmh5vol1deptimsoperhiscommon.
I can create the same subscription, but have it write to a Windows file share and everything works fine.
Does SQL Server 2005 Reporting Services support writing to a Netware share?
View 3 Replies
View Related
Apr 7, 2008
I deployed a report I created to Reporting Services using Management Studio. From here I could create subscriptions, if I choose. I created a linked report in a different folder from the original report. I defined all the parameters for this linked report. I cannot create subscriptions for the linked report - the context menu items are grayed out.
Anyone know why this might be happening and what I can do to correct it?
View 1 Replies
View Related
Sep 13, 2006
The title says it all. You can do it from a ADO.Net client so why not from TSQL.
It all uses the service broker stuff so why not?
View 5 Replies
View Related
Oct 12, 2015
Merge replication fails on one node with error. The merge process could not update the list of subscriptions.
(Source: MSSQL_REPL, Error number: MSSQL_ REPL-2147201010)
Cannot insert duplicate key row in object 'dbo.sysmergepublications' with unique index 'nc1sysmergepublications'.
The duplicate key value is . (Source: MSSQLServer, Error number: 2601)The subscription could not be created.
(Source: MSSQLServer, Error number: 14057) works fine on other subscribers.
View 4 Replies
View Related
Oct 19, 2015
We migrated ssrs from 2008 to ssrs 2014.after that we need to move only subscriptions to New 2014 report server DB.
How to proceed that.
I am trying to insert record in DB. But subscription ID is not identity column. How to do this.
Can I place old Subscription IDS in New 2014 reporting DB?
View 2 Replies
View Related
Feb 11, 2008
It seems to me that if a scheduled SSRS report subscription fails ( Status Message - An error has occurred during report processing) , that I actually need to delete the subscription and reconfigure it from scratch. The scheduled job doesn't try to run again automatically (say the next Monday on a weekly Monday schedule).
Is there a way to "reset" a failed subscription without have to recreate the entire subscription?
Thank you
Devon Kyle
View 5 Replies
View Related
Sep 26, 2007
28638
SSCE_M_DUPLICATETABLE
Existing subscription already contains table included in the new subscription.
What are the possible causes of this merge replication error?
Could it be caused by a SQL Server Compact Edition User trying to sync their .sdf file after their subscription has already expired on the SQL Server?
Would you expect to see a different message if a SQL Server Compact Edition user tried to sync a subscriber database (.sdf file) with merge replication if it's been longer than the subscription retention period since their last sync?
View 6 Replies
View Related
Jul 2, 2007
Hi,
We are migrating our reporting services database from one server to another.
What needs to be done to subscriptions to ensure they work properly. Will they automatically update as part of the migration, or is there a manual process.
We are using Reporting Services 2000 and will be using Reporting services 2000 as well on the new server.
Thanks
View 1 Replies
View Related
Nov 7, 2007
Hi all,
I'm creating data driven subscription for parameterized reports. I'm supposed to deliver one report to six different customers. But each customer can see only his own data in the report. This is not a problem. But the problem is I need another report in which all the data can be seen. When I create DD subsription, I chosed Auto increment option for the write mode under "
Specify delivery extension settings for Report Server FileShare" .
But then it creates seperate report for each parameter value. But it does not create the report which contains all the data for all parameter values. How can I make it without creating another report.
Also when I use overwrite option instead of Auto Increment, It creates only one reports. Does any one know why it happens?
Thanks
View 1 Replies
View Related
Dec 7, 2006
Hello,
is it possible to make a new subscription remote over a website and NOT in the Reportmanager?
Has anybody done something like this and are there any examples?
Thx
Jo-Jo
View 10 Replies
View Related
Aug 4, 2004
Hi All,
I'm trying to create a proc for granting permission for developer, but I tried many times, still couldn't get successful, someone can help me? The original statement is:
Create PROC dbo.GrantPermission
@user1 varchar(50)
as
Grant create table to @user1
go
Grant create view to @user1
go
Grant create Procedure to @user1
Go
Thanks Guys.
View 14 Replies
View Related
May 20, 2008
the subject pretty much says it all, I want to be able to do the following in in VB.net code):
{[If [table with this name] already exists [in this sql database] then [ don't create another one] else [create it and populate it with these values]}
How would I do this?
View 3 Replies
View Related
Mar 3, 2014
I created a cursor that moves through a table to retrieve a user's name.When I open this cursor, I create a variable to store the fetched name to use within the BEGIN/END statements to create a login, user, and role.
I'm getting an 'incorrect syntax' error at the variable. For example ..
CREATE LOGIN @NAME WITH PASSWORD 'password'
I've done a bit of research online and found that you cannot use variables to create logins and the like. One person suggested a stored procedure or dynamic SQL, whereas another pointed out that you shouldn't use a stored procedure and dynamic SQL is best.
View 3 Replies
View Related
Jul 20, 2005
Can I dynamically (from a stored procedure) generatea create table script of all tables in a given database (with defaults etc)a create view script of all viewsa create function script of all functionsa create index script of all indexes.(The result will be 4 scripts)Arno de Jong,The Netherlands.
View 1 Replies
View Related
May 23, 2001
Hi,
I am doing a repl.in SQL7/NT.
At time of 'Push Subscription wizard' - I used the option "Yes,Initialize the schema and data......" whereas I already had data and schema at the subscriber.
Now my question is what will happen now and how long will this process take(for approx5GB of DAta).
OR should I stop the process - it's already an hour when I started the process.
Any suggestion appreciated.
View 1 Replies
View Related
Aug 24, 2001
I have created a subscription pull from one SQL server to another so that the database from one SQL server is replicated to another. But when the subscription runs, no data appears in the subscriber SQL server. When I check the subscription, I see that the database is connecting to the publisher but that is it. I have the login correct but what am I missing? Do the tables in the subscriber database have to be already created and matching the ones in the publisher database before the subscription runs or are they automaticaly created after the subscription runs?
Thank you in advance
View 1 Replies
View Related
Feb 7, 2005
Hello all,
I have a data driven subscription with the information about the file name/file extension/ path etc coming in from a database. The problem is that the subscription status after running tells me that things are done and there is no error but the file is not being generated in the specified directory and for that reason the file is not generated at all anywhere on the hard disk. can anybody please help.
The information in the database for the report is as follows
FileName : Test1
FileExtn : True
Path = \ram\C$Reports
Render_Format = PDF
Username = Administrator
Password = password
Writemode = Overwrite
All the fields are varchar(50) in size.
View 1 Replies
View Related
Mar 20, 2006
Hi, wonder if someone can help.
I've created a subscription and scheduled it to run but I get the following message:
Failure sending mail: The transport failed to connect to the server.
Anyone any ideas why? or what I can do to fix it?
Thanks
View 3 Replies
View Related
Jul 26, 2004
Because of problems trying to alter databases used
for replication my software would need to find out
if a database is a publisher or was repliated (using
T-SQL). Is this possible?
View 1 Replies
View Related
Sep 27, 2006
My name is Tech guy,
I want to use window script program to execute a pull subscription installed on SQL 2005 express edition. Because it free for downloand.
is there a script that can call an existing pull subscription execution.
View 6 Replies
View Related
Dec 28, 2006
is there anyone know how to drop subscription from the publisher database without a connection to the subscriber(because the subscriber server is formated)
View 3 Replies
View Related
Sep 14, 2006
Are there any procedural differences between Express and MSDE considering pull subscription?
Thanks
abdul
View 2 Replies
View Related
Jul 2, 2007
Hi
I have uploaded a report onto my 2005 Reporting Manager and want to create a daily email of the report... How do I set up the email facility? Can someone give me a link?
I not sure what to do because the company uses Exchange Server and not SMTP....
Thanks
View 5 Replies
View Related
Apr 24, 2008
Hi,
I need to subscribe one report in Reporting Services. I was compiled all fields and I said to report server that
I want excel file at one shared directory of the server.
When the report server tried to process the report I have the following messagge:
Failure writing file S16 : An unexpected error occurred in Report Processing.
What's the report want?
thanks.
View 5 Replies
View Related
