Cannot Restart Sql Server And Agent 2005

Oct 31, 2007



I've installed an SSL certificate via IIS. I stopped sql server and agent but cannot restart them. I'm getting the following message in the error log:

2007-10-31 21:24:53.63 Server Error: 17182, Severity: 16, State: 1.
2007-10-31 21:24:53.63 Server TDSSNIClient initialization failed with error 0x2, status code 0x38.
2007-10-31 21:24:53.63 Server Error: 17182, Severity: 16, State: 1.
2007-10-31 21:24:53.63 Server TDSSNIClient initialization failed with error 0x2, status code 0x1.
2007-10-31 21:24:53.63 spid9s Starting up database 'model'.
2007-10-31 21:24:53.63 Server Error: 17826, Severity: 18, State: 3.
2007-10-31 21:24:53.63 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2007-10-31 21:24:53.63 Server Error: 17120, Severity: 16, State: 1.
2007-10-31 21:24:53.63 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.


I've tried removing the SSL certificate but with no success.

Help! I'm starting to think that the only solution is to uninstall sql server 2005 and reinstall.

View 14 Replies


ADVERTISEMENT

Sql Agent Would Not Restart After Restarting Sql Server

Mar 18, 2002

Hello everybody

I setup Sql agent for autostart with sql server and autorestart if stoped
but after rebooting NT or after stoping SQL server it never starts ,I have to start it manualy

Where to look for problem ?

View 2 Replies View Related

Restart Of SQL Server Agent Restarts SQL Server

May 24, 2006

Whenever I restart the Sql Server Agent, it causes SQL Server to restart also - is this correct ? I thought the dependency was the other way around i.e. restarting SQL Server would cause the agent to restart ? Any insights gratefully accepted.

View 5 Replies View Related

SQL Agent Auto-restart Problems

May 31, 2001

Morning,

I set up SQL Agent to start up on a domain account with Administrator rights, and the
auto-restart option is on. However, the agent does not restart automatically when restarting
SQL Server. No problems restarting manually. The Event Viewer logs the following:
"SQLServerAgent security context does not have server-autorestart privileges."

Any ideas on how to diagnose this?
Thanks,

Sergio

View 4 Replies View Related

SQL 2012 :: Restart Agent On AG Fail Over

Jul 27, 2015

I'm trying to figure out a way to automatically restart the SQL Agent service when an AG fails over to a secondary node. I've created a job on each AG node that runs every 15 seconds and detects when a fail over has happened. It then issues a SQL Agent stop command and then a SQL Agent start command. The problem is that once the stop command happens the start command never fires because the SQL Agent is now stopped.

View 3 Replies View Related

How To Restart A Stopped Merge Agent Automatically

May 7, 2006

Hi, I have setup a replication between two servers. And sometimes due to network connection problem, I get error message like :

The subscription to publication 'pub_1' is invalid.

After 10 retries, if connection cannot be made successfully, the Merge Agent will stop running.

How can I start the Merger Agent automatically after it has been stopped?

View 5 Replies View Related

Date/Time Of Latest SQL Server 2005 Instance Restart

Jan 28, 2008



Is the Date/Time of the latest SQL Server 2005 instance restart stored somewhere in the system catalog?
This value is quite relevant when retrieving information on the costliest unused indexes in the instance.

I know of one way of doing this, which is to search the SQL Logs for this info.
This solution is very unwieldy - we recycle the logs daily and we only keep the logs of the last 7 days.

View 4 Replies View Related

SQL Server 2005 Job Agent

Jun 18, 2007

Hi,

I m using SQL Server Job Agent to execute my SQL Server Integration Package. When I execute this job, the status of the job is shown as 'Between tries' and the job get hanged. I searched through the msdn. The solution provided is specific to SQL Server 2000. I am not able to get the solution for SQL Server 2005. Could someone please tell me the reason behind this problem?





Regards

AKRAO

View 3 Replies View Related

Service Stop/start/restart Questions 2005 SP2

Oct 15, 2007

A few service stop/start/restart questions on SQL Server 2005 SP2, whichI'll call SQLS.It looks as if there are *potentially* 6 ways to start/stop SQLSServices like the engine itself, integration services, reportingservice, Agent..-SQLS Configuration Manager-SQLS Surface Area Configuration (for Services and Connections)-Mgmt Studio Local (on server)-Mgmt Studio Remote (on client)-Windows Control Panel->Admin Tools->Services-Command Prompt (ala net start MSSQLSERVER)By policy, I am /not/ Administrator on the server. But I am SysAdminrole in SQLS. I have had various levels of success starting/stoppingservices in the ways listed above. In some I get Access denied, and inothers I get no msg and it simply doesn't work.Is there some special non-Admin OS group I need to be in to start/stopservices? Is this handled differently in the different interfaceslisted above?It seems like my best success for starting/stopping the engine and Agentis in /local/ Mgmt Studio, but /not/ remote Mgmt Studio - the optionsare greyed out on a remote client. Is this by design? Is it a SQLSbug?I'm sure I'm not the only SQLS DBA who does not have Admin rights on hisserver who wants to start/stop services. Generally speaking, how isthis intended to work?Any help appreciated.Allen JantzenA freshly minted DQLS DBA

View 1 Replies View Related

Does SQL Server 2005 Express Have A SQL Agent

Jul 20, 2006

Does SQL Server 2005 Express have a SQL Agent?  If so, can someone tell me where I would find it?  If not, can someone tell me if there is a replacement for it or some kind of work around?
Thanks,
John

View 2 Replies View Related

SQL Server 2005 Express Agent

Jan 5, 2006

Hi - I know SQL Server 2005 Express comes with no agent, so how do people using it, currently backup their databases?
eg. I currently use MSDE in a live environment (small user base), and I use the Agent/Jobs to create a backup each night.
How could I achieve the same with the SQL Server 2005 Express?
Thanks for any help,
Mark

View 11 Replies View Related

Starting Sql Server Agent Sql 2005

May 4, 2007

I am running windows 2003 and sql server 2005. i am following the directions in books online:

On the Start menu, point to All Programs, point to Microsoft SQL Server 2005, point to Configuration Tools, and then click SQL Server Configuration Manager.

In SQL Server Configuration Manager, expand Services, and then click SQL Agent.

In the results pane, right-click any instance, and then click Start.

A green arrow on the icon next to the SQL Server Agent and on the toolbar indicates that SQL Server Agent started successfully.

Click OK.

the problem is i have nothing in Services. there is nothing to expand.
is it installed wrong?? or is there another step before this that i have to do??

View 1 Replies View Related

SQL Server Agent Missing In 2005

Feb 27, 2008

Hi all, This is my first message in this forum and I am a new bie to SQL server 2005.. I am trying to schedule the backup job for a database in 2005 and I am not able to figure out where it is. I browsed through few topics in the forums and found that I can do using sql server agent in the SQL server management studio. But I do not see the sql server agent in the management studio. Any help is appreciated.

Thanks all!

View 6 Replies View Related

SQL SERVER AGENT 2005 Job Failure

Nov 13, 2007



I have scheduled a job in SQL Server Agent, as it executes it fails Immediatly. The error history displays the following error details, which i copied from the log file


"Description: Unable to load the package as XML because of package does not have a valid XML format. A specific XML parser error will be posted.

The system cannot find the path specified.". This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format. End Error ... The package could not be f... The step failed."




I am using the File System Type to load my package.

Please assisst me in finding the solution


Regards

ZeEsHaN

View 9 Replies View Related

SQL Server 2005 SP2 Agent XPs Error

Mar 18, 2007

I have been having a problem with an attempted install of sp2 (the updated one) and don't have a clue on how to get past it. Here is the error that I get

MSP Error: 29537 SQL Server Setup has encountered the following problem: [Microsoft][SQL Native Client][SQL Server]SQL Server blocked access to procedure 'dbo.sp_is_sqlagent_starting' of component 'Agent XPs' because this component is turned off as part of the security configuration for this server.

What is strange is that I have ensured that the Agent XP's are enabled prior to the sp install by checking the agent xp's configuration option but it seems as though during the sp install it disables them and encounters problems when trying to start the SQL Agent resulting in a failure of the sp install with the message shown above.

When I check the database after the failure, it does show the AgentXP's as being disabled. I've re-enabled them multiple times with the same result.

The sp is being installed on a 2 node cluster but only one node is having the problem, the other upgraded fine. I have also had this problem on a single non-clustered server with 3 instances where two of them installed fine but one didn't, it too had the same error message.

My basic configuration is as follows:
x64 Windows 2003 Standard Edition R2
SQL Server 2005 Standard Edition (for the clustered server) Dev Edition for the standalone server

Any thoughts on how to get past this problem or is this a bug?



View 1 Replies View Related

SQL Server,SQL Server Agent,SQL Analysis Resources Failing In SQL 2005 Cluster

Aug 17, 2007

Hi.
I have installed an SQL 2005 Failover Cluster on a Two Node Active Passive Windows 2003 Cluster.If i am trying to failover from the Active node to the passive Node,The Sql Server,Sql Server Agent and SQL Analysis resources fail,However if i reset the passowrd in the services tab of the above three services on the pasive node,the resources come online.
Below is the brief of my setup
1.I have two Active directory domain controllers running Windows 2003 R2 Standard edition with SP2.
2.i have installed a Windows 2003 Two Node Active Passive Cluster as NODE1 and NODE2.
3.The Domain account used to install WIndows 2003 A/P Cluster is Clusteradmin.This account is the member of Administartors on the Domain as well as the Local Admin on NODE1 and NODE2.
4.SQL 2005 with SP2 is installed on both the Nodes as SQL 2005 Failover Cluster.The account used to install SQL 2005 is sqadmin.This account is the member of Administartors on the domain and the member of Local Admins on NODE1 and NODE2.
5.SLQ 2005 has four domain groups for 4 SQL Services.The Services are SQL Server,SQL Server Agent,SLQ Anaylisis Server and Full text Search.
6.Each of these servcie has a seperate service account created for them.All these service accounts areb the members of domain admin and the member of Local Admin on NODE1 and NODE2.
7.Each of these servcies is running under these servcie accounts in the Servcies tab in NODE1 and NODE2.
8.If i fail the resources from NODE1 to NODE2 ,The SQL Server,SQL Server Agent and SQL Anaylisis resources are failing.on going to the service tab of NODE 2 I reset the password for these services,the services come online.
10.The Cluster resources and MSDTC Resources are Failing over successfully.They are coming online successfully.
11,I have a problem with the SQL Server Resources,even if i failback to NODE1 from NODE2,the same resources are failing again.

Plz Advice.
Regards
Khalid

View 1 Replies View Related

SQL Server 2005 Agent - User Account

Jun 26, 2007

Who needs to invoke the jobs in SQL05? Manually executing the job import_myteam as a user with dbo privileges fails. So, which user account should be assigned to successfully run scheduled jobs (ie, dbo)?

The package file for the job in question is located in the server€™s C:Documents and SettingsuserxyzMy DocumentsVisual Studio 2005ProjectsIntegration Services Project3Integration Services Project3MyTeam (1).dtsx, but this still fails when the user userxyz is logged on and is executing the job directly from the server console.

Step1 of the package executes as userxyz
Step 2 fails and runs as cpmc-casql02

The user account userxyz has administrator rights to the server as well as being a sysadmin of the SQL2005 database (named cpcasql02).

The account cpmc-casql02 is a €œpublic€? user of the database and is a member of the administrator group on the server itself.

This same scenario carries for tasks as simple as truncating a table and importing the contents of another table in the same database.

All of these jobs exhibit the same behavior whether run directly from the server console on remotely from a workstation connected to the SQL2005 database.

Attempting to get a really simple job working, we also created a very simple SSIS package which does a select from a database table and writes the output to a text file. When running the same package from the user€™s workstation within Visual Studio, the package executes successfully. Once copied to the server, and run from within SQLServer as MyJunePackage however, the execution fails in the same manner as described above. The first step executes successfully as the logged-in user and the second fails executed under the account cpmc-casql02.

So, again we have the same behavior of sequential steps being run as different users with unsatisfactory results. Please advise as to how to set up these jobs to run correctly and consistently.

Thanks very much,Eric W

View 1 Replies View Related

SQL Server 2005 Database Mail And Agent Error

Feb 9, 2006

Hello, hoping someone might be able to help.

I've set up Database Mail on an instance of 2005 and the test mail works just fine. However, when testing a job (notify on fail, success, whatever) the mail fails to send. Job History last information reads NOTE: Failed to notify 'My Name' via email.

Checked out the Database Mail logs - nothing interesting.

Restarted the Agent service and then checked out the current Agent Log. Found message:

[260] Unable to start mail session (reason: No mail profile defined).

The 'DatabaseMailProfile' key is most certainly defined in the Registry
(at 'HKEY_LOCAL_MACHINE', N'SOFTWAREMicrosoftMicrosoft SQL ServerMSSQL.1SQLServerAgent')

I'm at a loss...why is it telling me no mail profile defined?
I'd be most grateful for any help if anybody else has run across this problem.

Cheers,
Megan

View 2 Replies View Related

SQL Server 2005 Agent Service High CPU Usage

Jan 30, 2008

I have six stored procedures that I have to run hourly during the day. When I schedule them into separate SQL jobs (they must run concurrently), the percent CPU of Sqlagent90.exe process goes way up, eventually pegging out the overal CPU usage on the server. When I run the six stored procedures concurrently from query windows in SQL Server Management Sudio, the overall CPU usage stays very low.

Is there something about the SQL Server Agent that inherently adds CPU overheard? Thanks in advance ....

View 2 Replies View Related

Notification To SQL Server 2005 Agent Job On Completion Of Oracle Package

Dec 21, 2007



Is there any built-in way of kicking off a job on SQL Server 2005 Agent whenever a package/job completes in Oracle?
Are there any (Triggers? Msft queue? Event Notification?) mechanisms to automate running a job on the SQL side?
Any article or knowledge articles would be appreciated also.

If not are there any built-in stardardized polling techniques? Or are there any timers in SSIS?
That way I can delay executing a child package until a certain record has been inserted into a control table in Oracle.
I don't want to write an inefficient for loop that blocks all other processing on the server and iterates once every second.

Thanks

View 1 Replies View Related

SQL Server 2005 Agent - Error Copying A File Onto The Network...

Jan 10, 2008

Hi,

I have an SSIS package designed to copy across a file from local machine to a location on the network.

The SSIS package works fine when I run it directly run it in the Designer, ie, it copies over the file to the network.

But when I run the package through the Job server agent, it fails giving me a validation error on the network path..

Does it have to do with the permissions of the User account used here? Could anyone please provide any information on this....


Thanks

View 14 Replies View Related

SQL SERVER 2005 REPLICATION (MERGE AGENT FAILING : PUSH SUBSCRIPTION)

Mar 27, 2006

ERROR MESSAGE:

"Message: Incorrect syntax near 'NoteID'."

Here is a snipet from the output file:

2006-03-27 13:01:49.820 Skipping file 'NotesHistory_21.sch' because it has already been delivered for a previous article or by a previously interrupted snapshot.
2006-03-27 13:01:49.867 OLE DB Subscriber 'LUZERNV4-PDOSQL4': SET ANSI_NULLS ON

2006-03-27 13:01:49.898 OLE DB Distributor 'LARGOS00-SDI': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2006-03-27 13:01:49.945 OLE DB Subscriber 'LUZERNV4-PDOSQL4': SET QUOTED_IDENTIFIER ON

2006-03-27 13:01:50.008 [17%] OLE DB Subscriber 'LUZERNV4-PDOSQL4': CREATE TABLE [dbo].[MSmerge_conflict_EFILE_MERGE_NotesHistory](
[NoteID] [int] NOT NULL,
[CaseRefNum] [int] NOT NULL,
[KeyField] [varchar](500) NOT NULL,
[KeyValue] [varchar](500) NOT NULL,
[Note] [varchar](800) NULL,
[NoteField] [varchar](100) NULL,
[ScanDocID] [int] NULL,
[PDF_ID] [int] NULL,
[RescanCode] [int] NULL,
[RescanNote] [varchar](100) NULL,
[AuditID] [bigint] NOT NULL,
[rowguid] [uniqueidentifier] ROWGUIDCOL NOT NULL
)


ꜽśã¹? êœ?Å›B 27 13:01î–”Å›è›ªç —êœ?Å›é”?Ä€Percent Complete: 17
2006-03-27 13:01:50.086 OLE DB Subscriber 'LUZERNV4-PDOSQL4': SET ANSI_NULLS ON


2006-03-27 13:01:50.117 Preparing table 'NotesHistory' for merge replication
2006-03-27 13:01:50.164 OLE DB Subscriber 'LUZERNV4-PDOSQL4': SET QUOTED_IDENTIFIER ON


2006-03-27 13:01:50.195 OLE DB Distributor 'LARGOS00-SDI': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2006-03-27 13:01:50.258 OLE DB Subscriber 'LUZERNV4-PDOSQL4': if object_id('MSmerge_conflicts_info') is not NULL
alter table [MSmerge_conflict_EFILE_MERGE_NotesHistory] add origin_datasource_id uniqueidentifier NULL

2006-03-27 13:01:50.351 OLE DB Subscriber 'LUZERNV4-PDOSQL4': if object_id('MSmerge_conflicts_info') is not NULL
create nonclustered index [ncMSmerge_conflict_EFILE_MERGE_NotesHistory] on [MSmerge_conflict_EFILE_MERGE_NotesHistory] ([rowguid], origin_datasource_id)

2006-03-27 13:01:50.383 OLE DB Subscriber 'LUZERNV4-PDOSQL4': exec sp_MSsetconflicttable @article = N'NotesHistory', @conflict_table = N'MSmerge_conflict_EFILE_MERGE_NotesHistory'

2006-03-27 13:01:50.430 OLE DB Subscriber 'LUZERNV4-PDOSQL4': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2006-03-27 13:01:50.476 [17%] The merge process was unable to deliver the snapshot to the Subscriber. If using Web synchronization, the merge process may have been unable to create or write to the message file. When troubleshooting, restart the synchronization with verbose history logging and specify an output file to which to write.Percent Complete: 17
2006-03-27 13:01:50.50é”?Ä€
2006-03-27 13:01:50.539 Applied script 'NotesHistory_21.cft'
2006-03-27 13:01:50.586 OLE DB Subscriber 'LUZERNV4-PDOSQL4': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2006-03-27 13:01:50.617 OLE DB Distributor 'LARGOS00-SDI': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2006-03-27 13:01:50.711 Percent Complete: 17
2006-03-27 13:01:50.742 {call sp_MSsetconflicttable (N'NotesHistory', N'MSmerge_conflict_EFILE_MERGE_NotesHistory', N'LARGOS00-SDI', N'EFILE', N'EFILE_MERGE')}
2006-03-27 13:01:50.773 OLE DB Distributor 'LARGOS00-SDI': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2006-03-27 13:01:50.867 Percent Complete: 0
2006-03-27 13:01:50.898 Category:COMMAND
Source: Failed Command
Number: 0
Message: {call sp_MSsetconflicttable (N'NotesHistory', N'MSmerge_conflict_EFILE_MERGE_NotesHistory', N'LARGOS00-SDI', N'EFILE', N'EFILE_MERGE')}
2006-03-27 13:01:50.961 Percent Complete: 0
2006-03-27 13:01:50.992 Category:SQLSERVER
Source: LUZERNV4-PDOSQL4
Number: 102
Message: Incorrect syntax near 'NoteID'.
2006-03-27 13:01:51.039 Percent Complete: 0
2006-03-27 13:01:51.070 Category:NULL
Source: Merge Replication Provider
Number: -2147201001
Message: The merge process was unable to deliver the snapshot to the Subscriber. If using Web synchronization, the merge process may have been unable to create or write to the message file. When troubleshooting, restart the synchronization with verbose history logging and specify an output file to which to write.
2006-03-27 13:01:51.133 Disconnecting from OLE DB Subscriber 'LUZERNV4-PDOSQL4'
2006-03-27 13:01:51.180 Disconnecting from OLE DB Subscriber 'LUZERNV4-PDOSQL4'
2006-03-27 13:01:51.226 Disconnecting from OLE DB Subscriber 'LUZERNV4-PDOSQL4'
2006-03-27 13:01:51.258 Disconnecting from OLE DB Subscriber 'LUZERNV4-PDOSQL4'
2006-03-27 13:01:51.305 Disconnecting from OLE DB Publisher 'LARGOS00-SDI'
2006-03-27 13:01:51.336 Disconnecting from OLE DB Publisher 'LARGOS00-SDI'
2006-03-27 13:01:51.383 Disconnecting from OLE DB Publisher 'LARGOS00-SDI'
2006-03-27 13:01:51.414 Disconnecting from OLE DB Publisher 'LARGOS00-SDI'
2006-03-27 13:01:51.445 Disconnecting from OLE DB Distributor 'LARGOS00-SDI'
2006-03-27 13:01:51.492 Disconnecting from OLE DB Distributor 'LARGOS00-SDI'
2006-03-27 13:01:51.523 The merge process will restart after waiting 60 second(s)...

View 1 Replies View Related

Oracle 9i -&&> SQL Server 2005: Snapshot Agent Aborts Suddenly Uninterrupted

Jun 14, 2006

Hi - I hope some of you can help me with this problem.

I'm trying to run the snapshot agent for 77 published tables, but the agent stops suddenly uninterrupted. It stops in the middle of taking a snapshot of a table containing 81,719,531 rows. The error message is pasted below.

Message
2006-06-14 05:33:33.53 [89%] Bulk copied 100000 rows from "ORAMSSQLREPL"."HREPL_ARTICLE_21_21" (57200000 total rows copied)
2006-06-14 05:34:12.57 [89%] Bulk copied 100000 rows from "ORAMSSQLREPL"."HREPL_ARTICLE_21_21" (57300000 total rows copied)
2006-06-14 05:34:51.23 [89%] Bulk copied 100000 rows from "ORAMSSQLREPL"."HREPL_ARTICLE_21_21" (57400000 total rows copied)
2006-06-14 05:35:29.99 [89%] Bulk copied 100000 rows from "ORAMSSQLREPL"."HREPL_ARTICLE_21_21" (57500000 total rows copied)
2006-06-14 05:36:09.82 [89%] Bulk copied 100000 rows from "ORAMSSQLREPL"."HREPL_ARTICLE_21_21" (57600000 total rows copied)
2006-06-14 05:36:49.38 [89%] Bulk copied 100000 rows from "ORAMSSQLREPL"."HREPL_ARTICLE_21_21" (57700000 total rows copied)
2006-06-14 05:37:28.56 [89%] Bulk copied 100000 rows from "ORAMSSQLREPL"."HREPL_ARTICLE_21_21" (57800000 total rows copied)
2006-06-14 05:37:35.36 [89%] The replication agent was shut down in response to an abort request.


Does anyone know what is causing this error and how I can possibly solve it?

Best Regards,
JB Plum

View 14 Replies View Related

Execute Sql Server Agent Job Task - Job Immediately Returns Success... However Agent Job Is Still Running???

Nov 30, 2006

when I run a package from a command window using dtexec, the job immediately says success.
DTExec: The package execution returned DTSER_SUCCESS (0).
Started: 3:37:41 PM
Finished: 3:37:43 PM
Elapsed: 2.719 seconds



However the Job is still in th agent and the status is executing. The implications of this are not good. Is this how the sql server agent job task is supposed to work by design.



Thanks,

Larry

View 1 Replies View Related

Auto-restart SQL Server?

Sep 13, 2004

how can I configure the SQL server to automatically restart selected services on a regular basis?

View 1 Replies View Related

Unexpected Server Restart

Sep 27, 2000

Has anyone ever experienced the SQL Server unexpectedly rebooting?

Yesterday my SQL Server 7 installation rebooted itself and the error log seemed fine as did the restart. The only evidence I can find was a message in the event viewer's application log stating the the MSSQLServer service terminated unexpectedly. Any ideas are appreciated.


Thanks,

- D

View 2 Replies View Related

Intermittent Restart Of SQL Server 6.5

Apr 3, 2001

I've a SQL server that intermittently restarts itself mostly during. Its a SQL Server 6.5 SP4 running NT 4.0 SP6. It really has no rhyme or reason to it happening. The are no indications in either the SQL or the Nt events logs.
Has anyone heard of this?

Thanks inadvance

View 2 Replies View Related

Restart Linked Server

Aug 21, 2006

Hi,

I have a linked server set up to a proprietarty temporal DB through an OLEDB provider. From time to time and for various reasons the OLEDB provider crashes with "Error 7302 Could not create an instance of OLE DB Provider 'IhOLEDBProvider.iHistorian.1'. OLE DB Trace [Non Interface Error: CoCreate of DSO for IhOLEDBProvider.iHistorian.1 returned 0x80070008"

Up till now, to re-initilize the connection we have just restarted the SQL Server service. However, some automated processes are now feeding data into this server and more users and have started coming online so restarting for this issue has become a big deal.

Getting the OLEDB provider sorted out isn't an option at present so my question is:

Is there a way to re-initalise a failed linked server other that restarting the SQL Service?

Thanks,

Eamon.

View 2 Replies View Related

Sql Server Restart Automatically

Feb 18, 2004

Hi,

I have SQL server running on windows Adv Server 2000. Since last couple days whole computer restart every one hours. Only thing I remember doing was to shrink database db size is 200+GB.

How can I fix this problem.

Any help will be highly appreciated?

Thanks.

Samir

View 1 Replies View Related

Server Restart Problem

Apr 7, 2008

Hi,

I've got a table with a column that contains the status of available licenses to the user, i.e. they are either in use or are available. If the server goes down, then when it is restarted I need to make sure all the rows in this column describe each license as being available.

So the question is how can I ensure data in a table is, if you like, initialized, each time the server is restarted? Is there a system defined stored proc or trigger than is executed when a server is restarted?

Thanks.

View 4 Replies View Related

Sql Server Restart After Locking

Mar 27, 2007

Hi...

i hv a database (sql server 2000) where i got locking on many tables and my application was down.

I restarted the sql server and the application was fine but after five minutes the same locking issue started happening. I did a index rebuild the next time on all indexes and everything was fine.But i cannot relate how locking occured and why it was not after index rebuild.Can anyone shed some light on this or anyone had similar experience... cos i cannot figure out a way on this.

Thanks in advance

View 4 Replies View Related

SQL Server Agent Could Not Access Replication Agent

Feb 19, 2007

We just moved source server to newer, bigger box ... Windows 2003 and Active Directory ... Snapshot agent worked but distribution failed ... Same login as on older machine, login is sysadm, used DCOMCNFG to allow ability to launch process ... What are we missing?

View 4 Replies View Related

How To Restart MSSQL SERVER Service

Feb 20, 2006

hello,

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved