Hi,
I have a package which has 2 file system tasks and 2 data flow tasks all in a for each loop container. if i execute the package from the development studio its executes fine but when i try to run it from the command prompt using the dtexec utility..it just runs upto the first data flow task and then it hangs unexpectedly.
Any help on this would be really appreciated.
Thanks
Aashna
Hi all,
I have a serious problem with my SSIS Package while executing using 32-bit DTExec and 64-bit DTExec.
Here are the details:
Environment:
Windows Server 2003 64-bit (Build 3790: Service Pack 2)
SSIS 32-bit & 64-bit installed
SQL Server 2005 (Microsoft SQL Server 2005 - 9.00.1399.06 (X64) - RTM)
SSIS Package details (compiled in 64 bit)
Script tasks only
Microsoft Visual Basic .NET (using TRY...CATCH block)
PreCompileScriptIntoBinaryCode = TRUE
Run64BitRunTime = TRUE
Execution
Batch file that uses DTExec to execute the Package.
SCENARIO
I am trying to exeucte the above SSIS package using both 32-bit and 64-bit DTExec to make it failure by providing invalid connection string. Here are the details,
Wrong connection String using 32-bit Execution
While establishing the connection the error message has been nicely captured in to my Exception block and writes into the log file.
Wrong connection String using 64-bit Execution
While establishing the connection the error has not been catpured anywhere (although I have TRY CATCH block) and it haults there itself with the message "Process is terminated due to StackOverflowException". Later I found that the error is due to the connection string along with the unhandled exception.
Please suggest any one of the following my findings, also if you have any other advice would be very much appreciated.
1. Shall I go ahead and fix the issue by handling those unhandled errors? (e.g Appdomain, application). I tried several but still not working using 64-bit DTExec.
2. Shall I go ahead and use 32-bit DTExec to execute the package? If so, is there any other major issue...like performance or anyother bug?
P.S: We cannot apply any service pack for SQL Server 2005 at the moment. Sorry abt it. If you have any specific hotfix for DTExec (without affecting SQL Server) then we can decide.
Sorry for the lengthy one and Thanks very much for you help in advance .
Thanks again!
Suresh
Hi,
I am running my package in this way:
exec xp_cmdshell 'dtexec /SQL "SBLoadExcelDBLog" /SERVER test /USER **** /PASSWORD ***** /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING EW
/LOGGER "{6AA833A1-E4B2-4431-831B-DE695049DC61}";"Test.SuperBowl"
/Set Package.Variables[User::varExcelFileName].Properties[Value];"aaab"
/Set Package.Variables[User::varExcelWorkbookName].Value;"Sheet1$"
/Set Package.Variables[User::varExcelFileFullPath].Value;"D: estshareaaab.xls"
/Set Package.Variables[User::varDestinationTableName].Value;"FeaturesTmp"
/Set Package.Variables[User::varPreSQLAction].Value;"delete from FeaturesTmp" '
I got errors:
Started: 3:49:51 PM
Progress: 2006-01-30 15:49:52.34
Source: Extract AdHoc Data from Excel
Validating: 0% complete
End Progress
Error: 2006-01-30 15:49:52.46
Code: 0xC0202009
Source: Extract AdHoc Data from Excel Excel Source [649]
Description: An OLE DB error has occurred. Error code: 0x80040E37.
End Error
Error: 2006-01-30 15:49:52.46
Code: 0xC02020E8
Source: Extract AdHoc Data from Excel Excel Source [649]
Description: Opening a rowset for "Sheet1$" failed. Check that the object exists in the database.
End Error
Error: 2006-01-30 15:49:52.51
Code: 0xC004706B
Source: Extract AdHoc Data from Excel DTS.Pipeline
Description: "component "Excel Source" (649)" failed validation and returned validation status "VS_ISBROKEN".
End Error
Progress: 2006-01-30 15:49:52.51
Source: Extract AdHoc Data from Excel
Validating: 25% complete
End Progress
Error: 2006-01-30 15:49:52.51
Code: 0xC004700C
Source: Extract AdHoc Data from Excel DTS.Pipeline
Description: One or more component failed validation.
End Error
Error: 2006-01-30 15:49:52.51
Code: 0xC0024107
Source: Extract AdHoc Data from Excel
Description: There were errors during task validation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 3:49:51 PM
Finished: 3:49:52 PM
Elapsed: 0.703 seconds
Hi,
when I run the following from the command prompt I am getting an error saying that can not set the variable Status as int.
dtexec /File "C:workSSIS PackagesDataflowControlRoom.dtsx" /SET
Package.Variables[ChannelCode].Value;"test" /SET
Package.Variables[Status].Value;1
both variables as you can see are in the top level.
the problem is that ChannelCode is string but Status is Integer.
if I take out the /SET Package.Variables[Status].Value;1 part from the command line it will work fine. I think th eproblem is down to diffenrt types of variable as there are two types of String and Interger.
any ideas on what the problem migth be.
p.s. I am runnning SQL server 2005 Dev edition (without any SP)
Cheers
I created a package and stored in SQL server.
I am running it as follows
master.dbo.xp_cmdshell dtexec /sq "ABC DEF GHI" /ser "Prod"
ABC DEF GHI --> is my package name.
When i run this from a job, it runs without error
but when i run the above sql i am getting error as
Msg 102, Level 15, State 1, Line 2
Incorrect syntax near '/'.
Am i missing some thing, please advice. Is that the problem between spaces in the package name?
Hi everybody.
I'm trying to run a package, stored in MSDB, using dtexec utility from cmd.
I do this using "dtexec /sq Main_Package /ser local /user sa /Password Oracle"
But all I got is:
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.3042.00 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 12:14:15
Could not load package "Main_Package" because of error 0xC0014062.
Description: The LoadFromSQLServer method has encountered OLE DB error code 0x80004005 (Login timeout expired). The SQL statement that was issued has failed.
Source:
Started: 12:14:15
Finished: 12:14:34
Elapsed: 18.297 seconds
It runs perfectly from "Integration Services" directly(SQL Management Studio), but not from cmd.
I tried to run it withuot login and password, the same result
Any ideas?
Thanks.
Hi,
I have a file-deployed package which I need to call N times at once using DTEXEC. When I attempt to execute N instances of the package, the second instance doesn't execute. I can execute different packages at the same time, but never the same package more than once. Does anyone know how to get this scenario working? Just to clarify a bit more - I can call the package as many times as I like as long as I wait until the previous run of DTEXEC is finished. Please help!
Thanks,
dcb99
I am executing a package via vb.net with package.execute using the IDTSEvents interface inheriting DefaultEvents. I am trying to emulate DTExec functionality. The package runs fine and I am catching events, but I don't get nearly as many info and progress events as are put out by DTExec. From my understanding DTExec also used the managedDTS application object, is that not the case? If it uses this does anyone have an ideas on how it is grabbing more events? For example I don't get these events that DTExec shows ..
Info: 2006-09-26 14:22:27.97
Code: 0x40016041
Source: DWB02130
Description: The package is attempting to configure from the XML file "D:SSISConfigurationsDatabase.dtsConfig".
End Info
Info: 2006-09-26 14:22:28.05
Code: 0x40016040
Source: DWB02130
Description: The package is attempting to configure from SQL Server using the configuration string ""Configurations Database";"[dbo].[SSISConfigurations]";"DWB02130";".
End Info
I also don't get as many progress updates during validation, I basically get 0 and 100% while DTExec shows several 1%, 3%, 10%, etc.
Any help is greatly appriciated.
Thanks!
Harry
Hi,
If this is the syntax to set a property in a package using dtexec:
/set PackageMyForEachLoopMyDataFlow.Disable;False
What is the syntax for setting a global variable in the package?
Thanks
Hi all,
Here's is the situation :
I have a script component that uses the aspnet membership provider to create users from a csv file in an aspnetdb database. In my Business Intelligence Developpement Studio (BIDS) everything works well. I added the aspnet membership provider in DtsDebugHost.exe.config and when I run the package from the BIDS it does what it have to do.
The problems begin when I deploy the package in file system as well as in sql server. When I run it doesn't use the DTExec.exe.config to find where are added the membership provider.
If I refer to that post : http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=541086&SiteID=1
When I run the package from SQL Server it should use the DTExec.exe.config as an app.config for my script component. But it doesn't use it at all and stop with an error that have nothing to do with that. I'm sure that it doesn't use because even when I have a wrong DTExec.exe.config it shows the same error.
If some one knows something about that it will be really great. I need to force my package when it's in stored packages to use one of the *.config as an app.config file.
Hoep it's clear
Thanks in advance for all help
It looks like you can run an SSIS package via the DTEXEC command. You can also specifiy a configuraiton file flag on the command. Is there anyway to specify a configuraiton filter if you stored it into a table vs and xml file?
View 1 Replies View Relatedthanks in advance
Hi, I am web developer. But for the last few weeks i have been working on SQL2005. I actually exported data from a table (SQL 2000) into the Excel sheet and then i have been trying to import data from Excel sheet into another table(SQL 2005). For this i had created SSIS package successfully. I had added this into integration services project(MicroSoft). After pressing CTRL+F5. I am repeatedly getting the following error
DTExec:The Package Execution returned DTSER_FAILURE<1>
Please help me because requirement is urgent.
Hello,
I'm having an odd issue trying to run an SSIS package on a 64 Bit SQL 2005 SP2 (build 3042) Windows 2003 SP2 64 bit AMD Cluster. I have to use the dtexec cmd line utility from SQL Server Agent because I need to connect to an Access database. When running the package from dtexec, it doesn't seem to be able to load the package, i keep getting this error:
Executed as user: USSI-CORPsql02admin. ...00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 1:56:00 PM Error: 2008-03-03 13:56:01.28 Code: 0xC0010018 Source: {DFBF51D9-DF81-41B9-9370-9DFC68E28FBA} Description: Error loading value "<DTSropertyExpression xmlnsTS="www.microsoft.com/SqlServer/Dts" DTS:Name="Subject">@[User::vString]</DTSropertyExpression>" from node "DTSropertyExpression". End Error Error: 2008-03-03 13:56:01.28 Code: 0xC0010018 Source: {DFBF51D9-DF81-41B9-9370-9DFC68E28FBA} Description: Error loading a task. The contact information for the task is "Send Mail Task; Microsoft Corporation; Microsoft SQL Server v9; ? 2004 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1". This happens when loading a task fails. End Error Error: 2008-03-03 13:56:01.53 Code: 0xC001000E Source: TestMsgBox Description: The connection... Process Exit Code 1. The step failed.
The @[User::vString is a string variable in the package, and this particular package is actually just using the SendMail task without using an Access DB, as i'm trying to just get the dtexec utility to work. I believe i'm either doing something wrong or have found a bug, as i've used this in the past at another company without any issue.
Here's the cmd line that I'm using (I'm using the 32 bit version of dtexec):
E:Progra~1Micros~190DTSBinndtexec.exe /SQL "TestMsgBox" /SERVER D1PSQL02V /CHECKPOINTING OFF /REPORTING EW
The version of the dtexec file is: 2005.90.3042.0
Any help would be greatly appreciated.
Andy
Hello,
I want execute package with SQL Server Agent. I create a job and I try all the solutions : my job doesn't want to work.
I success to launch the package but the execution failed.
I try the same job launching from the server : it doesn't work either.
So, I copy the command line (/FILE, /DTS or /SQL) and with DTEXEC utility it works when this command is executed on the server (on a client computer, the problem "the product level is insufficient" appears).
Why is it working with this utility and not with a job ?
I try to change every secured option (credential --> proxy --> Run as ; change the owner of the job ; etc.)
What options must be checked and modified ?
Thanks for your help !
Hi,
We have a problem with visual studio. It hangs when i use the "execute package" option. New packages are running correctly but the packages which i've already built are not executing anymore...Any ideas to get things on track again?
Gr,
Hennie
I am finishing a port of a project that was done with RS2000/AS2000/DTS2000. The cube process is triggered remotely by a Korn Shell script from Services for Unix that runs a DTS package:
dtsrun.exe /S "$ANALYSIS_SERVICES_HOST" /U "$ANALYSIS_SERVICES_USER" /P "$ANALYSIS_SERVICES_PASSWORD" /N "$PACKAGE_NAME"
I have finished porting the AS and RS parts to their 2005 equivalents and now I am trying to get the cube processing converted. I have built a SSIS package that processes the cube and I have deployed it to the SQL Server in MSDB. When I am logged on to the SQL Server box directly, I can execute the package via the Management Studio and from the command line via:
dtexec /Ser "$ANALYSIS_SERVICES_HOST" /DT "$PACKAGE_PATH_NAME"
When I try to register the SQL Server in Integration Services from my client PC Management Studio it fails with "Access Denied". When I try to run the dtexec from my client PC it fails with "Access Denied".
I have walked through Kirk Haselden's instructions at:
http://sqljunkies.com/WebLog/knight_reign/archive/2006/01/05/17769.aspx
(adding myself to Distributed COM Users, noting the correct DCom Config settings for MsDtsServer and restarting the Integration Services service) and the problem is still not resolved. I have posted to the DTS group on Technet and now I am posting here. This can not be run scheduled by SQL Agent as it needs to be triggered by other load/postload activities. Are there any other fixes for this problem that I can try?
Thanks,
Keehan
By the way, being able to have all the parts of this project in one dev environment is great. The previous application was developed in 3 separate locations which was pretty clunky.
Hi All,
I developed my package in BI studio and tested runnning it through BI. Now when i have to deploy the package to main server it will be executed via batch job. This package requires an input file name too.
Now when i am trying to run the package on my loacal box using following command on command prormpt i get error given below.
COMMAND USED BY ME: DTExec /FILE 'C:ProjectIntegrationServicesSFRIntegrationServicesinpkgSFRLocation.dtsx' /SET Package.Variables[InputParamFileName].Value;'C:DataDumpInputLOC00022'
ERROR MESSAGE:
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 1:29:54 PM
Error: 2008-02-22 13:29:54.96
Code: 0xC0011007
Source: {9B1FAA88-A6FA-44CF-A2E2-DB3F737FDA65}
Description: Unable to load the package as XML because of package does not ha
ve a valid XML format. A specific XML parser error will be posted.
End Error
Error: 2008-02-22 13:29:54.96
Code: 0xC0011002
Source: {9B1FAA88-A6FA-44CF-A2E2-DB3F737FDA65}
Description: Failed to open package file "'C:ProjectIntegrationServicesSFR
IntegrationServicesinpkgSFRLocation.dtsx'" due to error 0x800700A1 "The speci
fied path is invalid.". This happens when loading a package and the file cannot
be opened or loaded correctly into the XML document. This can be the result of
either providing an incorrect file name was specified when calling LoadPackage o
r the XML file was specified and has an incorrect format.
End Error
Could not load package "'C:ProjectIntegrationServicesSFRIntegrationServices
inpkgSFRLocation.dtsx'" because of error 0xC0011002.
Description: Failed to open package file "'C:ProjectIntegrationServicesSFRInt
egrationServicesinpkgSFRLocation.dtsx'" due to error 0x800700A1 "The specifie
d path is invalid.". This happens when loading a package and the file cannot be
opened or loaded correctly into the XML document. This can be the result of eit
her providing an incorrect file name was specified when calling LoadPackage or t
he XML file was specified and has an incorrect format.
Source: {9B1FAA88-A6FA-44CF-A2E2-DB3F737FDA65}
Started: 1:29:54 PM
Finished: 1:29:54 PM
Elapsed: 0.047 seconds
PLease let me know solution to creating batch job for executing this pkg with input param.
hi!
i am trying to execute through command line the following:
dtexecui /SQL "ArchiveMain" /SERVER "SE413695AASQL2005" /WARNASERROR /MAXCONCURRENT " -1 " /CHECKPOINTING OFF
I am actaully creating an archiving package.
1. All it does is get some data from the Table.
2. creating directory and set usedirectoryifexist = true
shows some warning when i run that directory already exists cos i don't want to create new one i want to use the existing one.
3. actual archiving to get call to another package for archiving - warning while running the package that parent variable is missing
The pacakge seems to run while i execute it thorugh command prompt but i get this message
DTExec: The package execution returned DTSER_SUCCESS (0) but had warnings, with
warnings being treated as errors!
Thanks,
Jas
I have a package that executes fine in BIDS. However, when calling it using xp_cmdshell it cannot find the path to the source flat file. Anyone have any suggestions?
Here is the statement:
xp_cmdshell 'dtexec /SQ NatlAcctsImport /SER CR1-SQL-01 /CONN SourceConnectionFlatFile;Q:BINATNLACCTS'
Here is the result:
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
NULL
Started: 9:50:56 AM
Progress: 2006-02-10 09:50:57.40
Source: Data Flow Task
Validating: 0% complete
End Progress
Progress: 2006-02-10 09:50:57.40
Source: Data Flow Task
Validating: 50% complete
End Progress
Progress: 2006-02-10 09:50:57.42
Source: Data Flow Task
Validating: 100% complete
End Progress
Progress: 2006-02-10 09:50:57.43
Source: Data Flow Task
Validating: 0% complete
End Progress
Progress: 2006-02-10 09:50:57.43
Source: Data Flow Task
Validating: 50% complete
End Progress
Progress: 2006-02-10 09:50:57.43
Source: Data Flow Task
Validating: 100% complete
End Progress
Progress: 2006-02-10 09:50:57.43
Source: Data Flow Task
Prepare for Execute: 0% complete
End Progress
Progress: 2006-02-10 09:50:57.43
Source: Data Flow Task
Prepare for Execute: 50% complete
End Progress
Progress: 2006-02-10 09:50:57.43
Source: Data Flow Task
Prepare for Execute: 100% complete
End Progress
Progress: 2006-02-10 09:50:57.43
Source: Data Flow Task
Pre-Execute: 0% complete
End Progress
Warning: 2006-02-10 09:50:57.43
Code: 0x80070003
Source: Data Flow Task Source - NATNLACCTS [1]
Description: The system cannot find the path specified.
End Warning
Error: 2006-02-10 09:50:57.43
Code: 0xC020200E
Source: Data Flow Task Source - NATNLACCTS [1]
Description: Cannot open the datafile "Q:BINATNLACCTS".
End Error
Error: 2006-02-10 09:50:57.43
Code: 0xC004701A
Source: Data Flow Task DTS.Pipeline
Description: component "Source - NATNLACCTS" (1) failed the pre-execute phase and returned error code 0xC020200E.
End Error
Progress: 2006-02-10 09:50:57.43
Source: Data Flow Task
Pre-Execute: 50% complete
End Progress
Progress: 2006-02-10 09:50:57.43
Source: Data Flow Task
Cleanup: 0% complete
End Progress
Progress: 2006-02-10 09:50:57.43
Source: Data Flow Task
Cleanup: 50% complete
End Progress
Progress: 2006-02-10 09:50:57.43
Source: Data Flow Task
Cleanup: 100% complete
End Progress
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 9:50:56 AM
Finished: 9:50:57 AM
Elapsed: 0.985 seconds
NULL
Running eval. edition of Sql Server Standard 2005. "Insufficient product level" error is thrown during validation phase of an OleDBCommand data flow task. This task type is not licensed in Sql Server 2005 standard? The component runs a very simple sql update statement against a one row table in Sql Server 2005.
If it works from BIDS, should it not work from dtexec.exe on the same box?
Does dtexec run under the security context of the logged in user?
Thanks,
Ken
I have this problem executing an SSIS pkg using dtexec.
dtexec /f d:smappsssis_pkgsdts_SOAR.dtsx /REP E
Code Snippet
Started: 10:28:58 PMEnd Error
Error: 2008-03-03 22:28:59.00
Code: 0xC0202009
Source: dts_SOAR Connection manager "SourceConnectionExcel"
Description: An OLE DB error has occurred. Error code: 0x80040154.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
End Error
Error: 2008-03-03 22:28:59.00
Code: 0xC020801C
Source: Data Flow Task Source - CHANNEL_DATA [1]
Description: The AcquireConnection method call to the connection manager "SourceConnectionExcel" failed with error code 0xC0202009.
Code Snippet
However, it runs fine when I double click the package and execute it using the Execute package utility. That really puzzles me.
The package transfers data from worksheets in excel to SQL Server 2005 DB.
Both source and destination are on the same system.
Please advise.
Hello,
I have a command line as following, with DTEXEC to launch the execution of a package and to set a value (13335) of an user variable called CIB (string type):
dtexec /f c: empPackageInsert.dtsx
/set PackageDataFlowTask.Variables[Utilisateur::CIB].Properties[Value];13335
But I have got an error message saying that the object is not known in the package. My variable does exist in the variable window of the dataflow part.
Thank you for telling me what to set so that the variable can be set by the command line.
Regards,
Marie-Thérèse
i am using dtexec in command prompt
it always prompt the path is not valid and error is 0x80070057
below is what i input
dtexec /dts c:ssis******.dtsx
what's wrong? thanks
I understand to schedule an SSIS package to run, I need to use the dtexec utility. I want to schedule the job right within SQL. I walked through how to set up the job, but I really could not decipher the proper syntax to use as a Step.
I have the following:
dtexec /File "C:...file.dtsx"
Is the the proper way to schedule and execute an SSIS package or is there some other way I should be doing this. The pacakge will run unattended nightly. I am using SQL Server 2005.
Thanks for the information
Folks:
I have lots of Stored procedures in which we use 'dtsrun' to run DTS Packages. Now, after I upgrade the server to SQL 2005 will I have to change all the Stored procedure's to reflect 'dtexec' instead of 'dtsrun'?
Thanks !
Hi
I have a SSIS package which pulls files from a network share and loads data into SQLServer Database. When I execute the application using DTExecUI , It runs fine without any issues , but where as when I run it using the command line arguments, It seems to go in sleep mode and nothing happens. I need to kill the package from Task manager.
Following is the command I use to run my application
Dtexec /FILE "N:TempLoadFirewallData.dtsx" /CONFIGFILE "N:TempLoadFirewallData.dtsConfig" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING EWCDI /SET "Package.Variables[User::RunID]";41
Regards
Meghana
This was directly from BOL.
/Conf[igFile] filespec
(Optional). Specifies a configuration file to extract values from. Using this option, you can set a run-time configuration that differs from the configuration that was specified at design time for the package. You can store different configuration settings in an XML configuration file and then load the settings before package execution by using the /ConfigFile option.
Does this mean that I can specify which configuration file to use during runtime?
Or is just because I'm too desperate for that, I understood that way
Thanks
Hi,
The DTEXEC Utility has the capability of returning ReturnCodes which have specific meanings e.g.
ReturnCode=3 means: The package was canceled by the user.
Is it possible to set my own ReturnCode values?
For example, my Package contains a Script Task which contains code to search a folder for a file. If the file cannot be found then I make the Script Task fail and hence the Package fails. But, when the Package is invoked by the DTEXEC utility, then the ReturnCode is always set to 1. Is it posssible to set the ReturnCode from within the Package (in, say, a Script Task in the Event Handler) to a different value?
It is necessary to be able to set custom application-specific return codes because these return codes are passed to the Batch Scheduler which alerts Operations (Support) staff in the event of failure. Meaningful (custom) ReturnCodes expedite problem solving and are (usually) mandatory in large production environments.
If it is not possible to make a Package return my own returncodes via DTEXEC then can you suggest alternative solutions, please?
Thanks.
Hi!
When i excute in the sql server this works fine
xp_cmdshell 'dtexec /f "D:SSISProjectIntegration Services Project1ArchiveTicket.dtsx "'
but when i excute throught the C# code
jobCommand = new SqlCommand(@"xp_cmdshell 'dtexec /f "D:SSISProjectIntegration Services Project1ArchiveTicket.dtsx"'", cconn);
It shows up red lines near the " and ' qoutes. I know that quotation marks are wrong but don't know how to solve it.
some help please
Thanks
jas
Hi All,
I'm trying to execute DTExec from a workstation and I got some help from a different group without luck maybe someone here can help me.
This is what I try so far.
1. My package run in command line from my sql box using dtexec with
parameters.
2. Set the package with DontSaveSensitive and import into IS under MSDB with
the same option setup.
3. Set package role to public.
4. Share DTS folder with everyone permission just for testing.
5. Execute the package from a workstation using
//sqlServerbox/DTS/BINN/dtexec /dts "msdb/mypackage" /SER "MySQLServer" /set
package.variables[myvariable].Value;"myvalue1,myvalue2"
(myvariable is string and I can pass multiple values separate by commas)
6. Still getting error:
Error: 2007-02-09 10:31:34.31
Code: 0xC0010018
Source: Execute DTS 2000 Package Task
Description: Error loading a task. The contact information for the task
is "E
xecute DTS 2000 Package Task;Microsoft Corporation; Microsoft SQL Server v9;
? 2
004 Microsoft Corporation; All Rights
Reserved;http://www.microsoft.com/sql/supp
ort/default.asp;1". This happens when loading a task fails.
End Error
Anyone has any ideas?
Any help will be appreciate it. Tks in advance...
Rgds
Johnny
I can't crack this problem and my Google-Fu is failing me. I am using DTEXEC from a stored procedure to set a global variable in an SSIS package and execute the SSIS package, but I am getting an error. I will include the SQL code and the error that I am getting:
Code:
exec xp_cmdshell 'dtexec /SQL "Maintenance PlansSynchronizeWithProduction" /SERVER servernameinstance /USER user /PASSWORD password /SET Package.Variables[User:electMail].Properties[Value];1'
Error:
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
NULL
Started: 3:17:02 PM
Warning: 2008-03-13 15:17:02.76
Code: 0x80012017
Source: ProductionToDevelopment
Description: The package path referenced an object that cannot be found: "Package.Variables[User:electMail].Properties[Value]". This occurs when an attempt is made to resolve a package path to an object that cannot be found.
End Warning
DTExec: Could not set Package.Variables[User:electMail].Properties[Value] value to 1.
Started: 3:17:02 PM
Finished: 3:17:02 PM
Elapsed: 0.375 seconds
NULL
All the examples I find over DTEXEC seem to follow what I am doing in the code and making variables in an SSIS package isn't rocket science, so I don't understand where I am going wrong.
I have seen people suggest indirect configuration as a solution, but when I set it up (using the environmental variable TEMP from the dropdown) it doesn't seem to help anything. I have used the exact path from the configuration wizard, though, so I'm pretty sure I have the path right.
Can anybody spare a clue?
HI, with a dataflow that has delay validation property = true, DTExec will not try to validate it when I call it with /validate option. Is there a way to see if the dataflow validate even though the delay validation property is set to true?
Thanks,
It was quite strange with dtexec....
The problem started with my package being scheduled under the SQL Agent.
I have two packages... one with simple SQL tasks and another with complex loop,sql tasks and activex scripts. Both using the XML configuration files for those DB Connection strings, user names and passwords.
First I tried to schedule the two packages under Sql agent using SSIS steps.
Both failed and I found out that I should set the ProtectionLevel to non-default.
So I set the protection level to 'DontSaveSensitive' and it works fine with the first package but the second package failed. After I tried many way (changing configuration files, setting and reinstalling the packages inside SQL DB etc..) I found a blog that I should try with CmdExe step in Sql agent scheduler rather than SSIS step. So I tried but still failing. the message said dtexec could not find the configuration xml file. Even I tried in the command prompt with the same command, it couldn't find the configuration. If I went into the directory where the configuration files are stored and run the command, it run fine. Seem like dtexec could not read the configuration from other directory. but still the sqlagent is failing...
Somebody have a clue?
rgds,
KyawAM