Hi all
After i configure the Merge Replication, my sql server services wont start again.
The error show that "The request failed for the service did not respone in time fashion. Consult the event log or other application error logs for detail"
I have a client server application and it is running in the following configuration: SERVER A: MS Server2003 with MS SQL2000, Our ERP application software is installed on this server as is MS SQL200.
Server B: is our e-commerce server and it is running MS Windows2000 server OS and no MS SQL. The e-commerce application is pointed to the active SQL server on server A. I am trying to run a software version upgrade on on software application (which was successfully run on server A) When we try to run this upgrade on server B we get a message: " Setup is unable to start MS SQL Server Services, please start and try again"
I do not understand what is going on with this. SQL & SQL Service Agent is running on Server A. Any suggestions as to what I need to do?
www.accellus.com
Running MS SQL 2005 SP1 on Windows 2003 Server SP1 (IA32). Upon rebooting, I get an error that this service failed to start, and when I attempt to start manually, I get the same error:
Could not start the SQL Server Integration Services service on the Local Computer.
Error 1053: The service did not respond to the start or control request in a timely fashion.
Any ideas?
hi,
after installing sp1 for sql server 2005 the sql server integration services did not start. and i can`t start them manually. the installation succeeded without problems (both sql server and sp1)
the only problem was with installing sql server 2005. in the sql server configurations manager the following protocols were disabled:
- named pipes
- tcp/ip
- via
- shared memory was enabled
is this a problem. because in the "how to verify installation of sql server" is written, that tcp/ip has to be enabled. however i can manually enable it.
i can`t start the sql server integration services manually. so what can i do? i also tried reinstall sql server but i do get the same error.
hope somebody can help me!
SQL Server Reporting Services 2005 Service would not Start on windows server 2003. Working great till yesterday and no changes were made to config file.
Here is the error in Event log
Event Type: Error
Event Source: SQL Server Report Service
Event Category: None
Event ID: 0
Date: 12/13/2007
Time: 8:25:59 AM
User: N/A
Computer: XXXXXXXXXXX
Description:
Service cannot be started. Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information.
at Microsoft.ReportingServices.Library.ServiceAppDomainController.Start(Boolean firstTime)
at Microsoft.ReportingServices.NTService.ReportService.OnStart(String[] args)
at System.ServiceProcess.ServiceBase.ServiceQueuedMainCallback(Object state)
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Here is i found in log files
ReportingServicesService!resourceutilities!4!12/13/2007-08:25:59:: i INFO: Running on 0 physical processors, 1 logical processors
ReportingServicesService!servicecontroller!4!12/13/2007-08:25:59:: e ERROR: Exception caught loading and setting code permissions policy level: System.Security.XmlSyntaxException: Invalid syntax on line 158.
at System.Security.Util.Parser.GetRequiredSizes(TokenizerStream stream, Int32& index)
at System.Security.Util.Parser.ParseContents()
at System.Security.Util.Parser..ctor(Tokenizer t)
at System.Security.SecurityManager.LoadPolicyLevelFromStringHelper(String str, String path, PolicyLevelType type)
at System.Security.SecurityManager.LoadPolicyLevelFromString(String str, PolicyLevelType type)
at Microsoft.ReportingServices.Library.ServiceController.SetAppDomainPolicy()
ReportingServicesService!servicecontroller!4!12/13/2007-08:25:59:: e ERROR: Error Starting Service: System.Security.XmlSyntaxException: Invalid syntax on line 158.
at System.Security.Util.Parser.GetRequiredSizes(TokenizerStream stream, Int32& index)
at System.Security.Util.Parser.ParseContents()
at System.Security.Util.Parser..ctor(Tokenizer t)
at System.Security.SecurityManager.LoadPolicyLevelFromStringHelper(String str, String path, PolicyLevelType type)
at System.Security.SecurityManager.LoadPolicyLevelFromString(String str, PolicyLevelType type)
at Microsoft.ReportingServices.Library.ServiceController.SetAppDomainPolicy()
at Microsoft.ReportingServices.Library.ServiceController.StartService(Boolean firstStart)
I have noticed that analysis services has stopped on two instance on my server.For the first instance, I go to configuration manager and try to start the service I get the standard service did not respond in a timely fashion error, if I change the account that runs it from the domain user account to local system it starts up fine, but try changing it back I get the following WMI error: The server threw an exception. [0x80010105], I see this error in google but it always refers to the agent and not analysis services. In the application log, I see the following error...The service cannot be started: Message-Handling subsystem: The message manager for the defaul locale cannot be found. The locale will be changed to US English. File system error: The following error occurred during a file operation: Access is denied. But access denited to what? The services had been up and running for a while and nothing on the server has changed.
As on the second instance gives me the following error in the application log...The file <path>CryptKey.bin' could nor be opened. Please check the file for permissions or see if other applications locked it.
Then further up...The service cannot be started: Message-Handling subsystem: The message manager for the defaul locale cannot be found. The locale will be changed to US English. File system error: The following error occurred while opening the file <path>CryptKey.bin.
I should say the <path> part is me, saving typing not part of the error. And again, if I change the account running the service to local system if all changes and starts fine, but if I try to change it back I get WMI Error: The process terminated unexpectedly [0x8007042b]. If I hit 'apply' a second time I get another WMI Error, except this time it says 'The server threw an exception. [0x80010105].
while failover from one node to another node in cluster environment. cluster node is moving to another node but my SQL server services are not started.in event viewer i am getting bellow errorr event id 19019
[sqsrvres] StartResourceService: StartService (MSSQLSERVER) failed. Error: 42d
[sqsrvres] OnlineThread: Error 42d bringing resource online.
I am new to SQL Server. I tried to read as much as possible in newsgroups prior to this post. I have tried several different ways to install this without success. The last time I attempted to install as a local service and I unchecked hide advance configuration. I am running Windows XP SP2 with all the latest updates. Is there a solution to install this properly? Any help would be greatly appreciated!
View 13 Replies View Related
We encountered an error the other day that was causing us major head-aches trying to resolve.
Error: 1053 -- Could not start the SQL Server Integration Services service
In addition to SSIS not starting up, we had errors trying to launch Management Studio.
The above errors started happening after we deployed a small release that included editing the machine.config file.
To make a long story short, make sure the machine.config file is well formatted and is not missing any double quotes (") or < /> .
Hopefully this information can help someone out.
Hello everyone.
I have a question about granting enough rights to allow a non admin user to start and stop a sql server service via the SQL Server Management Studio by right clicking on the server node.
I have changed the acl's of the SQL Server service security and gave the user rights to start and stop the service. This does allow them to connect remotly to the server using computer manager and they successifully start and stop the service. But, in SQL Server Management Studio the option still does not show up, unless he is a admin of the server.
Does anyone know what other security settings I need to address for the start and stop to show up when I right click on the server node?
Thanks for any help
Sorry for the newbie question here:
I've just installed VS.NET and have installed MSDE. All has gone well so far. I followed the instructions for setting a db password during install and the installer seemed to do its job. The SQL Server Service Manager runs in the taskbar when I reboot but the status icon is a white circle... The status bar indicates that it is not connected.
How do I connect to the server?
Hi friends,
I have quick question. Ihave a job which consists of 9 steps. 9th step is:
Exec xp_cmdshell 'c:mssql.bat'. in this batch file I am stopping and starting SQL services using net stop and net start command. This job is running perfectly but it is not giving the job history when I right click the job and view job history I can't see anything where as if I check the checkbox for Show step details it showing first 8 steps information but it is not showing 9th step information. Even I checked the Sysjobhistory system table in MSDB it shows only 8 steps information.
What is the reason....
Thanks,
Mohammed.
Hello.
Is there any way to schedule stop and start of NT services
at a particular time daily.
For eg: If i have a service by name TemServer and if i need to stop
that service each night at 9:00 and restart as soon as it stops.??
And Is there any way to start and stop the services of NT from
workstation. Each and every time i am going to the server room for
stopping the service and restarting.
Any suggestions and comments are always welcome.
Advance Thanks
MAK
Hello,
I cannot run the sql server 2005 analysis services from my configuration manager. I noticed this today for the first time but I don't think I changed something special since last week.
I found the log file in C:Program FilesMicrosoft SQL ServerMSSQL.2OLAPLog but I can't post it here since it's too long and I found this :
Message: Erreur OLE DB : Erreur OLE DB ou ODBC . (Source: \?C:Program FilesMicrosoft SQL ServerMSSQL.2OLAPLogmsmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210003)
This repeats many times in the middle of the file but there is no date on it so I can't say if it helps.
If this isn't the good one, please can you tell me where to find the log that can help resolve the problem.
Thanks for your time,
Véronique
I am not able to start Integration services on my windows 2003 machine. I get the below error. The request failed or the service did not respond in a timely fashion. Consult the event log or application error log for details. I am a newbee for MS SQLSERVER. I did not see any errors in the event log. I checked the sqlserver log and found the below message. I am not sure if this could be related. The SQL network Interface library could not register service principal name (SPN) for the SQL service error: 0x2098. This machine is clustered and integration services seems to work without issues on the first node.
View 7 Replies View RelatedHi,
I am not able to start the "SQL Intigration services" service from the services control panel. The error message is: "Error:1053 The Service did not respond to the start or control request in a timely fashion"
And because of this i am not able to connect to Intigration Services from SQL Server Management Studio.
Any idea what is happining?
Thanks,
Venkat
I have installed reporting services from SQL Express SP1 package. OS is Windows 2000 SP4. Just after installation "Reporting services" service has StartMode=Automatic and LogOnAS=LocalSystem as shown in SQL Server Configuration Manager. When system is rebooted reporting services state is Stopped and there is 2 errors in System log:
1. Timeout (30000 milliseconds) waiting for the SQL Server Reporting Services (REPS) service to connect.
2. The SQL Server Reporting Services (REPS) service failed to start due to the following error: The service did not respond to the start or control request in a timely fashion.
If i select "start" from service's context menu then it starting normally and it's state becomes Running.
What can i do to make reporting services starting automatically on system load?
Why I am not able to start the Analysis Services Engine again as the error message from event viewer as:
Event Type: Error
Event Source: MSSQLServerOLAPService
Event Category: (289)
Event ID: 0
Date: 04/07/2007
Time: 10:45:48
User: N/A
Computer: computer_name
Description:
The service cannot be started: Message-handling subsystem: The message manager for the default locale cannot be found. The locale will be changed to US English. Message-handling subsystem: The message manager for the default locale cannot be found. The locale will be changed to US English. The following system error occurred: The filename, directory name, or volume label syntax is incorrect. . File system error: Error occurred during the creation of directory: '\?'.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
On SQL Server, when I start the Analysis services, the error message is : The SQL Server Analysis Services (MSSQLSERVER) service on local computer started and then stopped. Some services stop automatically if they have no work to do, for example, the performance logs and Alerts service.
Why is that? That is really frustrated and please any of you give me any advices or help on it. Thanks a lot in advance.
With best regards,
Yours sincerely,
How to use the "Analysis Services Execute DDL Task" in SSIS to stop or start the Analysis Services.? Many thnaks.
View 5 Replies View RelatedI am new to SQL Server 2005 Reporting Services and I€™m having problems starting the service. I am running a Windows XP SP2 with SQL Server 2005 and reporting services but the service will not start. My SQL Server instance logs on using €˜Windows Authentication€™ using a username sysadm with no password
I have installed IIS and made sure that ASP.net is running.
I have opened up the Report Services Configuration Manager and amended the settings but I€™m unable to get the service started!!!
Theses are my settings
i) Report Server Virtual Directory OK
Name: ReportServer1
Website: Default Web Site
ii) Report Manager Virtual Directory
Name: Reports1
Website: Default Web Site
iii) Windows Service Identity
Service name: ReportServer
Service Account: NT AuthorityLocal Service
Iv Web Service Identity (NOT WORKING)
v) Database Setup
Servername €“ Nameofmyserver
Database name - ReportServer1
Credential Type Server Credentials
When I click on start no error message appears, it just seems to time out.
I need getting the HH:MM:SS format when we do datepart.
For example, am using a variable to capture the time taken to execute the package using Start and End time stamps captured.
I would like to get the HH:MM:SS format of the datediff.
I have a sheet of mailing labels in which the first three rows have been used. Â I want a parameter or something when running an SSRS label report where I can specify what row to begin printing on and how many rows I want to print. Â Is that possible?
View 8 Replies View RelatedI need to remove username and password when start  SSRS website.
View 4 Replies View RelatedHow do you write an expression in report builder to only display the results that start with a certain string value..eg. Project Number - CUP1501, DPR1502, ENG1507 etc. These values will all get returned but I only want the Project Number that has CUP and DPR in it?
View 2 Replies View RelatedI have a ssrs report which has a parameter start date.i have made 12 columns acc to client req which i cannot change:
jan|feb|mar|apr|may|jun|jul|aug|sep|oct|nov|dec
These columns are dynamic acc to start date for which i have used this exp for first cell:
=monthname(month(Parameters!Startdate.Value),true) and for next 11 cells accordingly.
These 12 columns are grouped quaterly which i have made statically again for clien req which i cannot change so they are grouped staticaly by me in report like:
q12015 Â Â Â |q2 Â 2015 Â Â |q32015 Â Â Â |q42015
jan|feb|mar|apr|may|jun|jul|aug|sep|oct|nov|dec Â
exp for quarterly is :
="Q" & DatePart(DateInterval.Quarter, Parameters!Startdate.Value) & Â year(Parameters!Startdate.Value).
Now when i select my start date of months jan,apr,july and oct report work fine.... but when i select my start date months of feb,may,aug and nov then reportis something like: (lets say i choose feb)
q12015 Â Â Â Â |q22015 Â Â |q32015 Â Â Â |q42015
feb|mar|apr|may|jun|jul|aug|sep|oct|nov|dec|jan.
What is happening is in q1 feb,mar and apr are coming and what i want in q1 is jan,feb and mar.
And in q4 nov ,dec and jan is coming and what is want in  q4 is oct,nov and dec.
So generally what is am asking is how to display jan in this condition in my first cell.same apllies for rest of months..
Similarly when i select my start date months of mar,june,sep,dec i want previous two months to be displayed.
Is it possible to have a custom start date parameter on a report? I would like to have a cumulative daily report for the week, Friday to Thursday. The final daily to run on the Friday, then the next week begins. Â I have a enddate, which is today()-1 (for previous day); I need a start date to be variable.

In other words,
On a Monday, report pulls data from last Friday to Sunday;
On a Tuseday, report pulls data from last Friday to Monday,
On a Wednesday, report pulls data from Friday to Tuesday, etc,
until on Friday, the report pulls data from last Friday to Thursday.
Sorry if this is a simple question, I've not seen any similar posts.
I'm just finished installed SQL 2005 on Vista Business edition (first time for both). I subsequently installed SP2 for 2005.
Upon completing the SP2 installation, the SQL Server Surface Area Configuration manager opened asking me to grant admin rights to the account I used to install the software. The account I used is the local admin account on the machine (only account on the machine as this is my dev box) .
Nothing shows in the two boxes below on this dialog, "Available Privelages" is blank and "Privelages granted is blank".
In addition, if I go to SQL Server Configuration Manager, and click on SQL Server 2005 Services, nothing shows in the right pain. It's as if the software installed, and yet no instance of the database exists or is running.
My thought was that the admin account I used to install the software doesn't have sufficient privelages to to start the SQL Server or SQLBrowser. So I went to computer management, Local Users and groups (machine isn't on a network yet), and made sure this same account is part of the administrators group.
Any ideas on how I should solve this?
I have a detailed report in ssrs in which data can come from start date and end date parameters.but the problem is. for example i gave startdate as 01/01/2015 and end date as 09/31/2015 then the data must be in displayed in such a way that jan month in one tab and feb month data in one tab and so on to sep month data in new tab when i export to Excel.
View 3 Replies View RelatedI made one report in SSRS 2008 in which getting data from one SharePoint List.
three parameters in report :
Country
StartDate
EndDate
I am using query which I created with CAML.
query is running well and data is coming correctly if I run this on Query designer.and date format must be YYYY-MM-DD.but when I try to run through on run time then the date control is showing format dd/mm/yyyy.
I change the regional settings of windows and SharePoint site to English(United States). and when I select date control it is also putting date in format like "YYYY-MM-DD'. and in that format report is working well in Query designer view.But on run time still it is not working.
I'm using SQL Server 2008 R2 BIDS to accomplish this.
View 7 Replies View RelatedAt the moment I already added the DataSet I'm gonna be using. I have 2 date parameters Start Time and End Time.
What I would like to do  for the report is to only pull results greater than 48 hours to the report
How can I accomplish this?
1) RS Start in Window Severvices
2) RS Start in Configration
1) and 2) Is Same?
I think that It looks like same Operation.
In the last step of installing the SQL Server 2005 Express edition I get the following error:
Doing Action: Do_sqlScript
PerfTime Start: Do_sqlScript : Thu Jun 21 19:38:35 2007
Service MSSQL$SQLEXPRESS with parameters '-d"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamaster.mdf" -l"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamastlog.ldf" -m SqlSetup -Q -qLatin1_General_CI_AS -T4022 -T3659 -T3610 -T4010' is being started at Thu Jun 21 19:38:35 2007
Service failed unexpectedly (1814)
Error Code: 0x80070716 (1814)
Windows Error Text: The specified resource name cannot be found in the image file.
Source File Name: sqlsetuplibservice.cpp
Compiler Timestamp: Wed Jun 14 16:29:04 2006
Function Name: sqlservicetart
Source Line Number: 301
---- Context -----------------------------------------------
Do_sqlScript
SqlScriptHlpr
Start service MSSQL$SQLEXPRESS
Error Code: 1814
MSI (s) (80!08) [19:39:58:265]: Product: Microsoft SQL Server 2005 Express Edition -- Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (1814) The specified resource name cannot be found in the image file.
.
Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (1814) The specified resource name cannot be found in the image file.
.
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='203'>
Doing Action: Do_sqlScript
PerfTime Start: Do_sqlScript : Thu Jun 21 19:39:58 2007
Service MSSQL$SQLEXPRESS with parameters '-d"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamaster.mdf" -l"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamastlog.ldf" -m SqlSetup -Q -qLatin1_General_CI_AS -T4022 -T3659 -T3610 -T4010' is being started at Thu Jun 21 19:39:58 2007
Service failed unexpectedly (1814)
Error Code: 0x80070716 (1814)
Windows Error Text: The specified resource name cannot be found in the image file.
Source File Name: sqlsetuplibservice.cpp
Compiler Timestamp: Wed Jun 14 16:29:04 2006
Function Name: sqlservicetart
Source Line Number: 301
Any idea how I can fix this?