Hi
I have three params p1 , p2 and p3.
All 3 are non queried with values Yes and NO .
if p1 is yes only i have to enable the remaining twp params otherwise disable them.
Can some one suggest as to how this can be achieved.
Thanks
Hi All
I am using RS 2000. I used 2 input parameters for one of the report. The 2nd parameter is based on the 1st parameter. i.e. First Parameter is Country and 2nd Parameter is State. Based on the Country selection the list of states for the selected country will get displayed. This is working fine in Reporting services as well as report server. When deploying into the application it doesn't work.
If you have solution for this I would like to share.
Regards
Venkataraman M
ramanmahalingam@hotmail.com
Hi
I am doing report development against cube (OLAP) and I have several parameters. My second parameter is to be filtered based on the first parameter (kinda like cascading), but how do we achieve this in a cube environment? Lets say I have param1 and param2 in a dataset. I want Param2 to show the locations only based on what I select in Param1. Hope this helps. If you have questions, please let me know.
hi all,
In my report I want to make certain parameters to depend on the previous parameters. I think we can use those as cascading parameters. How to make a parameter a cascading parameter? and how to use those cascading parameter ? It would be nice of you if you can help me.
Thanking you,
Lekshmi
I have a report that is based on 2 listboxes, the second one's values dependent on the value selected in the first box. How would I display all values in both list boxes on the report if I so decided?
Thanks,
The Rook
I have 2 parameters that are of type string. The user can enter anything they want in them. The third parameter is query based and uses the first 2 parameters to get a list of people. Is there a way I can prevent the third parameter from propigating until the first 2 are both filled in? The first 2 cannot be drop downs however, they are used in a wild card fashion.
Thanks!
Hi,
I have a listbox which selects distinct brands from the products table.
Then another list box which lists all the orders with order description. Each order has a unique system generated ORDERID and the user provides the orderdescription which could be duplicate.
Depending on the Brand selected by the user in the earlier list box, only those orders containing the the brands in order details files should be available for selection in the list box.
e.g. BRands Lisbox shows: Cream A, Cream B and Cream C
If the user selects 'Cream A', then the next list box shows orderdescription as 'Cream A order for regular sale','Cream A order for exhinition sale', 'Cream A order for exhibition sale'
The problem here is that if the user selects a description which is duplicate (could be the case), then the system brings back the wrong order details.
How is it possible to allow a user to select a order description but search on the OrderID?
Thanks for the help
regards
josh
Hi,
I am using SQL Server 2005 reporting services. I am having a problem with Cascading Parameters. In my report there are 4 parameter . (Product Class, Product Type, Product SubType and Activites). when user open the report page he/she will have to select a value for product class depending on the selection Product Type and Sub type will be populated. So far its good, but Activities also depends on the Product Class. My question is can we have 2 parameters depend on same parameter. Here in this case Product Type and Activities both depend on the Product Class. I want only those activies in the dropdown which belongs to the Product Class that is selected.
Can anyone please give an ideas?
Thanks
Ashwini
Hi,
I have the folowing problem with RS2005.
I have 2 parameters in my report. Firs one is a list of projects which is a single select. The second one allows to select multiple employees.
When I select a project from the first parameter, the list in second parameter gets narrowed to list of employees that are assigned to this project.
The unexpected behaviour:
1. I select "Proj1" from first parameter
2. The second parameter gets narrowed. I select "Select All" employees
3. I generate my report. OK
4. I change the selection in first param to "Proj2"
5. The second parameter gets narrowed, but employees that are common for "Proj1" and "Proj2" are still selected, which is unwanted. ERR
The users of this report gets confused as they generate the report just after point 4. and they think all employees are still selected.
What I want to do is uncheck all employees from second parameter every time the first one is changed. That would cause the user to get a prompt for selecting second parameter.
Is there a way I can do this? Any clue would be nice.
Best Regards.
Hi,
I have a problem with cascading parameters. I have 10 parameters in my report.
Parameters 1, 2, 9 and 10 are independant. Parameters 3 to 5 are cascading parameters as well as parameters 6 to 8.
Parameters 3 to 5 have no relationship with 6 to 8. But when I change the value for parameter 3 the values for parameters 4 to 10 are reset ???! I don't understand why, only parameters 4 to 5 should be reset.
Can someone please tell me how to avoid parameters 6 to 10 being reset ?
Hi,
I have 3 parameters in a report related with each other, but using them makes the report go extremly slow... is this a known bug? I have been reading about the problem with postbacks and stuff is this the problem?
Any workaround or fix for this?
Best Regards,
I have the following conundrum:
I have a report that utilises 3 cascading report parameters: region, area manager and business manager. They are in the correct order in the list of report parameters i.e. region then area manager then business manager.
When I select the region, then an area manager within that region, after having made the selection the area manager dropdown list changes to some arbitrary choice.
I also have a textbox equal to the label value of the area manager report parameter and this label displays something entirely different from my choice and the one that seems to be the "default".
Please note that I don't have any actual defaults for the parameters.
My question is why does the area manager dropdown change after the postback from my choice to something other?
Hi all,
did any of you had the same issue ? how can I add cascading parameters to my report from the SAME hierarchy?
If I have 4 levels in hierarchy- according to level 1 - filter level2 (param2), then according to level 2 - filter level 3 (param3).
any ideas ?
Thanks in advance
I need the ability to choose between quite a few cascading olap time query parameters for a report without my creating a report or subreport for every combination of these parameters. If the recordset were smaller perhaps I could filter it when it's passed back to the report but it's a few million. Will switching to expression-based command text and building the mdx queries in code work? I would like to be able to tell rs to remove the parameter from the query if no selections are made.
View 2 Replies View RelatedHi,
I am currently working on a report with 3 cascading parameters. These three parameters depend on the datasets whose data are retrieved from a large table with SELECT DISTINCT. As the table grows larger, selecting values for these parameters cause postback, and slow in performance from user perspective. I am looking for a way to reduce postback. Can anyone suggest the way to retrieve the dataset all once and filter the dataset without causing postback? Or any other way to improve the performance will be greatly appreciated.
Thanks,
NL
In the standard report manager I'm running a report with 5 parameter choices. The first 3 are determinants of the 4th, and the combined 1-4 determine the 5th.
Although this works fine in my VS BIDS (sp1) with SQL 2005 sp2 CTP, when I deploy it to my sp2 CTP Report server, it throws an error as soon as I select the 3rd parameter.
One or more data sources is missing credentials
I found this answer from MS in another thread (http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=923684&SiteID=1) and since it deals with my problem, wanted to pass it along to anyone else that is dealing with this problem.
" This is a known regression with CTP2 that will be fixed before SP2 is released. The problem is not specific to multivalue parameters. It has to do with dependencies between parameters.
In some cases, you can work around the issue if you give the dependent parameter a default value. You can also work around the issue by removing the valid values dependency between the parameters, though this may not be possible for a given report."
The suggested workaround does work! I can get beyond the 3rd parameter now because I applied a default value!
Hello,
I was trying to do cascading parameters based off my cube and I wasn't able to do this. Is it possible?
For example, I have a dimension that has Products so I first select the parameter for product type (Dairy, Frozen, Candy) and then I have another dropdown listbox that has the name of each product (Milk, Ice Cream, Lemon Drops). The second dropdown listbox should only contain the products that match what parameter was selected in the first dropdown.
When I couldn't get that to work, I went to the source system containing the Dimension tables and just did nice and easy SQL statements from there. It worked but I, for some reason that I can't explain, think this is not the proper way to do it.
Also, is there a way to have a default on the second parameter based on the first parameter selected? I would assume that default would be [All].
Thank you.
-Gumbatman
I have 5 cascading parameters. They all have default values. I would like the default value of each of these to be selected when the report opens.
It currently works correctly when I preview the report, however when I deploy the report to the server it does not. In the deployed report, the default value of the first parameter is not selected. However, when I select a value for this one, on postback the rest of these parameters get set to their default value. They're all configured the same. I'm confused as to why the first one doesn't default to its default value while the others do.
Got any ideas?
Here's how I have it configured:
Allow null value CHECKED
Allow blank value CHECKED
The rest are unchecked.
Available values: From query
Default Values: Non-queried with a value supplied that exists in the dataset.
Hi,
I would like to set up cascading report parameters but need to supply the list of values in my dataset query as they are not being pulled from a table or stored procedure.
I would like to set up something like
select 'LS' Source
Union
select 'RH' Source
Union
select 'UK' Source
as the value list for my first parameter, then, I would like the second parameter to default to '1' if the first parameter has 'RH' or 'UK' selected but default to blank if the first parameter has 'LS' selected. I can get all to default to blank or 1 but can not seem to make it dependent.
thanks!
Martha
I am using SSRS 2008 with a SQL Server 2008 R2. It's been many years since i have used SSRS but i have used this and some other reporting tools in the past.I have created a cascading parameters where upon selecting 'ALL' or one of the other values in parameter A , the other values gets displayed in paramter B which is working in the Report builder. i am handling this in the dataset query where i handle that through a case statement ( something like WHERE 1 = (CASE WHEN @Prm_A = 'ALL' THEN 1 END) OR column_X= ( CASE WHEN @Prm_A <>'ALL' THEN @Prm_A END ).Also tried WHERE @Prm_A = 'ALL' OR column_X= @Prm_A
This seems to work in the report builder on my machine or when i run it by editing the report on the web, but when i publish it on the report server, i don't see that behavior, meaning it does not cascade. I also tried to simplify it by making the query simple(WHERE column_X= @Prm_A ), but it still would not cascade on the web.
Hello,
since some hours I'm struggling with 2 multi-value cascading parameters which default values should be always "Select ALL"
First Parameter:
available vlaues: From query
dataSetsGetCountry (defined as select from tblCountries)
ValueFied:ContryName
LabelField:CountryName
DefaultValues: from Query
dataSetsGetCountry
ValueFied:ContryName
SecondParameter:
available vlaues: From query
dataSetsGetAreas (stored procedure which parameter is the list of the selected countries)
ValueFied:AreaName
LabelField:AreaName
DefaultValues: from Query
dataSetsGetAreas
ValueFied:AreaName
First time I open the report
the first and the second parameters are properly filled and for both parameters "select all" is checked.
I select one option from the first parameter, the second parameter's content change dinamically and "Select All" option is still selected !Cool
Now I change the selection on the first Parameter, by checking AN ANOTHER item from the list , the second parameter list refresh dinamically but "Select all" IS NOT selected and only the item that were previously checked kept the selection !!!NO!!
Is this a bug in Reporting services and I have to say to ther user that is not possible to develop what they would like to have or there is , even programmatically, a way to solve it?
Thankx for any helps!
Marina B
Is it possible to create cascading parameters with in Report Builder? I have done this with Report Designer but i need a solution with Report Builder.
(I need the structure: First the user selects the state, afer the postpack the cirties of the state are listed in another dropdownlist for selection).
Thanks in advance
Hello,
I'm using a SSIS cube as source for reporting services. In my DataSet I have 3 parameters: Year, ProductGroup, Product. By default all parameters are cascading when defined on the DataSet. This is great for ProductGroup -> Product, but I don't want it for Year -> ProductGroup (I want to avoid the roundtrip). I removed the link in the generated MDX, I removed the parameters on the DataSet, but when I run the report, ProductGroup is still grayed out until I choose a year.
Suggestions are very welcome...
I have a Reporting Services 2005 report which uses cascading parameter multi-select drop-down boxes. The report runs perfect after making initial selections. However, each subsequent parameter selection causes the page to refresh to a blank page until the View Report button is clicked. What I would like to happen (which should be the norm) is for the user to be able to make all necessary selections without the page auto-refreshing after each selection. The user would then click the View Report button to regenerate the report. We are currently using reports which contain up to 5 cascading parameters. This becomes very time-consuming when the page refreshes after each selection.
Has anyone come across a solution or code alternative to this problem??
Any help would be most appreciated.
Thank you.
Tony
I'm trying to create report with datasource as a cube. I'm able to connect to datasource to pull data with a single parameter. But, I'm unable to succeed in creating a cascading parameter.
The following scenario:
I have a dimension "Period" as Paremeter.
The Period dimension is cascaded to year- quarter- month.
So, I would like to create a cascading parameter for period as year - quarter - month.
Please let me know, how to acheive this.
thanks,
Naveen.
I have created two report parameters and want them as Cascading. District Parameter depends on Region Parameter which should allow Multi selection. When I select single value in Region it works perfectly. But when I choose multiple values, District turns out to be a blank text box. I have used the In clause in my code :
SELECT
DISTINCT
SalesDistrict
FROMDistrict(NOLOCK)
WHERESalesRegion
IN(@SalesRegion)
After adding cascading parameters my report which was running earlier is failing. I'm using Report builder 3.0, windows 2008r2, am running the report from the server
Error message "An error has occurred during report processing.(rsProcessingAborted)
Query execution failed for dataset 'LastName' (rsErrorExecutinGcOMMAND)
Incorrect Syntax near ','."
Is there a way where i can look up the code in xml using report builder or some other way so that i can delete the extra '','.
I have two reports.
1. Main Report
2. Sub Report.
I have cascading parameters in 'Main Report'. When i try to pass cascading parameters in to sub-report, I could pass only 'first parameter' value to sub-report.Is there a way that i can pass cascading parameters to the child report?
SSRS - SP2
We have many reports with cascading multivalue parameters. The reports and the parameters work as expected within the BI development and when deployed to the RS server. The issue we are having is that when we go to the Report Manager webpage for one of these reports and create a New Subscription the report parameters in the subscription field fail to populate. The first one or two parameters may properly populate but the 3rd, 4th, and 5th fail to populate. As a result we can not select the parameters to submit the subscription.
We have two example reports where one report uses only sql (text) and the other report uses only stored procedures. Both reports have 2 or more cascading parameters.
Any known issues with cascading multivalue parameters in the Report Manager subscription view?
I am creating a report where there are 3 tables in one report which have visibility set as an expression so that when a certain criteria is selected in the "Report" parameter, a different table is shown below. This works as expected.
When table 3 is shown, I want a new parameter to be visible to the user called "Ward" where the user will select the ward they are interested in and the table will display data below just for the ward selected. However, I don't want the ward parameter visible when either of the other 2 options are selected. Is this possible and how to do this?
I need to implement my cascading deletes on a SQL database. Is it better (performance/reliablility-wise) to use the Foreign Key Cascading Deletes or to just write my own triggers to do the deletes?I was hoping someone had experimented and found which works best.
View 2 Replies View RelatedA have a multi-valued parameter (B) which is dependent on a single-valued parameter (A) on my report. When a value is selected in A, I want all matching values in B to be selected by default and the "Select All" option checked. To do this I have set the Default Values section in B to point to the same dataset as the "Available Values" section. Both A and B have default values so the report runs automatically.
One of the values in parameter A (say Value1) yields more values in parameter B than the other (say Value2).
If I run the report the first time with Value1 selected as the default for parameter A, all values in B are checked correctly. If I run the report with Value2 selected the first time and then change the selected value to Value2 and run my report, all values in B are displayed but only the values that were previously checked (when Value1 was selected), are now checked, leaving the "Select All" unchecked.
What am I doing wrong? Why are all the values in B not checked? The dataset is the same in "Available Values" section and "Default Values" section.
I use SQL Server 2005I have tables tblUserData, tblUsersAndGuestbook, tblGuestbooktblUserdata contains:UserCode intUsername nvarchar(50)tblUsersAndGuestbook contains:Usercode int (FK to tblUserData)GBEntryCode inttblGuestbookGBEntryCode int (FK to tblUsersAndGuestbook)GBText textNow...if I delete a user in tblUserData I want to also delete the entries in tblUsersAndGuestbook AND in tblGuestbook.I've heard something about cascading delete, but how can i configure that in my database?Or do I manually need to delete all entries from code?
View 2 Replies View Related