Hello, The Database Mail feature is already enabled on the server, also I have a mail account on the other server. The problem I faced is that I need to send mail from my SQL Server using a created email account on the other server. How should I configure my email to do that ? Should I use a sysmail_add_account procedure to enable account, also set profile and profile account ? Does this way creates server mail account that is binded with other email account? The mail should be sent from my SQL Server. Thank You.
I am new to the SSIS package and was trying to figure out how to use SMTP authetication with a 'Send Mail Task' Our company's server requries SMTP authentication for mail. The Send Mail task only allows for Windows authentication.
What can I do to get the SMTP authentication to work for the Send Mail Task? Regards, James Robb
We have an SSIS job that runs once a day and sends emails. For security reasons, IT switched the send-mail porton the smtp server from 25 to a different number (let's say 1234).
So, I changed the SSIS SMTP Connection Manager's smtpServer string to smptserver:1234
However, this does not seem to be working. I keep getting 'Send Mail Failure' error.
Any ideas how to set the port number for sending emails using SSIS?
Lokendra writes "I have configured the Database mail profile and account in Sql Server 2005 but the mail is not sending and showing the following error message:
Error,235,The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2007-03-05T15:16:07). Exception Message: Cannot send mails to mail server. (Mailbox name not allowed. The server response was: Sorry<c/> that domain isn't in my list of allowed rcpthosts.). ),3000,90,,3/5/2007 3:16:07 PM,sa
but while in the same mail set up in previous instance of sql server 2005 the message was sending very well. After installing new instance of sql server 2005 the problem is arising.
Anybody can tell me that what I can do so that i can send mail using the SMTP databasemail account."
I have attempted to report out errors at the end of an ETL process by alerting supporting DBAs of errors using the SSIS "Send Mail Task". Task completes along with the sequenced packages, but does not mail anything out. No logic at this time for trigger, just success from the previous task triggering the task to send mail. I also get no errors in the output, and I get no output indicating the send mail task fired, but it does go "green". Do I have to enable database mail and have privileges?
Component Configuration:
SMTP Connection Manager - SMTP Server: arsocex02
Send Mail Editor -
From: messerj@arsocdev.bdev.lab.mil To: sanderss@arsocdev.bdev.lab.mil MessageSourceType: Direct Input Expression: MessageSource = "Package>>> " + @[System:ackageName] +" was executed at>>> " + (DT_WSTR, 40) @[System:tartTime] + " by user>>> " + @[System::UserName] + " on Machine>>> " + @[System::MachineName] + " Errors reported to ERRORS_COURSE_CLASS_STATUS_T: " + (DT_WSTR, 50) @[User::ErrorCourseClassStatus]
Does anyone have any step by step instructions for how to send smtp mail from SQL? I guess I can use xp_cmdshell to run a vb script or something but I have no clue besides that as to what's involved.
Has anyone ever set up sql mail through smtp. I am trying to automate my server and not having to much success as i cannot use exchange for company reasons. I understand that i am able to set this up through outlook and not outlook express. this is what i have tried to do: 1. Remove any MAPI application (Full Outlook or Microsoft Messaging from control panel). It is important that there are no mapi profiles on the server. 2. Logon to the SQL server using the SQLService account 3. Check that Outlook Express is the default Mail client (done from IE/tools/Internet Options/Programs) 4. Check that there is a mail account configured, pointing to an SMTP server, say aklexch1 (just put bogus stuff in for the POP server) 5. test that you can send a message (ignoring the receive errors) from Outlook Express to your @advantagegroup.co.nz address
Only after step 5 is working should you start testing from SQL
6. In SQL Mail config you will not see any profiles in the list but just type 'Default' 7. Create an SQL Operator with an @advantagegroup.co.nz address and click the test button
I am using a unix terminal via sendmail (which i assume is compliant), I have set up mail client in outlook express called SQLService. My main issue is that no mapi profile can be located on the server and sql server agent is recieving login failed attempts when I a attempt to start it! any ideas
------------ Damien Harris at 1/25/01 7:29:49 PM
Can anyone adivise me with setting up mail in SQL 7. Unfortunatly I am unable to use the usual mail client for security reasons, thus I am attempting to use a mail account through express specifying a smtp address. I keep recieving Mapi and logon errors when starting mail and service manager. Can anyone help! thanks
Has anyone got deatils on how to go about setting up sql through an smtp client. I am unable to configure the automation service through outlook express as I understand that it is not supported. I am using a unix terminal via sendmail (which i assume is compliant), I have set up mail client in outlook express called SQLService (service account) and an exchange account. My main issue is that no mapi profile can be located in SQL mail and sql server agent is recieving login failed attempts when I attempt to start it! Can anyone adivise me with setting up mail in SQL 7
I keep recieving Mapi and logon errors when starting mail and service manager. I have also tried using a internet mail account which has not worked either. I have been told that sql mail should have a default mail client that I have specified as the SQL service account. Any feedback or advise in this area would be extremley helpful as I am stumped at the moment.
Hello,Does anyone know how I can set SQL Server up so that after it hascompleted a backup sucessfully it will send the completion report toan e-mail address via SMTP.Unfortunatly we cannot install MS OUTLOOK Express or similar.Is this possible?Many thanks in advance,Allan Martin
I'm trying to make my SEND MAIL TASK in SSIS dynamic, by retrieving SMTP Server name (amongst other email message information) from a table.
I've got an SP that is getting the information into package variable's, and when I don't try and have a dynamic server name (i.e. I use a specified SMTP server in my SMPT Server connection), then the email get sent off.
I'm trying to use an expression to build alter the send mail to use the server name I have in a user variable.
I've tried using the expression for the property: SmtpConnection set to: RTRIM( @[User::MailServer])
I also tried without the RTRIM - I only added it because the error messages seem to include a full 'string' length, and there doesn't seem to be a 'varchar' data type for SSIS variables.
so: a> Is SMTPConnection the property I need to be setting? None of the others seem correct b> If SMTPConnection IS the property I need, does the value give the SMTP Server Name, or just the Name of the connection from the Connection Manager's?
Thanks
Part-Answer to: b> The SMPTConnection property sets the name of the CONNECTION to be used. That Connection needs to set the name of the server. So n ow, the question becomes, how do I configure that from SQL (I know how to use package configurations from XML files).
Dear all, I have switched off the firewall settings on my system and as suggested im entering the minimal information and data to send the mail. but still the Mail Task is failing.. plz suggest.
Hopefully someone out there will have an idea as this is driving me nuts.
I've setup a task to email on success/failure and keep receiving the following message when executed:
Progress: The SendMail task is initiated. - 0 percent complete [Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.". Progress: The SendMail task is completed. - 100 percent complete Task Send Mail Task failed
When I configure Outlook Express on the same machine with the same settings it works.
On the SMTP Connection Manager I have left the default name, tested with both an IP address and Server Name, and no authentication or SSL.
On the Send Mail Task, it uses the above connection. The To: , From: , Subject fields are populated. Message SourceType is DirectInput, MessageSource is Test, Priority is Normal and no attachments or expressions etc.
Nothing useful is logged in the Event Viewer even with full logging turned on.
I'm having trouble in configuring Yahoo's SMTP for Database Mail. Here is my current settings:
Email Address: xxx@yahoo.com Server Name: smtp.mail.yahoo.com Port Number: 465 This server requires a secure connection (SSL) - check Basic Authentication Username: xxx@yahoo.com Password: xxx
When I tried sending a test email, it didn't work. But when I changed my SMTP to use Gmail, it worked!
I keep getting a generic "Error Sending Mail" error. For testing purposes I am just trying to send using my own email account. What goes in the SMTP Server box in the connection manager? I have tried:
A - the exchange server address (SOMETHING.us.company.com) B - The SMTP properties I see when I look at the properties of my email address: (my.name@abcd.efgh.company.com) C - Just the end portion of the SMTP properties: (abcd.efgh.company.com) D - My email address (my.name@company.com)
I don't know what to enter, or what is giving me such a generic error message.
I know you can specify additional recipients in the To column by sepperating them with a semicolon. But whats the easiest way to send to several users, when the email address must be retrieved from a table with a query like this:
select email from problem_subscribers
where project = 'project1'
and statusmail = 'OnError'
So when the eventhandler gets an OnError i want the mail task to be sent to each problemsubscriber.
Hi all,At this moment I'm trying to get database mail working. According tosome people it should be easy. Well...that is not the case for me.I'm having the following error:The mail could not be sent to the recipients because of the mail serverfailure. (Sending Mail using Account 2 (2006-11-24T08:48:15). ExceptionMessage: Cannot send mails to mail server. (Command not implemented.The server response was: Command not Supported).)SQL Server 2005 is installed on a separate server and the SMTP Serveris Lotus Notes. connecting with port 25.Start and stopping the SQL Server and SQL Server agent i tried already.i tried sysmail_stop_sp and sysmail_start_sp.Sometimes when starting or stopping the Mail with the followingcommands :exec sysmail_stop_spGOexec sysmail_start_spGOI will get the following error:Msg 233, Level 20, State 0, Line 0A transport-level error has occurred when sending the request to theserver. (provider: Shared Memory Provider, error: 0 - No process is onthe other end of the pipe.)So any help would be appreciated.Hennie
NOT ABLE TO SEND TEST MAIL FROM DB MAIL...The mail could not be sent to the recipients because of the mail server failure. . Exception Message: Cannot send mails to mail server. (Failure sending mail.).Exception Message: Cannot send mails to mail server. (Failure sending mail.).
NOT ABLE TO SEND TEST MAIL FROM DB MAIL///The mail could not be sent to the recipients because of the mail server failure. . Exception Message: Cannot send mails to mail server. (Failure sending mail.).Exception Message: Cannot send mails to mail server. (Failure sending mail.).
Hi, I have RS 2000 running on windows 2003 server. I want user to subscribe to reports and receive reports via email. Initially SMTP was not installed for IIS 6.0, so I installed it and the right way (I had done it on different machine before and was succefull in that) but on this particular machines ...I don't see "Default SMTP Virtual Server" node when I open IIS manager. This is the third day I am working on this issue ..please help me out guys, prashant
Is there anyway to send excel file from ssis using send mail task without saving the excel file locally. I need to automate the process which involves loading the excel file from the database and send it to some people.
Hello dear i am using windows 2003 server where i have installed smtp server now i want to configure with remote stmp so i can send an email to any domain.
xp_sendmail has died on our SQL Server, I get error "xp_sendmail:failed with mail error 0x80004005" if I try using it.I believe that the reason that this has happened is because the SQLServer service account is unable to send mail, as follows:If I log on to Outlook Web Access as the SQL Server service account(SVC_SqlServer) I am able to receive mail. However, any mail sent fromthis account simply dissapears.It appears in the Sent items folder (in OWA for the SVC_SqlServeraccount) but the recipient (me, in this case) never receives it!Does anyone know why this account is unable to send mail?Help!eddiec :-)
