Change License Mode On SQL 2k Cluster
Jul 23, 2005I need to change the SQL server license mode on an installed SQL server
2000 cluster from processor license to per seat.
Does anyonw know?
ADVERTISEMENT
How To Change A License Mode?
Sep 25, 2000Hi,
How I can change a license mode?
I choose PER SERVER, but I need PER SEAT.
Thank you at advance.
Mira.
License Mode
Dec 13, 2000Hi all,
I want to know how I can do to change my SQL server licence mode (from per-ser to per-seat) without reinstall SQL Server.
Thanks in advance.
License Mode Correct ?
May 17, 2001Is the following right ...
ASP applications accessing VB dll
, where the VB dll, IIS & SQLServer 2000 are at the same the machine
-> Processor License Mode required for SQLServer 2000 ?!?
(Sorry if this has been posted more than once.)
Thanks,
Ben
Mode Of License Do SQL Server Is In?
Oct 11, 2007Dear All,
How would I know what mode of License do SQL Server 2000 and 2005 is running.
Thanks,
How To Modify License Mode In Sql 2005
Nov 22, 2007Hello All,
I want to change from cal user license to processor license in sql 2005. How do I do this? Do I need to reinstall sql? Assuming I need to reinstall, will my settings be gone?
Sorry, I'm new to sql. Thank you!
How ToChanging License Mode From Per Server To Per Seat??
Jun 14, 2000Hi,
I have a SQL server installed in per server license mode... I am getting some error saying
"THE MAXIMUM SIMULTANEIOUS USER COUNT OF 1 LICENSE FOR THIS STANDARD EDITION SERVER HAS BEEN EXCEEDED. ADDITIONAL LICENSE SHOULD BE OBTAINED AND INSTALLED OR YOU SHOULD UPGRADE TO A FULL VERSION""
can someone tell me how to go from per server to per seat....
Thanks
License Change?
Jan 17, 2001Hi all,
There is a guy in my company install a sql server himself, but he picked the per seat license rather then the per server (we got the per server license), is there a way to change it without re-install the whole sql server? or need to reinstall from start?
Thanks,
Westley
Recovery :: IP Change For Cluster / Nodes And Windows Cluster?
Jul 15, 2015We are planning to change all IPs of PRODUCTION Failover Cluster Setup. In my cluster setup ... we have 2 Physical Nodes with windows-2008, Roles are MSDTC and SQL-2008R2.
IP change for:
1. Both Nodes(Physical)
2. MSDTC
3. SQL Server
4. windows Cluster
So Almost... All IPs are going to change.
Im DBA here, I need to take care of SQL cluster and MSDTC. But I haven't performed this activity before.So I'm worrying about Impacts and consequences of this change. steps how should I perform this activity.
How To Change License Info
Nov 15, 1999When I installed sql, I mistakenly made it so that only 1 connection is allowed at one time. How can I change this info. to make it so that more than 1 connection are allowed without re-install sql again? Thanks
View 1 Replies View RelatedScript To Change Cluster Index To Non Cluster
May 20, 2003Hi all,
We have many tables which have cluster index on column with datatype 'Char(200)'.
Does anyone have script to change cluster index to noncluster for all user tables which have clustered index on a column with 'char(200)' datatype.
Thanks,
Deepak
How Do You Change The Number Per Seating License After Installation?
Oct 28, 2004I have more CAL for the SQL Server 2000 software. I was wondering, how or where do I about to change the number per seating for the software? thanks in advance.
View 2 Replies View RelatedSql Server 2005 License Change Without Re-install?
Jun 27, 2007The wrong Cd set was used to install Sql Server 2005 enterprise edition.
I need to ensure the license for Sql server is the license from the other CD.
is there a way to switch the license without un-installing SQL Server?
To Change The Authentication Mode
Aug 26, 2007Dear All..
I am using sql server 2005 , the problem with me is that I want to change my Authentication type.... now It has setted as 'Windows Authentication and Sql Server Authentication', Here I wants to change to 'Sql Server Authentication' Only... Can I do it without re-installing my sql server... I did try by going Securiy Tab in properties of my server... there are two options 1)Windows Authentication 2)Sql Server and windows Authentication mode, I want to change it to only Sql server Authentication....meaning to say - shld ask for authentication whenever log on to server
hope any one can help me
Thanks in Advance
Akbar
How To Change The Licensing Mode??
Dec 22, 1998I choose "PERSERVER" as licensing mode during the installation of the SQL Server by running the Setup. Now I want to change it to "PERSEAT" but I don't know how.
View 2 Replies View RelatedHow Do I Change The Authentication Mode?
Nov 14, 2007Change the Authentication Mode of the SQL server from "Windows Authentication Mode (Windows Authentication)"
to "Mixed Mode (Windows Authentication and SQL Server Authentication)".
How do I do this?
Change Recovery Mode
Feb 19, 2008We have 300+ databases on one sinlge server (SQL 2005). If I need to change recovery mode from full to simple for all of them, is there any way to do so? Please advice.
View 3 Replies View RelatedDatabase Compatibility Mode - When To Change???
Sep 14, 2004I have been migrating Databases from a SQL Server 7.0 Instance to a 2000 Instance. Basically the method I use is as follows:
a)Create a new Database on the Destination Server (same name as the Source) When I create the new Database on my destination server, the compatibility mode is '80' and the source is always '70'
b) do a 'revlogin' on the Source Server and use the output from that query to recreate the logins on the destination server
c) make sure that the default DB for the newly creates logins are correct and change them if necessary
d) Backup the DB on the Source Server and Restore it to the Destination Server.
e) Check login permissions and fix any orphaned users - usually I don't find any that need to be fixed, but I always check.
I've read BOL on Changing the compatibility mode on the Database... but I'm still unsure when I would have to do this and why???????????????? SHOULD I be changing the compatiblity mode from 80 to 70 when migrating Databases from 7.0 to 2000???? Any advice on moving DBs in this manner would be appreciated.
Change The Authentication Mode Of The SQL Server
Dec 12, 2006I installed SQL Server 2005 using Windows Authentication Mode (Windows Authentication)"
How can I change the Authentication Mode of the SQL server from "Windows Authentication Mode (Windows Authentication)"
to "Mixed Mode (Windows Authentication and SQL Server Authentication)"?
SQL Server 2005 Workgroup Edition Licensing (How To Install Without A License, Then Require License On First Run)
Oct 13, 2006I have a VERY Legitmate use to install sql 4 workgroups on a pc without licensing it. I am making a disk image for MANY pcs to be imaged and load licensing after the imaging is completed.
I have been able to do this with Windows XP Professional, MS Office 2003 and a couple non-Ms programs. The information for MS software even came from their KB, so I know what I am doing is legit. I just can't find any information on doing this for my sql app.
Any suggestions??
Respectfully,
Frustrated
"Frustrated"
SQL Server Express Authentication Mode Change
Jul 6, 2005Does anyone know how to change the SQL Express authentication mode from Windows Authentication to Mixed Mode after it's already been installed?
View 4 Replies View RelatedHow To Change The Mode Of Recovering For Full Simple
Jan 25, 2008
I have a database that is set to Full recovery model, I would like to switch to simple. I must perform some procedure before doing so?
The size of the transaction log is very high in this database, I would like to decrease it before moving to simple, have a problem doing that?
Thank You,
Ralph Haddad
Mirror Operating Mode Change Problem
Jun 7, 2006I am unable to change the mirror operating mode on a test database mirror I have set up. I installed (from MSDN) the RTM SQL 2005 Std Edition and applied SP1, then set up a mirror, which works fine but only on High Safety mode. I want to use High Performance mode, but the operation mode radio buttons are greyed out for me in the mirror properties page. Also, I tried running:
alter database TestDB set safety off
and recieve the error:
Msg 1473, Level 16, State 6, Line 1
This SQL Server edition does not allow changing the safety level. ALTER DATABASE command failed.
Are the various mirror modes not supported on the Std edition or am I overlooking something?
Thanks.
From the db engine server properties:
Product: Microsoft SQL Server Standard Edition
OS: Microsoft Windows NT 5.2 (3790)
Platform: NT INTEL X86
Version: 9.00.2047.00
Analysis :: SSAS 2014 - How To Change Mode To Tabular
Nov 13, 2015I have a new 2014 SSAS installation. During VS2013 Tabular Project create I get an error Cannot connect, Reason The workspace database on server ***** is not running in tabular mode.I've changed msmdsrv.ini - DeploymentMode>2...The server wont start.
View 3 Replies View RelatedHow Can I Change Security Mode Of SQL Server Express 2005
Sep 11, 2006Hello,
I have created one application in visual studio 2005 and also created setup project of that application. now i want to install SQL Server Express edition with my application. so i have checked SQL Server Express 2005 in Setup Project Properities(Prerequisites...). now i want to change SQL Secirty Mode during setup. and i don't know how can we do this?
Any idia?
SQL Server 2008 :: Database In Single-user Mode / How To Change It Programmatically
Mar 10, 2015Recently we had multiple production failures because one database was in single-user mode. I am trying to recreate this scenario to write a script that will kick out that connection that was holding database in single-user.In SSMS window 1 I run the following code:
use master
go
alter database test
set single_user
with rollback immediate
[code]....
Yes, it shows one record, but the database name is master, not test. And indeed, I run it from the context of master. Also tried sp_who, sp_who2, sys.dm_exec_requests - nothing works. For dm_exec_requests it shows nothing because it does not run at the current moment.Any other solutions to catch this SPID with a script?
Cluster IP Address Change And Delay
May 27, 2007Hi all,I have recently changed IP addresses on my MS SQL cluster (the new IPaddresses belongs to a different network). Both physical node's IPaddresses and resource's IP addresses have been changed.Everything seems to work fine. The cluster is up and respondingnormally. The resources failover to another node when needed correctly.However, I have noticed that the time it takes for the resource tofailover to another node is much longer than in the past (before IPaddresses change). I have noticed that "Network Name" is the resourcetype that causes the delay. Could you please advise if there issomething that I overlooked and needs to be changed.updated as well, sothat groups fail over faster?Thanks,Aleu
View 5 Replies View RelatedChange Server Name In SQL2005 Cluster
Jun 26, 2007Once the SQL2005 cluster is installed can I change the "physical" server name of the 2 server nodes in the cluster. I do not want to change the virtual server name but the "physical" Windows server name....
Steve Dunn
sdunn@esiindy.com
Recovery :: Change Authentication Mode From Windows To Mixed / 4-node Participating In AlwaysOn
May 13, 2015I need to change the authentication mode from 'windows' to mixed, its a 4-node participating in always-on... Will this brake/impact alwayson in any way? I know I have to restart the sql instance.
View 3 Replies View RelatedSQL 2012 :: How To Change The Service Passwords On Cluster
May 15, 2014How to change the sql service passwords on a SQL 2012 cluster.
View 3 Replies View RelatedSQL 2012 :: How To Change Backup Replica In AlwaysOn Cluster
May 6, 2014How can we change the backup replica in Always on Cluster. I am not able to take backup because of this.
View 7 Replies View RelatedSQL 2012 :: Cluster Domain / IP / Hostname / Network Name Change
Sep 19, 2014We have 2 node sql 2012 cluster and we have a scenario where domain,IPs,Hostanmes and SQL network name are changing.
1> Can SQL cluster role be brought online by changing the sql network name and its IP once windows team reconfigure the OS cluster or there will be any challenges.
2>should I uninstall sql cluster on both nodes then windows will destroy OS cluster and they then they need to change IP,hostname and domain and then fresh installation of sql cluster
SQL Server 2008 :: Change IP Address Of Failover Cluster Instances
Mar 9, 2011IF you need to change the IP Address of a SQL Server Failover Cluster instance, here is the steps:
1. Open up Failover Cluster manager.
2. Expand the MS Cluster Instance that your SQL Cluster instance resides on.
3. Expand Services and applications.
4. Select the SQL Server Service.
5. In the main window pane (Middle Screen), you should see your SQL Server Cluster name, expand the plus to the left of it.
6. Under your SQL Server Cluster name, you should now see an 'IP address' section, right click on it and go to properties.
7. In the properties pane, you can change your IP address by entering a static IP.....or assigning a DHCP enabled IP.