Changing Database Name In DTS Transformation
Nov 26, 1999
I have come across a problem having developed my DTS packages on one database (dev server) which has a different name to the database on the Test/Live servers. I had planned for this in that I was changing the server and database source before executing the package. When I tested this it turns out that the file import transformation that references the table to import into specifies the whole database.owner.table name and the database portion has not changed and therefore the package fails. I've dumped the package using the dts utility to view the vb script and have found the property DestinationObjectName (part of the custom task object for the relevant step...) which looks like the one to change but is this really what has to be done?
regards
Ken
View 2 Replies
ADVERTISEMENT
Jun 7, 2006
Hi,
I have a problem with the SCD-transformation in SSIS. I have a variable that holds the batchid for the current batch and I want to add this variable to the datapipline in the Data Flow Task.
This is done by using a Derived Column, so far so good. The problem occurs in the Slowly Changing Dimension transformation where I do som evaluations of changed columns BUT I don´t want to do any evaluation of the batchid-variable because then all historical batchid will be updated.
I only want to update the batchid for row that have changed in the current batch.
Is it possible to do this in any way without adding the Derived Column after the SCD transformation??
Thank for any help!!
Patrick
View 3 Replies
View Related
Jun 6, 2007
I have a SSIS package which contains a number of slowly changing dimension transformations. While the majority work I have one which gives me the following error 'Error: The variable "System::LocaleID" is already on the read list. A variable may only be added once to either the read lock list or the write lock list. '. This error only occurs if the destination table holds data. If I truncate the table and reload the data then the package complete successful. The only difference I can see between this dimension transformation and the other dimension transforms is that the one in question has 2 business keys while the rest have 1.
Can anyone shed light on this?
Thanks
View 3 Replies
View Related
Apr 1, 2008
Hi,
We're currently running into an interesting situation where it seems that a Slowly Changing Dimension Transformation believes that 'Å“' (ASCII #156) is the same as 'oe' (ASCII #111 + ASCII #101).
To make a long story short, one of our integration package updates some Product table based on the result of a Slowly Changing Dimension Transformation with three outputs: Unchanged, New and Changing Attribute Updates. Among the columns leading to a row redirection in the Changing Attribute Updates output is some French Description column defined in SQL Server as a varchar(60) (external column) and in the SSIS package as a (DT_STR, 60, 1252) (input column). Now, when the SCD Transformation compares the word 'coeur' (external column) with the word 'cœur' (input column) in this French Description column for a given row, the row is redirected to the Unchanged output (no other columns changed...) instead of to the Changing Attribute Updates output.
Is my example clear enough? Any idea what could explain this unfortunate result? Note that from a strict French point of view, 'Å“' instead of 'oe' is a typographical fantasy and that in my example above, the word 'coeur' ("heart") is really spelled 'c' + 'o' + 'e' + 'u' + 'r', but we're talking programmed comparison here, not linguistic, right?
Any comment will be appreciated.
Thanks,
AL
View 1 Replies
View Related
May 16, 2006
First let me say, I really can't believe this chain of events myself--and they are happening to me.
I am upgrading several DTS packages to SSIS on what will be my new production server. These packages create tables, export them to a flat file, and ftp them off to other locations.
What is happening (on the SSIS side) is that the OLE DB Source is reordering some of the columns on its own (moving them to the end of the table/file. Then when my pickup/load routines run, the data is out of place and they fail.
Can anyone please explain what is happening here with the mapping. I have evaluated the table and the columns are in the order that I expect. When I preview the source table in the OLE DB Source Editor the columns are in the correct order/alignment, but when them in the OLE DB Source Editor --Columns section within BIDS the order is changed arbitrarily.
I have been somewhat successful (2 out of 3) in being able to re-map the data, but this last table just doesn't want to change.
Thanks in advance for any help and/or information you can provide
View 13 Replies
View Related
Jun 5, 2006
Hi,
If you have two synchronous transformation components and the input of the second is connected to the output of the first, does the first transformation process (loop through) all rows in the buffer before outputting these rows to the second transformation? Or does the first transformation output each individual row to the second transormation as soon as it has finished processing it?
Thanks in advance,
Lawrie.
View 5 Replies
View Related
Apr 22, 2015
tell me the difference between Audit transformation and rowcount transformation.
Because audit and rowcount transformation will provide the environment variables.
Only difference i am finding is rowcount returns the count of rows its updating .
Apart from these is there any other difference?
Tell me the scenario where i need to use the audit transformation.
View 3 Replies
View Related
Sep 25, 2006
Hi,
I am using SCD Transformation my source & destination is oracle database .while doing insert or update I am getting the following error.
Does SCD support Oracle ?
[Slowly Changing Dimension [58]] Error: An OLE DB error has occurred. Error code: 0x80040E5D. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80040E5D Description: "Parameter name is unrecognized.".
please anyone help on this. Parameter name is unrecognized means What exactly we can do.
Thanks & Regards,
M.Jeyakumar
View 1 Replies
View Related
Feb 6, 2007
Hi,
My scenario:
I have 4 different flat files types each having different no. of column, order of columns etc. I want to upload all the 4 types into the same destination table in the SQL database. Before uploading I need to apply transformation to each column in the flat files. The transformations could be like
1) Multipying the source column by 100
2) Put an if condition for 2 source columns and then select one column to be copied into the destination.
I have the flat files schema with me and also all the transformations that are required.
Question:
Can SSIS provide me with a component that can read the flat file schema and the transformations from the database and apply them to the source data and then upload it to the constant destination table? Can derived column transformation be provided with the input columns list and the transformation to be done on each dynamically?
Why I want this way?
In future there can be an addition of extra flat file formats and we want to keep the changes to the SSIS packages to he mininum. Just entereing the addiional schema and transformation details in the database should run the package on the new flat file successfully.
Thanks for your time.
Regards,
$wapnil
View 15 Replies
View Related
Jan 26, 2007
Hi
I am trying to change the host database (MSDB) of Database Mail to some new database (say NewDB) and
unable to make DatabaseMail90.exe point to this new database (NewDB).
Is it possible to do this?
Thanks
Uddemarri
View 4 Replies
View Related
Nov 19, 2002
hi, I have created a database in sql server 2000. I need to duplicate the database under different name, how can I do that?
Also, can I rename a database name?
thanks
Ali
View 3 Replies
View Related
Mar 15, 2001
Hi all,
I have an application that executes the USE command as it's first order of businees with the database. According to the SQL Books On-line, all USE commands will result in the following message being generated:
Error 5701
Severity Level 10
Message Text:
Changed database context to '%.*ls'.
However, my application has never reported this message, execept for at one customer site. I cannot figure out why at this one particular site, the customer is seeing this message each time the application starts. Once they ok the message, everything else with the application is fine, but it is a nuisance for them (gotta love customers!).
Any ideas why this would start happening?
View 1 Replies
View Related
Apr 27, 2007
Hi.
I thought I had this solved but after running aspnet_regiis again
I am having the same problem.
I can't log onto my sql server because the default DB is master.
The following command using sqlcmd gives me the master db:
Code:
SELECT *
FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_TYPE = 'BASE TABLE'
GO
So, to try to fix this i ran:
Code:
EXEC sp_defaultdb 'sa', 'my_default_db'
GO
and no luck. I went over to the DB server and checked
the permissions under SERVER/SQLEXPRESS > SECURITY > LOGINS. All except NTAuthority and Administrators have
my intended DB as the default (including ASPNET).
This is frustrating because I know I have figured it out
before but I can't remember what I did. Help appreciated.
Thanks.
View 1 Replies
View Related
Jan 11, 2008
Hi there,
We currently install some of client's databases on SQL Server 2000 with the collation set to Latin1_General_BIN but we have one client that was installed and now running on SQL_Latin1_General_CP1_CI_AS and I was wondering if we can change the collation on the database to Latin1_General_BIN?
Would this have any adverse affects on the DB or the data within it? Our strings are nvarchar.
Thanks for your help
View 2 Replies
View Related
May 12, 2008
Hi,
I currently have a web application connected to a MSSQL 2005 database. We are signing some new clients to our web application who will be using a different language set. So were going have to change the database to Unicode? Anyone have any experience with this, or what are the steps implications involved?
Thanks.
d
View 1 Replies
View Related
Dec 11, 2006
that sounds obvious but I'm stuck...
I have an ASP.net application which someone else started and I continue.
on the SQL server there was a user X which was used to access the database from the ASP website.
I accidently changed the password in the SQL server and now I cant restore the prior settings
(trying to reset password to blank or embedding the username and password in the connection string didnt work).
it stops on "connection.open" with - "SQLException Login failed for user 'X'"
any ideas why that happens and how I can fix it?
thanks
View 1 Replies
View Related
Nov 14, 2007
Hey guys,
I uploaded my website from VWD Express to ipower. My database did not work, which I have learned upon some research should have not been a shock to me, but most definetely was. When I contacted tech support they told my that my web.config files were pointing to my local paths. That I should change them and I should be fine. Elsewhere, in the knowledge base I found the strConnect that I am under the impression I need to use.
strConnect = "Provider=SQLOLEDB; Server=SQL-A1; UID=account_username; PWD=account_password; Database=user_db_name" oSQLServer.Connect strServer,strLogin,strPwd
The problem is, I'm a complete newbie, learning as I go and I can't find anything on where or how I insert this into my web.config to correct my paths. IPower will not help with coding. I know my current connection string is in web.config in the appsettings, that's about as far as my knowledge goes.
So, could anyone show me how I go about putting this into my web.config? Examples are very helpful :]
On a side note, I've been reading that this is a common problem among newbies like myself. So, is changing these files actually going to work, or am I wasting my time? Also, before I get knee-deep into it, is the database-publishing kit put out by MS the way to go here?
Thanks for any and all replies, you guys are always awesome.
View 6 Replies
View Related
Apr 7, 2008
My sql database is in suspect mode, please help me with step by step how can i change the suspect status to normal status, please dont provid eme the links of other site and help me in your own language
iam getting following error:
TITLE: Microsoft SQL Server Management Studio------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------ADDITIONAL INFORMATION:
Database 'msdb' cannot be opened. It has been marked SUSPECT by recovery. See the SQL Server errorlog for more information. (Microsoft SQL Server, Error: 926)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=926&LinkId=20476
------------------------------BUTTONS:
OK------------------------------Thanks in advance
View 3 Replies
View Related
Nov 2, 2003
Hi
I want to change collation_name of my SqlServer Database by running a script. But I don't know how.
Please help me.
Thanks
View 1 Replies
View Related
Apr 28, 2006
I am having a hard time finding materials on this subject. I am guessing I am using the wrong keywords to search. Basically, I want to be able to modify database tables through a web form. They can add columns and delete columns through the form. I would just want to default the type of column and the length. I am sure it has been done, I was just wondering if anyone had some resources they could throw my way. I would appreciate it. Thanks.
View 1 Replies
View Related
Oct 16, 2006
If you enter "Create Database test", the database files (mdf file & log file) are created, by default, in:-
C:Program FilesMicrosoft SQL ServerMSSQLData
I want to change that to:-
D:Database Files
I sucessfully moved the model database to this location (using the instructions in BOL) assuming that all new databases would now get created in the same location, but they don't. They still get created in:
C:Program FilesMicrosoft SQL ServerMSSQLData
So how do I change the default?
(It's not satisfactory to have to move each database after it's created)
Thanks, Andy Abel
View 3 Replies
View Related
Mar 6, 2012
I currently have a server with the collation set to SQL_Latin1_General_CP1_CI_AS.
However, some of the databases within the server are set to Latin1_General_BIN, probably because they were restored from another server some time ago. Also, even within the databases that have Latin1_General_BIN, some of the columns are set to SQL_Latin1_General_CP1_CI_AS, very confusing to say the least.
What i would like to do is change the database collation settings for these databases to match the server setting. I would also like to change all of the tables within these databases to have the columns also set to the server collation settings.
I'm looking for the steps that i would need to take to make sure i don't mess anything up as these databases have there own sets of views and sp's that run each day.
View 3 Replies
View Related
May 3, 2004
Hi there
I am using SQL server 2000 and
I want to Change Server Collations from SQL_Latin1_General_CP850_BIN to
SQL_Latin1_General_CP1_CS_AS.
Can anybody help me in this regard.
Rgds
Wilson
View 5 Replies
View Related
Jul 15, 2015
I had a query that executed in about 20 seconds pulling from database 1. The only changes I made were to make it pull from database 2. It is currently running and has been for over an hour and a half.
View 2 Replies
View Related
Jul 20, 2005
I need to create a stored procedure in the master database that canaccess info to dynamically create a view in another database. Itdoesn't seem like it should be very hard, but I can't get it to work.Here's an example of what I want to do.CREATE PROCEDURE create_view @dbname sysnameASBEGINDECLARE @query varchar(1000)SELECT @query = 'use ' + @dbname + ' go CREATE VIEW ........'EXEC(@query)ENDIn this case, I get an error with the word "go". Without it, I get a"CREATE VIEW must be the first statement in a batch" error. I tried asemicolon in place of "GO" but that didn't help either.Thanks
View 4 Replies
View Related
Aug 27, 2015
I need to change the table codes to in memory optimized but every time I try to change I got an error message like you need to change database to memory optimize.
So, I try to change it  using this code:
ALTER DATABASE Coralreef_ ADD FILEGROUP Coralreef__mod CONTAINS MEMORY_ OPTIMIZED_ DATA.
When I used this  I got an another error:
Msg 10797, Level 15, State 2, Line 1..Only one MEMORY_OPTIMIZED_DATA filegroup is allowed per database.
So, How can I change database to in memory optimized database.
View 5 Replies
View Related
May 2, 2006
Hi,
I am building a data warehouse for a customer who has systems located in two different countries.
I need to import that data from four seperate databases, which all share the same structure.
To do this i have created 20 packages to import that data from the source database. What i would like to do, is at run time set which database the SSIS package should get its data from.
In sql 2k this was easy with a global variable that was set, then use a dynamic properties task to set the data source.
How can i achieve the same result in SSIS? the data source is an ODBC connection, with the four ODBC connections having similar names, eg ABC_NZ, ABC_AU
Thanks in Advance!
Truby
View 6 Replies
View Related
Nov 9, 2007
I am working on an application that was initially set to connect to a SQL database.
The application is for a Pocket PC and now I have converted the original SQL database to a SQL Mobile database.
Does anyone know if there is a way to change the the code to be able to access the SQL mobile database without having to go through all the code and manually make the changes?
Thanks
View 1 Replies
View Related
Dec 17, 2006
Hello, We are re-writing our site in asp.net using sql server. Most of the site uses asp classic and it was to an access database. During the conversion we have everything working correct to SQL Server except for the asp.net connection string. There is an important part of the application using asp.net which works fine with our connection string to the access database. To recap our problem is the connection string from asp.net to sql server. This code works fine for the asp.net to access in the web.cnfg file </microsoft.web> <connectionStrings> <add name="SalesConnectionString" connectionString="Provider=Microsoft.Jet.OLEDB.4.0;Data Source=E:inetpubvhosts hemarketingvp.comsubdomainsvphttpdocsfpdbsalesMain.mdb" providerName="System.Data.OleDb"/> <add name="ODBCSalesConnectionString" connectionString="DRIVER={Microsoft Access Driver (*.mdb)};DBQ=URL=E:inetpubvhosts hemarketingvp.comsubdomainsvphttpdocsfpdbsalesMain.mdb"/> <add name="RawConnectionString" connectionString="Provider=Microsoft.Jet.OLEDB.4.0;Data Source=E:inetpubvhosts hemarketingvp.comsubdomainsvphttpdocsfpdbsalesMain.mdb" providerName="System.Data.OleDb"/> <add name="ConnectionString" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|inventoryStatus.mdf;Integrated Security=True;Connect Timeout=30;User Instance=True" providerName="System.Data.SqlClient"/> </connectionStrings> <system.web> The code in the global.asa which works fine for classic asp to sql server also works fine and is as follows '--Project Data Connection Application("sales_ConnectionString") = "Driver={SQL Native Client};Server=DMSERVER01;Database=SQLsalesMain;UID=nTrack;PWD=nTrack2k3" Application("sales_ConnectionTimeout") = 15 Application("sales_CommandTimeout") = 30 Application("sales_CursorLocation") = 3 Application("sales_RuntimeUserName") = "" Application("sales_RuntimePassword") = "" Our programmer who set this up is out for a couple of weeks and I would appreciate any help in the correct connection string from asp.net to the sql server database in the web.cnfg file Thanks
View 5 Replies
View Related
Jan 15, 2005
Hi,
I have an ASP.NET application that uses VARCHAR extensively in the tables and, more importantly, stored procedures (a couple hundred of them).
This app needs to start accepting foreign language in some areas, so I was wondering if there was some way to go through the tables and, more importantly, the stored procedures and change all "VARCHAR" references to "NVARCHAR" ?
Are the stored procedures stored as a text file somewhere on the server? If so I could use some sort of "replace" software utility to go through and change all VARCHAR to NVARCHAR
thanks!
-Bret
View 2 Replies
View Related
Aug 7, 2002
I have installed my modell database onto c:mssql7data...
How do I now change the properties of this so that when someone creates a database, the path it will get created to is set to d:
I thought that I could just move model, but it seems that this isn't possible.
Any advice?
thanks
derek
View 1 Replies
View Related
Jul 10, 2007
changing master database location in sql server 2000
HELLO PLEASE HELP ME I AM TRYING TO CHANGE THE LOCATION OF MASTER DATABASE ( MDF AND LDF ) AND ERRORLOG FILES I HAVE TRIED EDITING STARTUP PARAMETERS IN ENTERPRISE MANAGER I FAILED ,I TRIED IN COMMAND
PROMPT "SQLSERVR.EXE " I SUCCEEDED IN CHANGING THE DATA FILE AND ERROR LOG BUT UNABLE TO CHANGE THE LOG FILE PATH FROM DEFAULT LOCATION C:PROGRAM ............
TO D:DATA
PLEASE GIVE ME THE PROCESS TO CHANGE DATA ,LOG AND ERROR LOG FILES of master database
thanq in advance
View 2 Replies
View Related
Aug 31, 2007
Hi
After install the mdf and log files are stored in the Program Files directory tree.
How do I change the place were they are stored to a path of my own choice, so that new DBs get created there too?
I've looked though the docs, but I can't find this.
Thanks
John
View 1 Replies
View Related
