Changing In Sysaltfiles Doesnt Work
Jun 29, 2007
HI All,I have started sqlserver in single user mode and changed filename in sysaltfiles for tempdb too point to new location. While starting sqlserver in normal it points to the old path and doesnt get updated with the new path.1.)is there any systable still to be altered???2.) i have even tried alter database, doesnt work.3.)The master files have been taken from server1 (where tempdb points to d:data) to server2 ( where i need to point tempdb to point E:mssqldata). i can detach and attach msdb and model successfully, but in the case of tempdb, i cant either alter sysaltfiles or detach and attach tempdb to new path., too tired in trying all the possiblities... Is there any possibility to update tempdb to point to new path???
View 5 Replies
ADVERTISEMENT
Feb 22, 2006
i am new at T-SQL and am trying to delete entries in a column that are not integers. i have the following code. why does it not work.
T-SQL
select invoicenumber from [control register] where convert(int, invoicenumber) like '%'
if @@error > 0
begin
delete from [control register] where invoicenumber = invoicenumber
end
go
gives me the error in Query analyser:
Server: Msg 245, Level 16, State 1, Line 1
Syntax error converting the nvarchar value '10-3-05' to a column of data type int.
@@error is supposed to pick up the error. why is it not.
please could you reply urgently at chris@captivedesign.co.za
thanks in advance
Chris Morton
View 8 Replies
View Related
Jan 26, 2004
can someone tell me why this sql statement doesnt work?
SQL = "SELECT (Count(department_id) as 'totals' FROM nonconformance WHERE department_id = '7'),(Count(department_id) as 'totals2' FROM nonconformance WHERE department_id = '1') FROM nonconformance"
How do I fix it?
Thanks
View 2 Replies
View Related
May 21, 2008
Can someone tell me why this thing in the end return Null?
declare @uz_id uniqueidentifier
set @uz_id=null
set @uz_id=
case @Uz_ID
when null then '00000000-0000-0000-0000-000000000000'
else @Uz_ID
end
select @uz_id
...it should return '00000000-0000-0000-0000-000000000000' in my opintion
P.S. When I say return i mean the value that is shown after 'select @uz_id' is executed:)
View 5 Replies
View Related
Mar 21, 2007
This is an insert statement i'm trying to run. I want it to only insert this recird if the corresponding EMPLOY_REF exists in the EMPLOYEE table. Heres my statement:
INSERT INTO SALHISTY(EMPLOY_REF, SALARY, SAL_REASON, SAL_DATE)
VALUES ('8971','175000.0000','ANNRV','2007-04-01 00:00:00.000')
WHERE '8971' IN (SELECT EMPLOY_REF FROM EMPLOYEE)
This is the error message i'm getting.
Server: Msg 156, Level 15, State 1, Line 3
Incorrect syntax near the keyword 'WHERE'.
Any help would be greatly appreciated. Thanks
View 14 Replies
View Related
Dec 6, 2007
select distinct
a.Patients,
b.Patients,
a.pct,
b.pct
from
(
select count(*) as Patients, [pct of res] as pct
from testing
where [18 week wait] <= 18
group by [pct of res]
) as a right outer join
(select distinct[pct of res] from testing) as c on a.pct=c.[pct of res]and a.pct <> 'null' --is not null
(select count(*) as Patients, [pct of res] as pct
from testing
where [18 week wait] >18
group by [pct of res]
) as a left outer join as b on c.[pct of res]=b.pct
View 6 Replies
View Related
Sep 15, 2006
I have the following in my commandtext but it doesnt seem to replace the LanguageColumnName variable: Dim cmd As New SqlCommand("SELECT '+@LanguageColumnName+' FROM tblSports a INNER JOIN tblUsersAndSports b ON a.SportID=b.SportID " & _ "WHERE b.UserCode=@UserCode", MyConnection) cmd.Parameters.Add(New SqlParameter("@UserCode", UserCode)) cmd.Parameters.Add(New SqlParameter("@LanguageColumnName", LanguageColumnName))I have tried '+@LanguageColumnName+' and also just @LanguageColumnName but this variable isnt replaced for some reason.The value of LanguageColumnName is "de"...the funny thing is that when I just type my command like the following it DOES work..:SELECT de FROM tblSports a INNER JOIN tblUsersAndSports b ON a.SportID=b.SportID " & _ "WHERE b.UserCode=@UserCodeWhat am I doing wrong?
View 1 Replies
View Related
Apr 23, 2008
I have my db in a pocket pc wm5.0, I just want to make a simple query
select * from table
where pk = '1'
but this doesnt work, if you tried any other field else than the primary key
it works... WHY???
would it be a problem with the sdf file? help please!!!
View 3 Replies
View Related
Jul 5, 2007
Hi,
I have an issue. When I am performing a Merge Join using two fields of type
DT_WSTR on both sides of the Join, the Dataviewer after the Join only shows the left side 2 key
fields having values populated but both fields from the right hand side as being NULL. The Dataviewers I put in before the join show both sides of the join fields being populated ( 2 sides x 2 fields ). If I remove one of the fields from the join it shows both fields from the left side and the right side of the join being populated . I am trying to knock out duplicate values from the insert using 'genuine' Nulls from the right hand side so I need both parts of the 'Key'. I have checked the adnvanced tab that ignores Case etc but has had no effect.
I am using the technique from here : http://www.sqlis.com/311.aspx
Is this an SSIS bug ??? It is driving me up the wall.
Help would be much appreciated please.
Thanks
Jon
View 1 Replies
View Related
Jun 18, 2007
hi there,
i've made a report containing a subreport. the subreport is in a table. the table headers should repeat. but if the subreport expands more than one site, the table header doesnt repeat.
okay. i could place the table header in report header, but in report header i cant use fields from a dateset.
thanks for any idea, tobi
View 1 Replies
View Related
Jan 17, 2006
hi, i hope this is the correct forum?i have developed a small asp.net 2.0 web site with vwd using sqlExpress which appears to just bean data file and a log file in my app_data directory. there are two databases, the users one that is created by the login manager and my own that i created to store data. this all works fine on my laptop. i have an xp-pro machine setup with IIS and the frontpage web extentions, i have also installed the .net framework v2.0 on it and done all the windows updates. i have given app_data read/write access for the aspnet and network service users.i used the copy site feature of vwd to install on the xp box and although the site seems to workwhen it needs to bind a gridview to my sqldatasource it gives an error Cannot open user default database. login failed.Loginfailed for user 'rlxpaspnet'Any ideas? i have googled and tried all sorts, but to no avail, so i throw my self on your mercy!Cheers,russ
View 5 Replies
View Related
Jul 3, 2001
Hello all!
I've a problem with my database. Till yesterday the option for Auto Grow of Database (10 %) was working very fine, but now it seems to be some problems with it. Finally I had to specify a restricted size for the database and then it again startd to give me some space in the database to write in. Ideally it should have worked automatically, isnt it ???
There is no problem with the space on the drive, I still have some 76 gb of free space there ...
Thanks in advance ...
Anjä
View 1 Replies
View Related
Apr 27, 2007
Hello, I created a new Rs server, but when I try to deploy from visual studio, it asks me for username and password multiple times and never deploys.
I am an administrator on the RS server, even on the report folders.
I can access via IE to the report manager.
View 17 Replies
View Related
Nov 10, 2006
Hi ,
In the below procedure in emp table name column is not null.
so when i try to update null value it should rollback previous transactions and should not commit.
but it is updating the previous queries and raising error on 3rd query. not rolliing back. I need to rollback previous queries.
the xactstate i get here is 1.
Please help me with this.
ALTER PROCEDURE [dbo].[tran]
AS
BEGIN
SET NOCOUNT ON;
BEGIN TRY
BEGIN TRANSACTION
declare @name varchar(50)
set @name = null
update dept set dname='ddd' where id=10
update emp set name='eee' where id=354
update emp set name=@name where id=354
COMMIT TRANSACTION
END TRY
BEGIN CATCH
IF (XACT_STATE())=-1 ROLLBACK TRANSACTION
END CATCH
END
venp---
Hi ,
View 6 Replies
View Related
May 6, 2006
Hello, I tried this and it doesnt work, I just started up the service with -T flag on default instance but I havent been able to start it with -T flag 1400 on named instances.
How can I Know that the directory MSSQL.4 is the MIRROR instance??
C:Archivos de programaMicrosoft SQL ServerMSSQL.4MSSQLBinn>sqlservr.exe -T
1400 MIRROR
I tried LUCHOMIRROR, MSSQLSERVER$MIRROR
and It doesnt work
Thanks
Another question I have, in the documentation it says that mirroring is only for evaluation purposes and not for production environments, what does it suppose to mean? MSFT didnt test the mirroring feature enough? If its not suppoerted why its included..?
Microsoft support policies do not apply to the database mirroring feature in SQL Server 2005. Database mirroring is currently disabled by default, but may be enabled for evaluation purposes only by using trace flag 1400 as a startup parameter. (For more information about trace flags, see Trace Flags (Transact-SQL).) Database mirroring should not be used in production environments, and Microsoft support services will not support databases or applications that use database mirroring. Database mirroring documentation is included in SQL Server 2005 for evaluation purposes only, and the Documentation Policy for SQL Server 2005 Support and Upgrade does not apply to the database mirroring documentation.
View 1 Replies
View Related
Apr 27, 2008
Hello everybody,
have following problem:
I need info from 2 Tables. from the Table 2 I just need 1 column. When i ask for this column the output I get is data repeating themselve many times.
Distinct, should give me unique data, but is doesnt....
the code:
SELECT DISTINCT FSenddate, FSupplyIDName, FSupplyerNumber,FBillNo,FSourceBillNo,FItemName,FItemModel,
FAuxQty,FAuxTaxPrice,FHeadSelfP0237
FROM vwICBill_26
WHERE FSenddate BETWEEN DATEADD(dd,-14,GETDATE()) AND GETDATE()
This code just works in Table1 (vwICBill_26)
but with table 2 (vwICBill_1)
SELECT DISTINCT vwICBill_26.FSenddate,vwICBill_26.FSupplyIDName,
vwICBill_26.FSupplyerNumber,vwICBill_26.FBillNo,
vwICBill_26.FSourceBillNo,vwICBill_26.FItemName,
vwICBill_26.FItemModel,vwICBill_26.FAuxQty,
vwICBill_26.FAuxTaxPrice,vwICBill_26.FHeadSelfP0237,
vwICBill_1.FDate,vwICBill_1.FContractBillNo
FROM vwICBill_26,vwICBill_1
WHERE vwICBill_26.FSenddate BETWEEN DATEADD(dd,-14,GETDATE()) AND GETDATE()
AND vwICBill_1.FContractBillNo=vwICBill_26.FSourceBillNo
The last sentence is the problem
I want that it shows me the data that is not equal.
As soon as I implement the not equal it shows me the massive repeating data.
I mean even without the last sentence I get this data output.
All together, I want a clear database output without data repeating.
Any ideas how it may work without DISTINCT?
I think this problem is a typical amateure problem, but I would apreciate help!
View 2 Replies
View Related
Jul 22, 2006
Hello, I am trying to make this.
CREATE PROCEDURE [dbo].[P_SEL_ALLPERSONAS]
@nmpersona int,
@sortorder varchar(20)
AS
BEGIN
select nmpersona, dsprimernombre, dssegundonombre,
dsprimerapellido, dssegundoapellido
from personas
order by @sortorder
END
But I got this error. Please help
Msg 1008, Level 16, State 1, Procedure P_SEL_ALLPERSONAS, Line 13
The SELECT item identified by the ORDER BY number 1 contains a variable as part of the expression identifying a column position. Variables are only allowed when ordering by an expression referencing a column name.
View 5 Replies
View Related
Jun 21, 2006
Hi,
The distributed query seems to work on the management studio of the server where I have linked the other server to but not accross the network on other management studio with the same impersonated logins. The error I get is.
OLE DB provider "SQLNCLI" for linked server "usbo-sql01" returned message "Communication link failure".
Msg 10054, Level 16, State 1, Line 0
TCP Provider: An existing connection was forcibly closed by the remote host.
Msg 18452, Level 14, State 1, Line 0
Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.
View 7 Replies
View Related
Mar 31, 2006
I am having the same problems as those in another post. SSIS package works fine when executed in BIDS and through execute package utility but it doesnt work when executed as a step in a job.
The other problem is that the logging also doesnt work when i try executing it as a job. So I have no clue about what to do without knowing what error it is. When I run the job it simply says the step has failed.
I have tried most of the solutions posted in other websites most of them to do with using proxies with credentials but havent hit a solution. I would love to get any input on what to do.
Thanks
View 6 Replies
View Related
Aug 1, 2007
Hello all,
I need help concerning a differential backup on a MSDB database.
I received this message when I tried to backup it
Log from Windows
Event Type: Error
Event Source: SQLVDI
Event Category: None
Event ID: 1
Date: 8/1/2007
Time: 2:03:37 PM
User: N/A
Computer: XXX
Description:
SQLVDI: Loc=SignalAbort. Desc=Client initiates abort. ErrorCode=(0). Process=9028. Thread=5928. Client. Instance=. VD=GlobalData Protector_(DEFAULT)_msdb_14_00_21.
Log from DataProtector
Normal] From: XXX "(DEFAULT)" Time: XXX
SQL statement:
BACKUP DATABASE [msdb] TO
VIRTUAL_DEVICE = "Data Protector_(DEFAULT)_msdb_06_00_14"
WITH NAME = 'Data Protector: 2007/08/01 0064', DIFFERENTIAL, BLOCKSIZE = 4096, MAXTRANSFERSIZE = 65536;
[Warning] From: XXX "(DEFAULT)" Time: XXX
Error has occurred while executing a SQL statement.
Error message: '<Microsoft SQL-DMO (ODBC SQLState: 42000):bdb>
[Microsoft][ODBC SQL Server Driver][SQL Server]Cannot perform a differential backup for database "msdb", because a current database backup does not exist. Perform a full database backup by reissuing BACKUP DATABASE, omitting the WITH DIFFERENTIAL option.
[Microsoft][ODBC SQL Server Driver][SQL Server]BACKUP DATABASE is terminating abnormally.'
Ive tried to do a full followed straight after by a diff but doent help.
Thank you for your help
View 7 Replies
View Related
Feb 26, 2008
in both vs2008 I added a ReportViewer control to my WinForm, intending to render an RS 2005 report remotely. In the design pane (Report Viewer Tasks Popup) I specify <server report>,
URL http://server name/reportserver$instance name
path /folder/report name
and everything is fine.
When I set these values in c# as
reportViewer1.ProcessingMode = ProcessingMode.Remote;
reportViewer1.ServerReport.ReportServerUrl = new Uri("http://server name/reportserver$instance name");
reportViewer1.ServerReport.ReportPath = "/folder/report name";
I started getting a msg saying "the source of the report definition has not been specified". If I hit refresh, the report renders. Before I started playing with the designer setting, and only had the c# stuff specified, I wouldnt even get the message, the control would appear with all RS buttons (eg page forward arrow etc) disabled.
Does anybody know why the message is appearing and how to get c#'s settings to work immediately like designer settings?
View 1 Replies
View Related
Jun 28, 2007
Hi,
I just upgraded to SQL server 2005 and some of my Openrowset to Oracle doesnt work. I found out that the issue occur with field with structure Numeric.
The issue is not solve even when I try to cast the field to varchar. sometimes it succeeded and sometimes I get error 7320 & 7321.
I'm using Oracle connector from SQL to Oracle.
I've 64 bit SQL Server.
Attach the code, the Numeric field is SCORE.
select *
FROM
OPENROWSET('ORAOLEDB.ORACLE',aaaa;bbbb;cccc,
'SELECT AUDIT_OPRID, AUDIT_STAMP, AUDIT_ACTN,EMPLID, ACCOMPLISHMENT, MAJOR_CODE,
CAST(SCORE AS Varchar(250))
FROM SYSADM.PS_RTA_ACCOMPLISHM WHERE 1=2')
Anyone can advice on resolution?
Thanks,
Assaf
View 6 Replies
View Related
Nov 16, 2007
While installing SQL Server 2005 Enterprise Edition on Windows Vista Ultimate
the setup alerts me "there are known compatibility problems, please
install SP2 after this". So ok, all went nice and installed without error.
IIS 7 installed fully, so all green in setup display.
(But after installation i do not see any service which begins with SQL***...)
At the end, the setup wanted to start the administration Tool.
Ok, but my name was not listed, so i could not add me to the permitted users.
I can not use any tool, because i have no rights.
Some Ideas?
Microsoft SQL Server Management Studio 9.00.3042.00
Microsoft Analysis Services-Clienttools 2005.090.3042.00
Microsoft Data Access Components (MDAC) 6.0.6000.16386 (vista_rtm.061101-2205)
Microsoft MSXML 3.0 4.0 5.0 6.0
Microsoft Internet Explorer 7.0.6000.16546
Microsoft .NET Framework 2.0.50727.312
Betriebssystem 6.0.6000
thanks Frank
View 6 Replies
View Related
Oct 3, 2006
I set up the "Send Email Task" succesfully with "SMTP Connection to myExchangeSERVER" using "Windows Authentication"
However, as we all know - you can't have html format for the Send Mail Task. BUT this piece of code straight from MSDN doesnt work for me - each time it pops up this "Mail Sent Succesfully" - but I receive NO freaking EMAILs!!! Am I missing something or is it another one of those Microsoft "gotchas" ?
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Runtime
Imports System.Net.Mail
Public Class ScriptMain
Public Sub Main()
Dim htmlMessageTo As String = "me.here@mydomain.com"
Dim htmlMessageFrom As String = "SSIS@mydomain.com"
Dim htmlMessageSubject As String = "SSIS Success - My Package"
Dim htmlMessageBody As String = _
Dts.Variables("User::HTMLtemplateText").Value.ToString
Dim smtpServer As String = "myExchangeSERVER"
SendMailMessage( _
htmlMessageTo, htmlMessageFrom, _
htmlMessageSubject, htmlMessageBody, _
True, smtpServer)
Dts.TaskResult = Dts.Results.Success
End Sub
Private Sub SendMailMessage( _
ByVal SendTo As String, ByVal From As String, _
ByVal Subject As String, ByVal Body As String, _
ByVal IsBodyHtml As Boolean, ByVal Server As String)
Dim htmlMessage As MailMessage
Dim mySmtpClient As SmtpClient
htmlMessage = New MailMessage( SendTo, From, Subject, Body)
htmlMessage.IsBodyHtml = IsBodyHtml
mySmtpClient = New SmtpClient(Server)
Dim myCred As New System.Net.CredentialCache()
mySmtpClient.Credentials = System.Net.CredentialCache.DefaultNetworkCredentials
mySmtpClient.Send(htmlMessage)
MsgBox("Mail sent")
End Sub
View 3 Replies
View Related
Feb 14, 2008
Hi, I have uploaded my site to a server, when I try to login, an action that requires the aspnetdb.mdf database it throws up this error: Could not find stored procedure 'dbo.aspnet_CheckSchemaVersion'.
Description: An
unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the
error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Could not find stored procedure 'dbo.aspnet_CheckSchemaVersion'. Any ideas? My connectionstrings, without passwords are: <connectionStrings> <clear/> <remove name="LocalSqlServer"/>
<add name="LocalSqlServer" connectionString="Data
Source=tcp:sql2k512.discountasp.net;Initial
Catalog=SQL2005_*****_data;User
ID=SQL2005_*****_data_user;Password=*******;"
providerName="System.Data.SqlClient"/> <remove name="InsertTickets"/>
<add name="InsertTickets" connectionString="Data
Source=tcp:sql2k512.discountasp.net;Initial
Catalog=SQL2005_******_data;User
ID=SQL2005_*******_data_user;Password=*******;"
providerName="System.Data.SqlClient"/> <remove name="Membership"/>
<add name="Membership" connectionString="Data
Source=tcp:sql2k512.discountasp.net;Initial
Catalog=SQL2005_******_data;User
ID=SQL2005_*******_data_user;Password=*******;"
providerName="System.Data.SqlClient"/> </connectionStrings>
View 1 Replies
View Related
May 23, 2007
Hi
How does a SCD work?
e.g
does it build has values for inbound value and compare it to a stored hash value to determine if a change exists?
Are each of the attributes chequed one by one for a change?
Does a lookup occur at somepoint on the target table. i.e If I have a 16m row table will it lookup and cache all 16m rows or is it smart enough to only lookup and cache the rows that it expects based on a PK value
Basically what I'm asking is for a technical explanation as to how it works and how to tune it or the underlying data to make it perform well.
Thanks for your help
Marcus
View 7 Replies
View Related
May 31, 2007
Hi,
We tried to create a new database on an application server (Win 2003 server/SQL Server 2003) and got the following error.
error 945....
....
device activation error. The physical filename g:m
ssqldata emplog.ldf may be incorrect.
The interesting thing is that tempdb is on f:mssql as shown in the database properties and with sp_dbhelp.
Poking around in master the real wierdness comes through. sysaltfiles has 2 entries each for tempdb logs and data files. One of them is on g: and one is on f:. The lower dbid is on f: and the higher one is on g: (actually the last two rows in the table).
Several months ago our software vendor moved tempdb from g: to f: to try and speed it up a bit. Appearantly they messed it up and now have written us off till WE fix it.
The entries in sysaltfiles were the only references to g: that turned up (though we didn't look at every table and aren't even remotely sure where other references might be located).
Any pointers on getting this corrected would be greatly apprecieated. We thought about trying a reconfigure and restarting but I'm not real hopeful. We also thought about just updating the wrong entries to reflect the right locations but that smacks of kluge.
Tangential wierdness is that while trying to isolate the source of g:mssql in the error I found that in master.sysdevices the file location is e:Program FilesMicrosoft SQL ServerMSSQLdata empdb.mdf.
I believe this is from the initial install then while configuring the server it got moved to g: then to f:.
HELP!!!
Thanks in advance for any input!
Rusty
View 3 Replies
View Related
Jul 28, 2004
I'm taking the Administration of a DB wich it has on system table sysaltfiles some leftoff files that are not being used anymore on TempDB,
how can i remove them ? Every time i restart the SQL Service it tries to open those files on sysaltfiles..
I tried ALTER DATABASE tempdb remove file XXXX , it did not work...
I got this error:
ALTER DATABASE failed. Some disk names listed in the statement were not found. Check that the names exist and are spelled correctly before rerunning the statement.
View 1 Replies
View Related
Aug 2, 2007
I succesfully did a MSSQL "file" restore of production to a different node yesterday. But failed to apply any transaction logs, it complained that one of the files have not been restored. On further investigation I found that one of the files are missing in sysfiles, but the file is in sysaltfiles.
This SQL statement does not return the same number files.
SELECT * FROM <DB>..sysfilesSELECT * FROM master..sysaltfiles WHERE dbid= DB_ID('<DB>')
sp_helpdb '<DB>' gives the same result as sysfiles.
Any idea on how to fix this ?
Thanks
Tiaan
View 7 Replies
View Related
Jan 18, 2007
Try a little experiment. Partly to humor me, and make me believe I am not quite insane.
Step 1: Install SQL server 2000, such that the data files are not in the default location, but in a location with a shorter path (i.e. install the data files to E:MSSQL8).
Step 2: Run the following queries, and comment on any oddities:
select filename
from master..sysaltfiles
where dbid = 2
go
select reverse(rtrim(filename)), filename
from sysaltfiles
where dbid = 2
go
select reverse(rtrim(filename))
from sysaltfiles
where dbid = 2
I am guessing that #2 is some sort of odd effect caused by the fixed length data field, but I just want to make sure that other people get this oddity, and not just me. I have no idea what could be causing the third output...or perhaps the lack of it.
View 2 Replies
View Related
Jun 16, 2006
I am having problems exporting data into a flat file using specific code page. My application has a variable "User::CodePage" that stores code page value (936, 950, 1252, etc) based on the data source. This variable is assigned to the CodePage property of desitnation file connection using Property expression.
But, when I execute the package, the CodePage property of the Destination file connection defaults to the initial value that was set for "User:CodePage" variable in design mode. I checked the value within the variable during runtime and it changes correctly for each data source. But, the property of the destinatin file connection doesn't change and results in an error.
[Flat File Destination [473]] Error: Data conversion failed. The data conversion for column "Column01" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
[DTS.Pipeline] Error: The ProcessInput method on component "Flat File Destination" (473) failed with error code 0xC02020A0. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
If I manually update the variable with correct code page and re-run the ETL, everything works fine. Just that it doesn't work during run-time mode.
Can someone please help me resolve this.
Thanks much.
View 5 Replies
View Related
Nov 5, 2007
Hi,I have a button with code to update a column in a table, and insert other values into another table.I currently have it working to update the column, but not insert.It gives an error message, but still updates the column. It doesn't insert, which leads me to believe the error is somewhere in the insert code..It isn't giving me any red squiggly lines in the code though, and the error doesn't show where its referring to, just giving a stack trace.. Error: Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near ')'.Incorrect syntax near '@User'.Stack: [SqlException (0x80131904): Incorrect syntax near ')'.Incorrect syntax near '@User'.] System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) +180 System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +68 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +199 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +2411 System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) +147 System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) +1089 System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) +314 System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) +413 System.Data.SqlClient.SqlCommand.ExecuteNonQuery() +115 detailproview.ExecuteInsert(String quantity) +452 detailproview.Button2_Command(Object sender, CommandEventArgs e) +79 System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +75 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +155 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4886 Code:private bool ExecuteUpdate(int quantity){ SqlConnection con = new SqlConnection(); con.ConnectionString = "Data Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\ASPNETDB.MDF;Integrated Security=True;User Instance=True"; con.Open(); SqlCommand command = new SqlCommand(); command.Connection = con; TextBox TextBox1 = (TextBox)FormView1.FindControl("TextBox1"); Label labname = (Label)FormView1.FindControl("Label3"); Label labid = (Label)FormView1.FindControl("Label13"); command.CommandText = "UPDATE Items SET Quantityavailable = Quantityavailable - @qty WHERE productID=@productID"; command.Parameters.Add("@qty", TextBox1.Text); command.Parameters.Add("@productID", labid.Text); command.ExecuteNonQuery(); con.Close(); return true;} private bool ExecuteInsert(String quantity) { SqlConnection con = new SqlConnection(); con.ConnectionString = "Data Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\ASPNETDB.MDF;Integrated Security=True;User Instance=True"; con.Open(); SqlCommand command = new SqlCommand(); command.Connection = con; TextBox TextBox1 = (TextBox)FormView1.FindControl("TextBox1"); Label labname = (Label)FormView1.FindControl("Label3"); Label labid = (Label)FormView1.FindControl("Label13"); command.CommandText = "INSERT INTO Transactions (Usersname)VALUES (@User)"+ "INSERT INTO Transactions (Itemid)VALUES (@productID)"+ "INSERT INTO Transactions (itemname)VALUES (@Itemsname)"+ "INSERT INTO Transactions (Date)VALUES (+DateTime.Now.ToString() +)"+ "INSERT INTO Transactions (Qty)VALUES (@qty)"+ command.Parameters.Add("@User", System.Web.HttpContext.Current.User.Identity.Name); command.Parameters.Add("@Itemsname", labname.Text); command.Parameters.Add("@productID", labid.Text); command.Parameters.Add("@qty", TextBox1.Text); command.ExecuteNonQuery(); con.Close(); return true; }protected void Button2_Click(object sender, EventArgs e){ TextBox TextBox1 = FormView1.FindControl("TextBox1") as TextBox; ExecuteUpdate(Int32.Parse(TextBox1.Text) );}protected void Button2_Command(object sender, CommandEventArgs e) { if (e.CommandName == "Update") { TextBox TextBox1 = FormView1.FindControl("TextBox1") as TextBox; ExecuteInsert(TextBox1.Text); } }} If anyone can help, ill be very grateful!! Thanks!Jon
View 7 Replies
View Related
May 25, 2007
Till yesterday every thing was fine....after i installed visual studio...god knws wat happnd dat it was not working, i did everything again but noe using my asp.net forms i am unable to write/edit/update the database, though i can view the same.....can any one suggest was might b d problem.
(i have set permissions for IUSER bot Read and Write)
View 2 Replies
View Related