Any experience with upgrading from 6.5 to 7.0 and changing sort order / code page in the process? Does this cause problems or matter? We're trying to go with a standard and the servers I need to upgrade aren't at that code page standard.
Thanks..
I am having problems exporting data into a flat file using specific code page. My application has a variable "User::CodePage" that stores code page value (936, 950, 1252, etc) based on the data source. This variable is assigned to the CodePage property of desitnation file connection using Property expression.
But, when I execute the package, the CodePage property of the Destination file connection defaults to the initial value that was set for "User:CodePage" variable in design mode. I checked the value within the variable during runtime and it changes correctly for each data source. But, the property of the destinatin file connection doesn't change and results in an error.
[Flat File Destination [473]] Error: Data conversion failed. The data conversion for column "Column01" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
[DTS.Pipeline] Error: The ProcessInput method on component "Flat File Destination" (473) failed with error code 0xC02020A0. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
If I manually update the variable with correct code page and re-run the ETL, everything works fine. Just that it doesn't work during run-time mode.
Can someone please help me resolve this.
Thanks much.
Hi,
I want to change the "dictionary Sort Order" in SQL Server 7.0. What will be the impact? What is the safe way to do it?
Under MSSQL7INSTALL there is a file called instcat.sql. Should I run this file to change the catalog settings?
Any help is appriciated.
Thanks
Sri
For a variety of reasons we need to change the default sort order in a SQL7 installation on about 25 servers. It's currently case insensitive, but we need to change it to case sensitive. To do this we propose to deinstall and reinstall SQL. In order to preserve the data in the tables can anyone suggest the correct procedure.
Thanks
Mark
Hello
I have a table with a RowNumber Group which shows 10 rows in each page.
it works fine.
in the next step i put an Interactive sorting on one column.
i expect that the sorting is on the table no regarding the presentation which shows only 10 rows.
in reality what happens is that the table was sorted seperated for each part of the 10 rows table,
and no for the whole table.
does any one have a suggestion how to force the Interactive Sort , sorting he Whole table first
and only later to present 10 rows each page (use the group expression)
Thanks,
Hi,
I have a report that needs sorting on a column that is calculated. however, the calculation is so complex (iterative calculations) i've had to do that within my custom code. I am getting the results back well and good but i cannot perform a sort based on that.
My problem is: how do i write a custom sort expression function that will direct the column to sort my table based on say the value(s) returned from that function. I want for example:
Code Snippet
Public Function mySortExpression(byVal myIDorWhatever as Something) as CustomSortableExpression
' Perform some calculation
' Return some value(s)/array or anything that the column can appreciate and sort the table accordingly with
End Function
then in say the Interactive Sort Sort Expression, i'll have the code:
Code Snippet
=code.MyClass.mySortExpression(myID)
I hope i've made myself clear enough.
Cheers
I have a SSRS report with data in below format.
ID Name Date
1 A null
2 B 01/01/2012
3 C 01/02/2013
Also, I have a sort parameter @sort and values are (Name, ID, Date)
I want to apply page break whenever @sort=Name. There should be no page break when user selects @sort = ID or Date. Page break should happen only when @sort value = Name
it should be like this...
Page 1:
ID Name Date
1 A null
Page 2:
ID Name Date
2 B 01/01/2012
Page 3:
ID Name Date
3 C 01/02/2013
I need achieving the above task.
Dear all,
I am having a problem with the footer in my SQL Reporting Services project. I am trying to print a disclaimer in a text box on the last page in the footer. I can get the text box in the footer just fine but as the disclaimer is quite a lengthly multi line text string the footer has to be enlarged in order to fit the whole text box in.
This causes a problem on all the other pages where even though the footer is not displayed on pages before the last page it still takes up space stopping other data from being displayed where the footer would normally be.
Is there a way for me to set the footer size to a default value all all pages except the last page? I just want to enlarge the footer to about 1.5" on the last page to print my disclaimer without effecting the other pages layout.
Many thanks in advance,
Trevor Keast
Hello,
Has anyone come up with an easy way to change the code page sort order in the master database. Unfortunately, I inherited two machines running different codes and neither one is ANSI standard. I would like to get them both back to ANSI. Each one contains approximately 15 custom databases.
Any suggestions except prayer would be much appreciated.
Thanks,
Hi
I have a strange problem that basically consists of showing a report in Internet Explorer and then using the same Internet Explorer window to show an asp.net page that contains some form where the user can enter some data. In this scenario, the form won't be processed on the server. I really need to know why and how I can work around this problem.
Precisely the problem can be reproduced like this:
Environment: Server: Windows 2003 Standard Server SP1 (German), IIS 6, Client: Windows XP SP2, Internet Explorer 6
First I open a new Internet Explorer Window and let it show me a Reporting Services Report (by entering its url into the address bar). Everything works. Then I change the address to a simple web application's address that is built with asp.net (.net 1.1). The application contains only a form with a submit-button, a text box and a label, that shows the textbox' text after submit was clicked. But when I click the submit button, although the form seems to have been sent to the server (the green progress bar in the status bar is flickering), it's reset. So the label does not show the value I have entered into the the textbox and the textbox itself is cleared. This only happens when the browser was first showing a Report from Reporting Services, so when I open a new Browser Window and go directly to the web app, everything works fine.
It does not happen when I open the Browser directly on the server.
Thank you
Christian
Hi, I have a formview with a label databound field in it. I want to change the labels CssClass property from code behind AFTER the record has been updated using a sqldatasource. In which event do I change the CssClass property? Or do I use Attribute.Add instead of setting the CssClass? Or is there some other property/method/way to accomplish this? Thanks, Z
View 2 Replies View RelatedI am having a hard time finding materials on this subject. I am guessing I am using the wrong keywords to search. Basically, I want to be able to modify database tables through a web form. They can add columns and delete columns through the form. I would just want to default the type of column and the length. I am sure it has been done, I was just wondering if anyone had some resources they could throw my way. I would appreciate it. Thanks.
View 1 Replies View Related
I am curious to find out by other people on how they manage incremental code changes to SSIS packages. I am in a situation now where we deliver production SSIS packages to a client, where the client changes the connection details to the data sources and exectues the packages on a nightly basis.
We have had instances where clients are asking for enhancements and modifications to the SSIS package whereby we would develop it in our development environment then replace the existing copy in the clients production environment. There has been instances whereby the packages would work as desired on our end, but it requires further refinement on the clients side. As such, we have had instances where we had to "back-out" into the previous packages.
I am just trying to find out what methods or procedures other people are following to acknowledge situations like this or similar to this. Currently we are following an exhaustive method of having two copies of the code on the client side, the "live" code is never modified, just the secondary copy, then when all is good, we move this code into the "live" code. Does anyone have any means of performing incremental updates on SSIS packages easily?
Hello,
I am getting following error
Error: 0xC02020F4 at Data Flow Task, OLE DB Source [1]: The column "dbname" cannot be processed because more than one code page (936 and 1252) are specified for it.
Error: 0xC02020F4 at Data Flow Task, OLE DB Source [1]: The column "dbsize" cannot be processed because more than one code page (936 and 1252) are specified for it.
Error: 0xC02020F4 at Data Flow Task, OLE DB Source [1]: The column "Owner" cannot be processed because more than one code page (936 and 1252) are specified for it.
Error: 0xC02020F4 at Data Flow Task, OLE DB Source [1]: The column "Status" cannot be processed because more than one code page (936 and 1252) are specified for it.
Error: 0xC02020F4 at Data Flow Task, OLE DB Source [1]: The column "CompLevel" cannot be processed because more than one code page (936 and 1252) are specified for it.
When I run the package itself it is working fine and when I am calling the package from another package getting this error. From Parent package I sending servername for olde db source to this package.
Thanks.
Hi,
I have the following Sql Data Source that I wish to bring back on my page:
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:FrogConnectionString %>"
SelectCommand="ProposalsCheckNewCustomerData" SelectCommandType="StoredProcedure">
<SelectParameters>
<asp:FormParameter FormField="MaritalStatusID" Name="MartialStatusID" Type="Int32" />
<asp:FormParameter FormField="LivingStatusID" Name="LivingStatusID" Type="Int32" />
<asp:FormParameter FormField="DealerID" Name="DealerID" Type="Int32" />
<asp:FormParameter FormField="VehicleTypeID" Name="VehicleTypeID" Type="Int32" />
<asp:FormParameter FormField="FinanceTypeID" Name="FinanceTypeID" Type="Int32" />
<asp:FormParameter FormField="MediaSourceID" Name="MediaSourceID" Type="Int32" />
<asp:FormParameter FormField="DealerContactID" Name="DealerContactID" Type="Int32" />
</SelectParameters>
</asp:SqlDataSource>
The recordset brings back 7 values that I wish to populate into 7 Labels.
1. Should the SqlDataSource be on the page (between the Head tags) or within the Page_Load command of the Page Behind ?- If its on the page behind do any of you have any sample code to show me how to get the recordset up and running ?
2. How would I bind the results to a label ?- Within my old asp pages it was simple (I'm not saying its not simple here, I am still getting my head around vb.net)- eg <%=rsX("MaritalStatus")%> I guess its something very similar
Thanks for any pointersFizzystutter
I'm grabbing data from a DB2 database on an AS/400.
Everything seemed fine and dandy until I started on one particular very big table. It turns out that some of the text fields in this table have characters specific to French. i.e. the funny 'oe' character and something that looks like at shrunken '<' sign.
The error being generated is:
Code Snippet
Text was truncated or one or more characters had no match in the target code page
The Code page on the DB2 box is 285, the default code page on the target SQL Server box is 1252. I've tried forcing the use of the default code page (1252), but the same happens.
Anyone know what I'm doing wrong? Is there another Code page value I should try using?
Hi yeah.
I am doing a project which retrieves data from a AS/400 machine.
The code page of the machine is 420.
I used "OLE DBIBM DB2 UDB for iSeries IBMDASQL OLE DB Provider" to connect from SQL Server.
The problem is, all the arabic characters coming from this machine becomes unreadable, becoming some machine code text.
What could be the problem and how can I solve this?
Thank you.
I have a very nasty error on ssis,
Text was truncated or one or more characters had no match in the target code page
This can not be truncation because the field is empty, the second thing is that when i read the file it reads 62000 odd rows but there are 64000 rows.
if i just read the entire file and write the entire file in a scipt i loose 13 rows
I have tried different code pages and non have worked.
Does anyone have an idea
I am importing some data from my IBM DB2 Z/OS mainframe to SQL Server 2005 using the SSIS import wizard. The wizard automatically converted the DB2 string data before trying to store it to SQL Server. The code page that the wizard chose to do its conversion is the 1252 Ansi Latin. However, I am getting the following error on the address field...."one or more characters had no match in the target code page". Can someone suggest another code page? ASCII? IBM 37?
View 3 Replies View RelatedCan anyone tell me y is this error occuring?
[01989 Flat File Source [1781]] Error: Data conversion failed. The data conversion for column "StreetAddress1" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
[01989 Flat File Source [1781]] Error: The "output column "StreetAddress1" (1822)" failed because truncation occurred, and the truncation row disposition on "output column "StreetAddress1" (1822)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
[01989 Flat File Source [1781]] Error: An error occurred while processing file "G:MembershipUpdatesLocalSubmissions 1989TabDelimitedText 1989_raw.txt" on data row 957.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "01989 Flat File Source" (1781) returned error code 0xC0202092. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
Please help me to solve this
Trying to update my local developer version of SQL Server 2005 SP1 to SP2. The setup program terminates with the following information dumped from the logs. Not sure if it is related, but I recently installed the SQL Server 2005 Compact Edition (tools, runtime, etc) on the same development machine. It is a little too deep for me to figure out
Darryl
Here are the last few lines of the HotFix.Log
04/24/2007 14:46:48.374 MSP Error: 29527 The setup has encountered an unexpected error in datastore. The action is RestoreSetupParams. The error is : Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:27:59 2006
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 138
----------------------------------------------------------
Failed to read property "InstallIds" {"MachineConfiguration", "", "DUTTONDARRYL1"} from cache
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:27:59 2006
Function Name: CachedPropertyCollection:etProperty
Source Line Number: 164
----------------------------------------------------------
Unable to write property into cache: IsClustered
Source File Name: datastoredatastorecacheschema.cpp
Compiler Timestamp: Wed Jun 14 16:28:00 2006
Function Name: DataStoreCacheSchema::writeProperty
Source Line Number: 115
----------------------------------------------------------
Unable
04/24/2007 14:46:48.694 MSP returned 1603: A fatal error occurred during installation.
04/24/2007 14:46:48.790 Registry: Opened registry key "SoftwarePoliciesMicrosoftWindowsInstaller"
04/24/2007 14:46:48.790 Registry: Cannot read registry key value "Debug"
04/24/2007 14:46:48.806 Copy Engine: Error, unable to install MSP file: c:f01fc31fd0988e3807HotFixSQLFilessqlrun_sql.msp
04/24/2007 14:46:48.822 The following exception occurred: Unable to install Windows Installer MSP file Date: 04/24/2007 14:46:48.822 File: depotsqlvaultstablesetupmainl1setupsqlsesqlsedllcopyengine.cpp Line: 800
******************************************************
Now the SQL9_Hotfix_KB921896_sqlrun_sql.msp.log shows this as the last few lines
MSI (s) (A4:38) [14:46:48:630]: Product: Microsoft SQL Server 2005 - Update 'Service Pack 2 for SQL Server Database Services 2005 ENU (KB921896)' could not be installed. Error code 1603. Additional information is available in the log file C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log.
MSI (s) (A4:38) [14:46:48:630]: Note: 1: 1729
MSI (s) (A4:38) [14:46:48:630]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:630]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:662]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:678]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:678]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:678]: Product: Microsoft SQL Server 2005 -- Configuration failed.
MSI (s) (A4:38) [14:46:48:678]: Attempting to delete file c:WINDOWSInstaller6749ee3.msp
MSI (s) (A4:38) [14:46:48:678]: Unable to delete the file. LastError = 32
MSI (s) (A4:38) [14:46:48:694]: Cleaning up uninstalled install packages, if any exist
MSI (s) (A4:38) [14:46:48:694]: MainEngineThread is returning 1603
MSI (s) (A4:2C) [14:46:48:694]: Destroying RemoteAPI object.
MSI (s) (A4:04) [14:46:48:694]: Custom Action Manager thread ending.
=== Logging stopped: 4/24/2007 14:46:48 ===
MSI (c) (58:E4) [14:46:48:694]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (58:E4) [14:46:48:694]: MainEngineThread is returning 1603
=== Verbose logging stopped: 4/24/2007 14:46:48 ===
*************************************************************
The Summary.txt looks like this
Time: 04/24/2007 14:46:48.854
KB Number: KB921896
Machine: DUTTONDARRYL1
OS Version: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Package Language: 1033 (ENU)
Package Platform: x86
Package SP Level: 2
Package Version: 3042
Command-line parameters specified:
Cluster Installation: No
**********************************************************************************
Prerequisites Check & Status
SQLSupport: Failed
**********************************************************************************
Products Detected Language Level Patch Level Platform Edition
Database Services (MSSQLSERVER) ENU SP1 2005.090.2047.00 x86 DEVELOPER
Analysis Services (MSSQLSERVER) ENU SP1 2005.090.2047.00 x86 DEVELOPER
Reporting Services (MSSQLSERVER) ENU SP1 9.00.2047.00 x86 DEVELOPER
Notification Services ENU SP1 9.00.2047.00 x86 DEVELOPER
Integration Services ENU SP1 9.00.2047.00 x86 DEVELOPER
SQL Server Native Client ENU 9.00.2047.00 x86
Client Components ENU SP1 9.1.2047 x86 DEVELOPER
MSXML 6.0 Parser ENU 6.00.3890.0 x86
SQLXML4 ENU 9.00.2047.00 x86
Backward Compatibility ENU 8.05.1704 x86
Microsoft SQL Server VSS Writer ENU 9.00.2047.00 x86
**********************************************************************************
Products Disqualified & Reason
Product Reason
**********************************************************************************
Processes Locking Files
Process Name Feature Type User Name PID
**********************************************************************************
Product Installation Status
Product : Database Services (MSSQLSERVER)
Product Version (Previous): 2047
Product Version (Final) :
Status : In Progress
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log
Error Number : 29527
Hi!
How one can find out the character set/code page set during SQLServer installation?
Thanks,
Fabio
I migrate from sql server 6.5 to sql server 7.0, and i'm having problems
with the information that returns me, when i was using 6.5 version
everythings was fine, but now that i'm using 7.0 version sql returns me
unknow characters instead of latin characters, somebody tells me that
i've installed different character set and code page in sql server 7
than Sql Server 6.5 , if this is right what can i do to repair this
mistake that i've made, ther is a way to change the code page and
character set in sql 7.0. Or maybe i have to look an sql driver
compatible, or this is a crazy idea?.
Hi
We have the problem with Text data type. We can insert into Text column from few work stations but not from few. This is the following error we are getting
COde page translations are not supported for the text data type. From:1252 To: 850.
If anybody has solutions advance thanks to them.
Thanks,
Rau
Hi All,
we have a set of packages which has to to be implemented across differnet environments.
the packages invariable uses OLEDB Source/Destination Components.
In these two components the Code Page Property is not Configurable.
so if the package has to be Deployed in a different environment than,where it is Developed it gives a Validation Error.
Is there a Workaround for this problem.
if anybody have faced the problem earlier,please post it.
thanks in advance.
cheers
srikanth
Hello again!
I got a problem using an OLE-DB Source in my data flow task. It is an Informix-Server using the newest OLE DB-Driver provided by IBM. However, when I set up the OLE DB-Source with connection manager and SQl-Query, I get the following warning message:
Warning at {2B334CA3-A792-4BC2-93AA-12FADCF1E696} [OLE DB Source [45]]: Cannot retrieve the column code page info from the OLE DB provider. If the component supports the "DefaultCodePage" property, the code page from that property will be used. Change the value of the property if the current string code page values are incorrect. If the component does not support the property, the code page from the component's locale ID will be used.
Later when I try to execute the package, the destination adapter gets errors like
Error 3 Validation error. Data Flow Task: OLE DB Destination [2985]: Columns "antrag" and "Antrag" cannot convert between unicode and non-unicode string data types. Informix_OLEDB.dtsx 0 0
I guess that SQL Server cannot get the data types from the Source.
Has anyone an idea? Thanks in advance!
I've been reading some forums and I'm not able to get this to work. Basically I'm using an Oracle DB source and trying to import data into SQL server 2005. I guess the best connections to use are OLE DB.
Here are my current connections:
Source: Native OLE DBOracle Provide for OLE DB
Destination: Native OLE DBSQL Native Client
I'm running SP2 of SQL 2005.
Now, the issue is I'm not getting the code page stuff correct. In the data flow I'm just doing a OLE DB Source to SQl Server Destination. I'm not doing any transformations (I'm hoping to avoid doing that).
I'm getting an error:
[OLE DB Source [1]] Warning: Cannot retrieve the column code page info from the OLE DB provider. If the component supports the "DefaultCodePage" property, the code page from that property will be used. Change the value of the property if the current string code page values are incorrect. If the component does not support the property, the code page from the component's locale ID will be used.
I'm looking at how to set the DefaultCodePage property in various forums, but nowhere does it say exactly how to do this. I've tried changing the "Extended Properties" and added AlwaysUseDefaultCodePage=TRUE in there, but that doesn't work. I've tried changing the Locale Identifier to 1252 that doesn't work. I've tried a combination of the two, doesn't work. Can somebody tell me two things:
1. what's the best/fastest/industry used method to get data from Oracle into SQL server via SSIS (please include the type of connections).
2. How the hell do you set the DefaultCodePage property. I would love a screenshot on this one as well.
Thanks,
Phil
Is there a simple way to avoid having to use a data conversion task to convert Unicode data (from DB2) to ANSI format (for insert to Oracle)?
I'm hoping that there is a way to set the code page property on the OLEDB driver so that it implicitly converts to the format I want instead of having to explicitly force the conversion in the package.
Thoughts? suggestions?
-Clayton
I'm using the IBM DB2 UDB for iSeries IBMDA400 OLE DB Provider to connect to an AS/400 db2 database
I'm trying to do a simple pull through of table data.
My connection string is :
Code Snippet
Provider=IBMDA400.DataSource.1;Data Source=WAS400;Persist Security Info=True;Password=**********;User ID=svcorbit;Initial Catalog=S652F01E;Force Translate=0;Catalog Library List=OSLD1F3, PAOS21, OSLPLF3
I'm getting a code page conflict when I try to import the data into SQL Server. This happens when I edit the OLE DB Source component:
Code Snippet
The component reported the following warnings:
Warning at {47FF55CB-AA24-45A4-B0DC-2807EC6D3EC1} [OLE DB Source [3570]]: Cannot retrieve the column code page info from the OLE DB provider. If the component supports the "DefaultCodePage" property, the code page from that property will be used. Change the value of the property if the current string code page values are incorrect. If the component does not support the property, the code page from the component's locale ID will be used.
and at package validation level when trying to run:
Code SnippetError at Data Flow Task [OLE DB Destination [970]]: Column "ACRC10" cannot convert between unicode and non-unicode string data types.
I've tried using the default code page on the component, that doesn't work. I've tried changing the code page to 285 (which is what it is on the AS/400), that doesn't work.
I'm running out of ideas... help!
i have a sqldatasource on my asp.net page -- select * from table where id = @id
i want to set the @id in the backend and set the result to textbox1.text
how do i do this?
Does anyone know how to call a SQL store procedure that return a value to the page?
I've a simple data entry aspx page with several textboxes and a save button. When user fill out the form and click save/submit, it calls a store procedure to insert a row into a SQL table and automatically generate an ID that need to return the the page to display for the user.
Are there a similar article somewhere?
Thank you all!
Hi
I am upgrading a SQL 6.5 database with code page 850 to SQL 2000 with code page 1252.
The problem we have is any german "u" ( with the umlatt - two dots ) above it wont transfer.
I am using the SQL upgrade tool that comes with sql 2000 and have tried many different code pages in 2000 but no joy.
Can anyone help?
Thanks
J.
Hello,Does anybody know what is the documented and known behavior ofinserting/updating binary columns using host variables from a client to aserver which have different code pages? Will any code page / character setconversion take place? I am particulary interested in insert/update fromsubqueries.eg:insert into t1(binarycol) select :HV1 from t2versusinsert into t1(binarycol) select :HV1||charcol from t2update t1 set bytecol=:HV1versusupdate t1 set bytecol=:HV1||'abc'insert into t1 (bytecol) values(:HV1)versusinsert into t1 (bytecol) values(:HV1||'abc')Is the conversion dependent on the context?ThanksAakash
View 1 Replies View Related