I'm trying to convert an old chart to Reporting Services.
We have used the same dataset for years, it is very very simple. But it seems to me that Reporting Services can't deal with this simple dataset.
My question is: How can I get create a line chart using this dataset.
The data set consists of 1 row with 96 columns (a day divided into 96 sets of 15 minutes). Each column records how many events occurs within the 15 minutes. Along the x axis I would like to display a vertical line every 4 hours. The y axis should be numbered 0 to the highest value in the results.
I could not make this dataset any more simple than it is. But Reporting Services just chokes on this.
Here is a sample of the dataset :
1 2 0 4 5 6 7 8 9 10... 96
I have a simple-column chart and in the x-axis I put the date values and in the y-axis the sale price values.
The chart works perfectly in the case when there is only one sale price for the same date. But, when the price changes during the same day, then there is problem. In the following example
x y
1/1/2007 6.25
2/1/2007 7
2/1/2007 4
3/1/2007 8
the chart will have three columns and in the date 2/1/2007 will display the min or max of the two values. What I need is to represent all the values i.e. the chart must have four columns , as much as the rows of the dataset
Question (X-axis): How does automatic x-axis label positioning work? Answer: Currently, built-in Reporting Services charts only allow automatic positioning in order to avoid overlapping the x-axis labels. The label direction (horizontal/vertical) of the axis labels depends on the label string sizes and the available space. X-axis labels are either shown horizontally in one line, horizontally in multiple lines with line breaks, or vertically. Showing x-axis labels at an angle, or explicit manual control over individual x-axis label positions is currently not supported.
Note There are several third-party chart add-ins that enable more control over axis labels. These add-ins can be installed on top of Reporting Services 2005.
I have exactly the problem indicated above in that some sectors of my Pie Charts I am are trying to produce are small and are close together thus labels overlap in some cases. As it says above, only automatic placing of the labels is available, but there could be a solution through third party software.
Does anyone know of a 3rd party solution/add in or a workaround?
I created a graph which retrieves value from database.And currently,my axis is in ranged 0-10.But i have a doubt that my value in will exceed my maximum y-axis value 10..My question is, could it be possible that i make my y-axis dynamic??Thanks!!
Friends, I would like to put employee name and type of leave on the y-axis and on the x-axis the date, so that users can select the date start and end and employee/employees and see the chart or leaves. But how to do that? My fields are: Name, LeaveDescription and Date. The data with me is for each employee, for each date, leave codes are there.
I have a report where i am using line chart with date column for grouping. For X axis i have choosen the "NUmeric or Timescale Values". In the Chart the dates are displayed in this format 1/1/2007 12:00:00 AM . I don't want Time part to be shown
If possible i want it to be shown as 1-Jan. The Chart should display Point even when there is no record returned from the query.
Say DATE Column
Date AMOUNT 1/1/2007 12:00:00 AM 10 1/3/2007 12:00:00 AM 20 1/4/2007 12:00:00 AM 30
Now the Chart should plot from 1/1/2007 to 1/4/2007 including 1/2/2007
I have a pivot chart that displays 3 data series.Series 1 values range from 17 to 106.Series 2 values range from 1 to 18.Series 3 values range from 0 to 1.When I display all three series on the chart, the value axis labels run from1 to 120 with major unit lines at intervals of 20.When I remove Series 1, the chart automatically adjusts itself and thevalue axis labels run from 1 to 20 with lines at intervals of 2, thusnicely accommodating the value ranges of Series 1 and Series 2.All this is fine. But when I remove Series 2, leaving only Series 3,the labels run from 1 to 1.2 with interval spacing of .2. Since thesevalues are counts, it makes little sense to show decimal values.Can anyone provide advice on how to keep these axis labels fromshowing decimal values, if a user removes Series 1 and Series 2?Thanks.- Bob
I have a chart on a report that shows value in £ on the Y Axis. The values can be both positive and negative. I would like to have the negative labels to show in red and the positive in black. What is the expression syntax to achieve this? i know it will be an IIF statement, but what is the syntax to show the Y Axis label as <0?
eg if i was doing this for a field it would be iif(Field!Fieldname.value <0, "RED","BLACK") but what would i replace the FIELD!Fieldname.vaue with so the expression would change the Y Axis label.
Is changing the display format of the Y axis of a column chart supported in the Sept CTP or is it going to be supported in the official release? For example I have built a report model with the numeric sales values set as 'C' for currency and have created a simple bar chart with year on the category axis and sales on the Y axis. The problem is that the Y axis displays as a general number (10000000) and would like to display it as a currency ($10,000,000). I can't for the life of me figure out how to display the Y axis as currency in Report Builder.
I have a chart that I am grouping data by Year, Month, day then Hour (this is to view server performance data) - however i need the label for the hour grouping to be in the format of HH:MM and not H:M by using expression
please excuse my ignorance but if someone could point me in the right direction i would be grateful.
i have produce a chart with some data against date points on x axis. i have another date field which i want to combine with the orignal date axis is this possible .
ie
table
results planned date Acutual date 10 02/03/07 01/03/07 46 03/03/07 03/03/07 60 06/03/07 07/03/07
i want to combine the planned date and actual date as an x axis
I have a chart that I am grouping data by Year, Month, day then Hour (this is to view server performance data) - however i need the label for the hour grouping to be in the format of HH:MM and not H:M by using expression
The values on X-axis are scaled from -100 to +100. I want to colour the band from -100 to 0 with red colour and that from 0 to +100 in green colour, and i want to provide legend for these bands/sections. How can i do this?
What is the best optimised options to display the date labels with bi-weekly intervals starting date Date from one month to three months future from the current date?
As per above requirements, I have built the below line graph query and graph, currently it only displays the date labels as per data but I need to display date labels with bi-weekly intervals starting date from one month to three months future from the current date. Also another issue found, if there are few more date labels then does not show all labels on horizontal axis.
Select /* Set Week End date as Sunday */ DATEADD(DAY, 7 - DATEPART(WEEKDAY, t.TaskBaseline0FinishDate), CAST(t.TaskBaseline0FinishDate +1 AS DATE)) as[WeekEnd] ,count(t.TaskBaseline0FinishDate) as Baseline ,count(t.TaskFinishDate) as Finish
Hello, I need to know what means are available to change the Minimum and Maximum Y-Axis scale values rather than leave them simply as they are in the properties. Right now whatever min/max values I enter into the scale for the Y-Axis are unchangeable. I need to be able to change the min/max scale values based on the value of the data at run time.
I have a bubble chart created with Report Builder 3.0. I have the Y-axis series is along the left side of the chart. When all X values are positive, everything displays normally. However, if any X-axis values are negative, the whole graph shifts slightly leftward and the Y-axis title is no longer visible. It seems to be overwritten by the shifted graph or simply pushed into nondisplay area.
Is there something I can do to make the chart stay put?
I have created range bar chart and I am not able to achieve the following tasks.
1. Change X-axis Label Format to Quarter:
I have x-axis with dates and y axis of project groups. I have changed x-axis interval type = month and interval=3. Â Â Set the Maximum = Â Max(ProjectEndDate) and Minimum = Min(ProjectStartDate).
Now my chart showing 3 months x-axis interval dates in mm/dd/yyyy format. I want to change this interval date format to Quarter. The problem is LabelsFormat property is not recognize  the "=Q or q or quarter" and also not accepting the expressions. How can I achieve this?
2. Placing series side by side when it is not overlapping
I want to place the same group series side by side only when the previous project end date is less than next project start date, otherwise place the next project to next row. How can I achieve this?
I am working on a line chart. The variable on the X- axis is DateTime. The requirement is to have the values displayed with an interval of 4 hours (or mabe 5 or 6 hours - basically every regular intervals). I am using a list control to Subreports to show around 10 reports.
HOW can I do this? The Major and MInor intervals only help in separating which samples will be displayed. But we cannot configure for regular intervals. Please help.
my data fields are in seconds so my y-axis shows seconds. But i want to format Y-Axis so that instead of showing seconds it should show mm : ss so this is what i have tried, in the "format code" i put this :
=(Fields!Seconds.Value)/3600
to check if it shows the division result but it doesnt, t shows the exact same result as it was before. Further testing of something like:
=(Fields!Seconds.Value) & "%"
does display the percentage sign with the values but division isnt right.
I am new to this, can anyone tell me how this can be done?
In my report, I have StartDate and EndDate parameters.In my Line chart on x-axis i need to show the dates like this:Suppose startdate=1/1/2005 and enddate=12/31/2005 then x-axis labels like this:1/1/2005,4/1/2005,7/1/2005,10/1/2005,1/1/2006.In x-axis i put the Minimum value:Parameters.StartDate.Value and the Interval is 90( days),it is not working properly.
I have a simple column chart where the x axis is a week number, and the y axis is percent of sales. There are four charts on one page, so this chart is very small. There are only two bars on the chart, and I would like to have the value of the y axis, say 7.2%, be displayed on the bar itself. Currently, I can't decipher the exact value of each bar. Does anybody know if, and how, this can be accomplished? Thank you!
i'm trying to configure the Axis Scale Interval with the Values of the dataset(Category Fields) and not a defined or a auto scale values, i want each graph bar have an Axis value.
In my Case i have in the Category Fields (the X Axis) day type Values and i want each graph bar with a day. I''d dropped the field date to category fields but i can't get the days all followed i only can get the days by some stupid axis auto interval.
I'm trying to plot some data with integer x-axis values ranging from 1 to 1000. And I can't get the first x-axis label to be 0 rather than 1. Since I'm incrementing by 100, the rest of the labels are now 101, 201, etc. How do I get these to start at 0? (or even 100...as long as all data shows up)
In Excel it is possible to have a primary and a secondary axis. This would allow for a chart to show to related data sets that have vastly different scales. Is this possible in Reporting Services.
