i put the formula day(Parameters!Parameter1.Value) into my y-axis's major gridlines interval value, and it doesn't obey the value i put in.
is this a bug or another "feature"?
when i just type in "31" is works as expected.
is there a work around for this?
I have a simple-column chart and in the x-axis I put the date values and in the y-axis the sale price values.
The chart works perfectly in the case when there is only one sale price for the same date. But, when the price changes during the same day, then there is problem. In the following example
x y
1/1/2007 6.25
2/1/2007 7
2/1/2007 4
3/1/2007 8
the chart will have three columns and in the date 2/1/2007 will display the min or max of the two values. What I need is to represent all the values i.e. the chart must have four columns , as much as the rows of the dataset
Is it possible?
Hi All,
I am working on a line chart. The variable on the X- axis is DateTime. The requirement is to have the values displayed with an interval of 4 hours (or mabe 5 or 6 hours - basically every regular intervals). I am using a list control to Subreports to show around 10 reports.
HOW can I do this? The Major and MInor intervals only help in separating which samples will be displayed. But we cannot configure for regular intervals.
Please help.
Thanks in advance,
Manoj Deshpande.
I'm trying to convert an old chart to Reporting Services.
We have used the same dataset for years, it is very very simple. But it seems to me that Reporting Services can't deal with this simple dataset.
My question is: How can I get create a line chart using this dataset.
The data set consists of 1 row with 96 columns (a day divided into 96 sets of 15 minutes). Each column records how many events occurs within the 15 minutes. Along the x axis I would like to display a vertical line every 4 hours. The y axis should be numbered 0 to the highest value in the results.
I could not make this dataset any more simple than it is. But Reporting Services just chokes on this.
Here is a sample of the dataset :
1 2 0 4 5 6 7 8 9 10... 96
I created a graph which retrieves value from database.And currently,my axis is in ranged 0-10.But i have a doubt that my value in will exceed my maximum y-axis value 10..My question is, could it be possible that i make my y-axis dynamic??Thanks!!
View 5 Replies View RelatedFriends, I would like to put employee name and type of leave on the y-axis and on the x-axis the date, so that users can select the date start and end and employee/employees and see the chart or leaves.
But how to do that?
My fields are: Name, LeaveDescription and Date.
The data with me is for each employee, for each date, leave codes are there.
I'm just getting into creating charts and one I'm working on could realy do with a prefix on its axis label, the symbol '£'.
I honestly have no idea how to do this and what syntax to use, can anyone help ?.
Also as the label could do with having a thousands seperator as well but as you can tell I'd have no idea how to do this either.
Thanks.
How is it possible to have the values on the chart x-axis to be shown vertically rather than horizantal?
Thanks
Hi!
In SSRS2005 I made an chart,
but on x-axis I only want date-part (if possible ISO-format yyyy-mm-dd).
The resulting chart shows date AND time-part. How to avoid this?
thanks.
Hi
I have a report where i am using line chart with date column for grouping.
For X axis i have choosen the "NUmeric or Timescale Values". In the Chart the dates are displayed in this format 1/1/2007 12:00:00 AM . I don't want Time part to be shown
If possible i want it to be shown as 1-Jan. The Chart should display Point even when there is no record returned from the query.
Say DATE Column
Date AMOUNT
1/1/2007 12:00:00 AM 10
1/3/2007 12:00:00 AM 20
1/4/2007 12:00:00 AM 30
Now the Chart should plot from 1/1/2007 to 1/4/2007 including 1/2/2007
Any help on this will be appreciated
Thanks
Smitha
Hi!
How can I format number on chart's y axis? I wanto to show 1.000 instead of 1000.
Thank you!
I have a pivot chart that displays 3 data series.Series 1 values range from 17 to 106.Series 2 values range from 1 to 18.Series 3 values range from 0 to 1.When I display all three series on the chart, the value axis labels run from1 to 120 with major unit lines at intervals of 20.When I remove Series 1, the chart automatically adjusts itself and thevalue axis labels run from 1 to 20 with lines at intervals of 2, thusnicely accommodating the value ranges of Series 1 and Series 2.All this is fine. But when I remove Series 2, leaving only Series 3,the labels run from 1 to 1.2 with interval spacing of .2. Since thesevalues are counts, it makes little sense to show decimal values.Can anyone provide advice on how to keep these axis labels fromshowing decimal values, if a user removes Series 1 and Series 2?Thanks.- Bob
View 2 Replies View RelatedI have a chart on a report that shows value in £ on the Y Axis. The values can be both positive and negative. I would like to have the negative labels to show in red and the positive in black. What is the expression syntax to achieve this? i know it will be an IIF statement, but what is the syntax to show the Y Axis label as <0?
eg if i was doing this for a field it would be iif(Field!Fieldname.value <0, "RED","BLACK") but what would i replace the FIELD!Fieldname.vaue with so the expression would change the Y Axis label.
Thanks in advance for any help
Dave Munro
Is changing the display format of the Y axis of a column chart supported in the Sept CTP or is it going to be supported in the official release? For example I have built a report model with the numeric sales values set as 'C' for currency and have created a simple bar chart with year on the category axis and sales on the Y axis. The problem is that the Y axis displays as a general number (10000000) and would like to display it as a currency ($10,000,000). I can't for the life of me figure out how to display the Y axis as currency in Report Builder.
View 2 Replies View RelatedI have a chart that I am grouping data by Year, Month, day then Hour (this is to view server performance data) - however i need the label for the hour grouping to be in the format of HH:MM and not H:M by using expression
=HOUR(Fields!Timestamp_perfmon.Value) &":"&MINUTE(Fields!Timestamp_perfmon.Value)
...but this as you would kind of expect returns 0-23:0-5 ie 18:1 whereas i need it to return 18:12 or 8:12 PM..
when i change the format code for the x-axis it unfortunatey screws up all my other group by values and labels..
can anyone help? Please....
Hi
please excuse my ignorance but if someone could point me in the right direction i would be grateful.
i have produce a chart with some data against date points on x axis. i have another date field which i want to combine with the orignal date axis is this possible .
ie
table
results planned date Acutual date
10 02/03/07 01/03/07
46 03/03/07 03/03/07
60 06/03/07 07/03/07
i want to combine the planned date and actual date as an x axis
thanks
I have a chart that I am grouping data by Year, Month, day then Hour (this is to view server performance data) - however i need the label for the hour grouping to be in the format of HH:MM and not H:M by using expression
=HOUR(Fields!Timestamp_perfmon.Value) &":"&MINUTE(Fields!Timestamp_perfmon.Value)
...but this as you would kind of expect returns 0-23:0-5 ie 18:1 whereas i need it to return 18:12 or 8:12 PM..
when i change the format code for the x-axis it unfortunatey screws up all my other group by values and labels..
can anyone help?
Hi,
I have a report based on a line chart.
The values on X-axis are scaled from -100 to +100. I want to colour the band from -100 to 0 with red colour and that from 0 to +100 in green colour, and i want to provide legend for these bands/sections. How can i do this?
A prompt response would be really appreciated
Thanks a lot!!
Simranjeev
What is the best optimised options to display the date labels with bi-weekly intervals starting date Date from one month to three months future from the current date?
As per above requirements, I have built the below line graph query and graph, currently it only displays the date labels as per data but I need to display date labels with bi-weekly intervals starting date from one month to three months future from the current date. Also another issue found, if there are few more date labels then does not show all labels on horizontal axis.
Select
/* Set Week End date as Sunday */
DATEADD(DAY, 7 - DATEPART(WEEKDAY, t.TaskBaseline0FinishDate), CAST(t.TaskBaseline0FinishDate
+1 AS DATE)) as[WeekEnd]
,count(t.TaskBaseline0FinishDate) as Baseline
,count(t.TaskFinishDate) as Finish
[Code] .....
I have requirement where i want to show my chart report data in Y axis...it is possible in SSRS 2008R2? or it is possible only in SSRS 2012 only?
View 7 Replies View Related
Hello,
I need to know what means are available to change the Minimum and Maximum Y-Axis scale values rather than leave them simply as they are in the properties.
Right now whatever min/max values I enter into the scale for the Y-Axis are unchangeable.
I need to be able to change the min/max scale values based on the value of the data at run time.
Any help is appreciated.
Thanks.
I have a bubble chart created with Report Builder 3.0. I have the Y-axis series is along the left side of the chart. When all X values are positive, everything displays normally. However, if any X-axis values are negative, the whole graph shifts slightly leftward and the Y-axis title is no longer visible. It seems to be overwritten by the shifted graph or simply pushed into nondisplay area.
Is there something I can do to make the chart stay put?
I have created range bar chart and I am not able to achieve the following tasks.
1. Change X-axis Label Format to Quarter:
I have x-axis with dates and y axis of project groups. I have changed x-axis interval type = month and interval=3.
 Â
Set the Maximum = Â Max(ProjectEndDate) and Minimum = Min(ProjectStartDate).
Now my chart showing 3 months x-axis interval dates in mm/dd/yyyy format. I want to change this interval date format to Quarter. The problem is LabelsFormat property is not recognize  the "=Q or q or quarter" and also not accepting the expressions. How can I achieve this?
2. Placing series side by side when it is not overlapping
I want to place the same group series side by side only when the previous project end date is less than next project start date, otherwise place the next project to next row. How can I achieve this?
All,
I have read through the following:
http://technet.microsoft.com/en-us/library/aa964128.aspx.
The relevant section of this document is :-
Question (X-axis): How does automatic x-axis label positioning work?
Answer: Currently, built-in Reporting Services charts only allow automatic positioning in order to avoid overlapping the x-axis labels. The label direction (horizontal/vertical) of the axis labels depends on the label string sizes and the available space. X-axis labels are either shown horizontally in one line, horizontally in multiple lines with line breaks, or vertically. Showing x-axis labels at an angle, or explicit manual control over individual x-axis label positions is currently not supported.
Note There are several third-party chart add-ins that enable more control over axis labels. These add-ins can be installed on top of Reporting Services 2005.
I have exactly the problem indicated above in that some sectors of my Pie Charts I am are trying to produce are small and are close together thus labels overlap in some cases. As it says above, only automatic placing of the labels is available, but there could be a solution through third party software.
Does anyone know of a 3rd party solution/add in or a workaround?
Thanks
Msuk
I have two fields ID and Log data and log data is a 96 character long string of numbers representing 15 minute intervals from midnight to midnight.
I need to convert these 96 characters to a full 1440 characters which would mean taking each of the 96 characters one by one and making 1 character into 15.
I had Vb macro to do the conversion but now it's broken and I can't fix it. Getting it done in SQL would solve a lot of problems.
I then go from the 1440 fields and do log analysis like total time doing a specific activity but my query is dependent on having all 1440 characters.
In SQL reporting, How do I add the formula in the Formula bar?All the data is coming from a sproc.
View 3 Replies View Related
Hello All,
I have a reporting services report in the form of a chart. I have two datafields on the chart.
I need to be able to dynamically hide one datafield and view the chart for the other one and vice versa.
How do I do this ?
Any help would be appreciated..
Thanks!
When I export the report in excel format the chart is displayed as picture. I want it to be displayed as editable chart.Does Office Writer work in this situation and did anyone use Office Writer to accomplish same type of problem.Is there any other method or product we can use instead of the office writer.
View 2 Replies View RelatedI have a report designed in SSRS 2008 R2.My issue is that the data labels do not stay outside the bars for high values.
View 4 Replies View RelatedI need to create a chart with the following features
1) Bar chart that has data for 3 years (3 series)
2) Line chart that has the same data as per the above points on the bar chart but this is a running total. (3 series)
3) These data points are for the 12 months
4) there should be a secondary axis for the cumulative one
Can I create this using the same data set?
Hi Guys..
i don't know weather is it possible or not..but Can any One tell's me How can i refresh the Chart Values.. acutally what's happening..
i have two Chart in a reprot .. One is Main Category and other one is SubCategory... acutally what i want.. in Main Category chart sum of Quantities of Subcategory values comes in bar or any other format.. and when i click on Main chart any bar it's refresh the other chart and return the result of subcategory under that main category in details...
i don't know is this possible .. acutally i m very new in reproting.. infact that's my first report.. so i want to do this.. if any article or any help anyone can provide me..
Thanks
Is that like some interval function for dates, like i want to group my data in intervals of 15 minutes and 30 minutes. Is there such a function in T-SQL
View 4 Replies View RelatedHello
Probably a very simple problem, but im stumped. I have a table which gives the start-time and end-time of an employees work day. I want to create a view which contains a line of data for each 5 minute period worked. Please help.