Check Last Table Transaction
Apr 11, 2008
i have large ssis package which is scheduled daily. The package uses a table on sql server as source and because the execution time is pretty long i just want to execute the whole package only if the data in the source table has changed since the last execution. unfortunatley in the source table there is no timestamp or something like that available. so i thougt about querying some logging information. is there a system table where the time of the last table transaction is stored?
View 7 Replies
ADVERTISEMENT
Aug 19, 2004
Hi,
i would like to know how to determine a transaction is already rollback so that we dont have to reroll back again and get an exception like below:
This SqlTransaction has completed;
it is no longer usable. at System.Data.SqlClient.SqlTransaction.Rollback()
Please help because when i tried to do this: objTrans.rollback() and i got the above exception.
Regards,
View 3 Replies
View Related
Aug 14, 2001
Previously I have posted about my problem with transaction logs. Threw my research I have found the truncate log at check point. I have also been lead to think that a check point could be a full back up. I have set this option to true and then performed a full back up. Afterward I have shrank the database to find the transaction log to still be over 43 gigs. Where have I gone astray?
Regards
SeTi_Ni
View 1 Replies
View Related
Apr 7, 2008
Our system is 24/7, ldf file disk space is 30 gb.
As per the advice given by somebody
i set ldf initial log size as 29 gb and restricted the growth and set the autogrowth to 500 mb
i did not run and shrink ldf command on daily basis. this is the advice given by another dba.
then he suggested to create a maintenance plan to check database integrity check. whick will
check the disk space threshold.
i did not understand how will the maintenance plan check the disk space and give an alert.
where should i check the alert for this maintenance plan. secondly how can i stop my database log file to deliver a message that my disk is full.
please suggest me a best method. where i am wrong , how should i handle the situation without the dba monitoring.
and our system has lot of batches running for every minute.
View 13 Replies
View Related
Jul 21, 2004
Hi, guys
I try to add some error check and transaction and rollback function on my insert stored procedure but I have an error "Error converting data type varchar to smalldatatime" if i don't use /*error check*/ code, everything went well and insert a row into contract table.
could you correct my code, if you know what is the problem?
thanks
My contract table DDL:
************************************************** ***
create table contract(
contractNum int identity(1,1) primary key,
contractDate smalldatetime not null,
tuition money not null,
studentId char(4) not null foreign key references student (studentId),
contactId int not null foreign key references contact (contactId)
);
My insert stored procedure is:
************************************************** *****
create proc sp_insert_new_contract
( @contractDate[smalldatetime],
@tuition [money],
@studentId[char](4),
@contactId[int])
as
if not exists (select studentid
from student
where studentid = @studentId)
begin
print 'studentid is not a valid id'
return -1
end
if not exists (select contactId
from contact
where contactId = @contactId)
begin
print 'contactid is not a valid id'
return -1
end
begin transaction
insert into contract
([contractDate],
[tuition],
[studentId],
[contactId])
values
(@contractDate,
@tuition,
@studentId,
@contactId)
/*Error Check */
if @@error !=0 or @@rowcount !=1
begin
rollback transaction
print ‘Insert is failed’
return -1
end
print ’New contract has been added’
commit transaction
return 0
go
View 1 Replies
View Related
Jul 6, 2014
Running Frequently Transaction logbackup during Integrinty check DB /optimization job will cause any issue /impact as duration will extend ...
View 2 Replies
View Related
Dec 20, 2007
can sql server do this ?
table 1 that check table 2 and adding missing dates
this my employee table
table 1
table Employee on work
------------------------
empid basedate shift
----------------------------
12345678 01/04/2007 1
12345678 02/04/2007 1
12345678 03/04/2007 1
12345678 04/04/2007 1
12345678 05/04/2007 1
12345678 06/04/2007 1
12345678 07/04/2007 1
12345678 08/04/2007 1
12345678 09/04/2007 1
12345678 10/04/2007 1
98765432 20/04/2007 1
98765432 21/04/2007 3
98765432 22/04/2007 3
98765432 23/04/2007 5
98765432 25/04/2007 4
98765432 26/04/2007 4
98765432 27/04/2007 4
98765432 28/04/2007 4
98765432 30/04/2007 4
-----------------------------------------------------------------------------------
and i need to see the missing dates lkie this
in table 2
------------------------------------------------------
table 2 (adding missing dates with zero 0)
table Employee_all_month
------------------------
empid basedate shift
----------------------------
12345678 01/04/2007 1
12345678 02/04/2007 1
12345678 03/04/2007 1
12345678 04/04/2007 1
12345678 05/04/2007 1
12345678 06/04/2007 1
12345678 07/04/2007 1
12345678 08/04/2007 1
12345678 09/04/2007 1
12345678 10/04/2007 1
12345678 11/04/2007 0
12345678 12/04/2007 0
12345678 13/04/2007 0
12345678 14/04/2007 0
12345678 15/04/2007 0
12345678 16/04/2007 0
12345678 17/04/2007 0
12345678 18/04/2007 0
12345678 19/04/2007 0
12345678 20/04/2007 0
.................................and adding missing dates with zero 0 until the end of the month
.................................
12345678 31/04/2007 0
98765432 01/04/2007 0
98765432 02/04/2007 0
98765432 03/04/2007 0
98765432 04/04/2007 0
98765432 05/04/2007 0
98765432 06/04/2007 0
98765432 07/04/2007 0
98765432 08/04/2007 0
98765432 09/04/2007 0
..............................and adding missing dates with zero 0 only whre no dates in this month
.......................
98765432 20/04/2007 1
98765432 21/04/2007 3
98765432 22/04/2007 3
98765432 23/04/2007 5
98765432 25/04/2007 4
98765432 26/04/2007 4
98765432 27/04/2007 4
98765432 28/04/2007 4
98765432 30/04/2007 4
TNX
View 4 Replies
View Related
May 31, 2008
Hi All
I'm getting this when executing the code below. Going from W2K/SQL2k SP4 to XP/SQL2k SP4 over a dial-up link.
If I take away the begin tran and commit it works, but of course, if one statement fails I want a rollback. I'm executing this from a Delphi app, but I get the same from Qry Analyser.
I've tried both with and without the Set XACT . . ., and also tried with Set Implicit_Transactions off.
set XACT_ABORT ON
Begin distributed Tran
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1 and DONE = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
COMMIT TRAN
It's got me stumped, so any ideas gratefully received.Thx
View 1 Replies
View Related
Sep 6, 2005
Hi,I have two databases called DB1 and DB2. DB1 has a table called table1 and DB2 has table2.I want to write one SP into the DB1, that SP will check whether table2 into the DB2 is exists or not, how do I do it? Any help?I know if it is into the same database then,IF EXISTS (SELECT * FROM dbo.sysobjects WHERE ID = object_id(N'[table2]') and OBJECTPROPERTY(ID, N'IsTable') = 1)-- then do some thingI tried replacing "dbo.sysobjects" with "DB2.dbo.sysobjects", but no luck.Any Help???
View 2 Replies
View Related
Oct 13, 2015
I am stuck in the following scenario.
Tbl_Loan
Trans_ID
Emp_ID
Guarantor_1_ID
Guarantor_1_ID
TRN_01
EMP_01
[code]....
View 5 Replies
View Related
Feb 22, 2007
I have a design a SSIS Package for ETL Process. In my package i have to read the data from the tables and then insert into the another table of same structure.
for reading the data i have write the Dynamic TSQL based on some condition and based on that it is using 25 different function to populate the data into different 25 column. Tsql returning correct data and is working fine in Enterprise manager. But in my SSIS package it show me time out ERROR.
I have increase and decrease the time to catch the error but it is still there i have tried to set 0 for commandout Properties.
if i'm using the 0 for commandtime out then i'm getting the Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
and
Failed to open a fastload rowset for "[dbo].[P@@#$%$%%%]". Check that the object exists in the database.
Please help me it's very urgent.
View 3 Replies
View Related
Jan 17, 2008
Hi all,I am in the process of creating a page that checks to see if a particular user exists in the database and if it does then send to welcome.aspx if not then accessdenied.aspx. The userid is requested from the query string.I have done some research and cannot find anything directly related, I have tried to add bits of code into what i think is the right place but I dont think what i am doing is correct. Can someone help and show me where my code is going wrong? Also is there a better/more efficient way to do what I am doing?Thanks in advance. default.aspx.csusing System;using System.Data;using System.Data.SqlClient;using System.Configuration;using System.Web;using System.Web.Security;using System.Web.UI;using System.Web.UI.WebControls;using System.Web.UI.WebControls.WebParts;using System.Web.UI.HtmlControls;public partial class _Default : System.Web.UI.Page{ protected void Page_Load(object sender, EventArgs e) { string UserID = Request.QueryString["uid"]; //string TransferPage; if (UserID != null) { //initiate connection to db SqlConnection objConnect = new SqlConnection(System.Configuration.ConfigurationManager.ConnectionStrings["MyConnection"].ConnectionString); string sql = "SELECT COUNT(*) FROM members WHERE UserID = '" + UserID + "'"; SqlCommand query = new SqlCommand(cmd, test); int count = (int)query.ExecuteScalar(); int aantal = -1; // some default value if can't insert record if (count == 0) // no existing record for username { Server.Transfer("accessdenied.aspx"); } else { Session["UID"] = UserID; Server.Transfer("welcome.aspx"); } } }}
View 7 Replies
View Related
Apr 1, 2008
Hi,I want to check that Is there row exists in table or not.Please correct me. Dim conn As SqlConnection Dim comm As SqlCommand Dim reader As SqlDataReader Dim connstring As String connstring = ConfigurationManager.ConnectionStrings("iharyana").ConnectionString conn = New SqlConnection(connstring) comm = New SqlCommand("select * from test where username=@username", conn) comm.Parameters.Add("@username", Data.SqlDbType.VarChar, 20) comm.Parameters("@username").Value = uname conn.Open() reader = comm.ExecuteReader While reader.Read If reader.Item("username").ToString = "" Then Response.Redirect("http://www.iharyana.com") End If End While reader.Close() conn.Close()
View 1 Replies
View Related
Jul 9, 2004
Hi...
Is there any way to check previous row in SQL Query?
I have a table with these column :
Name1
Name2
Audit_Time (datetime)
Changes
I want to delete record from database in which the Audit_time is <'01/05/2004'.
However before deletion, I want to check, if the Changes value is 'OLD' And the previous value is 'NEW', I will check the Audit_time of the NEW instead of OLD.
Table :
Row Name1 Name2 Audit_Time(mm/dd/yyyy) Changes
1 ABCD EFGH '01/01/2004' ADD
2 ABCD EFGHIJ '01/04/2004' NEW
3 ABCD EFGH '01/04/2004' OLD
4 Klarinda Rahmat '02/08/2004' NEW
5 Klarinda Rahmat '01/04/2004' OLD
In this case, I want to delete row 1,2,3 Where the audit_time are < '01/05/2004'.
Row 5 the audit_time also < '01/05/2004', however the changes='OLD' and the previous value changes='NEW', so I will check the Audit_Time of row 4 which is not < '01/05/2004'.
So I can't delete row5.
Is there any way to check previous row or the row before a specific row in SQL.
Any suggestion is welcomed.
Thank you in advanced.
View 2 Replies
View Related
Sep 12, 2006
Hi,
Could someone shed some light on the best way to check a table recordcount before run of DTS pkg.
We have a table that is populated in MS SQL from an Oracle database, and the contents of that table are the basis of a DTS package that we run.
Sometimes Oracle transfer bombs out and the table is empty but our process runs anyway. It screws everything up.
Can we check the recordcount of a table on the server, and if the recordcount > 1 then the process runs, if not, then the process aborts?
Thanks,
Dominic
View 1 Replies
View Related
Dec 17, 2004
Hello, everyone:
I got a new database from client. How to check which tables are seed table and truncatable? Thanks
ZYT
View 1 Replies
View Related
Feb 3, 2004
Hi - please excuse my newness to this. I have a database with several tables and one of them is causing my application to lag really bad. I figure there is either not enough space or something is just wrong in general and i don't know what. Does SQL Server have a shortcut or easy way to test a table in the database?
Thanks =)
View 6 Replies
View Related
May 20, 2008
Hi,
This my first time using the link server to read the files directly from within SQL2005, so issues the following link:-
EXEC sp_addlinkedserver
@server = N'MYVFPSERVER', -- Your linked server name here
@srvproduct=N'Visual FoxPro 9', -- can be anything
@provider=N'VFPOLEDB',
@datasrc=N'"C:PROGRAM FILESMICROSOFT VISUAL FOXPRO 9Samplesdata estdata.dbc"'
After that i can open query and do the import issues, but how can check if the table exists before issues the query.
Best regards
View 2 Replies
View Related
Mar 20, 2006
Hi,
I can check the existency of the attribute in particular table. But is it possible for me to check whther my table is exist or not in that particular database?
I am using JSP
Please help!
thank you
View 2 Replies
View Related
Nov 15, 2006
Hi,
i wanna know how can i check a table has datas inside, because i wanna use delete from table and if table is empty i dont wanna run this statement.
thanks in advance
View 5 Replies
View Related
Jul 13, 2006
Hello, there,I am trying to find out if a table is used by any of the storedprocedures or functions.I can generate all the scripts and look for it. But is there an easyway?THXJohn
View 4 Replies
View Related
Feb 7, 2008
Hi SQL Professionals ,
I have a requirement like this,
I have a Live Database as well as the Test database with the same Definition
now i need to write a SQL to check identity of these two database tables,
i mean i need to check if the Test Database has got the Same Table definition as Live Database table definition ?
In the same way how do i check for the Stored peocedures ?
how do i write a SQL for this ?
regardssuis
View 4 Replies
View Related
Oct 27, 2007
Hi all!
I need to check data changes in some tables from specified date. Can it be done without triggers for each table?
SQL Server Management Studio always says "Data was changed" if another user updates data and you try to update old version. How it checks data modification date? I found only this:
USE [ScheduleDB]
GO
SELECT * FROM sys.objects WHERE object_id = OBJECT_ID('[dbo].[TTest]') AND type in ('U')
but it can only show structure modification date.
View 3 Replies
View Related
Feb 6, 2007
I am getting this error :Distributed transaction completed. Either enlist this session in a new
transaction or the NULL transaction. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.OleDb.OleDbException: Distributed transaction completed. Either
enlist this session in a new transaction or the NULL transaction.have anybody idea?!
View 1 Replies
View Related
Dec 22, 2006
i have a sequence container in my my sequence container i have a script task for drop the existing tables. This seq. container connected to another seq. container. all these are in for each loop container when i run the package it's work fine for 1st looop but it gives me error for second execution.
Message is like this:
Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
View 8 Replies
View Related
Jan 8, 2008
Hi,
i am getting this error "Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.".
my transations have been done using LINKED SERVER. when i manually call the store procedure from Server 1 it works but when i call it through Service broker it dosen't work and gives me this error.
Thanks in advance.
View 2 Replies
View Related
Sep 14, 2006
What’s the easiest way to check if a single value exists in a table column? I’m building a simple login page, and I want to get the username and check if it exists in my Users table. Here’s my SQL: SELECT UserID FROM UsersWHERE UserID = "admin" Could someone give me code to check for “admin” in my UserID column? Here’s some code I tried, using my SqlDataSource, but it returns an error “Could not load type 'System.Data.OleDb'” protected void Button1_Click(object sender, EventArgs e) { // Retreive the results from the SqlDataSource as a DataReader OleDbDataReader reader = (OleDbDataReader) SqlDataSource1.Select(DataSourceSelectArguments.Empty); // Read in the value if (reader.Read()) { } // Close the reader reader.Close(); } I don’t have to use the SqlDataSource, but originally thought it might be easier. I know how to use SqlDataSource to fill a whole GridView but this is different.
View 2 Replies
View Related
Jun 17, 2008
Basically, i am still relatively new to ASP.net and SQL. And i have the following query.
I have a skills table to which the user enters their skills using the following fields: Skillcatagory, SKill, Current Level, Target Level, target date and comments and the serial of the user.
I need to check via our staff table, which people have had a skill entered for them. And then produce a report on who has not had a skill entered for them.
This table has a serial of the user column aswell which is unique.
If there is more information that i can give you to assist me, please ask me.
You help would be greatly appreciated.
View 4 Replies
View Related
Jan 30, 2006
Hi..
I got 10 Tables with data in it for 100 Loans. The data can be Good and Bad .....
I had a Update Proc which Updates the 10 tables with the Good data what ever i pass...for this 100 Loans
Tha Proc will update the existing data in all tables whether it is Good or Bad Data.
when the updating is completed I want to know what are the Loans that were updated where there is a Bad Data in atleast one Field of the 10tables.
I don't want to check field by field in each table.... if there is a bad data and my proc updated with a Good Data i want to know that Loan.
Can any one has an idea on this,,,,
Thanks
Bob
View 2 Replies
View Related
Sep 10, 2004
Within the execution of a t-sql script how do I check for the existance of a temporary table associated with the session or a global temporary table?
My understanding is that the table name doesn't get placed in the current database sysobjects table - it goes into tempdb. But the object name is cryptic (so as to be unique) and I see no way of associating it with the current session (@@SPID).
Thanks,
Fred
View 4 Replies
View Related
May 19, 2013
I have a question about a table with triggers or maybe a check constraint.I have the following create tables:
create table bid(
seller char(10) not null,
item_nummer numeric(3) not null,
)
create table Item(
startprice char(5) not null,
description char(22) not null,
start_date char(10) not null,
end_date char(10) not null,
seller char(10) not null,
item_nummer numeric(3) not null,
)
What i'm trying to make is this trigger/constraint: colomn "seller" from table Item will get NULL as long as systemdate is > start_date and end_date, then it will get the value from seller from table bid on the same item_nummer in both table).
View 9 Replies
View Related
Apr 10, 2008
Hi there,
I want to create an SQL Function that checks if a table exists and returns true or false. I will pass this function a paramter (say @COMPANYID) e.g.
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[tblmyTableName_' + @COMPANYID) and OBJECTPROPERTY(id, N'IsUserTable') = 1)
how would I write this so the query is dynamically executed and I can get a value of true or false back?
View 4 Replies
View Related
May 9, 2008
hello everybody,
i have one problem, I want to check the database table modified or not for every five minutes , how can check? please help me
Senthil
View 2 Replies
View Related
