Check Numeric Data Type In SSIS
Sep 3, 2007
Dear All,
the situation is that i have a column data comes from flat file and all i want to do is to check that the incoming column is numeric(12,3) and if the incoming data exceed that size "12,3" exception or redirect the row is happened.
the problem that i try to apply that with the data conversion or Derived column component but it in case of the scale of the incoming data exceed 3 the component trim until 3 scale.
i also try to perform it with the flat file data source component but i face a problem that if the data in the column is empty then flat file data source component read the numeric column as Zero
i hope someone help me coz i need to handle it soon.
best wishes
Maylo
View 5 Replies
ADVERTISEMENT
Mar 7, 2007
We have some columns in a table where the date is stored as 19980101 (YYYYMMDD). The data type for this column is NUMBER(8) in Oracle.
I need to copy rows from Oracle to SQL Server using SSIS. I used the Data Conversion transformation editor to change it to DT_DATE, but the rows are not being inserted to the destination.
On Error, If I fail the component, then the error is :
There was an error with input column "ORDER_DATE_CONV" (1191) on input "OLE DB Destination Input" (29). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
Regards
RH
View 3 Replies
View Related
Oct 11, 2007
We have an SSIS package that reads in a tab delimited file and throughs the data into a SQL Server 2005 table. The package worked fine on the test files but when we recieved the production files we are getting the error message:
Invalid data for type "numeric".
Needless to say this is not very discriptive. I ran a trace on the DB durning the call and its doing a bulk insert
BULK INSERT [dbo].[FNIAllAppData]
FROM 'GlobalDTSQLIMPORT 00000000000015b800000000009fbd88'
WITH (DATAFILETYPE = 'DTS_Buffers', CODEPAGE = 'RAW', CHECK_CONSTRAINTS, TABLOCK)
When I changed the Data Flow Destination off to OLE DB Destination the error does not occure and all records are loaded successfully.
Any suggestions or help would be appreciated. Thanks.
View 3 Replies
View Related
Jun 10, 2014
when I run below query I got Error of Arithmetic overflow error converting numeric to data type numeric
declare @a numeric(16,4)
set @a=99362600999900.0000
The 99362600999900 value before numeric is 14 and variable that i declared is of 16 length. Then why this error is coming ? When I set Length 18 then error removed.
View 2 Replies
View Related
Mar 21, 2006
Guys
I'm getting the above when trying to populate a variable. The values in question are :
@N = 21
@SumXY = -1303765191530058.2251000000
@SumXSumY = -5338556963168643.7875000000
When I run, SELECT (@N * @SumXY) - (@SumXSumY * @SumXSumY) in QA I get the result OK which is -28500190448996439680147097583285.072256 ie 32 places to left of decimal and 6 to the right
When I try the following ie to populate a variable with that value I get the error -
SELECT R2Top = (@N * @SumXY) - (@SumXSumY * @SumXSumY)@R2Top is NUMERIC (38, 10)
Any ideas ??
View 6 Replies
View Related
Jul 20, 2005
Hi,I would like to convert a dollar amount ($1,500) to represent Fifteenhundred dollars and 00/100 cents only for SQL reporting purposes. Isthis possible and can I incorporate the statement into an existingleft outer join query.Thanks in advance,Gavin
View 1 Replies
View Related
Oct 19, 2000
using this syntax numeric() can someone pls help me with the syntax to create a numeric column with a scale of 6 thanks
View 2 Replies
View Related
Aug 31, 2004
Hi There,
I'm using C# to get a value for a DOUBLE precision variable, called "Length", from a textBox using the following line:
Length = Convert.ToDouble( txtLength.Text )
I'm also using the following lines to prepare my stored procedure call:
arParms[9] = new SqlParameter("@Length", SqlDbType.Decimal, 5);
arParms[9].Value = record.Length;
My stored procedure has the following parameter definition:
@Length decimal(9,3)
My problem is that if someone types a value bigger than 999999 in the textbox he will get for sure the following error:
System.Data.SqlClient.SqlException: Error converting data type numeric to decimal.
I don't know how to either make sql or C# to truncate the value or catch the exception to automatically assign 0 to the parameter.
Please Help.
Moshe
View 1 Replies
View Related
Jul 12, 2000
I would like to know how to translate a numeric value = 3 to a text or char value = 03.
Any input would be appreciated.
Thanks,
Joel
View 1 Replies
View Related
Feb 2, 2013
when i execute my store procedure it give this error.
USE [CWMNEW]
GO
DECLARE@return_value int
EXEC@return_value = [dbo].[BOQ]
SELECT'Return Value' = @return_value
GO
[code]....
View 1 Replies
View Related
Sep 20, 2007
Hi! Every one,
I need to increase my numeric digit in a table.previous column name was "Amount",Precision=18 and scale=6, when I increase Precision=28 it show "Airthmatec Error",
even when increase precision in a new table it work properly.
Thanks.
View 1 Replies
View Related
May 11, 2005
Hi all,
I wanna know about, r Sql Server 2000 support the Booleon data type, if yes plz tell how can it use...
and also tell about some common Data type.
Thanx in advance
Sajjad
View 3 Replies
View Related
Dec 10, 2014
I have a sql code that I am having some difficulty with. All I'm trying to do is get each department and sum the amount by month based on the date in the table. I am getting "error converting data type varchar to numeric".
Code:
select DEPARTMENT,
CASE
WHEN ((DATE >= '06/01/2014') AND (DATE <= '06/30/2014')) THEN (cast(sum(Amount) as decimal(10,2)))
ELSE '' END AS 'JUNE',
CASE
WHEN ((DATE >= '07/01/2014') AND (DATE <= '07/30/2014')) THEN (cast(sum(Amount) as decimal(10,2)))
ELSE '' END AS 'JULY'
from L27_PHAROS_DETAIL_DATA
WHERE Department = 'TECHNOLOGY SERVICES'
GROUP BY DEPARTMENT, DATE
ORDER BY DEPARTMENT
View 5 Replies
View Related
Jun 13, 2008
Hi Group:
I try to JOin to tables: Enterprise has a decimal(5,3) and COHIER has varchar 5. All I am getting is an error on converting data. How can I fix this problem.
SELECT a.Security_Value, b.Enterprise_Number, b.Enterprise_Description
FROM dbo.COHIER a INNER JOIN
dbo.Enterprise b ON a.Security_Value = b.Enterprise_Number
Thanks!!!!!!
View 6 Replies
View Related
Dec 12, 2014
I am using MS SQL Server 2008R2 along with VB 2010.The first question is: why is it even trying to convert anything to numeric? I have NO numeric data types. And I don't have any nvarchar data types either. I'm very confused.Doesn't nchar include any and all characters, in any combination? Should I change everything to text data type? Maybe something else? Some values are going to be blank. The Lab/Source Lots have numbers, letters and dashes.
My stored procedure:
ALTER PROCEDURE dbo.MChemsInsert
(
@LabLot nchar(10),
@Chem nchar(50),
@Source nchar(50),
@SourceLot nchar(10),
[code]....
View 2 Replies
View Related
Feb 14, 2007
Select SchoolNumber + ' ' + ShortSchoolName as SchoolList from tblSchoolsSubset
This is my simple sql statement which generates the error in the subject line.
SchoolNumber is type numeric and ShortSchoolName is nvarchar
There are only numbers in SchoolNumber.
View 2 Replies
View Related
Feb 26, 2007
Yes again a topic like this, I couldn't get an answer for my problem so I started a new topic.
Im getting this error for these lines:
$registreer = "INSERT INTO Gebruikerstelefoon (gebruikersnaam, telefoonnummer, volgnr) VALUES ('".$_SESSION['gebruikersnaam']."', '".$_POST["telefoonnummer"]."', '')";
mssql_query($registreer) or die("Fout bij toewijzen telefoonnummer.");
'telefoonnummer' (phonenumber) is nummeric, users can insert their phonenumber in a input field (text) and register along.. ( this is a second query for the column phonennumber) though this doesn't work..
View 3 Replies
View Related
Mar 20, 2007
Hi guys,
Been a while, also tried doing a search but no go.
Im getting this error in sql analyser:
Server: Msg 8114, Level 16, State 5, Line 1
Error converting data type varchar to numeric
Both queries work fine individually, im trying to append them together, with column columns as below:
SELECT PERIOD.STARTDATE,
PERIOD.DESCRIPTION,
COMMISSION_TXN.PERIODSEQ,
COMMISSION_TXN.SUPER_DISTRIBUTOR_CODE,
COMMISSION_TXN.PREMISE_CODE,
COMMISSION_TXN.DISTRIBUTOR_CODE,
COMMISSION_TXN.INTERNAL_EXTERNAL,
COMMISSION_TXN.SERVICE_ID,
COMMISSION_TXN.ACCOUNT_NUMBER,
COMMISSION_TXN.PROMOTION_CODE,
COMMISSION_TXN.PRODUCTDESCRIPTION,
COMMISSION_TXN.PRODUCTID,
COMMISSION_TXN.PROMOTION_NAME,
COMMISSION_TXN.EVENTTYPEID,
COMMISSION_TXN.MEASUREMENT_NAME,
Mobile_revenue = ('No Mobile revenue for txn level'),
COMMISSION_TXN.COMMISSION_AMOUNT,
product_id = ('No product id for txn level')
FROM COMMISSION_TXN INNER JOIN
PERIOD ON COMMISSION_TXN.PERIODSEQ = PERIOD.PERIODSEQ
union all
SELECT DISTINCT
PERIOD.STARTDATE,
PERIOD.DESCRIPTION,
TC_Mobile_Usage.PERIODSEQ,
Dealer_Hierarchy.SUPER_DISTRIBUTOR_CODE,
TC_Mobile_Usage.GENERICATTRIBUTE1 AS Dealer_premise_code,
Dealer_Hierarchy.DISTRIBUTOR_CODE,
internal_external = ('External'),
TC_Mobile_Usage.GENERICATTRIBUTE2 AS Service_Id,
account_number = ('none for txn file'),
promotion_code = ('Usage'),
Product_description = ('Usage'),
Product_id = ('Usage'),
promotion_name = ('Usage'),
TC_Mobile_Usage.EVENTTYPEID,
measurement_name = ('Usage'),
sum(TC_Mobile_Usage.VT_VALUE) AS Mobile_revenue,
sum(TC_Mobile_Usage.CONTRIBUTIONVALUE) AS Commission_Amount,
TC_Mobile_Usage.PRODUCTID
FROM TC_Mobile_Usage INNER JOIN
PERIOD ON TC_Mobile_Usage.PERIODSEQ = PERIOD.PERIODSEQ INNER JOIN
Dealer_Hierarchy ON TC_Mobile_Usage.GENERICATTRIBUTE1 = Dealer_Hierarchy.PARTICIPANTID
WHERE (NOT (TC_Mobile_Usage.PRODUCTID = 'iddv')) AND (NOT (Dealer_Hierarchy.POSITIONTYPEID LIKE 'MI %')) AND
(TC_Mobile_Usage.PERIODSEQ IN (107))--, 108, 110, 111, 112, 114))
group by PERIOD.STARTDATE,
PERIOD.DESCRIPTION,
TC_Mobile_Usage.PERIODSEQ,
Dealer_Hierarchy.SUPER_DISTRIBUTOR_CODE,
TC_Mobile_Usage.GENERICATTRIBUTE1,
Dealer_Hierarchy.DISTRIBUTOR_CODE,
TC_Mobile_Usage.GENERICATTRIBUTE2,
TC_Mobile_Usage.EVENTTYPEID,
TC_Mobile_Usage.PRODUCTID
Any suggestion on how to fix it?
Champinco
View 1 Replies
View Related
Apr 12, 2007
I'm reading the MS Training Kit for SQL 2005 Admin, Exam 70-431, (no debating certs, please), and I come across this gem, discussing numeric data types such as bigint, int, smallint, decimal, numeric, etc...
"The storage is also precisely defined, so any data stored in these data types returns and calculates to the same value on either an Intel or an AMD processor and architecture."
So exactly how precise would you have to be to notice a difference between architectures?
View 2 Replies
View Related
Jun 27, 2007
Hi
Please help me out
declare @CID numeric(3,0)
set @CID = 121
SELECT *
from Table_name
where ID Like ''''+@CID+'%'''
I am getting error like
Msg 8114, Level 16, State 5, Line 3
Error converting data type varchar to numeric.
T.I.A
View 5 Replies
View Related
Oct 5, 2007
I am having difficulty with my sql and I am not sure what do to. I am new to this. Any help you can give would be helpful.
Here is the statement that is giving me trouble. If I take this out of my Sql query everything runs fine.
CASE clm_att1
WHEN 'NG' THEN (clm_sppo)*(clio_fee04/100)
WHEN 'NA' THEN '0.00'
WHEN 'AF' THEN (clm_sppo)*(clio_fee04/100)*.65
ELSE ''
END as AccessFeeFinal,
Below is my full query.
SELECT
--clms_sku,
--clms_line,
--clm_prod,
clio_type,
clm.clm_id1,
clm.clm_rcvd,
CLM_DOUT,
clm_wkpct,
clm.clm_1a,
clm.clm_12a,
clm.clm_12b,
clm.clm_55d,
clm.clm_clir,
clm.clm_65a,
clm.clm_medb2,
clm.clm_tchg,
clm.clm_base,
clm.clm_stades,
clm.clm_meda4,
CLM_H30 =
Case
When CLM_H30 = 0.00 Then clm_sppo
else clm_H30
End,
clm_prod =
CASE
WHEN CLMS_sku = 'NEGO' THEN 'NEG'
WHEN CLMS_sku = '% OF CHGS' THEN 'NEG'
ELSE clm_prod
End,
"clm_nego" =
CASE
WHEN CLM_ATT1 = 'NA' THEN 0.00
WHEN CLM_ATT2 = 'NA' THEN 0.00
WHEN CLM_ATT3 = 'NA' THEN 0.00
WHEN CLM_ATT4 = 'NA' THEN 0.00
ELSE clm_nego
END,
"clm_sppo" =
CASE
WHEN CLM_ATT1 = 'NA' THEN 0.00
WHEN CLM_ATT2 = 'NA' THEN 0.00
WHEN CLM_ATT3 = 'NA' THEN 0.00
WHEN CLM_ATT4 = 'NA' THEN 0.00
ELSE clm_sppo
END,
clm_1e,
clm.CLM_ATT1 as Note,
CASE clm_att1
WHEN 'NG' THEN (clm_sppo)*(clio_fee04/100)
WHEN 'NA' THEN '0.00'
WHEN 'AF' THEN (clm_sppo)*(clio_fee04/100)*.65
ELSE ''
END as AccessFeeFinal,
CLM_ATT2,
CLM_ATT3,
clio_fee04 as "ACCESSFEEIMPACT",
"(clm_sppo/CLM_TCHG) * 100" =
CASE
WHEN CLM_ATT1 = 'NA' THEN 0.00
WHEN CLM_ATT2 = 'NA' THEN 0.00
WHEN CLM_ATT3 = 'NA' THEN 0.00
WHEN CLM_ATT4 = 'NA' THEN 0.00
ELSE (clm_sppo/CLM_TCHG) * 100
END,
clio_wrk1 as MAS90#
FROM dbo.clm clm Join
dbo.cli cli ON clm.clm_clir = cli.cli_id1 JOIN
dbo.clip clip ON cli.cli_id1 = clip.clip_id1 JOIN
dbo.clio clio ON cli.cli_id1 = clio.clio_id1
INNER JOIN dbo.clms clms ON clms.clms_id = clm.clm_id1
WHERE
(clip.clip_prd IN ('NEG', 'ADV')) AND
(clm_prod = 'ADV' OR clms_sku = 'NEGO' OR clms_sku = '% OF CHGS')AND
(CLM_STADES IN ('DONE','DUPO','DUPL'))and
clm_adjto = '' AND CLM_TCHG > 0. and
(clio.clio_type = 'AC')
View 4 Replies
View Related
Oct 17, 2007
I am having problems with a statment that I am writing.
The prop_uac is a alpha field and prop_disc is a numeric field. What I was trying to do is when the alpha field is not populated automatically pull from the numeric field. Then I wanted to put all of the results into one column. Can this be done? below is my statement. I hope you can help me.
Prop_uac =
CASE
WHEN prop_uac = '' THEN prop_disc
else prop_uac
End
View 2 Replies
View Related
Mar 24, 2008
hello everyone... i have some problem to with my trigger.. after execute the trigger.. i got this errro "Msg 8114, Level 16, State 5, Procedure trg_InsertPVReadingMeter, Line 14
Error converting data type varchar to numeric."
below is my command sql table PVReadingMeter
quote:USE [PVMC Database]
GO
/****** Object: Table [dbo].[PVReadingMeter] Script Date: 03/25/2008 01:18:06 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[PVReadingMeter](
[PV_reading_id] [uniqueidentifier] NOT NULL CONSTRAINT [DF_PVReadingMeter_PV_reading_id] DEFAULT (newid()),
[PV_reading_date_time] [datetime] NOT NULL,
[PV_reading_meter] [decimal](8, 2) NOT NULL,
[PV_normalized_monthly_yield] [float] NOT NULL,
[PV_normalized_monthly_energy_yield] [float] NOT NULL,
[PV_application_id] [uniqueidentifier] NOT NULL CONSTRAINT [DF_PVReadingMeter_PV_application_id] DEFAULT (newid()),
CONSTRAINT [PK_PVReadingMeter] PRIMARY KEY CLUSTERED
(
[PV_reading_id] ASC
)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY]
GO
USE [PVMC Database]
GO
ALTER TABLE [dbo].[PVReadingMeter] WITH CHECK ADD CONSTRAINT [FK_PVReadingMeter_Photovoltaic] FOREIGN KEY([PV_application_id])
REFERENCES [dbo].[Photovoltaic] ([PV_application_id])
ON UPDATE CASCADE
ON DELETE CASCADE
below is my trigger
quote:set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
CREATE Trigger [trg_InsertPVReadingMeter]
on [dbo].[PVReadingMeter]
for insert
as
begin
DECLARE @PVReadingMeter VARCHAR(100)
DECLARE @PVNormalizedMonthlyYield VARCHAR(100)
SELECT @PVReadingMeter = (SELECT PV_reading_meter + '' FROM Inserted)
SELECT @PVNormalizedMonthlyYield = (SELECT PV_normalized_monthly_yield + '' FROM Inserted)
-- Print the name of the new author
PRINT 'The new photovoltaic reading meter"' + @PVReadingMeter +'" is added.'
PRINT 'The photovoltaic normalized monthly yield is "' + @PVNormalizedMonthlyYield +'"'
end;
now, this is command to insert the values into PVReadingMeter table using trigger that has been created....
quote:insert into PVReadingMeter (PV_reading_date_time, PV_reading_meter, PV_normalized_monthly_yield,
PV_normalized_monthly_energy_yield, PV_application_id)
values (getDate(), 1.1, 4234.33, 43.44, '3D23C4FE-F6FC-475E-8CEC-23FE4E738EB9')
so, i got this error... Msg 8114, Level 16, State 5, Procedure trg_InsertPVReadingMeter, Line 14
Error converting data type varchar to numeric.
what should i do???
View 2 Replies
View Related
Mar 28, 2008
im trying to convert this Code from Varchar to Numeric(CAST(ISNULL(del.[Day 60 AMT],0) AS NUMERIC(6,3))+ CAST(ISNULL(del.[Day 90 AMT],0) AS NUMERIC(6,3)) + CAST(ISNULL(del.[Day 120 AMT],0)AS NUMERIC(6,3)) + CAST(ISNULL(del.[Day 150 AMT],0)AS NUMERIC(6,3)) + CAST(ISNULL(del.[Day 180 AMT],0)AS NUMERIC(6,3)) + CAST(ISNULL(del.[Day 210+ AMT],0)AS NUMERIC(6,3))) > 0
i got an error please help.
View 4 Replies
View Related
Sep 25, 2007
DECLARE @ENTITY nvarchar (100)
set @ENTITY = 'AccidentDimension'
DECLARE @FIELD nvarchar (100)
set @FIELD = 'JurisdictionState'
DECLARE @KEYID nvarchar (100)
SET @KEYID = '1234567890'
DECLARE @VALUE nvarchar (100)
SET @VALUE = 'WI'
DECLARE @WC_TABLE NVARCHAR(100)
SET @WC_TABLE = 'WorkingCopyAdd' + @ENTITY
DECLARE @SQL1 NVARCHAR (1000)
SET @SQL1 = 'INSERT INTO ' + @WC_TABLE+ ' (Claim, '+ @Field +') VALUES ('''+ @KEYID +''', '''+@VALUE+''')'
EXECUTE sp_executesql @SQL1
Can somebody help me. I get this error:
Error converting data type varchar to numeric.
while executing this Dynamic TSQl Command
View 15 Replies
View Related
Sep 4, 2007
how to pass the column that has a numeric(12,0) data type to user variable in SSIS? what kind of variable data type should I choose?
if i select int64, it keep giving me an error:
Error: 0xC001F009 at Row by Row process: The type of the value being assigned to variable "User:bject_Key" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
there is no numeric data type in variable..
if you click the drop down box in variable data type, you can only see the below data type:
Int32
int64
Object
Sbyte
single
string
uint32
uint64
boolean
byte
char
View 3 Replies
View Related
Aug 13, 2007
Hi,
Thank you in advance for your comments/suggestions. I am trying to create a View of a Table. The table is created by another application so I am unable to recreate it they way I want, also the data that is in the columns that I want to CAST are "numbers" not letters and will only be numbers. In the view I need certain columns to be CAST as numeric from varchar.
Here is the syntax that I am currently using:
Code Snippet
SELECT CAST(szF1 AS datetime) AS [Login Date/Time], szF2 AS [User Name], CAST(szF3 AS numeric) AS [Documents Indexed], CAST(szF4 AS datetime) AS [Logout Date/Time], CAST(szF5 AS numeric) AS [Documents Sent to QC], CAST(szF6 AS numeric) AS [Documents Reconciled], szF7 AS [Reject Reason], CAST(szF8 AS datetime) AS [Report Date]
FROM dbo.F_Report_Data AS a
WHERE (szF3 <> 'Blank')
When I open the view I get the error message about converting varchar to numeric.
Thanks,
Erik
View 16 Replies
View Related
Feb 3, 2005
I have always programmed my ASP pages with MS Access DB's and we recently got a SQL Server 2000. So, I'm totally new to SQL Server 2000.
I trying to retrieve data from a table in SQL, based on values from two input fields (text fields) on a form in the web page.
To process the form, I am using the following syntax:
Set oRs = oConn.Execute("SELECT BBILNAM, BTWP, BTXP, BPARCEL, BBILADD, BBILCTYST, BBILZIP5 FROM TESTdb WHERE BTWP = 'TWP' AND BPARCEL = 'PARCEL'")
SQL Fields in Table TESTdb are (BTWP = numeric field) and (BPARCEL = text field)
I realize that the problem is that I'm comparing a numeric field in my table, to a text field from my form, but don't know how to convert the text field to a numeric field, prior to the execution of the select statement. I'm hoping someone can point me in the right direction. Thanks!
View 2 Replies
View Related
Sep 4, 2012
This is the error in my query:
[Err] 22003 - [SQL Server] Arithmetic overflow error converting numeric to data type numeric.
If tried [%TAX] DECIMAL (10, 2) I have the correct output, but I need 4 decimal in my output.
Code:
MATNUMB-VER-EXENUMB-VER-RIC%TAX
a476427228.1515,17%
b9241314323.1515,50%
c7781510878.1413,98%
d7480019601.2626,20%
e877618297.099,45%
[Code] .....
View 2 Replies
View Related
Nov 17, 2015
Below is garbage data and structure (I think enough to get point across). How can I perform calculations needed?
Create Table #1234
(
abcd decimal(16,4)
,defg decimal(16,4)
,hijk decimal(16,4)
,logon datetime
,logoff datetime
[code]....
View 2 Replies
View Related
Aug 28, 2012
Here's the SP
Code:
USE [byrndb]
GO
/****** Object: StoredProcedure [dbo].[sp_GetLikeJobsByJobNumber] Script Date: 08/28/2012 15:17:28 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
[Code] ....
Why when I run
Code:
USE [byrndb]
GO
DECLARE@return_value int
EXEC@return_value = [dbo].[sp_GetLikeJobsByJobNumber]
@number = N'23913'
SELECT'Return Value' = @return_value
GO
Am I getting an "Msg 8114, Level 16, State 5, Procedure sp_GetLikeJobsByJobNumber, Line 16
Error converting data type varchar to numeric." error? Line 16 is "@number varchar = null"
View 5 Replies
View Related
Jun 17, 2015
As per my requirment using below script to convert from varchar to numeric.
declare @stg varchar(50)
set @stg='12,000,00'
select CONVERT(NUMERIC(17,2),@stg)
Getting error : Error converting data type varchar to numeric
View 6 Replies
View Related
