Hi All,
Is it possible to check the local system date format and then change the format to another format using SQL command in VB.
Eg.
-check current system format dd/MM/yyyy
-change current system format to MM/dd/yyyy format
Thanks
Jam.
I load data from excel and sometimes I have problem with format of excel's cells. For example format of cell should be "general" but one of cell is "custom" and I get wrong data but if I just change format in excel to "general" - data is correct.
Can I change or check format of cells in SSIS ?
Is it possible to check if the date has been formatted as dd/mm/yyyy i.e. something like this...
if (@EnterDate <> dd/mm/yyyyy )
SET @message = 'date not in the correct format'
Hi, I have this query string:
SELECT distinct [KioskID], MAX([ServerDate])FROM [report].[dbo].[tbKiosksLog]Where kioskid like 'ids%' group by kioskid
order by kioskid
I'm using Ms SQL Server 2000 Enterprise Edition.
After I've process a OLAP cube, for the dimension with the data type DateTime, the date format will come out as YYYY/MM/DD hh:mm:ss.
How do I change that date format to just DD/MM/YYYY?
want to insert a format date "dd/MM/yy" into a MS SQL table, But the fields default format is American "MM/dd/yy"
How I can change this default format.
Hi guys,
I would like to know how I want to change format date from 1989-01-01 to the format dd/mm/yyyy.
thanks and regards
HI,
I have noticed that SQL SERVER 2005 uses American date format but i want to change it to UK/European time format i.e. dd-mm-yyyy
can any on tell me how to do it in sql server settings. And is it possible that I can change it only the during the course of my STORED PROCEDURE.
I know it is quite and any one will answer that soon
hoping quick reply
regards,
Anas
How can I change system date using sqlserver?
Please help me.
What is the best way of converting datatime field value 29/03/2005 08:58:27 to 29/03/2005.
I only want to remove Time from date and I am using Sql Server 2000.
Thanks
Arvind
I am getting dates in American format i.e.
Code:
2011-04-12 00:00:00.000
How can i change it to dd:mm:yyyy ?
I have created a table with a field Register_Date in DATE format. However, it results showed me 21/12/2008 I would like to change it to 21/Dec/2008.
How do I change that using SQL command? I tried to Google and used codes like below and it will not work.
SELECT CONVERT( CHAR(6), Register_Date, 106 )
FROM REG
The error message was ORA-00936: missing expression
I also tried:
SELECT replace(convert(char(15),Register_Date,106),' ',' - ')
FROM REG
and it gives it the same error message.
Would it be possible to change the date time from varchar to datetime. it currently showing as varchar in the following format 20080401 0845
can it be changed to date/time format into something like this 01/04/2008 08:45. If someone could help that would be great. Many thanks
I have a column of text 010208 that is suppose to be a date. How can I changeformat this column to read 01/02/2008?
Lisa Jefferson
How to change date format from database mmddyyyyhhmmss to mmdd only
and my query as below
SELECT emp.name, 'date of employ'= (case when status. num=4 then history.date end),
'date of last_empl'=(case when status.num=5 then history.date end)
Thanks
Daniel
Hi,
We have a server (SQL 2005) set up as US date format
and have tried to change it to UK using syslanguage etc
Anyone know how to do it at a global level so we dont have to change lots of SP
Regards
Stu
I am using the (SQL Express ) bellow given code to restore data from *.bak file (A backup file creater earlier by SQL backup). Some times this do not restore the data and gives error "Restore Failed". But when I change the system date to next day date then it restore data successfully.VB code used is as follow:
Dim strFileName As String
Dim rstDb As New Restore
Dim srv As Server
srv = New Server("(local)SQLEXPRESS")
Dim db As Database
db = srv.Databases("mydatabase")
[code]...
when i use this command in a aspx file
"SELECT DISTINCT Format$([dbo.classgiven.classdate], 'mm/yyyy') AS monthyear,{..............................
'Format$' is not a recognized function name.
so how do i change date from mm/dd/yyyy to mm/yyyy
Hello!
I have a table in an SQL database, in which I have a field in datetime format.
In my aspx page I would like to get the date the user chooses from an asp: calendar I have and submit it to the DB.
I already have all the code ready, the datasource, the gridview, all other fields to submit, and I just added a template field with the asp:calendar so that the user could choose a date.
I´m getting this error when I run the page: "Conversion from type 'Date' to type 'Boolean' is not valid."
It seems to be a problem about the date that is given by the Calendar object (?) and the one I should submit to my DB.
Here´s the part of the code where I have my standard Calendar binded to the correspondant field: <asp:Calendar ID="Calendar1" runat="server" SelectedDate='<%# Bind("data") %>' Visible='<%# Eval("data") %>'> </asp:Calendar>
I´m gessing I should probably change the format of the date somehow before submit it to the DB, but how?
Thank you all,
RR
Hello people.
Please, is there any way to change the date format of a smalldatetime column of a table in SQL Server Express?
What I mean is that the default date format for a column which type is smalldatetime is "MM/dd/yyyy" but I'm developing a localized application and the date format that I would like to use is "dd/MM/yyyy", so I would like to know is if there any way to change this.
I know that I could write some code in my application in order to do the conversion, but I would like to avoid this because I'm using the databinding property of the control and if I have to write a piece of code in order to do the conversion, I will loose this functionality.
I'm currently using WindowsXP SP2, SQL Server Express 2005, SQL Server Management Studio Express and VB.Net 2005 Express Edition. All applications including the OS are USA English version. The application that I'm writing is being localized to PT-BR (Brazilian Portuguese).
Any help and suggestions are very welcomed.
Thanks a lot for all your time and attention.
Rodrigo.
Hi,
Is there a way using a derived column transformation to change the format of the date eg:
The input flat file's date is in yyyy/mm/dd and i need to convert / change this to yyyy/dd/mm
Is this possible?
Thanks in advance,
Slash.
Hi,
I've a parametric report in which 1 paramtere has a date dataType. when it comes on report, it shows a calender but date format is MM/DD/YYYY.
I want to change this date format to DD/MM/YYYY in paramtere calender. How can i do it?
Hi All,
I'm using report with a date parameter (user enters a date) and all transactions before that date are displayed. I don't know how to set parameter date format on the displayed report to dd/mm/yyyy.
If it's not a parameter I usually use sql " convert(varchar(10),datefield,103)" but don't know how to use this with parameter.
Thanks
Sonny
I have a webform that has 2 calendars that i use to insert a dateFrom and dateTo into a sql database table that has the type smalldatetime. When i insert into the database i get yyyy-mm-dd hh:mm:ss but i just want the yyyy-mm-dd not the time. how can i do this with my asp.net c# code? I also has a datetime.Now() that does the same thing.1 string dateNow = DateTime.Now.ToShortDateString();
2
3 string myConnectionString = @"Data Source=SRVWEB02SQLEXPRESS;Initial Catalog=strukton_se;User ID=user;Password=secret";
4
5 SqlConnection myConnection = new SqlConnection(myConnectionString);
6 string myInsertQuery = "INSERT INTO jobs (name, description, contact, datePosted, dateFrom, dateTo) Values(@name, @description, @contact, @datePosted, @dateFrom, @dateTo)";
7 SqlCommand myCommand = new SqlCommand(myInsertQuery);
8 myCommand.Parameters.AddWithValue("name", TextBoxName.Text);
9 myCommand.Parameters.AddWithValue("description", TextBoxDescription.Text.Replace("
", "<br/>"));
10 myCommand.Parameters.AddWithValue("contact", TextBoxContact.Text.Replace("
", "<br/>"));
11 myCommand.Parameters.AddWithValue("datePosted", dateNow);
12 myCommand.Parameters.AddWithValue("dateFrom", Calendar1.SelectedDate.ToShortDateString());
13 myCommand.Parameters.AddWithValue("dateTo", Calendar2.SelectedDate.ToShortDateString());
14
15 ButtonSubmit.Enabled = false;
16
17 myCommand.Connection = myConnection;
18 myConnection.Open();
19 myCommand.ExecuteNonQuery();
20 myCommand.Connection.Close();
Thanks.
I have created an package in SSIS and getting some problem when i am export date from OLEDB to Excel its format getting change. I am passing date format MM/dd/yyyy and its showing yyyy-MM-dd.
View 2 Replies View RelatedI'm currently using the SQL to find records older than todays date in the SSD_SED field. I'm having to update the date manually each day. Is there a way I can automate this?
AND (SSD_SED < '2013-11-01')order by SSD_SED DESC
Ok guys, I am trying to install Sql server 2005 on Vista but I am still stuck with this warning message in the System Configuration Check during Sql server 2K5 installation :
SQL Server Edition Operating System Compatibility (Warning)
Messages
* SQL Server Edition Operating System Compatibility
* Some components of this edition of SQL Server are not supported on this operating system. For details, see 'Hardware and Software Requirements for Installing SQL Server 2005' in Microsoft SQL Server Books Online.
Now, I know I need to install SP2 but how the hell I am going to install SP2 if Sql server 2005 doesn't install any of the components including Sql server Database services, Analysus services, Reporting integration services( only the workstation component is available for installation)?
Any work around for this issue?
P.S.: I didn't install VS.NET 2005 yet, can this solve the problem?
Thanks.
E.g, i have a store procedure. The start date is long date (4/15/2007 3:00pm). i want to select the start date with a particular date (short date format 4/15/2006). Thanks in advance.
View 1 Replies View Relatedselect last_name,hire_date,to_char(hire_date,'DAY') DAYfrom employeesorder by to_char(hire_date-1,'d')i wanted to know how the function to_char(hire_date-1,'d') works...its basically a query used to find the day on which a employee washired ,also it requires that the query be sorted by the day of theweek on which the employee was hired.it'll be helpful is someone replies to this
View 2 Replies View Related
Hi
I wrote query to get date from database SQL 2000 server. Sometime I get different date format not MMDDYYYY but number as Julian calendar?? Do you know what wrong with this? How can I wrote SQL so that all date will be MMDDYYYY?
Thanks
Daniel
I am new to SQL server, and am learning as I move an Access db to MSDE2000A. With Access db I run several different queries from a VB6 application in the basic format:
SELECT testdb.*
FROM testdb
WHERE testdb.datefield = #1/01/2004#
When working with the MDSE version of the db, problem is with the "#" delimiter of dates. MSDE is giving a bad query error. If I change the format to: datefield = '1/01/2004' , the query works on MSDE
However, using SQL builder in VB Design Environment I can run the query in either format and get a result.
Any suggests what I am missing? Thanks.
Dear All,
I'm having a query problem regarding to the date format. From a table, there's a record of patients' birthdate.
In order to identify their age, how should i perform the query?
Select * from patient where BirthDate.Year < 1950
I've tried the above query where i want to extract patients' records who born before 1950, however, it generates error. Can somebody help?
M i K e
Hi
I have a SQL table that contains date in this format :-
2006-07-02 16:20:01.000
2006-07-02 16:21:00.000
2006-07-02 16:21:01.000
2006-07-02 16:22:00.000
2006-07-02 16:22:02.000
2006-07-02 16:23:00.000
The date above contains seconds that I dont want, how can I remove those seconds so that the output looks like :-
2006-07-02 16:20:00.000
2006-07-02 16:21:00.000
2006-07-02 16:21:00.000
2006-07-02 16:22:00.000
2006-07-02 16:22:00.000
2006-07-02 16:23:00.000
Your help will be highly appreciated.