Close All Existing Connections And Processes To A Database
Jun 4, 2007
Dear all
I created this trigger on a table that i think failed while execution. I tried to modify it and run it again but it seems that i cant do that. If i try and delete the database i also cant - saying that it is still in use. But i am not using it and ther are no other users connected to it. I think the trigger has probably hit a loop and that is holding the link.
To close that i know that a solution would be to restart the SQL server instance but that would be a bit hard since the SQL server where my test database resides is a production server and has few other databases that are important and few users use them.
Is there any way through a SQL statement that there can be forced a delete? Or force close all the connections? Or force close all the processes without actually restarting the SQL server instance.
I have tried all options that were offered on some other forums like forcing it to a single user but even that operation can not be performed saying that the database is still in use.
Thank you so much for all your help and time.
Sincerely
Dan
View 1 Replies
ADVERTISEMENT
Aug 13, 2007
Hi All,
I would like to restore database using RESTORE DATABASE ... REPLACE command.
If database exists already and has any open connections this command will fail.
I would like to close all existing connections to specific database before running RESTORE DATABASE ... REPLACE command.
I can do closing from Management Studio using checkbox "Close Existing Connection" when deleting database. Actually I need to do the same but from script.
Please advice me how to do it.
Thanks in advance,
Roman
View 3 Replies
View Related
Jul 14, 2015
In SQL Server Management Studio, it is possible to do the following:
a) In Object Explorer, connect to a particular SQL Server Database Engine, let's call it X.
b) Use that connection to generate many SQL queries, connected to X, in the right-hand pane.
c) In Object Explorer, connect to a particular SQL Server Database Engine, let's call it Y.
d) Use that connection to generate many SQL queries, connected to Y, in the right-hand pane.
e) Close the connection to X, which was created in step (a), from within Object Explorer.
In the right-hand pane, I am now left with a bunch of queries connected to X, and a similar bunch of queries connected to Y. Any quick way to shut all the queries connected to X, but none of the queries connected to Y?
This question can assume real practical importance if server X is a Live Production Server, and server Y is a Test Server, and my next job of the day is to run a change script against server Y....
I have looked for an option in Management Studio to "Close all queries connected to Server X", but haven't found one.
View 6 Replies
View Related
Jan 14, 2008
Hi everybody,How is it possible to close any open connections from the connection pool explicitly like on the log off page? So when the users log off from the application I want to close all connections that were opened during the use of application.asp.net forums is the best....thanks,Murthy here
View 4 Replies
View Related
Jan 11, 2008
Problem: Connections to SOAP endpoints never close even if app initiating call was shutdown several days earlier. Create Endpoint statement included at bottom
Questions:
1 Why?
2. Is there a configuration option I need to set?
[1] Client side: Multiple clients from XMLSpy running on XP Pro to WebSphere Process Server running on AIX
[2] Server side:
What is the MS SQL version? SQL Server 2005 SP2
What is the SKU of MS SQL? Enterprise
What is the SQL Server Protocol enabled? Shared Memory | and TCPIP
Does the server start successfully? YES
If SQL Server is a named instance, is the SQL browser enabled? YES
What is the account that the SQL Server is running under? Domain Account
Do you make firewall exception for your SQL server TCP port if you want connect remotely through TCP provider? NO
Do you make firewall exception for SQL Browser UDP port 1434? In SQL2000, you still need to make firewall exception for UDP port 1434 in order to support named instance. NO
[2a] Tool Used to Connect: Multiple clients from XMLSpy running on XP Pro to WebSphere Process Server running on AIX
[3] Platform:
What is the OS version?Windows 2003 SP2
Do you have third party antivirus, anti-spareware software installed? McAfee. Exceptions have been set in accordance with MS SQL Server documentation
ENDPOINT:
CREATE ENDPOINT [TestEndpoint]
AUTHORIZATION [AuthID]
STATE=STARTED
AS HTTP (PATH=N'/SqlSSL/testEndpoint', PORTS = (SSL), AUTHENTICATION = (BASIC),
SITE=N'Win2003.ent.corp.net', SSL_PORT = 443, COMPRESSION=DISABLED)
FOR SOAP (
WEBMETHOD 'PutTestResponse'( NAME=N'[UserDb].[schema].[usp_test]'
, SCHEMA=DEFAULT
, FORMAT=ALL_RESULTS),
BATCHES=DISABLED,
WSDL=N'[master].[sys].[sp_http_generate_wsdl_defaultcomplexorsimple]',
SESSIONS=ENABLED, SESSION_TIMEOUT=10,
DATABASE=N'UserDb',
NAMESPACE=N'http://tempTestEndpoint.org',
SCHEMA=STANDARD, CHARACTER_SET=XML)
View 1 Replies
View Related
Dec 27, 2004
Hi All,
I'm relatively new to ASP.NET coming from ASP. I've created a new, relatively simple ASP.NET application using WebMatrix with various controls and pages accessing an SQL Server database.
3 people are trying to use this app. After a short amount of time, the server starts kicking back an error message that it can not open a connection. I go in with Enterprise Manager to the SQL Server and I can see a long list of processes there almost as if each page is opening a connection and not closing. I'm explicitly closing all connections in my code where I open them for use by a data reader. What about data grid controls. Do they leave connections open? How about the drag and drop insert/update/delete functions. Unless I'm mistaken, this should close the connection when the function completes, shouldn't it:
Try
rowsAffected = dbCommand.ExecuteNonQuery
Finally
dbConnection.Close
End Try
I originally did this app connecting to an Access database but had the same problem. I figured it was due to the known connection issues with Access via ADO so I upsized to SQL Server and over time, get this same problem.
Any help would be appreciated!
Thanks,
Larry
View 2 Replies
View Related
Nov 21, 2007
should u always close everys sqldatasource connection string and the dataset associated with it,
if so how do u do that (ie the proper way) and is it possible to to do it in the session area of global.aspx, NEt 2.0 or should it be done when exiting the page containing the data stuff,
also same question for NET 1.0 datasets and adapters and strings,
View 1 Replies
View Related
Jul 20, 2005
Just a quick question about connection management. My application willnever need more than 1 or 2 connections about at any given time. Also, I donot expect many users to be connected at any given time. For efficiency, Iwould like to keep connections alive throughout the lifetime of the objectsrequiring them, rather than opening a new connection, executing code andthen closing it again. What is the most efficient way of doing this?Should I perform the open/close or just one open when I create the objectand a close when I dispose of it?
View 1 Replies
View Related
Dec 9, 2014
we have roughly 22 people connected to one database. But after a while, their applications begin to drag due to in and out communication with the server. When i check the active connections on the sql server, some times i see 157 active connections, please how to i set a timeout or connection interval close, so as reduce the heavy load being put on the server. Or how can i automatically close connections when they get higher than 50 connections.
This settings should be sql server 2008 related.
View 5 Replies
View Related
Feb 13, 2008
Hi,
My question is if I close the sqlreader i am using. will that close the connection it uses or the connection will still remain open?
Syed
View 4 Replies
View Related
Aug 2, 2007
I restore a backup every week. It serves a couple of purposes. One, to verify the backup and secondly, to give us a current testing/training environment. As things evolve, it would be nice to script this and then schedule it as a job.
I can write the restore statement, but it fails if any sessions are open on the db. I thought about using sp_who and the the kill statement. But I was having trouble using the recordset returned by sp_who.
Now I'm thinking the sysprocess table is a better place to look. Does anybody have some experience in this area and can point me in the right direction?
While I'm going down this path, does anybody have a script to look at the master database and dynamically manage their backup strategy? That would be super cool?!?!
Thanks,
Alex8675
View 4 Replies
View Related
Oct 27, 2005
Lets say I am selling parts for cars, trucks, suvs, vans, etc.
I want a user to search for a part by selecting a vehicle type, then a vehicle make, and then a vehicle model.
So
Vehicle Makes have to be related to Vehicle Types (I.E: Land Rover doesn’t make a car) and vehicle models need to be related to vehicle make (I.E Toyato doesn’t make a mustang Ford does).
So I am okay with those relationships individually but what is confusing me is how to ensure that a Mustang doesn’t show up as a Ford Car.
Lets say I have:
vehicle_typevehicle_type_cdvehicle_type_desc
vehicle_makevehicle_make_cdvehicle_make_descvehicle_modelvehicle_model_cdvehicle_model_descThen I might have an intersect between vehicle_type and vehicle_make because certain makes don’t have certain types of vehicles. BMW doesn’t have a truck, Lexus doesn’t have a truck, so when a user selects truck as a make lexus nad BMW shouldn’t show up in the drop down.Vehicle_type_makeVehicle_type_make_keyVehicle_type_cdVehicle_make_cd I might have the same relationship between make and model:
View 10 Replies
View Related
Oct 2, 2001
Hi,
I am using SQL Server 7.0. We have set up a task which needs exclusive use of database 'EMS_DB' . How do I schedule a task to run kill all processes in 'EMS_DB' just before this task. Any TSQL scripts for killing all precesses
for a user database?
Thanks in advance,
jfk
View 1 Replies
View Related
Mar 24, 2008
What are the basic processes for maintaining an SQL SERVER 2005 Database?
Is there a top ten list of things you should do periodically to all SQL SERVER 2005 databases?
View 2 Replies
View Related
Apr 13, 2008
Just to verify that this was an issue, I downloaded web developer 2008 and I do not experience this same problem.
BUT when I go to add a dataset in vs2005 for an asp website - all my db files come up in the dialogue box but everyone that click (every db file) I get "This file is in use. Please enter a new name or close the file that's open in another program."
But, like I said, I downloaded 2008 and it does not occur. Plus I KNOW that the db's are not being used. Can someone give me a remedy to this?
View 1 Replies
View Related
Dec 19, 2007
Hello All,
I’m looking for a solution to timeouts that occur when I’m executing a stored procedure from my web application. Most of the SPs will run from 3 to 15 minutes, and, unfortunately, modifying/optimizing them isn’t an option at the moment. I tried setting the CommandTimeout to 0 with no luck. Unless, I didn’t use it properly. Here’s my code: 1
2 try
3 {
4 string dbConn = ConfigurationManager.ConnectionStrings["ConStringNTMTLDEV"].ToString();
5 OleDbConnection connection = new OleDbConnection(dbConn);
6
7 lbl_SearchResult.Text = dbConn;
8
9 //OleDbDataAdapter adapter = new OleDbDataAdapter();
10 OleDbCommand cmd = new OleDbCommand("SP_CallHistoryLookUp", connection);
11 cmd.CommandType = CommandType.StoredProcedure;
12
13 cmd.Parameters.Add(new OleDbParameter("@phoneNumber", "1234567890"));
14 cmd.Parameters.Add(new OleDbParameter("@email", "123@123.com"));
15 cmd.Parameters.Add(new OleDbParameter("@WebUser", "123"));
16 connection.Open();
17 cmd.CommandTimeout = 0;
18 cmd.ExecuteNonQuery();
19 cmd.Dispose();
20 connection.Close();
21 }catch(OleDbException ex)
22 {
23 lbl_SearchResult.Text += "<br/> Something went wrong </br>";
24 lbl_SearchResult.Text += ex.Message.ToString();
25 }
26
27
28
Is it possible to launch a stored procedure and close the connection without waiting for a result?Would the stored procedure still run on the SQL server? I’m using MSSQL 7. Would you have any examples that would solve this problem? Thank you for your help.
R.
View 5 Replies
View Related
May 31, 2001
We are facing lot of problems with Blocking,can any one help us in this matter,The problem is as follows
We have SQL Server 7.0 running on Nt4.0, and three web servers and 5 application servers are accessing SQL server.
Till Yesterday everything was fine,Suddenly today more than 18 processes
were blocked by other(Like chain),First i killed some blocking process,then it was fine,once again it started and continuously some processes are blocked by other,and i found that all blocking process are running from webservers.I ran SQL Profiler to get some information,but no use.
I am not understanding why suddenly it happend,because we have't modified anything.Is there any way to overcome this situation,this is production server.
because of this users are getting slow responce/no responce.
----Here i want to know why it happend?
---How to trace the problem and fix it
Can any one help me please
Thanks
Ananth
View 1 Replies
View Related
Aug 6, 2015
I want to restore a database (from an encrypted .bak file) - but *not* over the live original if you take my meaning. Encryption is the standard AES-256 that comes with Sql Server 2014 btw. I don't want the original touched/altered in any way. I would like to capture a success message if possible.I can extract the physical device name of the database in question using the following code:
SELECT physical_device_name, *
FROM msdb.dbo.backupmediafamily
WHERE media_set_id =(SELECT TOP 1 media_set_id
FROM msdb.dbo.backupset
WHERE database_name='MyDatabase'
AND type='D'
ORDER BY backup_start_date DESC)
I would like if the newly restored database was rename to something different than 'MyDatabase' (as shown above) and has different logs than the original. If possible, and capture a success message when restored.
View 5 Replies
View Related
Feb 20, 2007
Hi, My server went dead(problems with the hard disk), but I have a copy of the whole sql server directory including the database in a external hard disk. I have a new server now and I would like to copy this database (with the reports from reporting services too) from the external hard disk to my new server. can anybody help me please? Thanks.
Note : I have a plain copy of all the sql server directory with all the files including the database not a SQLServer backup done with the wizards.
View 1 Replies
View Related
Sep 24, 2007
Hi guys,
I've been assigned the task of setting up access to our SQL Server 2005 box. A consultant developing for us has accessing to 2 databases and I've set this up fine. It appears however that one of these databases is re-copied over to the server every night to keep data reasonably current.
I'm not interesting in changing this method as I'm not the maintainer (as yet).
Basically I would like to know if I've setup access to this database (it works fine), when the database is updated (with an SSIS package) the account seems to get deleted. Do the original permissions from the source database overwrite those of its destination?
Cheers
View 1 Replies
View Related
Sep 10, 2012
We have a SQL database that uses Active Directory with Windows Authentication. Can users that are members of the Active Directory group that has read/write access to the SQL database create ODBC connections to access the database directly and update the data? They dont have individual logins on the server. They are only members of the Active Directory group that has a login?
View 1 Replies
View Related
Apr 17, 2012
I am new to sql and my boss want me to write the program for database and he wants to pull the info from existing table from sql server which is used by Microsoft GP Dynamics and write me code or some kind of front end so when he wants he can pull same data from GP dynamics table and generate some report with other custom table.
How i can do this task? What I have to do in sql so I can use same table to view info in real time so that means if i enter new data in the table it will show up same time in the front end as well.
View 4 Replies
View Related
Apr 9, 2008
I have a problem when i restore my .DAT_BAK file. I am getting error like "The backup set holds a backup of a database other than existing database. Restore Database is terminating abnormally".
I tried by using
RESTORE DATABASE <DATABASENAME>
FROM DISK = 'D:DATAMYTEST.DAT_BAK'
WITH MOVE 'VZAI_DATA' TO D:PROGRAM FILES..MSSQLTEST.MDF',
MOVE 'VZAI_LOG' TO D:PROGRAM FILES..MSSQLTEST.LDF',
REPLACE
And also i tried like
RESTORE DATABASE <DATABASENAME>
FROM DISK = 'D:DATAMYTEST.DAT_BAK'
WITH REPLACE
When i use like this,
RESTORE FILELISTONLY FROM DISK = 'D:DATAMYTEST.DAT_BAK'. I am able to get the output as LogicalName, PhysicalName, Type, FileGroupName, Size, etc.
Can i anyone please help me out?
Thanks in Advance,
Anand Rajagopal
View 8 Replies
View Related
May 25, 2006
Hi all,
I am fairly new to mobile development and im trying to write a simple application that can read, write from a SQL Server Mobile Database and load data into a list view. The problem im having is trying to find examples on how to do this and i cant seem to get many of the ones i find to work properly. Im still use to recordsets and adodb and if anyone has any examples on how to do this that would be great.
Also, would it possible if someone could explain this code to me as well
Dim conn As SqlCeConnection = Nothing
Dim cmd As SqlCeCommand = Nothing
Dim rdr As SqlCeDataReader = Nothing
Try
' Open the connection and create a SQL command
'
conn = New SqlCeConnection("Data Source = AdventureWorks.sdf")
conn.Open()
cmd = New SqlCeCommand("SELECT * FROM DimEmployee", conn)
rdr = cmd.ExecuteReader()
' Iterate through the results
'
While rdr.Read()
Dim employeeID As Integer = rdr.GetInt32(0) ' or: rdr["EmployeeKey"];
Dim lastName As String = rdr.GetString(5) ' or: rdr["FirstName"];
End While
' Always dispose data readers and commands as soon as practicable
'
rdr.Close()
cmd.Dispose()
Finally
' Close the connection when no longer needed
'
conn.Close()
End Try
Thanks
byeadon
View 1 Replies
View Related
Oct 20, 2007
Hi, I am new to ASP.NET and Visual Web Developer 2005 Express, which I run on Windows Vista. I am currently going through some of the tutorial videos on http://www.asp.net/learn/videos/ . I encountered an error in Lesson 04 and I would have ignored it but it keeps haunting me and now I cannot proceed with the lesson 09 all because of the same error. I would really appreciate it if somebody could help me resolve this because it.
General error text
The database filename can not contain the following 3 characters: [ (open square brace), ] (close square brace) and ' (single quote)
Lesson 4 circumstances
Web.Configis modified to contain the following code just before the closing </system.web> tag:<anonymousIdentification enabled="true"/><profile enabled="true"> <properties> <add name="MyNewProperty" allowAnonymous="true"/> </properties></profile>
View 2 Replies
View Related
Nov 14, 2007
I went to look at the connection string previously entered for a dataset created in a new report, and am not seeing anything intuitive for bringing up the associated datasource dialog box that was used to enter name, type and connection string. I'm also noticing nothing intuitive for deleting an existing dataset. How do you do these two very simple things in an existing project? I dont see the dataset in solution explorer, I see it only in the text box on the data tab and in a limited kind of way on the dataset view where the columns show and maint is allowed mostly on the columns only. I tried hilighting the dataset here and hitting the delete key to no avail.
View 1 Replies
View Related
Oct 12, 2007
Hi
Anyone Knows
I want to store SQL 2005 Existing Database into SQL Server Through .Net.if i give Database Name in .Net and that Database automatically stored in SQL Server 2005.P(including that Existing Database Tables and Stored Procedures).Please Help me.
Tamil
View 2 Replies
View Related
May 7, 2008
I've plan to writing Stored Procedure ("SP"). This SP contains program that produce a result and this result will insert into already define summary table. This SP will running every 30 minutes.
What is the best solution? I should put this already define summary table in existing Database or i should create a new database and create the summary table into this new database. Can i using ReportServer Database to create this summary table?
I'm using SQL Server 2005.
View 4 Replies
View Related
Jan 23, 2008
I have a MSSQL database from a pre-existing app. The data files do not have an MDF exension, they have a .dat extension. I can however use Microsoft SQL Server Management Studio Express to run queries against the files, but I can not get VB 2005 to connect. When I attemp to add it as a project data source, I get the following error:
"An attempt to attach an auto-named database for file c:dataMSSQL$DATA_SQL....dat* failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share."
*Database names = company names are omitted to 'protect the innocent'.
Does anyone have any ideas? Since Microsoft SQL Server Management Studio Express worked so cleanly with the database I was expecting to easily get to the same data using VB.
View 5 Replies
View Related
May 28, 2015
Can we create the SDF file from existing Database in SQL server?
View 2 Replies
View Related
Aug 12, 2007
I have a Systema that uses a DataBase an I Want to Install y other machines, I need to Install a Visual Studio Program that uses a Database, How do I Install The Visual Studio Program, the Sql Server Express, and the existing DataBase.
Thanks in Advance, Santiago
View 4 Replies
View Related
Jan 19, 2007
How do I go about creating a cloned copy of an existing database on the same server? I basically want to set up a test copy of a production database, but let it reside on the same server with a slightly different name, prefixed with 'Testing_".
I typically just use Studio Express Manager and not scripts to do admin tasks. Here's what I tried that didn't work so well:
* Had full backups of production db
* Detached production database I wanted to clone
* From within Win Explorer, copy the .mdf and .ldf files within same data folder and gave them a new name, prefixing with "Testing_"
* Re-attached prodution db
* Attached "Testing_..." database
Sql Express seems confused at this point with new database I attached. It references the full path of the database I copied from (c:program filesmicrosoft sql servermssql.1data...". I rename the datbase, removing full path and prefixing with "Testing_".
* Using Sql authentication, changed the default database for the Login account to the new cloned copy of database.
* Did some query level data sanitizing to the cloned copy of the db. I am positive I performed this on the correct db.
* Was able to connect/authenticate to the cloned copy through a custom VB app on my dev machine, and all looked well.
* Tried to connect to the cloned db from another machine and couldn't. Went back to my dev machine and noticed the original production db looked hosed -- there were no tree nodes available to it! Was still able to connect to the cloned "Testing_" db copy, but not able to connect/authenticate anymore to the production copy.
* Detached cloned copy of "Testing_" db and moved it out of the data folder.
* Detached production db. Got an error msg indicating operation failure of some kind, but the database was gone from the tree.
* Reattached the production db but couldn't hit it from my custom vb app. Re-did the login and user accounts used by the app and was able to hit it. However, the data sanitizing I had done earlier in the cloned copy clearly was visibile in the production db!
* Had to restore production db from backup. Had problems authenticating from app, and recreated User account before the app was to connect.
Q1: What I am doing wrong? Sql Express was obviously as confused as me somewhere along the line.
Q2: Is specifying a default database used by a Login account necessary for a VB app like mine. I think it was something I discovered in the past, however, this would seemingly present a problem whenever I want my app to hit a different database, established through a connection string.
TIA...
Rick
View 10 Replies
View Related
May 19, 2007
Hi to all,
I was visting one hosting company website and was reading there hosting plans. One line I got there (Maximum number of 50 simultaneous connections are allowed per user/DataBase.). What is the meaning of this line?
Big Thanks!
Harsh
View 2 Replies
View Related
