We have a one node cluster that is receiving the below error messages in the cluster.log and the Event Viewer. In the SQL Server 2005 SP2 job that fails we receive a slighlty different message. The OS is Windows 2003 SP1. This is not a 64-bit box. We have checked the permissions of the cluster service account in SQL Server to be sure they are correct. Can anyone please help with this issue.
00000a0c.0000089c::2007/06/12-12:51:27.459 ERR SQL Server <SQL Server>: [sqsrvres] CheckQueryProcessorAlive: sqlexecdirect failed
00000a0c.0000089c::2007/06/12-12:51:27.459 ERR SQL Server <SQL Server>: [sqsrvres] printODBCError: sqlstate = 08S01; native error = 2746; message = [Microsoft][SQL Native Client]TCP Provider: An existing connection was forcibly closed by the remote host.
00000a0c.0000089c::2007/06/12-12:51:27.459 ERR SQL Server <SQL Server>: [sqsrvres] printODBCError: sqlstate = 08S01; native error = 2746; message = [Microsoft][SQL Native Client]Communication link failure
00000a0c.0000089c::2007/06/12-12:51:27.459 ERR SQL Server <SQL Server>: [sqsrvres] OnlineThread: QP is not online.
00000a0c.0000089c::2007/06/12-12:51:27.459 ERR SQL Server <SQL Server>: [sqsrvres] CheckQueryProcessorAlive: sqlexecdirect failed
00000a0c.0000089c::2007/06/12-12:51:27.459 ERR SQL Server <SQL Server>: [sqsrvres] printODBCError: sqlstate = 08S01; native error = 0; message = [Microsoft][SQL Native Client]Communication link failure
00000a0c.0000089c::2007/06/12-12:51:27.459 ERR SQL Server <SQL Server>: [sqsrvres] CheckQueryProcessorAlive: sqlexecdirect failed
00000a0c.0000089c::2007/06/12-12:51:27.459 ERR SQL Server <SQL Server>: [sqsrvres] printODBCError: sqlstate = 08S01; native error = 0; message = [Microsoft][SQL Native Client]Communication link failure
00000a0c.0000089c::2007/06/12-12:51:27.459 ERR SQL Server <SQL Server>: [sqsrvres] CheckQueryProcessorAlive: sqlexecdirect failed
00000a0c.0000089c::2007/06/12-12:51:27.459 ERR SQL Server <SQL Server>: [sqsrvres] printODBCError: sqlstate = 08S01; native error = 0; message = [Microsoft][SQL Native Client]Communication link failure
00000a0c.0000089c::2007/06/12-12:51:27.459 ERR SQL Server <SQL Server>: [sqsrvres] CheckQueryProcessorAlive: sqlexecdirect failed
00000a0c.0000089c::2007/06/12-12:51:27.459 ERR SQL Server <SQL Server>: [sqsrvres] printODBCError: sqlstate = 08S01; native error = 0; message = [Microsoft][SQL Native Client]Communication link failure
00000a0c.0000089c::2007/06/12-12:51:27.459 ERR SQL Server <SQL Server>: [sqsrvres] CheckQueryProcessorAlive: sqlexecdirect failed
00000a0c.0000089c::2007/06/12-12:51:27.459 ERR SQL Server <SQL Server>: [sqsrvres] printODBCError: sqlstate = 08S01; native error = 0; message = [Microsoft][SQL Native Client]Communication link failure
I keep getting a cluster error I have no clue why it is happing. The error is "No Checkpoint record was found in log file Z:logschk1431.tmp the checkpoint file is invalid or was deleted." any help will be welcome.
We have a sql server 2000 active/passive cluster running on Windows Server 2003 and within the last 6 months have started getting the following errors which eventually cause the SQL Resource Group to failover.
An error occurred in the configuration monitor for instance <SQL Server Fulltext>: 80070005 - Access is denied.
SQL is at the latest service pack/hotfixes. (8.00.2187)
This cluster has been running fine for the past 3 years with no problems. Nothing has changed on the servers.
We've had Symantic Antivirus running on the servers for a long time but the FTDATA folder and the sql data and transaction logs are excluded and nothing has changed on the configuration.
We also run Diskeeper 2007 server on these servers but I can't see any problems with this.
Once it fails over it will run fine for several days and then the same errors will occur and it fails over again.
Any ideas on what might be causing this? I can't really find anything on the Microsoft site that matches this error.
Note: This has also just started happening on our test cluster which is an identical configuration.
I have windows server 2003 service pack 1 and sql server 2005 service pack 1 - 64 bit. Sometimes it happens in the middle of the night. Sometimes it's in the middle of the day and sometimes it's multiple times in the same day. Sometimes the server reboots, but does not failover.
I am trying to install SQL 2005 in a 2-node Windows 2003 cluster. I set the cluster up through Virtual Server 2005 with 2 virtual nodes and one virtual domain. The nodes can connect to each other as well as the physical machine. When I try to install a fresh copy of SQL 2005 on my cluster, I get an error every time. The error stops the installation while checking system configuration after installing prerequisites. The log file entry is as follows:
******************************************* Setup Consistency Check Report for Machine: --SERVERNAME-- ******************************************* Article: WMI Service Requirement, Result: CheckPassed Article: MSXML Requirement, Result: CheckPassed Article: Operating System Minimum Level Requirement, Result: CheckPassed Article: Operating System Service Pack Level Requirement, Result: CheckPassed Article: SQL Compatibility With Operating System, Result: CheckPassed Article: Minimum Hardware Requirement, Result: CheckPassed Article: IIS Feature Requirement, Result: Warning Description: IIS is not installed, therefore Report Server feature will be disabled Action: Install IIS in order for Report Server feature to be enabled Article: Pending Reboot Requirement, Result: CheckPassed Article: Performance Monitor Counter Requirement, Result: CheckPassed Article: Default Installation Path Permission Requirement, Result: CheckPassed Article: Internet Explorer Requirement, Result: CheckPassed Article: Check COM+ Catalogue, Result: CheckPassed Article: ASP.Net Registration Requirement, Result: CheckPassed Article: Minimum MDAC Version Requirement, Result: CheckPassed <Func Name='PerformDetections'> 1 Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlsval.dll Version:2005.90.1399.0 Error: Action "InvokeSqlSetupDllAction" threw an exception during execution. Error information reported during run: Source File Name: datastorecachedpropertycollection.cpp Compiler Timestamp: Fri Jul 29 01:13:49 2005 Function Name: CachedPropertyCollection::findProperty Source Line Number: 130 ---------------------------------------------------------- Failed to find property "ComputerList" {"SqlComputers", "", ""} in cache Source File Name: datastoreclusterinfocollector.cpp Compiler Timestamp: Fri Sep 16 13:20:12 2005 Function Name: ClusterInfoCollector::collectClusterVSInfo Source Line Number: 883 ---------------------------------------------------------- Failed to detect VS info due to datastore exception. Source File Name: datastoreclustergroupsproperties.cpp Compiler Timestamp: Fri Jul 29 01:13:49 2005 Function Name: ClusterGroupScope.SharedDisks Source Line Number: 56 ---------------------------------------------------------- Failed to find a cluster group that owned shared disk: J: WinException : 2 Error Code: 0x80070002 (2) Windows Error Text: The system cannot find the file specified. Source File Name: datastoreclustergroupsproperties.cpp Compiler Timestamp: Fri Jul 29 01:13:49 2005 Function Name: ClusterGroupScope.SharedDisks Source Line Number: 56
I am following the 2005 BOL article "How to: Remove a SQL Server 2005 Failover Clustered Instance (Setup)". The process is very simple, but perhaps the documentation is missing some steps. I am receiving the following errors during the uninstall.
The setup has encountered an unexpected error while Completing Commit. The error is: The cluster resource cannot be moved to another group because other resources are dependent on it.
If I click OK I receive the error below.
Failed to set registry settings for server network libraries. The action is SetShilohRoot. The error is 2 (The system cannot find the file specified.)
Am I supposed to do something to the cluster prior to performing the uninstall?
We are currently having the following problem. When trying to connect using "Be made using the login's current security context" I am getting the following error message "Login Failed for NTAuthorityAnonLogin". Yesterday this worked. The setup is as follows
SQL2008R2, nine instances on a cluster. The instance can use "current security context" when both instances are on the same node ie instance 1 node a to instance 2 node a , but when one is on node a and the other is on node b, i.e., instance 1 node 1 to instance 2 node b, we get the error above.
I am following the 2005 BOL article "How to: Remove a SQL Server 2005 Failover Clustered Instance (Setup)". The process is very simple, but perhaps the documentation is missing some steps. I am receiving the following errors during the uninstall.
The setup has encountered an unexpected error while Completing Commit. The error is: The cluster resource cannot be moved to another group because other resources are dependent on it.
If I click OK I receive the error below.
Failed to set registry settings for server network libraries. The action is SetShilohRoot. The error is 2 (The system cannot find the file specified.)
Am I supposed to do something to the cluster prior to performing the uninstall?
I am installing SQL 2005 on a 2-node cluster running on Windows 2003 R2. When I try to install SQL 2005 on my cluster, I get an installation error. The error stops the installation while checking system configuration after installing prerequisites. The log file entry is as follows:
C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe Version: 2005.90.1399.0 Running: LoadResourcesAction at: 2007/9/12 16:6:42 Complete: LoadResourcesAction at: 2007/9/12 16:6:42, returned true Running: ParseBootstrapOptionsAction at: 2007/9/12 16:6:42 Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapxmlrw.dll Version:2.0.3604.0 Complete: ParseBootstrapOptionsAction at: 2007/9/12 16:6:42, returned true Running: ValidateWinNTAction at: 2007/9/12 16:6:42 Complete: ValidateWinNTAction at: 2007/9/12 16:6:42, returned true Running: ValidateMinOSAction at: 2007/9/12 16:6:42 Complete: ValidateMinOSAction at: 2007/9/12 16:6:42, returned true Running: PerformSCCAction at: 2007/9/12 16:6:42 Complete: PerformSCCAction at: 2007/9/12 16:6:42, returned true Running: ActivateLoggingAction at: 2007/9/12 16:6:42 Complete: ActivateLoggingAction at: 2007/9/12 16:6:42, returned true Running: DetectPatchedBootstrapAction at: 2007/9/12 16:6:42 Complete: DetectPatchedBootstrapAction at: 2007/9/12 16:6:42, returned true Action "LaunchPatchedBootstrapAction" will be skipped due to the following restrictions: Condition "EventCondition: __STP_LaunchPatchedBootstrap__3608" returned false. Action "BeginBootstrapLogicStage" will be skipped due to the following restrictions: Condition "Setup is running locally." returned true. Running: PerformDotNetCheck2 at: 2007/9/12 16:6:42 Complete: PerformDotNetCheck2 at: 2007/9/12 16:6:42, returned true Running: InvokeSqlSetupDllAction at: 2007/9/12 16:6:42 Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlspars.dll Version:2005.90.1399.0 <Func Name='DwLaunchMsiExec'> Examining 'sqlspars' globals to initialize 'SetupStateScope' Opening 'MachineConfigScope' for [OAKLRRDSDBA] Trying to find Product Code from command line or passed transform If possible, determine install id and type Trying to find Instance Name from command line. No Instance Name provided on the command line If possible, determine action Machine = OAKLRRDSDBA, Article = WMIServiceWin32OSWorking, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = WMIServiceWin32CompSystemWorking, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = WMIServiceWin32ProcessorWorking, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = WMIServiceReadRegWorking, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = WMIServiceWin32DirectoryWorking, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = WMIServiceCIMDataWorking, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = XMLDomDocument, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = Processor, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = PhysicalMemory, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = DiskFreeSpace, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = OSVersion, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = OSServicePack, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = OSType, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = iisDep, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = AdminShare, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = PendingReboot, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = PerfMon, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = IEVersion, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = DriveWriteAccess, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = COMPlus, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = ASPNETVersionRegistration, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = MDAC25Version, Result = 0 (0x0) ******************************************* Setup Consistency Check Report for Machine: OAKLRRDSDBA ******************************************* Article: WMI Service Requirement, Result: CheckPassed Article: MSXML Requirement, Result: CheckPassed Article: Operating System Minimum Level Requirement, Result: CheckPassed Article: Operating System Service Pack Level Requirement, Result: CheckPassed Article: SQL Compatibility With Operating System, Result: CheckPassed Article: Minimum Hardware Requirement, Result: CheckPassed Article: IIS Feature Requirement, Result: CheckPassed Article: Pending Reboot Requirement, Result: CheckPassed Article: Performance Monitor Counter Requirement, Result: CheckPassed Article: Default Installation Path Permission Requirement, Result: CheckPassed Article: Internet Explorer Requirement, Result: CheckPassed Article: Check COM+ Catalogue, Result: CheckPassed Article: ASP.Net Registration Requirement, Result: CheckPassed Article: Minimum MDAC Version Requirement, Result: CheckPassed <Func Name='PerformDetections'> 1 Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlsval.dll Version:2005.90.1399.0 Error: Action "InvokeSqlSetupDllAction" threw an exception during execution. Error information reported during run: Source File Name: datastorecachedpropertycollection.cpp Compiler Timestamp: Fri Jul 29 01:13:49 2005 Function Name: CachedPropertyCollection::findProperty Source Line Number: 130 ---------------------------------------------------------- Failed to find property "ComputerList" {"SqlComputers", "", ""} in cache Source File Name: datastoreclusterinfocollector.cpp Compiler Timestamp: Fri Sep 16 13:20:12 2005 Function Name: ClusterInfoCollector::collectClusterVSInfo Source Line Number: 883 ---------------------------------------------------------- Failed to detect VS info due to datastore exception. Source File Name: datastorecachedpropertycollection.cpp Compiler Timestamp: Fri Jul 29 01:13:49 2005 Function Name: CachedPropertyCollection::findProperty Source Line Number: 130 ---------------------------------------------------------- Failed to find property "InstallIds" {"MachineConfiguration", "", "OAKLRRDSDBB"} in cache Source File Name: datastoresqldiscoverycollector.cpp Compiler Timestamp: Fri Jul 29 01:13:50 2005 Function Name: SqlDiscoveryCollector::collectProperty Source Line Number: 132 ---------------------------------------------------------- Failed to open discovery on machine: OAKLRRDSDBB WinException : 2 Error Code: 0x80070002 (2) Windows Error Text: The system cannot find the file specified. Source File Name: datastoresqldiscoverycollector.cpp Compiler Timestamp: Fri Jul 29 01:13:50 2005 Function Name: SqlDiscoveryCollector::collectProperty Source Line Number: 132
I receive the below mentioned error message each time I try to install SP2 on SQL 2005 64 Bit Cluster: Using PrevRegRootPath: SoftwareMicrosoftMicrosoft SQL ServerMSSQL.2 GetServiceUserGroup failed for PLMCWSM01, 5 Error Code: 0x800706fd (1789) Windows Error Text: The trust relationship between this workstation and the primary domain failed. Source File Name: sqlcasqlcax.cpp Compiler Timestamp: Fri Feb 9 22:35:02 2007 Function Name: SetInstanceProperty Source Line Number: 1223
MSI (s) (78!08) [01:05:21:864]: Transforming table Error. MSI (s) (78!08) [01:05:21:989]: Transforming table Error.
MSI (s) (78!08) [01:05:21:989]: Note: 1: 2262 2: Error 3: -2147287038 MSI (s) (78!08) [01:05:21:989]: Product: Microsoft SQL Server 2005 (64-bit) -- Error 29528. The setup has encountered an unexpected error while Setting Internal Properties. The error is: Fatal error during installation. Error 29528. The setup has encountered an unexpected error while Setting Internal Properties. The error is: Fatal error during installation.
I am trying to install SQL 2005 in a 2-node Windows 2003 cluster. I have tried both upgrade and fresh installation, but got same error. The error stops the installation while checking system configuration after installing prerequisites. The log file entry is as follows:
I am installing SQL 2005 on a 2-node cluster running on Windows 2003 R1. When I try to install SQL 2005 on my cluster, I get an installation error. The error stops the installation while checking system configuration after installing prerequisites. The log file includes the following message
could not find file datastoresqldiscoverycollector.cppp Failed to start discovery on machince :Node2
This happens when I run the steup from Node1 .When I run the installation on Node I get the same error with the machine name as Node1 .
I tried Enabling Netbios over TCPIP for the heartbeat network however with no results
Can somebody please provide the next steps .A step by step approach will be greatly appreciated .
I have the following setup: 1. Clustered Microsoft SQL Server 2005 (Build 3790: Service Pack 2) with .net 2.0 - Server A 2. Separate server containing the SSIS services (Per Microsoft - SSIS isn't cluster aware). - Server B
I am getting the following error when I run a SSIS package through a scheduled job on the Server A:
Description: The task "Set dynamic file name variable" cannot run on this edition of Integration Services. It requires a higher level edition.
I found the following post that fixes the issue, but I don't want to install SSIS on the SQL Cluster (Server A) because it isn't cluster aware.
This package runs fine locally from Visual Studio or from Server B. All of my other SSIS packages run fine on the Server A through the SQL Agent. This package fails on a script task that is setting some dynamic variables. Do I need to install some additional components or service packs to SQL Server on Server A?
I don't want to install SQL Server on the Server B and run the jobs through that agent because we don't have the money for a separate license.
I'm getting the following error when I go to create a cluster in the Failover Cluster Manager in Windows Server 2008.
"The address 10.10.10.111 is not valid for its associated network"
I'm following the instruction in the book for the 70-462 exam. Â There was a step that had me create a DNS A record for the address sql-cluster.contoso.com. Â The IP address was mapped to 10.10.10.111. Â I'm not sure if this is the culprit but its the only time I used that IP address in the setup.
Below are 2 screenshots. Â The first screenshot is the error. Â The second screenshot is my DNS console.
I have problem when I create the clusters I created domain account and give him permission create computer objects and real all properties but there are problem when clean up the cluster always pop up and error but latter I tried using my domain admin and worked perfectly is there any permission is missing for cluster ? or all I need is Create Computer Object and Read Permission?
We recently migrated our production environment from a win2k3/SQL 2000 EE cluster to a new 64 bit win2k3/ SQL 2005 SP1 Cluster.
Cluster works fine for a while (3-6 hours), then our logins start failing. We recieve the following error in the event log:
"The server was unable to load the SSL provider library needed to log in; the connection has been closed. SSL is used to encrypt either the login sequence or all communications, depending on how the administrator has configured the server. See Books Online for information on this error message"
The only way to resume connectivity is to offline and online the sql service in the cluster.
The only reference to this error that I can find has something to do with a hotfix that might be available?
During the installation of Adding node to a SQL Server failover cluster(On passive node) getting error like.. The MOF compiler could not connect with the WMI server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI server to start.We  run the below commands but didn’t get any resolution & got the same above error .  1<sup>st</sup> Method…
1. Open console command (Run->CMD with administrator privileges).Â
2. net stop winmgmtÂ
3. Rename folder %windir%System32WbemRepository to other one, for backup purposes (for example _Repository).Â
4. net start winmgmt
2<sup>nd</sup>Â Method..
1. Disable and stop the WMI service.
a) Command : - sc config winmgmt start= disabled
b. Command : - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â net stop winmgmt
I am in the process of moving databases from a SQL 2005 Standard version to a 2-node 2014 cluster.All of my 2005 databases back up successfully.They all restore without issue except for one database that has a full text catalog. I get this message
Msg 7610, Level 16, State 1, Line 2 Access is denied to "fileStoragedataMSSQLSERVERFullTextCatalog", or the path is invalid. Msg 3156, Level 16, State 50, Line 2 File 'sysft_FTCatalog' cannot be restored to 'fileStoragedataMSSQLSERVERFullTextCatalog'. Use WITH MOVE to identify a valid location for the file. Msg 3119, Level 16, State 1, Line 2 Problems were identified while planning for the RESTORE statement. Previous messages provide details. Msg 3013, Level 16, State 1, Line 2 RESTORE DATABASE is terminating abnormally.
[code]....
I went as far as giving the folder full access to everyone temporarily and received the same error.
Issue when building a FCI where after the step of specifying what drives the data, logs, tempdb go, the installer errors with this message:
Exit message: The volume that contains SQL Server data directory D:SQL_DataMSSQL11.MSSQLSERVERMSSQLDATA does not belong to the cluster group.
We are running Windows Server 2012 R2 and SQL Server 2012 Enterprise with Veritas Storage Foundation for Windows 6.1. I've confirmed that the disk group exists and is mounted in Windows and presented as available storage. Symantec has an article detailing this same circumstance but the Microsoft KB article that they refer to only has hotfixes for Windows Server 2012, not R2.
Can I build a cluster by adding the cluster service, then the SQL instances, then add the other nodes and their passive SQL instances?I would lean to building the cluster first, the add the SQL instances.
We made SSIS package in dev environment in windows 2008R2 and SQL server 2012. Same packages were placed on SAN disks in cluster environment and are invoked with security contexxt of admin user and wih dtexec utility ( we call this using an sp). rarely but procedure completed i see the log text file by SSIS package and find the return code 5 means package is unable to load. i canst found what are the exact reasons for return code 5.
I have been facing following Error in Failover cluster setup as below. I have prepared 2 node and 2 instance sql server failover cluster on top of windows failover.I have deleted MTCBJINS07 in AD and recreated even after, problem is not solved. MTCBJINS07 is my 2nd sql instance sql server network name.
Cluster network name resource 'SQL Network Name (MTCBJINS07)' failed registration of one or more associated DNS name(s) for the following reason:
DNS bad key.Ensure that the network adapters associated with dependent IP address resources are configured with at least one accessible DNS server.
I'm getting an error adding Replica to SQL AlwaysOn failover cluster in the new availability group wizard. When I enter the name of the target node (secondary replica) server and press connect, I get the following:  Â
A network-related or instance-specific error occurred while establishing a connection to SQL Server.Â
The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2) The system cannot fine the file specified
The SQL Browser service is up and running on the target. I am using an Azure VM for my SQL instance. This cluster spans geographies from our on-premise site to Azure via a VPN. This is a multi-subnet cluster. I'm attempting to create a new AG from the primary replica node and the target is a node on Azure called SSASNodeAz03.Â
[URL]
Full error:
Connect to Server Cannot connect to ssasnodeaz03
Additional information: A network-related or instance-specific error occurred while establishing a connection to SQL Server.Â
The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2) The system cannot fine the file specified
When I tried to SQL Server 2005 (Standard) to two-node Windows 2003 servers, the Remote Setup task on the 2nd node hang. Here is the SQL Setup log. Please help figure out the cause of the problem. Thanks in advance.
Microsoft SQL Server 2005 Setup beginning at Tue Apr 24 16:17:14 2007 Process ID : 2864 \irv144C$SQL2005Std-x64disc1setup.exe Version: 2005.90.1399.0 Running: LoadResourcesAction at: 2007/3/24 16:17:14 Complete: LoadResourcesAction at: 2007/3/24 16:17:14, returned true Running: ParseBootstrapOptionsAction at: 2007/3/24 16:17:14 Loaded DLL:\irv144C$SQL2005Std-x64disc1xmlrw.dll Version:2.0.3604.0 Complete: ParseBootstrapOptionsAction at: 2007/3/24 16:17:14, returned false Error: Action "ParseBootstrapOptionsAction" failed during execution. Error information reported during run: Could not parse command line due to datastore exception. Source File Name: utillibpersisthelpers.cpp Compiler Timestamp: Fri Jul 29 01:13:55 2005 Function Name: writeEncryptedString Source Line Number: 124 ---------------------------------------------------------- writeEncryptedString() failed Source File Name: utillibpersisthelpers.cpp Compiler Timestamp: Fri Jul 29 01:13:55 2005 Function Name: writeEncryptedString Source Line Number: 123 ---------------------------------------------------------- Error Code: 0x80070002 (2) Windows Error Text: The system cannot find the file specified.
Source File Name: cryptohelpercryptsameusersamemachine.cpp Compiler Timestamp: Mon Jun 13 14:30:00 2005 Function Name: sqls::CryptSameUserSameMachine:rotectData Source Line Number: 50
2 Could not skip Component update due to datastore exception. Source File Name: datastorecachedpropertycollection.cpp Compiler Timestamp: Fri Jul 29 01:13:49 2005 Function Name: CachedPropertyCollection::findProperty Source Line Number: 130 ---------------------------------------------------------- Failed to find property "InstallMediaPath" {"SetupBootstrapOptionsScope", "", "2864"} in cache Source File Name: datastorepropertycollection.cpp Compiler Timestamp: Fri Jul 29 01:13:50 2005 Function Name: SetupBootstrapOptionsScope.InstallMediaPath Source Line Number: 44 ---------------------------------------------------------- No collector registered for scope: "SetupBootstrapOptionsScope" Running: ValidateWinNTAction at: 2007/3/24 16:17:14 Complete: ValidateWinNTAction at: 2007/3/24 16:17:14, returned true Running: ValidateMinOSAction at: 2007/3/24 16:17:14 Complete: ValidateMinOSAction at: 2007/3/24 16:17:14, returned true Running: PerformSCCAction at: 2007/3/24 16:17:14 Complete: PerformSCCAction at: 2007/3/24 16:17:14, returned true Running: ActivateLoggingAction at: 2007/3/24 16:17:14 Error: Action "ActivateLoggingAction" threw an exception during execution. Error information reported during run: Datastore exception while trying to write logging properties. Source File Name: datastorecachedpropertycollection.cpp Compiler Timestamp: Fri Jul 29 01:13:49 2005 Function Name: CachedPropertyCollection::findProperty Source Line Number: 130 ---------------------------------------------------------- Failed to find property "primaryLogFiles" {"SetupStateScope", "", ""} in cache Source File Name: datastorepropertycollection.cpp Compiler Timestamp: Fri Jul 29 01:13:50 2005 Function Name: SetupStateScope.primaryLogFiles Source Line Number: 44 ---------------------------------------------------------- No collector registered for scope: "SetupStateScope" 0000000000EDAF90Unable to proceed with setup, there was a command line parsing error. : 2 Error Code: 0x80070002 (2) Windows Error Text: The system cannot find the file specified.
Source File Name: datastorepropertycollection.cpp Compiler Timestamp: Fri Jul 29 01:13:50 2005 Function Name: SetupBootstrapOptionsScope.InstallMediaPath Source Line Number: 44
I have following script which i am planning to run to drop all non-clustered primary keys on a database and then created as clustered. I am using someone else's script so don't know how to modify this. Some of primary key columns are used in references in other tables.
is there anyway i can drop the existing primary keys and using their original script then create again as clustered including restoring all foreign and reference keys and unique or no unique.
DECLARE @table NVARCHAR(512), @tablename NVARCHAR(512), @sql NVARCHAR(MAX), @sql2 NVARCHAR(MAX), @sql3 NVARCHAR(MAX), @column NVARCHAR(MAX); DECLARE @indexname NVARCHAR(512); SELECT name As 'Table'
We are planning to change all IPs of PRODUCTION Failover Cluster Setup. In my cluster setup ... we have 2 Physical Nodes with windows-2008, Roles are MSDTC and SQL-2008R2.
IP change for:
1. Both Nodes(Physical) 2. MSDTC 3. SQL Server 4. windows ClusterÂ
So Almost... All IPs are going to change.
Im DBA here, I need to take care of SQL cluster and MSDTC. But I haven't performed this activity before.So I'm worrying about Impacts and consequences of this change. steps how should I perform this activity.
I found errors frequently in cluster events at  logs as below
"Cluster network interface 'Node1 - 10.X.XXX.1' for cluster node 'Node1' on network 'Cluster Network 1' failed. Run the Validate a Configuration wizard to check your network configuration. If the condition persists, check for hardware or software errors related to the network adapter. Also check for failures in any other network components to which the node is connected such as hubs, switches, or bridges."
How to fix this issues? is it missing any patch OS or cluster side?
I have destroyed the cluster in failover cluster manager and then i am trying to remove node from the sql server installation centre.I am facing the cluster node and cluster service verification errors.I am not able to start the cluster service in services as well.
I have problem when installing SQL 2005 Enterprise to my Windows 2003 R2 cluster. I install the SQL instance on the first node in my cluster, it analyses the cluster and comes up with no errors or warnings, i answer all the installation questions and proceed with the installation. When installing the SQL engine I see the status changing as the instance is started and then stopped again etc, finally the status changes to "removing backup files" when it get an error that reports:
"The setup has encountered an unexpected error while Completing Commit. The error is: The specified module could not be found."
Unfortunately there isnt any more information to go on. Any help would be appreciated.
I have copied install files to both local and remote locations
I know the response €“ Installshield cannot find the silent response file, but SQL setup creates this on its own. Short of bringing this production system down and re-installing on both nodes ( I did test this on a non-prod box by the way, no issues), I am at a loss
