I am putting together a SQL table which will hold a latitude and
longitude for each record. An example of a latitude is: 47 05 36.5
Which column type would best represent this and retain the spaces
between degrees, minutes, seconds? Text, varchar, char?
Thanks
Jeff
Join Bytes!
I am trying to use the Bulk Insert Task to load from a csv file. My final column is a bit that is nullable. My file is an ID column that is int, a date column that is mm/dd/yyy, then 20 columns that are real, and a final column that is bit. I've tried various combinations of codepage and datafiletype on my task component. When I have RAW with Char, I get the error included below. If I change to RAW/Native or codepage 1252, I don't have an issue with the bit; however, errors start generating on the ID and date columns.
I have tried various data type settings on my flat file connection, too. I have tried DT_BOOL and the integer datatypes. Nothing seems to work.
I hope someone can help me work through this.
Thanks in advance,
SK
SSIS package "Package3.dtsx" starting.
Error: 0xC002F304 at Bulk Insert Task, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Error: 0xC002F304 at Bulk Insert Task 1, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Task failed: Bulk Insert Task 1
Task failed: Bulk Insert Task
Warning: 0x80019002 at Package3: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package3.dtsx" finished: Failure.
Hi All,
I am working on a column chart type (stacked column sub-type) report.
Our customer requires us that the space(padding) between the columns should be a constant(including the space between the Y-axis and the first column). I know how to set the width of the columns, but I really don't know how to set the width of the space between them. The columns just varies the space between them automatically according to the number of the columns (the number of the columns is not certain).
Thanks a lot in advance!
Danny
Hi guys,
If I have a temporary table called #CTE
With the columns
[Account]
[Name]
[RowID Table Level]
[RowID Data Level]
and I need to change the column type for the columns:
[RowID Table Level]
[RowID Data Level]
to integer, and set the column [RowID Table Level] as Identity (index) starting from 1, incrementing 1 each time.
What will be the right syntax using SQL SERVER 2000?
I am trying to solve the question in the link below:
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=2093921&SiteID=1
Thanks in advance,
Aldo.
I have tried the code below, but getting syntax error...
ALTER TABLE #CTE
ALTER COLUMN
[RowID Table Level] INT IDENTITY(1,1),
[RowID Data Level] INT;
I have also tried:
ALTER TABLE #CTE
MODIFY
[RowID Table Level] INT IDENTITY(1,1),
[RowID Data Level] INT;
Hello,In my web application I am listing steps of action:STEP ACTION10 10.1 10.210.910.1010.203030.1etcHow should I set up my columns in my database? I tryed decimal but the problem is that 10.1 and 10.10 is in theory the same while in my case it is absolutely not. I also tryed nvarchar but does not sort correctly.Should I create 2 int column, one for the main step and another one for the sub-step (one would contain the part before the "." and the other would contain the part after the ".")?Thanks
View 4 Replies View Relatedhi
i am trying to modify a column type from smallint to nvarchar(10), i am using the following script :
ALTER TABLE Addresses MODIFY [Floor] NVARCHAR(10)
i am getting :
Msg 102, Level 15, State 1, Line 3
Incorrect syntax near 'Floor'.
what is the problem with that?
Hello, I would like to get the columns in a table, this works fine:SELECT syscolumns.* FROM sysobjects INNER JOIN syscolumns ON sysobjects.id = syscolumns.id WHERE sysobjects.name = 'Customers'ORDER BY syscolumns.colidHowever, is there a way to get Column_Data_Type as for example "nchar" or "varchar" instead of having it as numbers.Can anybody help ?thanks
View 7 Replies View RelatedI need to stored lots of unsigned 32-bit values. (I'm actually storing IPv4 addresses). These values will frequently exceed 2^31 but never exceed 2^32
My options are:
Use bigint. This is undesirable since this wastes 32-bits of space for every value.
Use int and use the negative value range to get full 32-bits worth of data. In C, it is easy and fast to cast a signed -1 to an unsigned 2^32-1. In SQL, it will be more expensive: Must cast to 64-bit and if val < 0 then val = 2^32 + val.
Is there a better alternative?
Is there a fast (binary) way to cast a value > 2^31 to a negative signed value?
DECLARE @value BIGINT
SET @value = 3000000000
SELECT CONVERT(INT, @value) -- causes error
SELECT CAST(@value AS INT) -- causes error
This is an easy one , I need to know the way to check programatically for an SQL server 2000 column data type , if the result is a code , which codes are for the diferent datatypes ( varchar , text , smallint , etc ) , if you send me an url is ok.
thank you
I have a column in my table that is an Image (blob). The data storedin this blob is basically pdf files. I need a query to determine thetotal size of these blob's in the database. Here is what ishappening, if I run it as below I get 23736000 for a result.select sum(datalength (cast(document AS binary(8000)))) fromplan_reportIf I run it like this select sum(datalength (cast(document ASvarbinary(8000)))) from plan_reportI get 23736000 also as a resultIf I run it like this select sum(datalength (cast(document ASvarbinary))) from plan_reportI get 89010 this as a resultIf I run this: select datalength(document) from plan_report then Iget a result for each row and when I sum those rows I get 5584452854this as a result.I do not believe the first 3 queries are returning correct result setsdue to the limit on the fields (binary/varbinary) and since this is animage field I cannot convert to anything else.....I am out of ideas, and any help you can give me will be greatlyappreciated...
View 4 Replies View RelatedHello,Easy one for the SQL experts.I have a simple table. For the example let's say it looks like this:CREATE TABLE doc_exb ( column_a INT, column_b VARCHAR(20) NULL)Now I want to alter this table and make the column column_a a floatinstead of an INT.How do I do that? I cannot DROP and ADD the column I would lose somevery precious data.Thanks a lot
View 1 Replies View Relatedhi
is it possible to find a column's type inside stored procedure?? I am going to get the name of the table and then work with the columns and I just need the type of the column if I have had the name of it
regards
Hi,
I'm trying to figure out the best way to determine the data_type of a column, given the table name and column name. Once I've determined it's a charactor string I can get the length using COL_LENGTH, but I can't fund a command or procedure that will return the data type.
Thank you.
I was creating a table using MS SQL Server CE using Orcas development environment->Datasources interface. In the list of columns, I couldn't see column type 'Image'. Is there any way I can create a table in CE with column type as 'Image'?
How do I programatically change a column (say username) in a table (say tblusers) from varchar(25) to varchar(100)I am looking for something likealter tblusers set username as varchar(100) I know the above statement in nonsensical but it conveys the idea.
View 3 Replies View RelatedHi,How do we use like when we have a column of type TextSelect * from where myColumn LIKE 'prefix%'where myColumn is of type Text in SQL server 2005Thanks.
View 1 Replies View RelatedHELLO
i have an sql server database, with a table an some columns.
how can i get the data type of each column and the lengh define in the database table?
I want to change a column's data type from bit to int. There are data in the table already. I'm wondering if it is save/correct way to issue the following command to change the data type for that column.ALTER TABLE database_tableALTER COLUMN my_bit_column INT; Thanks.
View 1 Replies View RelatedHi, I want to add a newline in a content of sql column (using t-sql and not asp.net textbox) so when content is being rendered in a .net textbox I get separate rows, so insteadcol1 col2 col3 I woule like to havecol1col2col3Thanks
View 3 Replies View RelatedHello, I was wondering, how do I insert a file in an Image type column from the SQL server 2000 corporative administrator? I have a table that contains information about all the programs we run here, and I have a column that I set to image type, I want to put the icon of my programs there..
View 5 Replies View RelatedIs it ok/possible to use and * in a column that is NVARCHAR type?
View 4 Replies View RelatedHi,
How do we use like when we have a column of type Text
Select * from where myColumn LIKE 'prefix%'
where myColumn is of type Text in SQL server 2005
Thanks.
__________________
What is the way to rename a column in a table along with its datatype.
Thanks
Hello Experts,
Can any one tell me the query to modify the existing Column character length using QUERY?
can anyone help me figure out why when i run the following storedprocedure i get the error:(1460 row(s) affected)Msg 245, Level 16, State 1, Procedure SP_SALESTRENDS, Line 40Conversion failed when converting the varchar value 'X' to data typeint.SP:--STORED PROCEDURE FOR INVOICE TRENDS:--To use Stored Procedure use the following code:--EXEC SP_INSPECTIONSUMRY (MONTH), (OFFICE)--(OFFICE) CAN BE: BGR FOR BANGOR, SP FOR SOUTH PORTLAND, NH FOR NEWHAMPSHIRE, UNH FOR UNH--(REPORT) CAN BE: PRODUCT CODE FOR REPORT BROKEN OUT BY PRODUCT CODE-- EXEC SP_SALESTRENDS BGR, INVOICED, 2006, XALTER PROCEDURE SP_SALESTRENDS@OFFICE VARCHAR(30),@REPORT VARCHAR(30),@VARYEAR INT,@CODE VARCHAR(30)ASIF @REPORT='INVOICED'SELECT YEAR(I.INVOICEDAT) AS VARYEAR, MONTH(I.INVOICEDAT) AS VARMONTH,SUM(I.STOTAL) AMOUNT, P.PERSON, P.PRODUCT, C.DESCRIPTNINTO #TEMP_SALESTRENDSFROM OPENQUERY(PROJECTS, 'SELECT PROJECT, INVOICEDAT, STOTALFROM INVSUMYR') ILEFT JOIN(SELECT *FROM OPENQUERY(PROJECTS, 'SELECT NUMBER, PRODUCT, PERSONFROM PROJMAST')) PON (LTRIM(I.PROJECT)=LTRIM(P.NUMBER))LEFT JOIN(SELECT PC, DESCRIPTNFROM OPENQUERY(PROJECTS, 'SELECT PC, DESCRIPTNFROM PRODCODE')) CON (C.PC=P.PRODUCT)GROUP BY YEAR(I.INVOICEDAT), MONTH(I.INVOICEDAT), P.PERSON, P.PRODUCT,C.DESCRIPTNORDER BY VARYEAR, VARMONTH-- INVOICED REPORT BROKEN OUT BY OFFICEIF @REPORT='INVOICED' AND @CODE=1 AND @VARYEAR=1234 AND@OFFICE='NORRIS'SELECT VARYEAR , VARMONTH , SUM(AMOUNT) AS AMOUNTFROM #TEMP_SALESTRENDSGROUP BY VARYEAR, VARMONTHORDER BY VARYEAR, VARMONTHIF @REPORT='INVOICED' AND @CODE!=1 AND @VARYEAR=1234SELECT VARYEAR, VARMONTH, SUM(AMOUNT) AS AMOUNTFROM #TEMP_SALESTRENDSWHERE PRODUCT=@CODEGROUP BY VARYEAR, VARMONTHORDER BY VARYEAR, VARMONTHIF @REPORT='INVOICED'AND @CODE!=1 AND @VARYEAR!=1234SELECT VARYEAR , VARMONTH , SUM(AMOUNT) AS AMOUNTFROM #TEMP_SALESTRENDSWHERE PRODUCT=@CODE AND VARYEAR=@VARYEARGROUP BY VARYEAR, VARMONTHORDER BY VARYEAR, VARMONTHIF @REPORT='INVOICED' AND @OFFICE='NORRIS' AND @CODE=1 AND@VARYEAR!=1234SELECT VARYEAR , VARMONTH , SUM(AMOUNT) AS AMOUNTFROM #TEMP_SALESTRENDSWHERE VARYEAR=@VARYEARGROUP BY VARYEAR, VARMONTHORDER BY VARYEAR, VARMONTHIF @REPORT='INVOICED' AND @OFFICE='BGR' AND @CODE=1 AND @VARYEAR=1234SELECT VARYEAR , VARMONTH , SUM(AMOUNT) AS AMOUNTFROM #TEMP_SALESTRENDSWHERE PRODUCT IN ('G', 'H', 'I', 'J', 'K', 'L')GROUP BY VARYEAR, VARMONTHORDER BY VARYEAR, VARMONTHIF @REPORT='INVOICED' AND @OFFICE='BGR' AND @CODE=1 AND @VARYEAR!=1234SELECT VARYEAR , VARMONTH , SUM(AMOUNT) AS AMOUNTFROM #TEMP_SALESTRENDSWHERE PRODUCT IN ('G', 'H', 'I', 'J', 'K', 'L') AND VARYEAR=@VARYEARGROUP BY VARYEAR, VARMONTHORDER BY VARYEAR, VARMONTHIF @REPORT='INVOICED' AND @OFFICE='SP' AND @CODE=1 AND @VARYEAR=1234SELECT VARYEAR , VARMONTH , SUM(AMOUNT) AS AMOUNTFROM #TEMP_SALESTRENDSWHERE PRODUCT IN ('A', 'B', 'C', 'D', 'E', 'C', 'S', '3', '4')GROUP BY VARYEAR, VARMONTHORDER BY VARYEAR, VARMONTHIF @REPORT='INVOICED' AND @OFFICE='SP' AND @CODE=1 AND @VARYEAR!=1234SELECT VARYEAR , VARMONTH , SUM(AMOUNT) AS AMOUNTFROM #TEMP_SALESTRENDSWHERE PRODUCT IN ('A', 'B', 'C', 'D', 'E', 'C', 'S', '3', '4') ANDVARYEAR=@VARYEARGROUP BY VARYEAR, VARMONTHORDER BY VARYEAR, VARMONTHIF @REPORT='INVOICED' AND @OFFICE='NH' AND @CODE=1 AND @VARYEAR=1234SELECT VARYEAR , VARMONTH , SUM(AMOUNT) AS AMOUNTFROM #TEMP_SALESTRENDSWHERE PRODUCT IN ('W', 'X', 'Y', 'N', 'O', 'P')GROUP BY VARYEAR, VARMONTHORDER BY VARYEAR, VARMONTHIF @REPORT='INVOICED' AND @OFFICE='NH' AND @CODE=1 AND @VARYEAR!=1234SELECT VARYEAR , VARMONTH , SUM(AMOUNT) AS AMOUNTFROM #TEMP_SALESTRENDSWHERE PRODUCT IN ('W', 'X', 'Y', 'N', 'O', 'P') AND VARYEAR=@VARYEARGROUP BY VARYEAR, VARMONTHORDER BY VARYEAR, VARMONTHIF @REPORT='INVOICED' AND @OFFICE='UNH' AND @CODE=1 AND @VARYEAR=1234SELECT VARYEAR , VARMONTH , SUM(AMOUNT) AS AMOUNTFROM #TEMP_SALESTRENDSWHERE PRODUCT IN ('U', 'Z', 'R', 'V')GROUP BY VARYEAR, VARMONTHORDER BY VARYEAR, VARMONTHIF @REPORT='INVOICED' AND @OFFICE='UNH' AND @CODE=1 AND @VARYEAR!=1234SELECT VARYEAR , VARMONTH , SUM(AMOUNT) AS AMOUNTFROM #TEMP_SALESTRENDSWHERE PRODUCT IN ('U', 'Z', 'R', 'V') AND VARYEAR=@VARYEARGROUP BY VARYEAR, VARMONTHORDER BY VARYEAR, VARMONTH--END OF SALES TRENDS STORED PROCEDUREthanks.
View 4 Replies View RelatedHi,I want to update a column typed datetime. My statement is:update 'tablename' set Datum_Ende = '2007-12-17 08:49:04.000' where'columnID_name' = 23250 and 'columndate_Name' = convert(datetime,'17.12.2007 08:08:04')This effects an error. The Server said, the dateTime value is out ofvalid Domain.I have tried various statements like this and i think, the problem isthe blank between date and time.Can someone help me?ThanksThomas
View 2 Replies View Related
I'm trying to create a report where multiple currencies are rolled up into seperate subtotals. The currency type and amount are in seperate columns..
I'd like for my report to look like this
Account currency_type ammount
I'd like for the report to look like this
001 USD 100
001 USD 150
001 EUR 100
001 EUR 100
001 AUD 100
Total USD 250
EUR 200
AUD 100
Is there a way to do this?
I have xml string that needs to be stored in a field in the DB. I was looking for recommendations for the data type I can use in such a scenario.
View 1 Replies View RelatedHi
Can you please help me on this matter please?
I am trying to input UK(for example: 25/09/2007 ) format datetime in sql server. Is there any change that I can format my column to UK datetime. At the moment there is in US format(09/25/2007).
I have a table, one of the column has type datetime.
I use the insert command and the data i want to into is '25/09/2007'
It come back with error that the date is out of range. I change that to 09/09/2007 then it work.
The currently date and time format is MM/DD/YYYY.
I don't know how can i define the format to be DD/MM/YYYY
Thank you very much for your help
i really do appreciate that.
Best regards
Hi All
I want to retrieve the data type of table column and validate the input data whether same as data type of table column before insert into database. Any suggestion?
I use asp.net + msde
Thank you.
I can not insert CURRENT_TIMESTAMP into column type timestamp
I defined a data Table that has column type timestamp.
I did not achieve insert CURRENT_TIMESTAMP data into column typed timestamp.
My statement is below.What is wrong with it? Thanks
set @cmdS2 = 'Insert Into TABLOLAR Values(' + CHAR(39) + @TABLO + CHAR(39) + ',' + CHAR(39) + @TABLO_ACIKLAMASI + CHAR(39) + ',' + CHAR(39) + CURRENT_TIMESTAMP + CHAR(39) + ',' + CHAR(39) + @KLLNC + CHAR(39) + ')'
Let's say... the sqldatasource has 3 columns: TableKey(int), TableName(string) and StartDate(datetime) and i'm writing a method to return the data type based on the column name.. for example: GetDataType("StartDate") should return "datetime"...what should i do?
View 2 Replies View RelatedI have a table say Friend which has a column "IsSingle VARCHAR(10)" and this column has values like yes or No
Now I want to change type of column IsSingle from VARCHAR to BIT, if I try to do it manaually SQL throws error that cannot convert yes to bit etc.
I know that we can write a script to do this task but i dont know how ?
Any pointers,links, suggestions will help me to start with.
Thanks for your help.