Columns Not Showing On Local Host Reporting Services?
Jun 4, 2007
i created a layout in visual studio 2005 with the proper dimensions to print on an Avery 5160 label sheet (3 labels across and 10 down)
in the Body properties, i set Columns to 3, ColumnSpacing to 0.125", and Size 2.625" (W) & 1" (H).
i created a list table with a text box of the same dimension as the Size in the Body.
the thing is when i go to preview the report in visual studio, it just shows all the data but only in one column, but if i click the Print Layout button, it shows all 3 columns, then when i print it, it works! so i assumed that this was just the way visual studio handled the data. no big deal...
the problem is when i upload this to the reporting services on our local intranet and run it from the reporting services, it shows only one column (the left most only) and prints that way too; it's almost like i need a Print Layout button on the reporting services (which there isn't one).
is there something that i need to set so that it will print in 3-column form from the reporting services so people can print on label sheets?
i hope this makes sense. also, i tested this on the same printer just to make sure it wasn't hardware.
I installed SQL reporting services 2005 and successfully configured reporting services.After designing the report using Bussiness Intelligence Studio, i tried to deploy my reporting services application to the localhost , I got the below mentioned error :
TITLE: Microsoft Report Designer ------------------------------
A connection could not be made to the report server http://localhost/ReportServer.
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. (Microsoft.ReportingServices.Designer)
------------------------------
The request failed with HTTP status 404: Not Found. (Microsoft.ReportingServices.Designer)
We have a 64-bit VM server running SQL Server 2005. The SQL Server on this particular VM server has 6 local instances installed. On the Management Studio logon screen I can type the full name of the local instance and connect to it, however if I press the drop down in the Server name field, choose Browse and select the Local Servers tab there is nothing listed under Database Engines.
Any idea why the 6 local instances don't show up under Database Engines? This is preventing me from installing a vendor application because their installer looks for local SQL Server instances on this server, but if SQL Server won't even show the local instances then the installer doesn't see them either.
I downloaded and installed SQL Server 2005 SP2 update on my reporting services server. I think downloaded and installed the share point reporting services admin to my share point dev server. I open up the central administration and there is no reporting services menu option under the Application menu. The sharepoint server is a farm with backend database on one server and all the web apps on the other (where the add-in was installed). The reporting server is a separate server running its own instance of SQL 2005.
I have been using this query inside the package that I created to load data into cube. From this cube I am fetching records for my cascaded parameterized report. The issue here is one of the employee is showing under different team manager and site manager. This team manager has left the company and now the employee is back to its previous team manager. here is the code:
Truncate table CallCenterEmployee.dbo.tblCube_Staff; GO Insert Into CallCenterEmployee.dbo.tblCube_Staff SELECT Â Â dbo.tblStaff.Emp_N , CONVERT(varchar, dbo.tblStaff.Emp_N) + CONVERT(varchar, tblDate.ID) AS SurrogateKey , dbo.tblStaff.StaffId , dbo.tblStaff.First_M , dbo.tblStaff.Last_M
In the report, I am using Format(field,"dd-MMM-yyyy"), but somehow the result comes out recognizing my month as day and my day as month. How do I fix this?
ie. my report date is 11/06/2015, the result shows 11-Jun-2015 instead of 06-Nov-2015.
I am trying to get 3 report parameters working to show 3 different tables.
table 1 = Area 1 data table 2 = Regional Area 1Â table 3 = Stores in Regional Area 1
Currently I am working on the biggest one. E.g. if all 3 parameters have information in them, then you use table 3. I have written out the coding as the following
=iif(isnothing(Parameters!Area.Value),True, False ) and iif(isnothing(Parameters!Regional.Value),True, False ) and iif(isnothing(Parameters!store.Value),True,False)
But it errors stating end of statement expected. Â What I have missed or not done here?Â
I have previously installed SQL Server 2005 Client tools on my machine (XP Professional). When I launch Visual Studio 2005 and go to create a new project, I can see all of the Business Intelligence Templates (i.e. Report Server Project, Integration Services Project, etc).
I recently installed Visual Studio 2008. When I go to create a new project in VS2008, none of the Business Intelligence templates appear.
How would I go about getting these BI Templates to appear so that I can create new Report Services projects in VS2008?
I installed RS 2005, SP1 and then the rollup fix 2153 however; if I run http://server/reportserver or view the reportserver log file, it shows version 2047 which is the SP1 version. I have added the tail end of the rollup hotfix log file which shows I have installed it.
Is this a known issue?
06/14/2006 16:03:57.153 Failed to read version information for the following file: C:Program FilesMicrosoft SQL ServerMSSQL.1Reporting ServicesReportServerCatalog.sql 06/14/2006 16:03:57.169 Failed to read version information for the following file: C:Program FilesMicrosoft SQL ServerMSSQL.1Reporting ServicesReportServerStylesHtmlViewer.css 06/14/2006 16:03:58.216 Attempting to install file: sqlrun_rs.msp 06/14/2006 16:03:58.263 Attempting to install file: \NLDN9577DWWd$89a527f93aa2bb044103hotfixrsFilessqlrun_rs.msp 06/14/2006 16:03:58.278 Creating MSP install log file at: C:WINDOWSHotfixRS9LogsRS9_Hotfix_KB918222_sqlrun_rs.msp.log 06/14/2006 16:03:58.294 Successfully opened registry key: SoftwarePoliciesMicrosoftWindowsInstaller 06/14/2006 16:03:58.294 Failed to read registry key: Debug 06/14/2006 16:04:44.826 MSP returned 0: The action completed successfully. 06/14/2006 16:04:45.092 Successfully opened registry key: SoftwarePoliciesMicrosoftWindowsInstaller 06/14/2006 16:04:45.107 Failed to read registry key: Debug 06/14/2006 16:04:45.123 Successfully installed file: \NLDN9577DWWd$89a527f93aa2bb044103hotfixrsFilessqlrun_rs.msp 06/14/2006 16:04:45.139 Restarting RS Service ReportServer since it was previously running 06/14/2006 16:04:45.154 Attempting to start service: ReportServer 06/14/2006 16:04:51.936 Successfully started service: ReportServer 06/14/2006 16:04:51.983 Successfully installed target: NLDN9577DWW 06/14/2006 16:04:51.998 Successfully installed instance: MSSQLSERVER 06/14/2006 16:04:52.014 Successfully opened registry key: SoftwareMicrosoftWindowsCurrentVersionUninstall 06/14/2006 16:04:52.608 06/14/2006 16:04:52.623 Product Status Summary: 06/14/2006 16:04:52.639 Product: SQL Server Reporting Services 2005 06/14/2006 16:04:52.701 MSSQLSERVER - Success 06/14/2006 16:04:52.717 06/14/2006 16:06:05.500 Hotfix package closed
I have a date range parameters in my report, and when viewing it using IE and Firefox ReportViewer, the date picker is there. But when I tried running it using Chrome, the date picker was missing. I tried double click on the date field itself but nothing.
My Chrome version is 17.0.963.79 m. I tried allowing the pop-up blocker but still nothing.
We have a SSRS report that runs on snapshots. The report contains a textbox that displays the report name using the Global!ReportName built-in field.Â
Recently, we changed the RDL name to something else but this seems to have affected the snapshots too. The older snapshots (generated before the name change) are showing the updated name.
Just wondering if there is some way to say that the snapshot will show the report name based on the time it was generated (same as the ExecutionTime built-in field). Why is there a difference?
I am new to matrixes and I have created a dataset which I would like to populate into an expanding / collapsing matrix.
The purpose of the report is to show a list of pallets and their respective stock adjustments. I have laid the matrix out as follows...
I have spent the entire afternoon playing around with this and searching Google, but as yet, I have been unable to get the matrix to display more than 1 record per pallet. Each of the pallets below have multiple adjustment records, yet the report will only display the first one...  If I assign the dataset to a table, it displays as expected.
I installed Reporting Services Add-in for Sharepoint 2007, on my Server where i have both Sharepoint 2007 and SQL Server 2005 and report Server are installed, i already installed SQL Server SP2, but in SharePoint 3.0 Central Administration under Application Management Reporting Services section is not Showing.
Please let me know if anybody has the got the same issue and fix it.
Presently I have a main report and subreport, with the subreport having values for a carbon copy contact, which when it is displayed it shows these values:  Peter Piper    #Error    #Error   peterpiper@mycompany.com    #Error Donald Duck   #Error    #Error   donaldduck@mycompany.com   #Error etc.  When I run the subreport directly, it correctly returns all the values:  Peter Piper    123-345-6789    Calgary   peterpiper@mycompany.com    T Donald Duck   987-654-3210    Calgary  donaldduck@mycompany.com   F  Here are the details on SQL Server 2008:  Microsoft SQL Server 2008 (SP2) - 10.0.4064.0 (X64)  Feb 25 2011 13:56:11  Copyright (c) 1988-2008 Microsoft Corporation  Standard Edition (64-bit) on Windows NT 6.0 <X64> (Build 6002: Service Pack 2)  why the #Error is showing up the the main report?
I created a re port using the Report builder. The report runs fine. I want to create a parameter on the report. I created a new dataset with the query "select distinct dept from table" . Then i created a new parameter to get the values from the second dataset. After running the reports when i selected 2 departemnts, its still showing all the records.
Below is the table and the highlighted column i am trying to hide just for those two fields. The table has a page break so that it would be displayed on a different page for each value, but i'm not sure it is possible as i have only done it for integers and rows before.
we have an isseu with 2 reports the are not showing in internet explorer when the client is connected by VPN Cisco Client.  The same reports work fine when they are at the office not using the VPN. We have this error in the report server log.
y!ReportServer_0-744!2e80!07/29/2015-07:16:59:: i INFO: RenderForNewSession('/Ventes - Sales/Rapport des directeurs - Directors' report (Last Period)') webserver!ReportServer_0-744!2e80!07/29/2015-07:18:15:: i INFO: Processed report. Report='/Ventes - Sales/Rapport des directeurs - Directors' report (Last Period)', Stream='' rshost!rshost!73c!07/29/2015-07:18:15:: e ERROR: WriteCallback(): failed to write in write callback. rshost!rshost!73c!07/29/2015-07:18:15:: e ERROR: Failed with win32 error 0x03E3, pipeline=0x00000000036EA760.
I have a scatter chart in SSRS (SQL Server 2012, Visual Studio 2010) that is producing the following:
There are five data points on there, however the result set I am using has 10 rows (a 'Completed Date' of datetime and a 'Lateness' integer whose values can be positive or negative.
This is the Dataset and the results it produces:
SELECT DISTINCT TOP 10 a.ACTIVITY_NAME As [Activity Name] , ad.COMPLETED_DATE As [Completed Date] , ad.DAYS_LATE As [Lateness] FROM ACTIVITIES a JOIN ACTIVITY_DATA ad ON ad.ACTIVITY_ID = a.ACTIVITY_ID
[code]....
How can I tell SSRS to show every data point in my chart?
Hello Everyone. I recently installed MS Sql Server 2005 and Reporting services on a dedicated server. My report server database and my content databases (report content) are all mounted on a named instance of SQL (on the local machine). When I attempt to run a report via the web based report manager I get the following error message.
An error has occurred during report processing. Cannot create a connection to data source 'Production'. The feature: "The edition of Reporting Services that you are using requires that you use local SQL Server relational databases for report data sources and the report server database." is not supported in this edition of Reporting Services.
The data source production has a connection string with the Data Source element set to the named instance of SQL running on the local machine. The report manager web application is also running on the same machine.
All databases are on the local machine (SERVER217MSSQL2K5WG). The version of reporting services installed is what shipped with the Workgroup edition of SQL Server 2005. Does anyone know what could be causing this error? I can assure you all of the data is on the local machine.
I have a page that connects to SQL server. It works fine when running in local host but when I publish to the server, I get the following: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) Any ideas on where to start? Thanks,Mark
I am new to SQL Server 2005 Reporting Services and I€™m having problems starting the service. I am running a Windows XP SP2 with SQL Server 2005 and reporting services but the service will not start. My SQL Server instance logs on using €˜Windows Authentication€™ using a username sysadm with no password
I have installed IIS and made sure that ASP.net is running.
I have opened up the Report Services Configuration Manager and amended the settings but I€™m unable to get the service started!!!
Theses are my settings
i) Report Server Virtual Directory OK Name: ReportServer1 Website: Default Web Site
ii) Report Manager Virtual Directory Name: Reports1 Website: Default Web Site
iii) Windows Service Identity Service name: ReportServer Service Account: NT AuthorityLocal Service
Iv Web Service Identity (NOT WORKING)
v) Database Setup Servername €“ Nameofmyserver Database name - ReportServer1 Credential Type Server Credentials
When I click on start no error message appears, it just seems to time out.
I have a local report for which i am binding the Dataset dynamically. I am trying to print this report using a seperate button on the page. I saw in the forums saying that the reportviewer can be converted to an EMF file, bind this to an image control and can Print this image using Javascript.
Can anyone help me with the sample code to print local report from the reportviewer (it may be in any approach.)
I have a application which uses the automatic asp.net membership stuff to make it work. (In app_data). It works fine on local host, but when I use it on the web server I get the error message (after clicking the log in button):An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) Please help me fix this. Thank you for your help,Sam
hi my local host cannot open the connection to my database, whilst testing with vwd seems to be able to do this? other server side functions work (response.write("hello world")) in my iis the version of .net it says its running reads: 2.0.50727, though when i go to add / remove programmes i have 3.5 there? maybe its nothing to do with .net versions? thanks in advance for your help pete
I think I've seen a similar post on a blog or on the forums - but it seems like this should be possible -
I have an MDX query - that works fine in SQL Enterprise Manager, and has my dimension members on columns, and my measures on the rows. When I try the same query in Reporting Services, I get the error:
"The query cannot be prepared: The query must have at least one axis. The first axis of the query should not have multiple hierarchies, nor should it reference any dimension other than the Measures dimension.. Parameter name: mdx (MDXQueryGenerator)"
Although it works when you pivot the view, I really need my data presented with the members on the columns and the measures on the rows. Another forum post mentioned using the SQL 9.0 driver, but I can't see this listed anywhere (the only one I see is the .NET framework Data Provider for Microsoft Analysis Services).
Here's what my query looks like -
SELECT { [Time].[Month].&[2006-09-01T00:00:00] , [Time].[Month].&[2006-10-01T00:00:00], [Time].[Month].&[2006-11-01T00:00:00], [Time].[Month].&[2006-12-01T00:00:00] } on COLUMNS, { [Measures].[Unique Users], [Measures].[UU Pct 1], [Measures].[UU Pct 2], } ON ROWS FROM [Cube]
I think I might have left the domain name blank when I installed this. Is there anyway to enter one later. I have tried to change this through add/remove programs and do not get a chance to change this field
Thanks! Terry Beckman
<Header> <Product>Microsoft SQL Server Reporting Services Version 9.00.1399.00</Product> <Locale>en-US</Locale> <TimeZone>Central Standard Time</TimeZone> <Path>C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFilesReportServerService__main_01_31_2008_08_18_22.log</Path> <SystemName>JPADESKTOP1</SystemName> <OSName>Microsoft Windows NT 5.1.2600 Service Pack 2</OSName> <OSVersion>5.1.2600.131072</OSVersion> </Header> ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing ConnectionType to '0' as specified in Configuration file. ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file. ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file. ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file. ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file. ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file. ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file. ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file. ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file. ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file. ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file. ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file. ReportingServicesService!configmanager!4!1/31/2008-08:18:22:: w WARN: WebServiceAccount is not specified in the config file. Using default: JPADESKTOP1ASPNET ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file. ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file. ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file. ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file. ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file. ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file. ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file. ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file. ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file. ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file. ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration file. ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file. ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file. ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file. ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file. ReportingServicesService!servicecontroller!9!1/31/2008-08:18:23:: Total Physical memory: 1055309824 ReportingServicesService!library!4!1/31/2008-08:18:23:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.UnknownUserNameException: The user or group name 'JPADESKTOP1ASPNET' is not recognized., ; Info: Microsoft.ReportingServices.Diagnostics.Utilities.UnknownUserNameException: The user or group name 'JPADESKTOP1ASPNET' is not recognized. ReportingServicesService!servicecontroller!4!1/31/2008-08:18:23:: e ERROR: Exception caught starting RPC server: Microsoft.ReportingServices.Diagnostics.Utilities.UnknownUserNameException: The user or group name 'JPADESKTOP1ASPNET' is not recognized. at Microsoft.ReportingServices.Library.Native.NameToSid(String name) at Microsoft.ReportingServices.Library.ServiceAppDomainController.StartRPCServer(Boolean firstTime)
ExecutionTime gives server time, How can I get local time ? I'm planning to create a report part and use it across all the reports to display report execution time.
- Reports are being opened in Citrix -MS SQL Server 2008 R2
I am making a book-like report, I am using a report that has a header and calling a sub-report that has it's own header. However the sub-report header is not showing on the parent report. Parent report header is prevailing over the sub-report. Is it possible to have both headers displaying?
I have a report with multiple tables. I need to show each tables in different pages. When there is no data for tables/tables , it is coming with the next table which has data. I have given "Add a page break after" option in the tablix but still the tables are coming together when no data available. How can I show it in different page?
I have an ASP.NET application that runs under the development server. Before deploying to my host I wanted to test it under IIS. I set up a virtual directory under IIS, but when I try to open the home page I get an error Unable to open the physical file "E:CDiskLocalWebSitesDIWSchedulingApp_DataDIWDB.MDF". Operating system error 5: "5(Access is denied.)".and a code dump showing that the code is breaking at the open connection. A little research on the error indicates that IIS does not have permission to execute the database operation. I can not find any information on how to give IIS this permission in SQL Server 2005 Express. Any guidance would be appreciated.
