Plesae tell me the MSSQL Server equivalent of the below MySQL query .
create table temp2(a varchar(23) comment 'male m');
What is the use of specifying a keyword 'comment' in the column definition. Will it make any difference
Hi
i have a comment column which is varchar(200). when a user types any say for example a couple of small paragraph with commas , colon, hard enter key.
when i run a select statement and save it to csv file and then open with excel, if the comments has comma then i get these info in separate column and if there is hard enter key then it goes into new line.
Is there a way to get these info in one column
Thanks,
Have many views based on legacy tables that have different table and column names. Want to create a table that shows view table / column and underlying table column, e.g.
CREATE VIEW [dbo].[Branch]
AS
SELECT
divbra_id BranchID,
cmpny_id CompanyID,
divbra_cde BranchCode,
divbra_nme BranchName
FROM MyDatabase.dbo.divbranc
GO
is an existing view. I want to pull out the following metadata:
divbranc divbra_id Branch BranchID
divbranc cmpny_id Branch CompanyID
divbranc divbra_cde Branch BranchCode
divbranc divbra_nme Branch BranchName
Is there anyway to get this from SQL metadata without actually parsing the view SELECT statement in code?
When I set a column to have a default definition that uses a UDF, I am receiving the "String or binary data would be truncated" error.
The UDF:
Code BlockALTER FUNCTION GetDefaultClientTier
(
@ClientAssets decimal(15,2)
)
RETURNS char(1)
AS
BEGIN
DECLARE @Result char(1)
-- Get the first result in case of overlaps.
SET @Result = CAST((SELECT TOP 1 ClientTier FROM ClientTiers WHERE @ClientAssets BETWEEN ClientAssetsFloor AND ClientAssetsCeiling) AS char(1))
RETURN @Result
END
ClientTier is defined as char(1) in the table. I simply have (isnull([dbo].[GetDefaultClientTier]([ClientAssets])),(null))) as the definition. I can't use a computed column because I the values need to be editable. When inserting with SSIS, the insert works fine but the column has a value of null for each row.
When putting a character as the default (like 'A') the insert works fine.
The cast is there only because I have tried everything I can think of to get around this.
Is there something simple I am overlooking?
(SQL2005 SP2)
Thanks!
I have a table names Alert_Event and a new column named BSP_Phone has been added to the table. I am trying to set NULL values to the column and I get the below error. I am setting null values in the bolded text in the query.
Error Message:
Msg 213, Level 16, State 1, Procedure SaveBSPOutageInfo, Line 22
Column name or number of supplied values does not match table definition.USE [gg]
GO
/****** Object: StoredProcedure [dbo].[SaveBSPOutageInfo] Script Date: 10/17/2013 19:01:20 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[SaveBSPOutageInfo] @eventCreatedDate DATETIME, @eventOrigin varchar(10),
[code]....
I have two tables (i.e. Table1 and Table2).
SELECT
* FROM [dbo].[Table1]
Date
id
9/15/2015
[code]...
Table2 has three columns (i.e. Date, Count and Rule Type). Column “Rule Type “has a default value which is “XYZ”..Now I want to insert Data from Table1 to Table2. I am using following query:-
declare @Startdate
datetime
DEclare @enddate
datetime
[code]...
Column name or number of supplied values does not match table definition.I am using SQL 2012. I understand Table1 has 2 Columns but Table2 has 3 Columns. Is there anyway, I can move data from source table to Destination table where Destination Table has more number of Columns?
I'm executing a stored procedure but got error :
Msg 213, Level 16, State 1, Procedure ExtSales, Line 182
Column name or number of supplied values does not match table definition.
Hi,
Is there a way of uploading column definitions from the Flat File Connection Manager into a SQL Server table definition. Since I have over a dozen data sources to process each with around 200 columns and of course like many BI techies I have little immediate influence over the structure of these flat files. I just know that these data sources are business critical.
Judging by looking at similar threads I can't be the only one who would greatly benefit from being able to upload column definitions from the Flat File Connection Manager into a SQL Server table definition as opposed to doing this manually.
Thanks in advance,
Kieran.
Hello,
I am receiving the following error:
Column name or number of supplied values does not match table definition
I am trying to insert values into a temp table, using values from the table I copied the structure from, like this:
SELECT TOP 1 * INTO #tbl_User_Temp FROM tbl_User
TRUNCATE TABLE #tbl_User_Temp
INSERT INTO #tbl_User_Temp EXECUTE UserPersist_GetUserByCriteria @Gender = 'Male', @Culture = 'en-GB'
The SP UserPersist_GetByCriteria does a
"SELECT * FROM tbl_User WHERE gender = @Gender AND culture = @Culture",
so why am I receiving this error when both tables have the same
structure?
The error is being reported as coming from UserPersist_GetByCriteria on the "SELECT * FROM tbl_User" line.
Thanks,
Greg.
Is there a way to avoid entering column names in the excel template for me to create an excel file froma dynamic excel using openrowset.
I have teh following code but it works fien when column names are given ahead of time.
If I remove the column names from the template and just to Select * from the table and Select * from sheet1 then it tells me that column names donot match.
Server: Msg 213, Level 16, State 5, Line 1Insert Error: Column name or number of supplied values does not match table definition.
here is my code...
SET @sql1='select * from table1'SET @sql2='select * from table2'
IF @File_Name = '' Select @fn = 'C:Test1.xls' ELSE Select @fn = 'C:' + @File_Name + '.xls' -- FileCopy command string formation SELECT @Cmd = 'Copy C:TestTemplate1.xls ' + @fn
-- FielCopy command execution through Shell Command EXEC MASTER..XP_CMDSHELL @cmd, NO_OUTPUT -- Mentioning the OLEDB Rpovider and excel destination filename set @provider = 'Microsoft.Jet.OLEDB.4.0' set @ExcelString = 'Excel 8.0;HDR=yes;Database=' + @fn
exec('insert into OPENrowset(''' + @provider + ''',''' + @ExcelString + ''',''SELECT * FROM [Sheet1$]'') '+ @sql1 + '') exec('insert into OPENrowset(''' + @provider + ''',''' + @ExcelString + ''',''SELECT * FROM [Sheet2$]'') '+ @sql2 + ' ')
Hey guys,
I have a Access adp that backs onto SQL Server 2005, its taken a while but tis nearly done.
Just one last thing to figure out.. and thats how to send a email. I had a look at all the Access ways and they just wont work out for this.
So I decided to use the server to send them, I would insert/update a row into a table which has a trigger on it.
The table has amoung other things a Approved and Declined column.
Both at 0 Sends an email to an Approver
App 1 Dec 0 Sends on further
and App 0 Dec 1 sends back to the original sender.
All I really want to know is could a trigger execute a package or something that will send the email? (Yes thats right someone isnt asking for code for once:D meh must be winter in hell)
If theres any flaws in my idea please feel free to tell me (Saves me denting the desk with my head half a week and 10 pages of code from now)
And where do I create triggers:P (Will probly have found this one in BOL by the time anyone replys)
Sorry about this but I really have no clue about triggers.. seems the site doesnt like me searching for triggers
'This page was generated in 17.03 seconds.'
:P
Hai friendsCould u pleas give me some noites on replication . I worked out thruwizards but not succeded.With thanksRaghu
View 1 Replies View RelatedHello,
can I create a comment for a table in SQL Server 2005? For a column I can create a comment in the description-field.
finchen
I want to get the latest comment for each id based on the maximum createdDate and not sure how to do this, tried to do Max but it was still returning all the rows.
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[Audit](
[id] [nvarchar](64) NOT NULL,
[Code] ....
I have looked everywhere for an answer for this one, so if it's out there and I've missed it, sorry.
I want to include a list of instructions with a report that I am sending out to a list of subscribers (not Data Driven, each is an individual subscription). It seems no matter how I enter the text in the Comments box, the body of the email comes out as a continuous stream of text with no line breaks, which is difficult for the recipients to read.
Is there a way to embed line breaks as a minimum, but preferrably additional formatting, in a subscription comment?
Thanks
Trevor
Hi,
Can any tell me how to check whether any Comment been entered in a Cell in the Excel Sheet?
It is pretty urgent. Solutions are greatly appreciable.
Thanks & Regards,
Prakash Srinivasan.
The following sql works great when the field for my main blog message is type nvarchar but doesn't work for text which I need to convert to.
select
a.id, b.textField
count(b.a_id) as myCount
from a left join b on a.id = b.a_id
group by a.id, b.textField
What other methods could i use to get "myCount" within one sql statement?
Thanks in advance, Jeff
inserted a record with an identity field
I had a '-- comment' right
Select @data = @@identity
This select failed - @data was NULL
I changed it to SET @data = @@identity
This also failed @data was null
I then change to the follow which worked - Why would the different form of a
comment make a difference? I was the only one in the database, there were no
other changes. I could make the logic block fail or succed by just changing
the comment syntax.
inserted a record with an identity field
I had a '/** comment**/' right
Select @data = @@identity
Hi there gurus, can you please add your 2 cents on this design? We'rehaving trouble relating these tables in a diagram because of the keys.Is it necesary to have the references setup? I would assume yes so theforign keys can be setup.If you look at this link, you'll see our diagram. In Red are therelationships that we would like to make for referential integrity, butcannot because of the keys.http://rullo.ca/linktome/QuestionsDB.jpgOur goal in all of this is to have a facility wherin we can store aquestion, that has multiple names over multiple Languages. Forinstance:-Q1| QNameID = 1 | "Do you have a dog in your appartment?" | LangID =1(eng)-Q1| QNameID = 2 | "Do you have a dog in your house?" | LangID =1(eng)-Q1| QNameID = 1 | "-French - Do you have a chien in your appartment?"| LangID = 2(fr)-Q1| QNameID = 2 | "-French - Do you have a chien in your house?" |LangID = 2(fr)The difficulty is when we try and put this in the group details table.We don't want to outline the Language, we'd just pass the language intoa proc to retreive a specific group with a specific language. If youfolks would be so kind as to add your comments to the design I would betruely grateful.CREATE TABLE [Question] ([QuestionID] [int] NOT NULL ,[SystemName] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NOTNULL ,CONSTRAINT [PK_Question] PRIMARY KEY CLUSTERED([QuestionID]) ON [PRIMARY]) ON [PRIMARY]GOCREATE TABLE [QuestionAnswer] ([QuestionID] [int] NOT NULL ,[QuestionAnswerID] [int] NOT NULL ,[SystemName] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NOTNULL ,CONSTRAINT [PK_QuestionAnswer] PRIMARY KEY CLUSTERED([QuestionID],[QuestionAnswerID]) ON [PRIMARY] ,CONSTRAINT [FK_QuestionAnswer_Question] FOREIGN KEY([QuestionID]) REFERENCES [Question] ([QuestionID])) ON [PRIMARY]GOCREATE TABLE [QuestionAnswerName] ([QuestionAnswerID] [int] NOT NULL ,[QuestionAnswerNameID] [int] NOT NULL ,[LanguageID] [int] NOT NULL ,[Name] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,CONSTRAINT [PK_QuestionAnswerName] PRIMARY KEY CLUSTERED([QuestionAnswerID],[QuestionAnswerNameID],[LanguageID]) ON [PRIMARY]) ON [PRIMARY]GOCREATE TABLE [QuestionGroup] ([QuestionGroupID] [int] NOT NULL ,[Name] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,CONSTRAINT [PK_QuestionGroup] PRIMARY KEY CLUSTERED([QuestionGroupID]) ON [PRIMARY]) ON [PRIMARY]GOCREATE TABLE [QuestionGroupDetails] ([QuestionGroupID] [int] NOT NULL ,[QuestionNameID] [int] NOT NULL ,[QuestionAnswerNameID] [int] NOT NULL ,[QuestionSortOrder] [int] NULL ,[AnswerSortOrder] [nchar] (10) COLLATE SQL_Latin1_General_CP1_CI_ASNULL ,[DisplayLevel] [int] NULL ,CONSTRAINT [PK_QuestionGroupDetails] PRIMARY KEY CLUSTERED([QuestionGroupID],[QuestionNameID],[QuestionAnswerNameID]) ON [PRIMARY] ,CONSTRAINT [FK_QuestionGroupDetails_QuestionGroup1] FOREIGN KEY([QuestionGroupID]) REFERENCES [QuestionGroup] ([QuestionGroupID])) ON [PRIMARY]GOCREATE TABLE [QuestionNames] ([QuestionID] [int] NOT NULL ,[QuestionNameID] [int] NOT NULL ,[LanguageID] [int] NOT NULL ,[Name] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,[Desciption] [nchar] (10) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[ControlTypeID] [uniqueidentifier] NOT NULL ,CONSTRAINT [PK_QuestionNames] PRIMARY KEY CLUSTERED([QuestionID],[QuestionNameID],[LanguageID]) ON [PRIMARY] ,CONSTRAINT [FK_QuestionNames_Question] FOREIGN KEY([QuestionID]) REFERENCES [Question] ([QuestionID])) ON [PRIMARY]GO
View 1 Replies View RelatedI am setting up a data driven subscription to send out an email which includes a report. The Sql for the data driven subscription outputs the EmailTo, Subject, Comment(Body) and some report parameters. My issue is with the Comment (Body) field which I would like to format with CR/LF to make the email body look neat and readable. I've tried many different permutations of inserting the CR/LF, From concatenating Char(13) + Char(10) in which the email does recognize the Cr/LF to concatenating binary 0x0D + 0x0A which after the first concatenation of binary nothing else can be concatenated. Here is the code I've tried:
---~~~~~~~~
declare @iEndDate datetime
set @iEndDate = dbo.fn_today()
Declare @Account_group int
Set @Account_group = 999
/*
DECLARE @mybin1 binary(5), @mybin2 binary(5)
SET @mybin1 = 0x0D
SET @mybin2 = 0x0A
*/
Declare @CrLf VarChar(5)
set @CrLf = CHAR(13) + CHAR(10)
Declare @Str1 VarChar(255)
Declare @Str2 VarChar(255)
Declare @Str3 VarChar(255)
Declare @Str4 VarChar(255)
Declare @Str5 VarChar(255)
Declare @Str6 VarChar(255)
Declare @Str7 VarChar(255)
Declare @Str8 VarChar(255)
Declare @Str9 VarChar(255)
Set @Str1 = 'Good Morning,'
Set @Str2 = 'We are exposed by '
Set @Str3 = 'Attached please find the margin call detail.'
Set @Str4 = 'Please let us know if you have any questions.'
Set @Str5 = 'Thank you.'
Set @Str6 = 'Please respond to:'
Set @Str7 = ''
Set @Str8 = ''
Set @Str9 = ''
declare @t table
(
EmailTo VarChar(255),
ReplyTo VarChar(255),
Subject VarChar(255),
Comment Text,
Account_group Int,
Trading_Account_Id Int,
Broker_Code_Ky VarChar(255),
EndDate Datetime
)
insert into @t
select
EmailTo = '', -- isnull(bf.firm_email,''),
ReplyTo = '',
Subject = 'Margin Call Notice: - ' + Trading_account_name + ' - Exposure: ' + '$' + Convert(varchar(20), convert(Money, Mark_amount),1) ,
Comment = @Str1 + @CrLf + @CrLf + @Str2 + '$' + Convert(varchar(20), convert(Money, Mark_amount),1) + '.' + @CrLf + @CrLf + @Str3 + @CrLf + @CrLf + @Str4 + @CrLf + @CrLf + @Str5 + @CrLf + @CrLf + @Str6 + @CrLf + @Str7+ @CrLf + @Str8 + @CrLf + @Str9,
Account_group = @Account_group,
Trading_Account_Id = trading_account_Id,
Broker_Code_Ky = EGS.Broker_Code_Ky,
EndDate = @iEndDate
from fni_ExposureGovernmentSummary (@iEndDate) EGS
join broker_group bg
on EGS.broker_code_ky = bg.broker_code_ky
Join broker_firm bf
on bg.fbe_firm_id = bf.broker_firm_id
Order by
Broker_Group_Name,
Trading_account_Name
select top 2 * from @t
--~~~~~~~~~~~~~
The Email my company is using is Lotus Notes.
The Question is how do I code the the Comment field so that my email will recognize the Cr/LF.
Thanks
Elias
Hi, experts,
How can we add comment which only appears on the first page of the report?
I am looking forward to hearing from you for your help and thanks a lot in advance.
With kindest regards,
Yours sincerely,
Hi all,
I have a report where I have to display State, Category Name and the text. Below is the sample report
State Category Name Text
TX Unanticipated High NT due to RADD clean up- drive replacement.
NJ Unanticipated SAR efforts (SEM configuration)
But now my question is if there is no comment in any other state I would like to show no comment in the text line. Is there any formula I can use in the report level that will take care of the issue. I know in Business object there is a formula you can create which is =If (IsNull([Text]);"No Comments Reported";[Text]). I need to know in ssrs there is something.
please let me know ASAP and the steps of doing that.
Thanks
Rozarm02
We just encountered an odd failure in ADODB. If it gets an SQL query with a comment embedded in it, and the comment has an apostrophe as one of the characters, ADODB gets confused as it tries to plug in parameters for placeholders later in the query. For example:
SELECT id, name
FROM doc_type /* this won't work! */
WHERE name LIKE ?
If you take out the apostrophe ("this will not work!") or move the comment to follow the placeholder, the query works.
Is this a known bug (couldn't find it in the KB)?
Thanks,
Bob Kline
I am running SQL Server 2005 SP2 and I am getting an SQL error due to the server not recognizing the "--" as a comment. (I am using the 32-bit version) The same code runs on SQL Server 2000 with no problem.
Is there a setting to correct this? Do I need to install the cumulative update pkg 3 to correct this problem?
My God! What happens if I miss a step, or put it in a different order??? I know I can specify ORDER BY StepID, but what about a missing step? I do have "missing ranges" script, but posting questions filtered through the script process may become a full-time job in itself...What to do, what to do...
View 14 Replies View RelatedHi,Is there anyone encountered this error before & how it is being resolved?[Microsoft][ODBC SQL Server Driver][SQL Server]Missing end comment mark '*/'The error pops-up when I was running a DTS Import/Export from a SQL server(source) to another SQL server (destination) residing on a differentmachine. I'm copying all tables, views, & stored procedures of a database.Thanks for any input.Regards,Maricel
View 1 Replies View RelatedI have a field that contains some text. Each field will have none or atleast one comment in it. A comment can be a string of any length with *** on both sides. Ex: ***comment***
Declare @Test_tbl Table(TextField Text)
Insert Into @Test_tbl
Select 'Some text ***comment*** some more text' Union all
Select 'Other text ***another comment*** more and more text' Union all
Select '***Comment*** some text ***More Comments***' Union all
Select 'some text with no comment'
I need the output be ...
TextField
--------------
Some text some more text
Other text more and more text
some text
some text with no comment
Thanks in advance.
All- I'm a newbie working on a VWD project. A couple questions arose when attempting to work with a project's dataset and its underlying SQL Server Express database:
Is it true that when changing the schema of a database in SQL Server Express through the VWD Database Explorer, one must take care to manually make parallel changes in the dataset? For example, if you make a relation between two tables in Database Explorer, you must do the same with the counterpart tables in the dataset? For example, I find that if I delete or create a relationship between two tables in the database, I must manually do the same in the dataset.
i am testing some encryption
scenarios ,in profiler the statements like "OPEN KEY" and all "Encrypt"
and "Decrypt" functions are removed automaticly from the trace
and replaced with a comment ,create a trace and try the code i attached ,
you will see in profiler trace that that all encryption related commands
are commented out ,this is what expected.
but now go to the batch and comment out the "SELECT @rrr' statment,
and run the batch ,this batch will fail beacuse "@rrr" is not declared,
now go back to profiler and you will see that for the failed batch
all the encryption command are NOT COMMENTED OUT !!!
esspecially important is the visibility of the password of the open key command.
seems like a very dangerous bug to me!!!
CREATE CERTIFICATE test1
ENCRYPTION BY PASSWORD = 'pGFD4bb925DGvbd2439587y'
WITH SUBJECT = 'Sammamish Shipping Records',
EXPIRY_DATE = '10/31/2009';
GO
CREATE SYMMETRIC KEY Key09 WITH ALGORITHM = TRIPLE_DES
ENCRYPTION BY CERTIFICATE test1;
GO
declare @Str nvarchar(100)
declare @Enc varbinary(max)
set @Str = 'encrypt this'
OPEN SYMMETRIC KEY Key09
decryption by CERTIFICATE test1 WITH PASSWORD = 'pGFD4bb925DGvbd2439587y'
SET @Enc
= EncryptByKey(Key_GUID('Key09'), @Str);
---select @rrr
select CONVERT(nvarchar(100), DecryptByKey(@Enc))
go
I have recently started using replication in SQL 2012 SP1. When a stored procedure is altered on the source, the changes are replicated to the subscribers; however, the comment headers are removed at the subscribers. Due to the vast number of stored procedures I have, I do not want to move the comments below the Create Procedure statement. Are there any other ways to have comment header move with the stored procedures?
Here is what I am experiencing
Source SP
ALTER PROCEDURE [dbo].[SPTest]
AS
BEGIN
SELECT GETDATE()
END
Destination SP
ALTER PROCEDURE [dbo].[SPTest]
AS
BEGIN
SELECT GETDATE()
END
Could someone explain to me what the acroymn BCV means and how it is applied with an SQL database?
Thanks
In sql2k5 we have
GRANT VIEW DEFINITION ON sp_name TO user
Did this option present in SQL2K?
------------------------
I think, therefore I am - Rene Descartes
Which SP should I use to get the definition of a user created SP?
Thanks,
Prakash.P