Compare Values In Consecutive Rows
May 8, 2008
I have the following variables VehicleID, TransactDate, TransactTime, OdometerReading, TransactCity, TransactState.
VehicleID is the unique vehicle ID, OdometerReading is the Odometer Reading, and the others are information related to the transaction time and location of the fuel card (similar to a credit card).
The records will be first grouped and sorted by VehicleID, TransactDate, TransactTime and OdometerReading. Then all records where the Vehicle ID and TransactDate is same for consecutive rows, AND TransactCity or TransactState are different for consecutive rows should be printed.
I also would like to add two derived variables.
1. Miles will be a derived variable that is the difference between consecutive odometer readings for the same Vehicle ID.
2. TimeDiff will be the second derived variable that will categorize the time difference for a particular vehicle on the same day.
My report should look like:
VehID TrDt TrTime TimeDiff Odometer Miles TrCity TrState
1296 1/30/2008 08:22:42 0:00:00 18301 000 Omaha NE
1296 1/30/2008 15:22:46 7:00:04 18560 259 KEARNEY NE
Can someone please help me here?
Thanks,
Romakanta
View 2 Replies
ADVERTISEMENT
May 8, 2008
I have the following variables VehicleID, TransactDate, TransactTime, OdometerReading, TransactCity, TransactState.
VehicleID is the unique vehicle ID, OdometerReading is the Odometer Reading, and the others are information related to the transaction time and location of the fuel card (similar to a credit card).
The records will be first grouped and sorted by VehicleID, TransactDate, TransactTime and OdometerReading. Then all records where the Vehicle ID and TransactDate is same for consecutive rows, AND TransactCity or TransactState are different for consecutive rows should be printed.
I also would like to add two derived variables.
1. Miles will be a derived variable that is the difference between consecutive odometer readings for the same Vehicle ID.
2. TimeDiff will be the second derived variable that will categorize the time difference for a particular vehicle on the same day.
My report should look like:
VehID TrDt TrTime TimeDiff Odometer Miles TrCity TrState
1296 1/30/2008 08:22:42 0:00:00 18301 000 Omaha NE
1296 1/30/2008 15:22:46 7:00:04 18560 259 KEARNEY NE
Can someone please help me here?
Thanks,
Romakanta
View 1 Replies
View Related
May 31, 2015
I've;
Id.........|......type....|.....Value
2001................1...............20
2001................2...............32
2002................1...............19
2002................2...............21
2003................1............... 3
2003................2...............30
I want;
Id........|.......Value
2001.................12
2002..................2
2003.................27
View 7 Replies
View Related
Nov 17, 2005
Hi
i have this variable called order1 in the table called datetable and i want to display out the duplicate orders in sql. how do i do that? do i need to use group by ?
thanks in advance.! any help?
well i actually get the answers by doin this...
select order1 from datetable group by order1 having count(*) > 1
however now i want to compare the values date1 in the first duplicate orders to the second duplicate order...like compare aaaa of the first row and aaaa of the second row ...how to do that? i need to compare the date1 in minutes..i only wan duplicate orders with minutes difference less than 30mins
eg
id Order1 date1
1 aaaaa 20051001 12:45
2 aaaaa 20051001 12:10
3 bbbbb 20031002 15:05
4 bbbbb 20031002 15:50
View 9 Replies
View Related
Jul 30, 2007
Hi
I€™ve a table like this (in SQL Server 2000).
v1 v2
2 8
7 10
11 15
13 17
v1 value of a row must be grater than v2 value of previous row, other wise I need to display that row, in above example, I need to display 2nd & 4th rows.
please advise
Thanks
View 9 Replies
View Related
Mar 2, 2011
I need to determine if a value for a group of rows is the same or different and I am not sure where to begin. I am fairly new to writing T-Sql code. I am working with SQL Server 2005. This is a work assignment; I am not a student.
I have two tables: One for Course and another for CourseDays. As the Course table implies, it lists courses for a school. The CourseDays tables has a row for each day a course is held. For instance, one course maybe held on Monday, Wednesday, and Friday, so there would be three rows, one row for each day. A given course could be held in a different room for each day. I am trying to write a query that returns one row for each course, and if the room number is the same for each day the class is held, return that room number in the row, else return 'Various'.
Course table:
CourseID, Desc
1 English
2 History
3 Science
CourseDays table:
CourseID, Day, RoomID
1 M 320
1 W 445
1 F 680
2 T 123
2 Th 123
3 M 514
3 T 514
3 W 521
3 Th 901
3 F 521
Expected results:
CourseID, Desc, RoomID
1 English Various
2 History 123
3 Science Various
I simplified the example, as there are about 30 columns in the table and about half a million rows.
View 14 Replies
View Related
Jan 8, 2008
Hello,
I have a stored procedure that inserts 5 rows into a table. The execution of the SP is inside a transaction like in the code below:
Code Block
SqlConnection conn = new SqlConnection(ConnectioString);
conn.Open();
SqlTransaction trans = conn.BeginTransaction();
try
{
// execute stored procedure... insert 5 rows
trans.Commit();
}
catch (Exception ex)
{
trans.Rollback();
}
finally
{
conn.Close();
}
Suppose that N users are executing the code, one independent of the other, in the same time and they both commit the transaction at the same time.
Can I suppose that the rows inserted in the table by one user will be consecutive?
Thanks!
View 5 Replies
View Related
Oct 12, 2007
Hi Fellows
I am trying to organize these information.the data come form two tables that are not relating, but I did a join and my primary key is the filed polygon. I have a list of points(geomseq) for each polygon but the number of points(geomseq) can change. I have this inofrmation in a data base.
geomseq polygon xc yc x1 y2
0 17 21 22.5 0 0
3 17 21 22.5 40 40
2 17 21 22.5 0 20
4 17 21 22.5 20 0
1 17 21 22.5 0 10
5 17 21 22.5 10 10
1 18 40 40.5 0 20
4 18 40 40.5 20 30
0 18 40 40.5 0 0
3 18 40 40.5 10 20
2 18 40 40.5 5 15
5 18 40 40.5 30 35
6 18 40 40.5 40 40
9 18 40 40.5 80 80
7 18 40 40.5 45 45
8 18 40 40.5 50 60
I want something like this
geomseq polygon xc yc x1 y2
0 17 21 22.5 0 0
1 17 21 22.5 0 10
2 17 21 22.5 0 20
3 17 21 22.5 40 40
4 17 21 22.5 20 0
5 17 21 22.5 10 10
0 18 40 40.5 0 0
1 18 40 40.5 0 20
2 18 40 40.5 5 15
3 18 40 40.5 10 20
4 18 40 40.5 20 30
5 18 40 40.5 30 35
6 18 40 40.5 40 40
7 18 40 40.5 45 45
8 18 40 40.5 50 60
9 18 40 40.5 80 80
regards and thanks in advance
Edwin
View 3 Replies
View Related
Feb 21, 2013
SQL Server 2008.
From individual event logs I have generated a table where arrivals and departures at a location are registered per device. As there are multiple registration points, there might be multiple consecutive registrations per location.
If this is the case I need to filter those out and have one registration per location and in the result I need to get the earliest arrival and the latest departure of these consecutive rows.
Part of the table:
logIDdeviceIDArrivedDepartedLocationIDGrp1Grp2Grp
3485441082013-02-07 17:51:05.0002013-02-07 17:51:15.0005110
3492041082013-02-07 17:51:15.0002013-02-07 17:51:26.0005220
3500241082013-02-07 17:51:27.0002013-02-07 17:51:37.0003312
3508941082013-02-07 17:51:41.0002013-02-07 17:51:54.0004413
[Code] ....
So as long the field LocationID is the same in the next row, it needs to be grouped.
I have added the rows Grp1, Grp2, Grp in an attempt to get an unique grouping number with the following script in the select statement:
,ROW_NUMBER() OVER(PARTITION BY DeviceID
ORDER BY logID) AS Grp1
,ROW_NUMBER() OVER(PARTITION BY DeviceID, LocationID
ORDER BY logID) AS Grp2
,ROW_NUMBER() OVER(PARTITION BY DeviceID
ORDER BY logID)
-
ROW_NUMBER() OVER(PARTITION BY DeviceID, LocationID
ORDER BY logID) AS Grp
By subtracting Grp2 from Grp1 (Grp = Grp1 - Grp2) I hoped to get an unique group number for each set of equal consecutive locations, however the Grp2 column does not restart from 1 each time the LocationID changes: Grp2 in line 7 should have been 1 again, but it is 2 because this is the second row with LocationID = 3 in the list.
View 12 Replies
View Related
Oct 15, 2014
How can i calculate datediff (in minutes) between two consecutive rows without using CTE & Temp tables?
I was using this successfully, but i need something without CTE and temp tables (both of them are not supported in the tool i am trying to generate a report using custom query).
WITH CTE AS (SELECT ROW_NUMBER() OVER (ORDER BY Id desc) AS RowNo, * FROM MyTable)
SELECT t1.*, ISNULL(DATEDIFF(mi, t2.CreateDate, t1.CreateDate), 0) AS Duration
FROM CTE t1
LEFT JOIN CTE t2 ON t1.RowNo = t2.RowNo - 1
ORDER BY t1.Id desc
View 5 Replies
View Related
Jul 2, 2015
I have a table like this.
CREATE TABLE Table1
([S_ID] varchar(7), [S_ACTV_CODE] varchar(4), [S_USER] varchar(5), [S_DATETIME] varchar(19), [S_ACT_IND] int)
;
INSERT INTO Table1
([S_ID], [S_ACTV_CODE], [S_USER], [S_DATETIME], [S_ACT_IND])
VALUES
('AAA-111', NULL, 'USER1', '2015-06-15 00:21:06', 0),
('AAA-111', '2', 'USER1', '2015-06-15 00:21:07', 0),
[code]....
Basically I want to calculate the time spent by S_Users on a particular S_ACTV_CODE:
- S_ACTV_CODE_PREV means the previous active records.
- S_START_TIME is the time of S_DATETIME when a S_ACTV_CODE starts
- S_END_TIME is the time before a S_ACTV_CODE changes to another S_ACTV_CODE
- For the first record, S_ACTV_CODE is null, so there is no S_ACTV_CODE_PREV, so S_ACTV_CODE_PREV is NULL
- For the second record S_ACTV_CODE has some value, but S_ACTV_CODE_PREV is NULL for first record. So second record S_ACTV_CODE_PREV is also NULL
- For the last record (means S_ACTV_IND = 1), the user is currently working on it and S_ACTV_CODE is not changed. So S_END_TIME is a open time and we want to keep it as NULL
So the result should be as below:
S_ID S_ACTV_CODE_PREV S_ACTV_CODE_CURR S_USER S_START_TIME
S_END_TIME TIME_SPENT (in Sec)
AAA-111 NULL NULL USER1 2015-06-15 00:21:06
2015-06-15 00:21:07 1
AAA-111 NULL 2 USER1 2015-06-15 00:21:07
2015-06-17 03:20:33 183566
AAA-111 2 4 USER2 2015-06-17 03:20:33
[code]....
View 9 Replies
View Related
Jul 20, 2005
I'm trying to come up with an elegant, simple way to compare twoconsecutive values from the same table.For instance:SELECT TOP 2 datavalues FROM myTable ORDER BY timestamp DESCThat gives me the two latest values. I want to test the rate ofchange of these values. If the top row is a 50% increase over the rowbelow it, I'll execute some special logic.What are my options? The only ways I can think of doing this arepretty ugly. Any help is very much appreciated. Thanks!B.
View 22 Replies
View Related
Jul 31, 2014
I have a data set that looks something like like this:
Row# Data
1 A
2 B
3 B
4 A
5 B
6 B
7 A
8 A
9 A
I need wanting to assign a group ID to the data based on consecutive values. Here's what I need my data to look like:
Row# Data GroupID
1 A 1
2 B 2
3 B 2
4 A 3
5 B 4
6 B 4
7 A 5
8 A 5
9 A 5
You'll notice that there are only two values in DATA but whenever there is a flip between them, the GroupID increments.
View 2 Replies
View Related
Jan 23, 2008
Hi All,
I receive the input file with some 100 columns and some 20k+ rows and I want to check the incoming input row is existed in the database or not based on 2 key columns. If the row is existed then I need to check all the columns (nearly 100 columns) values in input and the database are equal or not. If both are equal I need to treat them seperately if not there is a seperate logic. How Can I do that check for each row and for each column?
Basically the algorithm is like this, if the input file row is not existed in the database then treat that as new row else if the input row is existed in the database then check all the columns are equal or not. If all the columns are equal then treat that as existing row and do nothing else if some columns are not equal then treat this row seperately.
I found some thing to achieve the above thing.
1. Take the input row and check in the database.
2. If the row is not found in the database then treat it as new row.
3. If row is found in the database then
a) Take the source row and prepare a concatenated string for all the columns
b) Take the database row and prepare a concatenated string for all the columns
c) Find out the hash code for the 2 strings and then compare hash codes for equal.
The disadvantage of this is running a loop 2*m*n times where m is the number of rows and n is the number of columns. It should be done 2 times for input file row and database row.
Can anybody suggest a good method to do this?
What does the function "GetHashCode" for InputBuffer in method "Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)" will do?
Will it generates hash code based on all the columns values?
Pls clarify.
Regards
Venkat.
View 1 Replies
View Related
Jul 26, 2014
I am relatively new to SQL and as a project I have been asked to create the SQL for a simple database to record train details. I want to implement a check constraint which will prevent data from being inserted into a table if the weight of the train is more than the maximum towing weight of the locomotive. FOr instance, I need to add the unladen weight and maximum capacity of each wagon (located in the wagon type table) and compare it against the locomotive maximum pulling weight (the locomotive class table). I have the following SQL but it will not work:
check((select SUM(fwt.unladen_weight+fwt.maximum_payload) from
hauls as h,freight_wagon as fw,freight_wagon_type as fwt,train as t where
h.freight_wagon_serial_number = fw.freight_wagon_serial_number and
fw.freight_wagon_type = fwt.freight_wagon_type and
h.train_number = t.train_number) <
(select lc.maximum_towing_weight from locomotive_class as lc,locomotive as l,train as t where
lc.locomotive_class = l.locomotive_class and l.locomotive_serial_number = t.locomotive_serial_number))
The hauls table is where the constraint has been placed and is the intermediary table between train and freight wagon.
I may not have explained this very well; but in short, i need to compare the sum of two values in one table against a values located in another table...At present I keep getting a message telling me the sub query cannot return more than one row.
View 2 Replies
View Related
Nov 11, 2006
Here is my statement:
Dim MyCommand As SqlDataAdapter
MyCommand = new SqlDataAdapter("select * from Request T1, Users T2 where RunID= "+ intRun_Num +" and T1.UserID = T2.UserID ORDER By Username", MyConnection)
I'm getting error saying:
Input string was not in a correct format.
the problem is the intRunNum. When I put intRunNum.toString(), there is no error but no results are coming up.
How do I get past this?
View 3 Replies
View Related
Oct 22, 2007
hello there,
i have a matrix which displays data for different products.i have grouped them by year and month.now i want to compare each month to the previous month and show an indicator that this month the sales was down or up.for that i need to compare a month with the previous month.how can i do this in reporting service.please help.
cheers
zolf
View 1 Replies
View Related
Oct 22, 2007
hello there,
i have a matrix which displays data for different products.i have grouped them by year and month.now i want to compare each month to the previous month and show an indicator that this month the sales was down or up.for that i need to compare a month with the previous month.how can i do this in reporting service.please help.
cheers
zolf
View 2 Replies
View Related
Aug 2, 2004
I'm stuck trying to compare date values from users selection against a database. I also need to add a condition statement on if the results return no match. How would I do that?
Also, I'm not even sure if my SELECT statement is right. The user will hit a date that will be in format m/d/yyyy and that will be compared to see if it exist in the database. The datebase column "date_created" is default with date/time( 8 ). But when I compare the to together, nothing returns back. The page loads successfully, but no results from the database.
Here is my code:
dim conpubs as sqlconnection
dim cmdSelectAuthors as sqlcommand
dim dtrAuthors As sqlreader
conpubs = New sqlconnection(configurationsettings.appSettings("STD"))
conpubs.open()
cmdSelectAuthors = New sqlcommand("Select * From HotNews WHERE date_created=" & y, conpubs)
dtrAuthors = cmdSelectAuthors.ExecuteReader()
Response.Write("<table><tr><td>")
While dtrAuthors.Read()
Response.Write(dtrAuthors("title") & "<br>")
End While
Response.Write("</td></tr></table>")
dtrAuthors.close()
conPubs.close()
View 1 Replies
View Related
Aug 2, 2004
I'm stuck trying to compare date values from users selection against a database. I also need to add a condition statement on if the results return no match. How would I do that?
Also, I'm not even sure if my SELECT statement is right. The user will hit a date that will be in format m/d/yyyy and that will be compared to see if it exist in the database. The datebase column "date_created" is default with date/time( 8 ). But when I compare the to together, nothing returns back. The page loads successfully, but no results from the database.
Here is my code:
dim conpubs as sqlconnection
dim cmdSelectAuthors as sqlcommand
dim dtrAuthors As sqlreader
conpubs = New sqlconnection(configurationsettings.appSettings("STD"))
conpubs.open()
cmdSelectAuthors = New sqlcommand("Select * From HotNews WHERE date_created=" & y, conpubs)
dtrAuthors = cmdSelectAuthors.ExecuteReader()
Response.Write("<table><tr><td>")
While dtrAuthors.Read()
Response.Write(dtrAuthors("title") & "<br>")
End While
Response.Write("</td></tr></table>")
dtrAuthors.close()
conPubs.close()
View 1 Replies
View Related
Feb 2, 2006
guys this is kind of a biggie for me.
i've only used sql server to compare the Date Portion of date(s), not the whole string (mm/dd/yyyy hh:mi).
i have a table called Time_Check which has two fields with timestamps,
"TimeLastRun & TimeNextRun". i was trying to compare the Current TimeStamp that i pass from a vb.net form to a stored procedure and compare that DateTime to the TimeNextRun. I'd like to then Update the two Time Columns if rows are found. Should i maybe be using the DateDif Func if i know ahead of time how much time should be elapsed(say five minutes)?
Any Code help is appreciated
Create Procedure dbo.My_Time_Check
@myDate smalldatetime
as
select alertnumber,alertname,TimeLastRun,TimeNextRun
from time_check
where timeNextRun >= @myDate
--would like to update these two columns if rows are found
thanks again
this forum is the best
rik
View 5 Replies
View Related
Sep 20, 2013
I am trying to compare values from two columns but I don't know what I am doing, I tried select custom5,skipcount substr( custom5, 1, 4) as 'mynumber' from songs where custom5 > '0000%' where skipcount > cast( substr( custom5, 1, 4) as int ); But that is obviously wrong?
View 4 Replies
View Related
Sep 11, 2007
This is my first post and I am probably not using the correct terminology but I will try. I want to compare the value of one of my fields in a result set to the value of the same column/field, but from the previous row in the result set. I am trying to identify the row in the result set when the value in a specified column changes value. I want to identify this row by placing a 1 in the last column. If that value did not change, then place a 0 in the last column.
I am not sure if this will make sense to anyone out there. Please let me know if more clarification is needed and I will try to provide it. Thanks for all your help in advance.
Don
View 2 Replies
View Related
Jun 25, 2007
I am trying to compare the last two values in the same column of atable. First of all, I have a column titled Row_Index that uses anindex which starts at 1 and increments by 1. What I am trying to dois compare the values in the column 'Shift_Date' for the maximum valueof Row_Index and the (maximum value - 1) of Row_Index. I've beentrying to declare two strings, setting each string equal to one of myvalues, and then comparing the strings. But this doesn't seam to beworking right. I'm not sure I am even declaring the stringscorrectly. Does anyone know how I can do this. A sample of what oneof my values looks like in Shift_Date is ' 6/25/2007'.
View 3 Replies
View Related
Feb 17, 2008
I have a table with one column. The values can be Y or N. How do I compare the 2 values and return a result depending on the comparison. For example, if I my column data looks like this.
Y
N
I need to compare them and if they match return a specific value and if they are different return a specific value.
View 12 Replies
View Related
Nov 16, 2011
I need to compare two tables in each row. the tables are as follows:-
Table a:
Code:
IDFirst_Name Last_name Birthdate
1Shradha Deshkmukh 1981-12-25 00:00:00
2Shradha Verma 1981-05-11 00:00:00
3Divya Dutta 1982-07-21 00:00:00
4Matthew Palmer 1983-12-28 00:00:00
table d:-
Code:
idfnlndob
1ShradhaTiwari1981-12-25 00:00:00
2DivyaDutta1983-07-21 00:00:00
3SulabhManesar1975-09-11 00:00:00
4MatthewPalmer1983-12-28 00:00:00
5SamuelMaxwell1984-05-22 00:00:00
I want to compare the tables using first name, and I have a log variable which I want to have the value as per the differences in the table that is if the first name matches and second name and dob dont match it shows log value for that FN as 'LN and DOB dont match'.
similarly if First name matches and dob matches then @log is 'LN not match'.
And in case all three match it should show 'match'as log value.The query I use is a s follows:-
Code:
USE testing
GO
DECLARE @NR int
DECLARE @log varchar(200)
SELECT @NR = COUNT(*) FROM a
WHILE @NR>0
[code]...
the result I am getting is :-
Code:
fnlndob (No column name)
ShradhaTiwari1981-12-25 00:00:00match
ShradhaTiwari1981-12-25 00:00:00match
DivyaDutta1983-07-21 00:00:00match
MatthewPalmer1983-12-28 00:00:00match
I have tried using CASE but that doesnt work either.
View 3 Replies
View Related
May 22, 2008
i have two tables. 1st table gets the information from as400, then moves the data to table 2 at sql 2000 server. I need to see when as400 updateschanges or inserts new information to table 1 how to updatechange or insert into table 2?
View 4 Replies
View Related
Feb 12, 2008
I running a query that returns a information from many tables. I need a way to compare the row returned to the previous row. This query currently returns the requested information for everytime an item placed. I need the query to return only the most recent order information. I can do this by doing a basic loop comparing the jobmatl.item and po.order_date. If the jobmatl.item match between the current row and last row compare the dates and keep the oldest.
Declare
@assembly ItemType
SET @assembly = '1110-2014'
SET @assembly = ISNULL(@assembly, '%')
SELECT
DISTINCT
jobmatl.item
, item.description
, item.drawing_nbr
, jobmatl.matl_qty
, itemloc.qty_on_hand
, vendaddr.name
, po.order_date
FROM
jobmatl with (nolock)
inner join item with (nolock) on item.item = jobmatl.item
inner join job with (nolock) on jobmatl.job = job.job
inner join poitem with (nolock) on item.item = poitem.item
inner join po with (nolock) on poitem.po_num = po.po_num
inner join vendaddr with (nolock) on vendaddr.vend_num = po.vend_num
inner join itemloc with (nolock) on itemloc.item = item.item
WHERE
jobmatl.job < ' 990000'
AND
job.item LIKE @assembly
ORDER BY
jobmatl.item
, po.order_date
View 4 Replies
View Related
Dec 4, 2014
I have 2 databases( "A" + "B") with identical number of tables and identical number of records for each table. There are also identical number of fields pre record per table. Table A has had the sensitive data within the fields scrambled.
I need to know if there is a way to read down each DB table by table, record by record, field by field and compare the data values. If they are different I need to output the Field name, the data value and the Table name from the Scrambled Table (lets say its "A").
View 1 Replies
View Related
Jun 4, 2014
I'm pretty new to sql server and now I need to create a script that:
Compares the values of the row with the same id as the row with the update table(which has updated values in it) in which the price, description or replacement part have been changed.
If they did change they should be updated and if they haven't been changed nothing should happen...
View 2 Replies
View Related
Apr 24, 2015
How to select a column to compare two values in it with AND
Select distinct c.reg#, a.fname, a.lname, to_char(b.L#) as "L"
from employee a, driver b, trip c
where a.e#=b.e#
and b.l#=c.l#
and (c.reg#='PKR3344'AND c.reg#='WWF1155')
order by c.reg#;
error no rows selected..I want c.reg# for the two values inclusive
View 4 Replies
View Related
Sep 10, 2007
HiBelow is a table with sample data to explain what I want to achieve.trackID member markerallele1------- ------ -------------------------------------------------------------------------------------------------------4734 4577 01-D8S1179 13.54734 4577 02-D21S11 12.64734 4577 03-D7S820 2.04734 4577 04-CSF1PO 3.04734 4577 06-TH01 4.04734 4577 07-D13S317 5.04734 4577 08-D16S539 9.04734 4577 11-vWA 6.04734 4577 12-TPOX 7.04734 4577 13-D18S51 1.04734 4578 01-D8S1179 13.04734 4578 02-D21S11 12.64734 4578 03-D7S820 2.04734 4578 04-CSF1PO 4.04734 4578 06-TH01 3.04734 4578 07-D13S317 5.04734 4578 08-D16S539 9.04734 4578 11-vWA 7.04734 4578 12-TPOX 6.04734 4578 13-D18S51 1.0Okay I am trying to compare allele1 values for differences for two orthree different member having the same trackID. The list of markerswould always be same for all members belonging to a particulartrackID.So in the above sample data. The trackID is same which is 4734. Thereare two members 4577 and 4578. The markers are same for each membersbut the corresponding allele1 values are different.I want to compare these two and state whether they are same or not. Iwould like to do this on a form containing subforms.Feel free to ask for clarification.Thank you.
View 2 Replies
View Related
Aug 1, 2007
I got 1 xml source and 1 sql DB table..
Eg: Contact table in xml contains
Email
--------
bbb@yaho.com
aaa@yahoo.com
ccc@yahoo.com
then COntact table in SQL server contains
aaa@yahoo.com
ccc@yahoo.com
zzz@yahoo.com
i want to compare the two table if got same value update the row..
how to compare it in SSIS
thx
View 4 Replies
View Related
