Complex Insert Statement

Oct 9, 2006

I have this stored procedure that returns a rowid, distance.  It has a latitude, longitude, and range as inputs, it takes the latitude and longitude and computes a distance with every lat/long in a table PL_CustomerGeocode.  Once that distance is computed it compares that distance with the range, and then returns the rowid, distance if the distance is <= range.  I have the SELECT statement down, but now i just need to enter this information into a seperate table PL_Distance with (rowid, distance) as columns.  The sql statement is as follows, and i cant figure out where the rowid part is an the distance part is:
 
     DECLARE @DegreesToRadians    float

    SET @DegreesToRadians = Pi()/180

    SELECT rowid, Cast(distance As numeric(9,3)) AS distance
    FROM (SELECT rowid, CASE WHEN @srcLat = geocodeLat And @srcLong = geocodeLong THEN 0.0
                             WHEN ABS(Arc) > 1 THEN 0.0
                             ELSE 3963.1 * 2 * asin(Power(Arc, 0.5)) END AS distance
    FROM (SELECT Power(sin(DLat/2),2) + cos(@srcLat*@DegreesToRadians)*cos(geocodeLat*@DegreesToRadians)*Power(sin(DLong/2),2) AS Arc, rowid,geocodeLat,geocodeLong
    FROM (SELECT @srcLong*@DegreesToRadians-geocodeLong*@DegreesToRadians AS DLong,
    @srcLat*@DegreesToRadians-geocodeLat*@DegreesToRadians AS DLat,
    rowid,
    geocodeLat,
    geocodeLong
    FROM dbo.PL_CustomerGeoCode) AS x) AS y) AS z
    WHERE distance <= @range

View 1 Replies


ADVERTISEMENT

Single Complex INSERT Or INSERT Plus UPDATE

Jul 23, 2005

Hello,I am writing a stored procedure that will take data from severaldifferent tables and will combine the data into a single table for ourdata warehouse. It is mostly pretty straightforward stuff, but there isone issue that I am not sure how to handle.The resulting table has a column that is an ugly concatenation fromseveral columns in the source. I didn't design this and I can't huntdown and kill the person who did, so that option is out. Here is asimplified version of what I'm trying to do:CREATE TABLE Source (grp_id INT NOT NULL,mbr_id DECIMAL(18, 0) NOT NULL,birth_date DATETIME NULL,gender_code CHAR(1) NOT NULL,ssn CHAR(9) NOT NULL )GOALTER TABLE SourceADD CONSTRAINT PK_SourcePRIMARY KEY CLUSTERED (grp_id, mbr_id)GOCREATE TABLE Destination (grp_id INT NOT NULL,mbr_id DECIMAL(18, 0) NOT NULL,birth_date DATETIME NULL,gender_code CHAR(1) NOT NULL,member_ssn CHAR(9) NOT NULL,subscriber_ssn CHAR(9) NOT NULL )GOALTER TABLE DestinationADD CONSTRAINT PK_DestinationPRIMARY KEY CLUSTERED (grp_id, mbr_id)GOThe member_ssn is the ssn for the row being imported. Each member alsohas a subscriber (think of it as a parent-child kind of relationship)where the first 9 characters of the mbr_id (as a zero-padded string)match and the last two are "00". For example, given the followingmbr_id values:1234567890012345678901123456789021111111110022222222200They would have the following subscribers:mbr_id subscriber mbr_id12345678900 1234567890012345678901 1234567890012345678902 1234567890011111111100 1111111110022222222200 22222222200So, for the subscriber_ssn I need to find the subscriber using theabove rule and fill in that ssn.I have a couple of ideas on how I might do this, but I'm wondering ifanyone has tackled a similar situation and how you solved it.The current system does an insert with an additional column for thesubscriber mbr_id then it updates the table using that column to joinback to the source. I could also join the source to itself in the firstplace to fill it in without the extra update, but I'm not sure if theextra complexity of the insert statement would offset any gains fromputting it all into one statement. I plan to test that on Monday.Thanks for any ideas that you might have.-Tom.

View 4 Replies View Related

Please Help With Complex (for Me) Sql Statement

Sep 3, 2006

I need some help on how to structure a sql statement. I am creating a membership directory and I need the stored procedure to output the Last Name, First Name (and if married) Spouse First Name. Like this Flinstone, Fred & Wilma All members are in one directory linked by two fields. [Family ID] all the family members have the same family id and then there is a Family position id that shows if they are the Husband, Wife or Kids. I have no problem with this part select (LastName + ',' + FirstName) as Name, [Phone 1] as Phone, [Unit Name] as WD, [Street 1] as Street, SUBSTRING(City,1,3) as City, SUBSTRING(Postal,1,5) as Zipfrom Membership Where [HH Order]=1 Order By LastName ASC Could someone help me on how to display the " & Spouse FirstName " as part of the name field only if there is a spouse [HH Order]=2 for the current [Family ID]????

View 6 Replies View Related

Complex Sql Statement

Nov 13, 2006

I need to get multiple values for each row in a database, then do a calculation and insert the calculation and the accountnumber related to the calculation the data, into a different column.  I get an error trying it this way...there is no real identifier, it is jsut something that needs to get done per row...any ideas on how I can accomplish this?
 Declare @NetCommission decimal
Declare @AccountNumber varchar(50)
Set @NetCommission = (select (CommissionRebate * Quantity)
from Account A
Join Trades T on A.AccountNumber = T.AccountNumber)
Set @AccountNumber = (select A.AccountNumber
from cmsAccount A
Join Trades T on A.AccountNumber = T.AccountNumber)
 
Insert into Transaction
(
Payee
,Deposit
,AccountNumber
)
Values
(
'Account Credit'
,@NetCommission
,@AccountNumber
)

View 13 Replies View Related

Complex Sql Statement, Need Help

Jan 15, 2004

i have a complex sql statement and i think that my structure looks good but apparently not because i keep getting the same error, i was wondering if anyone knew how to correct this problem.



SELECT A.*, B.Name, C.SIName, D.IID,

(Select [LastName] , [FirstName]
FROM E INNER JOIN F ON E.SID =
F.SID , A
WHERE F.Emp='Service' AND E.Lead=1 AND E.ID=[A].[D])
AS Service,

(Select [LastName] , [FirstName]
FROM E INNER JOIN F ON E.SID =
F.SID ,A
WHERE F.Emp='Industry' AND E.Lead=1 AND E.ID=[A].[D])
AS Industry

FROM A , B, C
WHERE (1=1) AND B.SID = C.SID AND A.ID = B.ID


i always get this error: Only one expression can be specified in the select list when the subquery is not introduced with EXISTS.

does anyone know how to fix this query?

View 9 Replies View Related

About The Complex SQL Statement

Mar 18, 2004

Belows are the data of table T1

field1 field2 field3 Value
F1 F2 F3 A
F1 F2 F3 B
F1 F2 F3 C
... .... .....
F1 F2 F3 Z


Can any bright person help to script the SQL to extract above data set and present as below ???

field1 field2 field3 Value
F1 F2 F3 ABC......Z

Thanks for help

View 2 Replies View Related

Complex SELECT Statement Help

Aug 30, 2007

Hi All,
 My sql is a little rusty, i ve been trying to do few things but still no luck. I m trying to query some data in one column based on certain . Here is my puzzle:
I have 7 tables: categories, characteristics, configs, rm_cat, rm_chars, rm_conf and rooms.
And here are the details on these tables:
- categories: {cat_id, cat_name}
- characteristics: {char_id, char}
- configs: {conf_id, conf}
- rm_cat: {room_id, cat_id}
- rm_chars: { room_id, char_id}
- rm_conf: {room_id, conf_id}
- room: {room_id. room_name}
 
I m trying to select a "room_name" based on a certain cat_id, char_id and conf_id and i don't know how to do this.
 
Sincerely,

View 3 Replies View Related

Help Forming A Complex SQL Statement

Nov 12, 1998

I have what is turning out to be a very complex T-SQL query to build.

I'm porting an App from Access to SQL Server... one of the Access queries used a function made in VBA to return a value.

For the life of me, I can't figure out how to make this work using only SQL Statements.

I'm not even sure how to even ask this. So here I go.. I've really simplified the SQL statement to help out with this. There are initially two tables.

Container and TraceRecord

Container is a table of Cargo Containers (the truck trailers you see on the highways)
TraceRecord is a table of location records as the containers move from city to city on the railroad.

The Containers move on fixed routes (ie.. Long Beach to Chicago, Long Beach to New York, etc...).. in the Container table there is a field called Route which records which Route the container is moving on and is related to a table of routes which I'll get to later.

[This is the old Access query.. notice the IIF statement and the function call to "IsOnTime"]
SELECT c.ContainerID, c.IngateDate, t.Location, t.Status, t.EventDate, t.EventTime
IIf(IsNull(c.IngateDate) Or IsNull(t.Location),"No Ingate Rail Record Captured",IsOnTime(t.Location,t.Status,t.Rail,c.Ro ute,c.IngateDate,t.EventDate, t.EventTime)) AS RailSch,
t.Rail
FROM c Container LEFT JOIN t TraceRecord ON c.ContainerID = t.UnitNumber

For each route there is a scheduled travel plan.

Example.. when a container is taken to the BNSF railroad in Long Beach that is called an "Ingate" and is considered Day 0 (zero). As the container moves on the railroad from Long Beach to Chicago, it will pass through other cities, and the TraceRecord table will record where the container is and what time and day.

What I need to do is determine, based on the latest TraceRecord record, by how many hours is the Container "on time".

There is a routing table which lists the predefined travel path for each route.. listing the number of days and hours a container should be a certain place since the day the container was taken into the railroad at the origin "Ingate".

What the IsOnTime function did was take the arguments and do some math with the routing tables and find out how many hours a unit is or is not on time.

Here's a copy of the function from Access 97 using DAO. I don't know if any of this is going to make sense to anyone.. but I'm stuck and don't know what else to do.

Function IsOnTime(strLocation As String, strStatus As String, strRail As String, intRoute As Integer, _
dateIngateDate As Date, dateCurrentDate As Date, dateCurrentTime As Date) As Variant
On Error GoTo errorh:
Dim rs As Recordset 'Rail Schedule Recordset
Dim db As Database 'Current Database
Dim sqlFind As String 'Search String to find city transit time
Dim dateScheduleDateTime As Date
Dim dateDifference As Integer 'Hours difference between trace and schedule
Dim varvar As Variant


If dateIngateDate = Null Then
IsOnTime = -9999
Else
Set db = CurrentDb()
Set rs = db.OpenRecordset("tTransitTimeTable", dbOpenSnapshot)

sqlFind = "([RouteID] = " & intRoute & " AND [City] = '" & strLocation & "' AND [StatusCode] = '" _
& strStatus & "' AND [Rail] = '" & strRail & "')"



rs.FindFirst sqlFind
If rs.NoMatch = False Then

If (rs!daymarker = "" Or IsNull(rs!daymarker)) And (IsNull(rs!daymarker) Or rs!cutoff = "") Then
IsOnTime = "Finished"
rs.Close
Exit Function
End If

dateScheduleDateTime = DateAdd("d", rs!daymarker, (dateIngateDate + rs!cutoff))

dateDifference = DateDiff("h", dateScheduleDateTime, (dateCurrentDate + dateCurrentTime))
If dateDifference <> 0 Then

IsOnTime = -dateDifference
End If
If dateDifference = 0 Then
IsOnTime = 1
End If
Else
IsOnTime = -9999
End If

rs.Close
End If
Exit Function

View 1 Replies View Related

Complex SQL SELECT Statement

Jul 23, 2004

There are 3 tables, VendorLists, Vendors, and Referrals.

VendorLists is a linking table. It has VendorListID, VendorID, and ListID fields.

Vendors is linked to VendorLists through the VendorID field (one to many)

Referrals is linked to VendorLists through VendorListID (one to many)

I'm given a value for ListID and have to pull records from both the Vendors and Referrals table (a referral is a description of a vendor, one to many).

I am able to do this with the following SQL select statement:

SELECT Referrals.Description, Vendors.Company
FROM Referrals CROSS JOIN Vendors
WHERE Referrals.VendorListID IN
(SELECT VendorListID FROM VendorLists WHERE (ListID = lid))
AND
(Vendors.VendorID IN (SELECT VendorID FROM VendorLists WHERE ListID = lid))
ORDER BY Vendors.VendorID

This pulls all the appropriate records and values that i need and orders them by the identifier for the vendor. However, I want to randomly order the vendors but still group them together by company, so, if the VendorID is 1 for "joe's crab shack" and 2 for "billy's ice cream shop", the above will always list joe's crab shack first and all it's referrals. i want to be able to randomly order the vendors, but still keep the referrals of those vendors grouped together so that when i iterate over them, they're grouped.

Does anyone have any idea how to do this? I'm stumped!!

View 4 Replies View Related

Please Help Me With A Complex DELETE Statement

Jan 27, 2005

Hello, currently I have a query like this:


PHP Code:




 SELECT     *
FROM         relations INNER JOIN
                      paths ON relations.path = paths.path_id
WHERE     
                      (paths.links = '161') AND (relations.node1 = 162) OR
                      (paths.links = '161') AND (relations.node2 = 162) OR
                      (paths.links = '162') AND (relations.node1 = 161) OR
                      (paths.links = '162') AND (relations.node2 = 161) OR
                      (paths.links LIKE '162%') AND (relations.node1 = 161) OR
                      (paths.links LIKE '%162') AND (relations.node2 = 161) OR
                      (paths.links LIKE '161%') AND (relations.node1 = 162) OR
                      (paths.links LIKE '%161') AND (relations.node2 = 162) OR
                      (paths.links LIKE '%161;162%') OR
                      (paths.links LIKE '%162;161%')
ORDER BY relations.node1 





Don't pay attention to the 161 and 162 things, is just test data, now my problem is that I want to transform that into a DELETE statement, but I can't find the right way to do it, so far I managed to do something like:


PHP Code:




 DELETE relations
FROM         relations INNER JOIN
                      paths ON relations.path = paths.path_id
WHERE     
                      (paths.links = '161') AND (relations.node1 = 162) OR
                      (paths.links = '161') AND (relations.node2 = 162) OR
                      (paths.links = '162') AND (relations.node1 = 161) OR
                      (paths.links = '162') AND (relations.node2 = 161) OR
                      (paths.links LIKE '162%') AND (relations.node1 = 161) OR
                      (paths.links LIKE '%162') AND (relations.node2 = 161) OR
                      (paths.links LIKE '161%') AND (relations.node1 = 162) OR
                      (paths.links LIKE '%161') AND (relations.node2 = 162) OR
                      (paths.links LIKE '%161;162%') OR
                      (paths.links LIKE '%162;161%') 





But that would delete only from the relations table and not from the paths table. I need to delete from both tables.

Can anyone help me please? Its kinda urgent.

Thansk!

View 5 Replies View Related

Complex SELECT Statement

Feb 24, 2004

TABLE : USER
USERID
1
2

TABLE : TIME
TIMEID|USERID|RT|OT|DOT|DATE
1|1|8|2|1|2004-02-01
2|1|8|2|0|2004-02-02

3|2|8|0|0|2004-02-01
4|2|8|2|2|2004-02-02

RT : Regular Time
OT : Over-Time
DOT : Double Over-Time

I need to write a query to display the results in this way

USERID|DATE|TIME
1|2004-02-01|8
1|2004-02-01|2
1|2004-02-01|1

1|2004-02-02|8
1|2004-02-02|2

2|2004-02-01|8
2|2004-02-02|8
2|2004-02-02|2
2|2004-02-02|2

basically, the time entries for each user each day , seperate rows for RT, OT, DOT if they are not equal to 0

ive been breaking my head on this for quite a while. any help is appreciated.

thanks

View 5 Replies View Related

Help: Complex Select Statement

Jul 20, 2005

Here is my SQL string:"SELECT to_ordnum, to_orddate," _& "(SELECT SUM((DDPROD.pr_stanmat * DDPROD.pr_prfact) *(DOBOM2.b2_quant * DDORD.or_quant)) FROM DDPROD INNER JOIN DOBOM2 ONDDPROD.pr_prodnum = DOBOM2.b2_prodnum INNER JOIN DDORD ONDOBOM2.b2_orid = DDORD.or_id INNER JOIN DDTORD ON DDORD.OR_TOID =DDTORD.TO_ID WHERE DOBOM2.b2_ordnum = ''order number here from resultof outer select) AS Total" _& "FROM DDTORD WHERE to_trak2id IN (39, 40, 41) AND to_ordtype = 's'AND to_status = 'c' GROUP BY to_ordnum, to_orddate ORDER BY to_ordnumDESC"The outter Select statement returns various amounts of order numbersrepresented by 'to_ordnum' in the outer Select clause which has tomeet the critera in the outer WHERE clause. I would like to placethese numbers selected into the inner WHERE clause for the innerselect statement where DOMBOM2.b2_ordnum = ?the order selected byouter select statement.I have tried placing to_ordnum into that location but the SQL2000server does not process it.Any suggestions, ideas?Thank you,Brett

View 1 Replies View Related

Complex SQL Select Statement That Works But...

Jul 24, 2006

I have a pretty complex SQL statement that looks like this:
SELECT     aspnet_Employers.active, aspnet_Employers.accountexecutiveusername, aspnet_Employers.created, aspnet_Employers.Title AS Contact,                       SUM(aspnet_Employers.EmployeeCount) AS [# Emps], COUNT(aspnet_Signups.account) AS [# Email Addresses], COUNT(aspnet_ContactMe.username)                       AS [# Contact Me], COUNT(aspnet_AppsSubmitted.account) AS [# Apply Now]FROM         aspnet_Employers LEFT OUTER JOIN                      aspnet_AppsSubmitted ON aspnet_Employers.UserName = aspnet_AppsSubmitted.account LEFT OUTER JOIN                      aspnet_ContactMe ON aspnet_Employers.UserName = aspnet_ContactMe.username LEFT OUTER JOIN                      aspnet_Signups ON aspnet_Employers.UserName = aspnet_Signups.accountGROUP BY aspnet_Employers.accountexecutiveusername, aspnet_Employers.created, aspnet_Employers.Title, aspnet_Employers.active
It does work the way i want it, but the problem is, on my Gridview when i change the Employers accounts "Active" status either way, it changes the username field from the username of the account, to "null".
Why does it do this?
What would i change to prevent this from happening?
 
Thanks!

View 3 Replies View Related

Complex SELECT Statement Issue

Sep 30, 2007

I may not be seeing the forest through the trees here but here goes.  I've got a table of computer configurations with columns for cpu, ram, m/b, hdd, etc.  The values in those columns are related to the id field in another table named parts.  The parts table has columns, id, partnumber, description, and cost.  What I want to do is be able to pull a record from the computer configurations table and instead of getting the integers in the cpu, ram, etc. fields I want to put the corresponding description field from the parts table.  For example:I want this...id    Name            CPU            RAM        MB              HDD    ... 1   Fast Machine   Fast CPU   Big RAM   Greate MB   Huge HDDNOT this....id    Name            CPU            RAM        MB              HDD    ...
1   Fast Machine   1               3               2                7 Below is a screenshot of my actual table relationships.Thanks in advance 

View 14 Replies View Related

Complex Update Statement Not Working

Nov 6, 2006

hi.

can somebody explain to me why the below
update fails to update one row and updates
the entire table?


Code:


UPDATE addlist
SET add_s = 1
WHERE EXISTS
(SELECT a.add_s, a.email_address, e.public_name
FROM add a, edit e
WHERE a.email_address = e.email_address
and a.add_email = 'mags23@rice.edu' and a.add_s = 0 and e.public_name = 'professor');



and, what is the solution? thank you.

View 8 Replies View Related

Issue With A Complex Case Statement

Apr 29, 2008

I am new to SQL server 2005. I run a large query daily against a teradata warehouse and it populates an access database. I am now attempting to run my query in a SQL 2005 database. I get an error on this case statement:

CASE
WHENCAST ( ( B.zip_cd ( format '99999' ) ) AS char ( 5 ) ) = '*****' THEN SUBSTR ( CAST ( ( B.zip_cd ( format '999999999' ) ) AS char ( 9 ) ), 1, 5 )
ELSECAST ( ( B.zip_cd ( format '99999' ) ) AS char ( 5 ) )
ENDAS ZIP_CD

The error is: Msg 102, Level 15, State 1, Line 229
Incorrect syntax near '99999'.

Any help is greatly appreciated!!!

View 2 Replies View Related

Please Help With Complex Update Statement Logic

Nov 8, 2006

hi.I am having probelms with an update statement. every timei run it, "every" row updates, not just the one(s) intended.so, here is what i have. i have tried this with both AND and ORand neither seem to work.i dont know why this is elluding me, but i'd appreciate help with thesolution.thanks.UPDATE addSET add_s = 1WHERE add.add_status = 0 and add.add_email = 'mags23@rice.edu'or add_s in(SELECT a.add_sFROM add a, edit eWHERE a.email_address = e.email_addressand e.public_name = 'professor')

View 22 Replies View Related

Row_number Selecting From A Complex Select Statement

Sep 3, 2007

Hi,


Code Snippet


This is difficult to explain in words, but the following code outlines what I am trying to do:


with myTableWithRowNum as
(
select 'row' = row_number() over (order by insertdate desc), myValue
from
(
select table1Id As myValue from myTable1
union
select table2Id As myValue from myTable2
)
)

select * from myTableWithRowNum
Can anyone think of a work around so that I can use the Row_Number function where the data is coming from a union?

View 4 Replies View Related

Complex Insert Problem

Oct 16, 2007

I am not really sure how to phrase this problem so I have a picture to help

 
Okay the tables above allow me to create types of data for pages that collect small amounts of info without me having to create hundreds of small tables
so one type of data I collect is Employee First Aid training - that type of data is made up of three attributes EmployeeID (ID 3 in the Attributes table), FirstAidTrainingDate (ID 4 in the Attributes table), LocationID (id 6 in the attributes table) 
This data is to be saved in the Data Table as rows
so the data table looks like this assuming my DataThing is number 10 in the Objects table and its Type 1 in the Types table the data table will record
10,3,83
10,4,10/25/2007
10,6,35
 
My question is this without having to do three insert statements is there a way to pass in a pipedelimited string and have some dynamic sql do all the inserts for me?
If this makes no sense please tell me what  a biter I am :)
 
 

View 2 Replies View Related

Transact SQL :: Complex Query And Insert Data

Sep 1, 2015

I have three tables and all three are linked. Looking for query so that I can get the desired result. Notes for Table_A and Table_B:

ROW Data are given in the variables to insert the Row data. If these Row data are already exist with the exactly same sequence in the row of table then don't need to INSERT data again.If these variable date doen't exist then need to add this row.

Notes for Table_C:

Seq_id_Table_A is a Seq_id of #table_A. Seq_id_Table_B is a Seq_id of #table_B.

--Table_A----------------------Variables for Table_A--------------------
Declare @table_A_Y char(4)='TRC'
Declare @table_A_Y1 char(2)='1'

[code]...

View 6 Replies View Related

DB Engine :: Can't Use The MERGE Statement / How To Design WHERE Condition For Insert Statement

Nov 5, 2015

I've have a need with SQL Server 2005 (so I've no MERGE statement), I have to merge 2 tables, the target table has 10 fields, the first 4 are the clustered index and primary key, the source table has the same fields and index.Since I can't use the MERGE statement (I'm in SQL 2005) I have to make a double step operation, and INSERT and an UPDATE, I can't figure how to design the WHERE condition for the insert statement.

View 2 Replies View Related

Complex DB Search Forms (Store Proc Vs. Complex Where)

Nov 12, 2003

I have web forms with about 10-15 optional search parameters (fields) for a give table. Each item (textbox) in the form is treated as an AND condition.

Right now I build complex WHERE clauses based on wheather data is present in a textbox and AND each one in the clause. Also, if a particular field is "match any word", i get a ANDed set of OR's. As you can imagine, the WHERE clause gets quite large.

I build clauses like this (i.e., 4 fields shown):

SELECT * from tableName WHERE (aaa like '%data') AND (bbb = 'data') AND (ccc like 'data%') AND ( (xxx like '%data') OR (yyy like '%data%') )

My question is, are stored procedures better for building such dynamic SQL clauses? I may have one field or all fifteen. I've written generic code for building the clauses, but I don't know much about stored procedures and am wondering if I'm making this more difficult on myself.

View 7 Replies View Related

Strange Problem: SQL Insert Statement Does Not Insert All The Fields Into Table From Asp.net C# Webpage

Apr 21, 2008

An insert statement was not inserting all the data into a table. Found it very strange as the other fields in the row were inserted. I ran SQL profiler and found that sql statement had all the fields in the insert statement but some of the fields were not inserted. Below is the sql statement which is created dyanmically by a asp.net C# class. The columns which are not inserted are 'totaltax' and 'totalamount' ...while the 'shipto_name' etc...were inserted.there were not errors thrown. The sql from the code cannot be shown here as it is dynamically built referencing C# class files.It works fine on another test database which uses the same dlls. The only difference i found was the difference in date formats..@totalamount=1625.62,@totaltax=125.62are not inserted into the database.Below is the statement copied from SQL profiler.exec sp_executesql N'INSERT INTO salesorder(billto_city, billto_country, billto_line1, billto_line2, billto_name,billto_postalcode, billto_stateorprovince, billto_telephone, contactid, CreatedOn, customerid, customeridtype,DeletionStateCode, discountamount, discountpercentage, ModifiedOn, name, ordernumber,pricelevelid, salesorderId, shipto_city, shipto_country,shipto_line1, shipto_line2, shipto_name, shipto_postalcode, shipto_stateorprovince,shipto_telephone, StateCode, submitdate, totalamount,totallineitemamount, totaltax ) VALUES(@billto_city, @billto_country, @billto_line1, @billto_line2,@billto_name, @billto_postalcode, @billto_stateorprovince, @billto_telephone, @contactid, @CreatedOn, @customerid,@customeridtype, @DeletionStateCode, @discountamount,@discountpercentage, @ModifiedOn, @name, @ordernumber, @pricelevelid, @salesorderId,@shipto_city, @shipto_country, @shipto_line1, @shipto_line2,@shipto_name, @shipto_postalcode, @shipto_stateorprovince, @shipto_telephone,@StateCode, @submitdate, @totalamount, @totallineitemamount, @totaltax)',N'@billto_city nvarchar(8),@billto_country nvarchar(13),@billto_line1 nvarchar(3),@billto_line2 nvarchar(4),@billto_name nvarchar(15),@billto_postalcode nvarchar(5),@billto_stateorprovince nvarchar(8),@billto_telephone nvarchar(3),@contactid uniqueidentifier,@CreatedOn datetime,@customerid uniqueidentifier,@customeridtype int,@DeletionStateCode int,@discountamount decimal(1,0),@discountpercentage decimal(1,0),@ModifiedOn datetime,@name nvarchar(33),@ordernumber nvarchar(18),@pricelevelid uniqueidentifier,@salesorderId uniqueidentifier,@shipto_city nvarchar(8),@shipto_country nvarchar(13),@shipto_line1 nvarchar(3),@shipto_line2 nvarchar(4),@shipto_name nvarchar(15),@shipto_postalcode nvarchar(5),@shipto_stateorprovince nvarchar(8),@shipto_telephone nvarchar(3),@StateCode int,@submitdate datetime,@totalamount decimal(6,2),@totallineitemamount decimal(6,2),@totaltax decimal(5,2)',@billto_city=N'New York',@billto_country=N'United States',@billto_line1=N'454',@billto_line2=N'Road',@billto_name=N'Hillary Clinton',@billto_postalcode=N'10001',@billto_stateorprovince=N'New York',@billto_telephone=N'124',@contactid='8DAFE298-3A25-42EE-B208-0B79DE653B61',@CreatedOn=''2008-04-18 13:37:12:013'',@customerid='8DAFE298-3A25-42EE-B208-0B79DE653B61',@customeridtype=2,@DeletionStateCode=0,@discountamount=0,@discountpercentage=0,@ModifiedOn=''2008-04-18 13:37:12:013'',@name=N'E-Commerce Order (Before billing)',@ordernumber=N'BRKV-CC-OKRW5764YS',@pricelevelid='B74DB28B-AA8F-DC11-B289-000423B63B71',@salesorderId='9CD0E11A-5A6D-4584-BC3E-4292EBA6ED24',@shipto_city=N'New York',@shipto_country=N'United States',@shipto_line1=N'454',@shipto_line2=N'Road',@shipto_name=N'Hillary Clinton',@shipto_postalcode=N'10001',@shipto_stateorprovince=N'New York',@shipto_telephone=N'124',@StateCode=0,@submitdate=''2008-04-18 14:37:10:140'',@totalamount=1625.62,@totallineitemamount=1500.00,@totaltax=125.62
 
thanks

View 7 Replies View Related

Cannot INSERT Data To 3 Tables Linked With Relationship (INSERT Statement Conflicted With The FOREIGN KEY Constraint Error)

Apr 9, 2007

Hello
 I have a problem with setting relations properly when inserting data using adonet. Already have searched for a solutions, still not finding a mistake...
Here's the sql management studio diagram :

 and here goes the  code1 DataSet ds = new DataSet();
2
3 SqlDataAdapter myCommand1 = new SqlDataAdapter("select * from SurveyTemplate", myConnection);
4 SqlCommandBuilder cb = new SqlCommandBuilder(myCommand1);
5 myCommand1.FillSchema(ds, SchemaType.Source);
6 DataTable pTable = ds.Tables["Table"];
7 pTable.TableName = "SurveyTemplate";
8 myCommand1.InsertCommand = cb.GetInsertCommand();
9 myCommand1.InsertCommand.Connection = myConnection;
10
11 SqlDataAdapter myCommand2 = new SqlDataAdapter("select * from Question", myConnection);
12 cb = new SqlCommandBuilder(myCommand2);
13 myCommand2.FillSchema(ds, SchemaType.Source);
14 pTable = ds.Tables["Table"];
15 pTable.TableName = "Question";
16 myCommand2.InsertCommand = cb.GetInsertCommand();
17 myCommand2.InsertCommand.Connection = myConnection;
18
19 SqlDataAdapter myCommand3 = new SqlDataAdapter("select * from Possible_Answer", myConnection);
20 cb = new SqlCommandBuilder(myCommand3);
21 myCommand3.FillSchema(ds, SchemaType.Source);
22 pTable = ds.Tables["Table"];
23 pTable.TableName = "Possible_Answer";
24 myCommand3.InsertCommand = cb.GetInsertCommand();
25 myCommand3.InsertCommand.Connection = myConnection;
26
27 ds.Relations.Add(new DataRelation("FK_Question_SurveyTemplate", ds.Tables["SurveyTemplate"].Columns["id"], ds.Tables["Question"].Columns["surveyTemplateID"]));
28 ds.Relations.Add(new DataRelation("FK_Possible_Answer_Question", ds.Tables["Question"].Columns["id"], ds.Tables["Possible_Answer"].Columns["questionID"]));
29
30 DataRow dr = ds.Tables["SurveyTemplate"].NewRow();
31 dr["name"] = o[0];
32 dr["description"] = o[1];
33 dr["active"] = 1;
34 ds.Tables["SurveyTemplate"].Rows.Add(dr);
35
36 DataRow dr1 = ds.Tables["Question"].NewRow();
37 dr1["questionIndex"] = 1;
38 dr1["questionContent"] = "q1";
39 dr1.SetParentRow(dr);
40 ds.Tables["Question"].Rows.Add(dr1);
41
42 DataRow dr2 = ds.Tables["Possible_Answer"].NewRow();
43 dr2["answerIndex"] = 1;
44 dr2["answerContent"] = "a11";
45 dr2.SetParentRow(dr1);
46 ds.Tables["Possible_Answer"].Rows.Add(dr2);
47
48 dr1 = ds.Tables["Question"].NewRow();
49 dr1["questionIndex"] = 2;
50 dr1["questionContent"] = "q2";
51 dr1.SetParentRow(dr);
52 ds.Tables["Question"].Rows.Add(dr1);
53
54 dr2 = ds.Tables["Possible_Answer"].NewRow();
55 dr2["answerIndex"] = 1;
56 dr2["answerContent"] = "a21";
57 dr2.SetParentRow(dr1);
58 ds.Tables["Possible_Answer"].Rows.Add(dr2);
59
60 dr2 = ds.Tables["Possible_Answer"].NewRow();
61 dr2["answerIndex"] = 2;
62 dr2["answerContent"] = "a22";
63 dr2.SetParentRow(dr1);
64 ds.Tables["Possible_Answer"].Rows.Add(dr2);
65
66 myCommand1.Update(ds,"SurveyTemplate");
67 myCommand2.Update(ds, "Question");
68 myCommand3.Update(ds, "Possible_Answer");
69 ds.AcceptChanges();
70

and that causes (at line 67):"The INSERT statement conflicted with the FOREIGN KEY constraint
"FK_Question_SurveyTemplate". The conflict occurred in database
"ankietyzacja", table "dbo.SurveyTemplate", column
'id'.
The statement has been terminated.
at System.Data.Common.DbDataAdapter.UpdatedRowStatusErrors(RowUpdatedEventArgs rowUpdatedEvent, BatchCommandInfo[] batchCommands, Int32 commandCount)
at System.Data.Common.DbDataAdapter.UpdatedRowStatus(RowUpdatedEventArgs rowUpdatedEvent, BatchCommandInfo[] batchCommands, Int32 commandCount)
at System.Data.Common.DbDataAdapter.Update(DataRow[] dataRows, DataTableMapping tableMapping)
at System.Data.Common.DbDataAdapter.UpdateFromDataTable(DataTable dataTable, DataTableMapping tableMapping)
at System.Data.Common.DbDataAdapter.Update(DataSet dataSet, String srcTable)
at AnkietyzacjaWebService.Service1.createSurveyTemplate(Object[] o) in J:\PL\PAI\AnkietyzacjaWebService\AnkietyzacjaWebServicece\Service1.asmx.cs:line 397"


Could You please tell me what am I missing here ?
Thanks a lot.
 

View 5 Replies View Related

Interaction Between Instead Of Insert Trigger And Output Clause Of Insert Statement

Jan 14, 2008


This problem is being seen on SQL 2005 SP2 + cumulative update 4

I am currently successfully using the output clause of an insert statement to return the identity values for inserted rows into a table variable

I now need to add an "instead of insert" trigger to the table that is the subject of the insert.

As soon as I add the "instead of insert" trigger, the output clause on the insert statement does not return any data - although the insert completes successfully. As a result I am not able to obtain the identities of the inserted rows

Note that @@identity would return the correct value in the test repro below - but this is not a viable option as the table in question will be merge replicated and @@identity will return the identity value of a replication metadata table rather than the identity of the row inserted into my_table

Note also that in the test repro, the "instead of insert" trigger actually does nothing apart from the default insert, but the real world trigger has additional code.

To run the repro below - select each of the sections below in turn and execute them
1) Create the table
2) Create the trigger
3) Do the insert - note that table variable contains a row with column value zero - it should contain the @@identity value
4) Drop the trigger
5) Re-run the insert from 3) - note that table variable is now correctly populated with the @@identity value in the row

I need the behaviour to be correct when the trigger is present

Any thoughts would be much appreciated

aero1


/************************************************
1) - Create the table
************************************************/
CREATE TABLE [dbo].[my_table](
[my_table_id] [bigint] IDENTITY(1,1) NOT NULL,
[forename] [varchar](100) NULL,
[surname] [varchar](50) NULL,
CONSTRAINT [pk_my_table] PRIMARY KEY NONCLUSTERED
(
[my_table_id] ASC
)WITH (PAD_INDEX = OFF, IGNORE_DUP_KEY = OFF, FILLFACTOR = 70) ON [PRIMARY]
)

GO
/************************************************
2) - Create the trigger
************************************************/
CREATE TRIGGER [dbo].[trig_my_table__instead_insert] ON [dbo].[my_table]
INSTEAD OF INSERT
AS
BEGIN

INSERT INTO my_table
(
forename,
surname)
SELECT
forename,
surname
FROM inserted

END

/************************************************
3) - Do the insert
************************************************/

DECLARE @my_insert TABLE( my_table_id bigint )

declare @forename VARCHAR(100)
declare @surname VARCHAR(50)

set @forename = N'john'
set @surname = N'smith'

INSERT INTO my_table (
forename
, surname
)
OUTPUT inserted.my_table_id INTO @my_insert
VALUES( @forename
, @surname
)

select @@identity -- expect this value in @my_insert table
select * from @my_insert -- OK value without trigger - zero with trigger

/************************************************
4) - Drop the trigger
************************************************/

drop trigger [dbo].[trig_my_table__instead_insert]
go

/************************************************
5) - Re-run insert from 3)
************************************************/
-- @my_insert now contains row expected with identity of inserted row
-- i.e. OK

View 5 Replies View Related

Case Statement Error In An Insert Statement

May 26, 2006

Hi All,
I've looked through the forum hoping I'm not the only one with this issue but alas, I have found nothing so I'm hoping someone out there will give me some assistance.
My problem is the case statement in my Insert Statement. My overall goal is to insert records from one table to another. But I need to be able to assign a specific value to the incoming data and thought the case statement would be the best way of doing it. I must be doing something wrong but I can't seem to see it.

Here is my code:
Insert into myTblA
(TblA_ID,
mycasefield =
case
when mycasefield = 1 then 99861
when mycasefield = 2 then 99862
when mycasefield = 3 then 99863
when mycasefield = 4 then 99864
when mycasefield = 5 then 99865
when mycasefield = 6 then 99866
when mycasefield = 7 then 99867
when mycasefield = 8 then 99868
when mycasefield = 9 then 99855
when mycasefield = 10 then 99839
end,
alt_min,
alt_max,
longitude,
latitude
(
Select MTB.LocationID
MTB.model_ID
MTB.elevation, --alt min
null, --alt max
MTB.longitude, --longitude
MTB.latitude --latitude
from MyTblB MTB
);

The error I'm getting is:
Incorrect syntax near '='.

I have tried various versions of the case statement based on examples I have found but nothing works.
I would greatly appreciate any assistance with this one. I've been smacking my head against the wall for awhile trying to find a solution.

View 10 Replies View Related

How To Use Select Statement Inside Insert Statement

Oct 20, 2014

In the below code i want to use select statement for getting customer

address1,customeraddress2,customerphone,customercity,customerstate,customercountry,customerfirstname,customerlastname

from customer table.Rest of the things will be as it is in the following code.How do i do this?

INSERT INTO EMImportListing ("
sql += " CustId,Title,Description,JobCity,JobState,JobPostalCode,JobCountry,URL,Requirements, "
sql += " IsDraft,IsFeatured,IsApproved,"
sql += " Email,OrgName,customerAddress1,customerAddress2,customerCity,customerState,customerPostalCode,

[code]....

View 1 Replies View Related

Insert Statement Which Uses A Return Value From An SP As An Insert Value

Jul 20, 2005

I'm quite stuck with this:I have an import table called ReferenceMatchingImport which containsdata that has been sucked from a data submission. The contents ofthis table have to be imported into another table ExternalReferencewhich has various foreign keys.This is simple but one of these keys says that the value inExternalReference.CompanyRef must be in the CompanyReference table.Of course if this is an initial import then it will not be so as partof my script I must insert a new row into CompanyReference andpopulate ExternalReference.CompanyRef with the identity column of thistable.I thought a good idea would be to use an SP which inserts a new rowand returns @@Identity as the value to insert. However this doesn'twork as far as I can tell. Is there a approved way to perform thissort of opperation? My code is below.Thanks.ALTER PROCEDURE SP00ReferenceMatchingImportAS/*Just some integrity checking going on here*/INSERT ExternalReference(ExternalSourceRef,AssetGroupRef,CompanyUnitRef,EntityTypeCode,CompanyRef, --this is the unknown ref which is returned by the spExternalReferenceTypeCode,ExternalReferenceCompanyReferenceMapTypeCode,StartDate,EndDate,LastUpdateBy,LastUpdateDate)SELECT rmi.ExternalDataSourcePropertyRef,rmi.AssetGroup,rmi.CompanyUnit,rmi.EntityType,SP01InsertIPDReference rmi.EntityType, --here I'm trying to run thesp so that I can use the return value as the insert value1,1,GETDATE(),GETDATE(),'RefMatch',GETDATE()FROM ReferenceMatchingImport rmiWHERE rmi.ExternalDataSourcePropertyRef NOT IN (SELECT ExternalSourceRefFROM ExternalReference)

View 3 Replies View Related

INSERT Statement

May 1, 2007

I was wondering if any SQL people out there know if i can INSERT INTO 2 tables at the same time? I havent found a yes to the question so i thought i would throw it out there and see what everyone has to say. word 

View 3 Replies View Related

Need Help With INSERT INTO Statement...

Jan 4, 2008

I have put together the following code, but am getting a syntax error on the Insert Into statement. Could someone kindly tell me what I am doing wrong? Thanks  1 Protected Sub SubmitButton2_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles SubmitButton2.Click2 authAndSaveToDB()3 End Sub4 Private Sub authAndSaveToDB()5 On Error GoTo errhand6 If connectToDB() Then 'connection to database was successful7 'insert candidate in the database
8 insertCandidate(ddlPositions.Text, txtName.Text, txtBio.Text, conn)9 Response.Redirect("FileUpload.aspx")10
11 Else
12 Response.Write("<font color = red><strong>Database connection failure. Please try again in a few minutes or contact system administrator.</strong></font>")13 End If
14 closeDB() 'end the connection to the database
15 Exit Sub
16 errhand:17 Response.Write("<br>ERROR: " & Err.Description & "<br>")18 End Sub19 Private Sub insertCandidate(ByVal strPositions As String, ByVal strCandidate As String, ByVal strBiography As String, ByVal myconn As OleDb.OleDbConnection)20 Dim cmd As OleDb.OleDbCommand21 Dim strSQL As String
22
23 strSQL = "INSERT INTO Position (Positions,Candidate,Biography) VALUES ('" & _
24 strPositions & "'," & _
25 "'" & strCandidate & "'," & _
26 "'" & strBiography & "')"
27 cmd = New OleDb.OleDbCommand(strSQL, myconn)28 cmd.ExecuteNonQuery()29 End Sub30 End Class
  

View 16 Replies View Related

Insert SQL Statement

Jan 31, 2008

Hi, I am retriving the value time from my database and i have the convert function on it CONVERT (varchar, Time, 8)
When i edit this and try and insert it back to the database i am losing the information. I am not sure how the insert statement shoulld read in order to do this.
Thanks Mike

View 8 Replies View Related

SQL Insert Statement

Feb 14, 2008

Hi forum, currently I insert a mobile phone number into colomn OK but what I need to do is add +61 as a prefix.Users provide 055 555 555, I want to store number as +61 55 555 555 (note this also drops the 0) my SQL skills a little lacking so appreciate all good info, cheers P

View 2 Replies View Related

Insert Statement

Apr 3, 2004

Hi Everyone

I am having difficulties with my first hand coded insert statement. The record inserts BUT the first item VALUE is selected for all the drop down lists ( 3 of them are optional) I have Prerenders on the page to insert a null value at the top of the list. For the dropdown that is mandatory it only enter first item. Thats without specifying type. As soon as I specify type I get - Input string not in correct format - doesn't actually tell me which one!!!!!! All char types match the database.

Here is my insert:



Sub Add_Click(sender as object, e as EventArgs)

Dim conBooks As SqlConnection
Dim strInsert As String
Dim cmdInsert As SqlCommand

conBooks = New SqlConnection( System.Configuration.ConfigurationSettings.AppSettings("conFantasy") )
strInsert = "INSERT INTO dbo.Books (ISBN, BookTitle, AuthorID, AuthorType, author2, author3, Series, VolNo, Synopsis, PubYear, PubDate) VALUES (@ISBN, @BookTitle, @AuthorID, @AuthorType, @author2, @author3, @Series, @VolNo, @Synopsis, @PubYear, @PubDate )"

cmdInsert = New SqlCommand( strInsert, conBooks )

' Add Parameters
cmdInsert.Parameters.Add( "@ISBN", SqlDbType.nvarchar).Value = txtISBN.Text
cmdInsert.Parameters.Add( "@BookTitle", SqlDbType.nvarchar).Value = title.Text
cmdInsert.Parameters.Add( "@AuthorID", SqlDbType.int).Value = AuthorID.SelectedItem.Value
cmdInsert.Parameters.Add( "@AuthorType", SqlDbType.char).Value = AuthorType.SelectedItem.Value
cmdInsert.Parameters.Add( "@author2", SqlDbType.int).Value = author2.SelectedItem.Value
cmdInsert.Parameters.Add( "@author3", SqlDbType.int).Value = Author3.SelectedItem.Value
cmdInsert.Parameters.Add( "@Series", SqlDbType.nvarchar).Value = Series.SelectedItem.Value
cmdInsert.Parameters.Add( "@VolNo", SqlDbType.int).Value = volumeno.Text
cmdInsert.Parameters.Add( "@Synopsis", SqlDbType.ntext).Value = txtSynopsis.Text
cmdInsert.Parameters.Add( "@PubYear", SqlDbType.bigint).Value = pubyear.Text
cmdInsert.Parameters.Add( "@PubDate", SqlDbType.nvarchar).Value = PubDate.Text


conBooks.Open()
cmdInsert.ExecuteNonQuery()
conBooks.Close()

Response.Redirect("/admin/default.aspx")
End Sub

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved