Concatinate A String In SSIS
Nov 30, 2007
I have a query in SSIS which works fine.
SELECT SUBSTR(DOB_CHAR, 7, 2) AS EXP3, SUBSTR(DOB_CHAR, 5, 2) AS EXPR1, SUBSTR(DOB_CHAR, 1, 4) AS EXPR2
FROM WAITLIST
results
20
12
1948
07
09
1982
29
07
1960
However, when I try to concatinate, it falls over
SELECT SUBSTR(DOB_CHAR, 7, 2) + '/' + SUBSTR(DOB_CHAR, 5, 2) + '/' + SUBSTR(DOB_CHAR, 1, 4) AS EXPR2
FROM WAITLIST
The syntax works ok on SQL Server query, but not in SSIS.
(Reading from Oracle, number 19481220, an is varchar2)
View 5 Replies
ADVERTISEMENT
Nov 29, 2000
Dear all
I wonder if one can provide a little code on checking a string in a column 'Column1' of table 'table1', if it does not contain sequence of the characters 'ABC.' to add it to each record in the column 'column1'.
Many thanks
Saad
View 1 Replies
View Related
Sep 22, 2006
RITESH writes "sir ,
i am in a problem ,plz help me ,
my question is i want to make a query in which there is two table containing column vrdt, power_remark
format is like this---
table1
vrdt remak
09/09/06 a
09/09/06 b
answer format will be
table 2
vrdt remark
09/09/06 ab"
View 8 Replies
View Related
Jan 24, 2008
Hi,
I'm new to the forum, and semi new to sql, I've been working with
it for about 1 year now, but from a programmers side. I simply
just plug in my selects, and inserts, but most of my work is in
asp.net. I apologize if I have posted in the wrong forum section.
Here is my problem....
I have a table that has the follwing columns..
UserName, question1, question2, Id
question1 and question2 columns simply hold either 'Y' or 'N'
Meaning that the user either answered Y or N for the questions.
I'm trying to create another column on the fly... example....
select *,
[othercolumn] = case question1
when 'Y' then 'question1,'
else ''
end
from mytable
If both questions1 and questions2 have the column value of 'Y', then
the othercolumn should have 'question1,question2' as the end of the above select.
The above example only works for checking for question1, but I will need
to do the same for question2 and concatinate that into the othercolumn column.
I hope, I have explained myself well.
Please let me know if you need more info from me.
View 3 Replies
View Related
Jul 20, 2005
I have a need to concatenate all Descriptions from a select statementSELECTt_ReviewSection.PeerRevSectionDescriptionFROMt_ReviewSectionWHEREt_ReviewSection.PeerRevID = @lngRevIDORDER BYt_ReviewSection.PeerRevSectionOrderI want to return a single string "section1, section2, section3, section4"based on the multiple rows returned.Any ideas
View 5 Replies
View Related
Jan 31, 2008
I am novice in SSIS. Recently I migrated some dts packages into sql 2005. Now I need to change connection string. But I am not sure how to change it. I am wondering, if any one can help me.
View 11 Replies
View Related
Jan 29, 2007
I am very new to SSIS though I have written hundreds of SQL 2000 dts' with all kinds of active scripts doing all kinds of things. I am now trying to convert them to SSIS and since scripts don't come through the migrator I am doing them by hand once again. I have the package created, but one of the input fields on the text file is YYYYMMDD , but the database field it is going into is a datetime so I need to convert it to a valid date format so that the conversion will take place. I tried data conversion task but that doesn't work, now I'm assuming I need to use the derived column, but not sure and don't have a clue how to use that, can anyone help? Thanks bostonrose
View 2 Replies
View Related
Jan 24, 2007
Hi
I have been trying to resolve a connection string issue all day, and havent figured out whats the problem. I keep getting the Acquire Connection error everytime I run my package. Can you someone review the format of my connection string, and confirm that it is indeed the correct format:
I have two conn strings specified in my config file, one is to connect to a remote database and one is for local. I have validated the connectivity from my server to these databases via Management Studio, and it seems to connect fine. But when I run my package it keeps failing.
SQL Server Authentication(Remote Database Server):
Data Source=server_name;Username=useraccount;Password=xxxxx;Initial Catalog=dbname;Provider=SQLNCLI.1;
Windows Authentication(Local Database on the server):
Data Source=xxxxxx;Initial Catalog=xxxxx;Provider=SQLNCLI.1;Integrated Security=SSPI;
I would really appreciate if someone can help me with this, I have been trying to troubleshoot this all day today, and still havent had any luck. Thanks.
View 27 Replies
View Related
Apr 1, 2008
I have been trying to read a flat file which has a birthdate field. The field is string and the format is "011594". I have been trying to convert it to a date field in the following format "01/15/1994". Using the forum I was able to write the following expression but I am still keep getting error messages.
I also noticed few records are missing birthdate and few do not have the complete birthdate which means some birthdates are missing year and some are missing month. For example, some are completely missing and some are partially missing, like " " or "0312 ". Could this be the reason I was getting error message since the following expression does not include null and incomplete date of birth?
(DT_DBDATE)(SUBSTRING([DateofBirth] ,1,2) + "/" + SUBSTRING([DateofBirth] ,3,2) + "/" + SUBSTRING([DateofBirth] ,5,2))
Here are the error messages:
[Derived Column [1014]] Error: An error occurred while attempting to perform a type cast.
[Derived Column [1014]] Error: The "component "Derived Column" (1014)" failed because error code 0xC0049064 occurred, and the error row disposition on "output column "DOB" (2292)" specifies failure on error. An error occurred on the specified object of the specified component.
[DTS.Pipeline] Error: The ProcessInput method on component "Derived Column" (1014) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0209029.
View 13 Replies
View Related
May 13, 2008
Being a newbie to SSIS I'm not sure of the most efficient method of converting a DateTime object to a String.
I'm from a C# background where this would be easy using DateTime.ToString("YYYYMMdd"). I want to use the date in a file name so don't require most of the parts.
I'm sure I could do this using a script task to produce a file name for each row of data in my table and add that filename to the dataset but it seem like overkill to do something that should be simple. Also as I'm supposed to be getting to grips with SSIS I shouldn't keep running back to what I know.
My current approach is to derive a column and build up an expression to convert the date into a string. The only problem being that it doesn't work.
The expression I'm working with is:
(DT_WSTR, 50)([OrgName] ) + "_" + (DT_WSTR, 50)( [PayrollName] ) + (DT_WSTR, 4)(YEAR( [ProcessedDate] )) + (DT_WSTR, 2)(MONTH( [ProcessedDate] )) + (DT_WSTR, 2)(DAY( [ProcessedDate] )) ".txt"
Can anyone see where I'm going wrong?
All comments greatly received.
Cheers
Ben
View 8 Replies
View Related
Feb 5, 2007
Hi!
I create a SSIS Package for ETL on my own machine. During development database was also on my machine. For access to this database an OLE DB connection was defined within a package in BI Development Studio. Everything worked well both in debug mode and testing package itself.
Finally I need to load data to a database on a different machine using this package.
I used several scenaries:
1) simply copied the package-file to estination machine, open it for execution, in section "Connection Managers" I edited connection string manually - changed server name and Initial Catalog. And try to execute.
2) on the destination machine I manually created an OLE DB connection (using Microsoft Data Link) to a different database (test succeded), Changed the extention of the connection file 'udl' for ' txt ' and copied its connection string to the field connection string in section "Connection Managers" (pointed in variant 1) ).
3) use Package Configurations, copied the deployment to destination machine, installed the package the way like written here - http://msdn2.microsoft.com/en-us/library/ms365338.aspx. Changed exported properties - Server name, Initial Catalog and also the whole Connection String. Also try to execute.
In all cases I recieved the same error execution message :
"Errors in the metadata manager. Either the database with ID of " OLD_DATABASE_NAME " does not exist in the server with ID of " NEW_SERVER_NAME " or the user does not have permissions to access the object."
As for access (username/pass) settings they are the same for both of them, I have the same administrative rights on both machines. And more with the same rights the ole db connection made was made manually in variant 2 - succeded!!! So I don't think the problem is here.
As for Error message - I think somewhere the OLD name of database (Initial Catalog) is saved, though I tried to change it. Though the NEW value for the server name is substituted.
Please, help me. I don't know what else can I try. And it is not a single case for my practice. So I think - something wrong in my actions.
View 9 Replies
View Related
Sep 25, 2006
Greetings,
I have written a SSIS package which does the following:
- An 'Execute SQL Task' uses an OLEDB connection to execute a Stored Procedure in SQL Server 2005
A SSIS user defined variable named @SourceSQLStatement is passed to the Stored procedure as an OUTPUT
This variable is a string Data Type
- The Stored Procedure generates an SQL command and saves it in the variable
This variable is defined as @SourceSQLStatement nvarchar(4000) OUTPUT
The varible is then returned to the SSIS package
When the package is executed the variable does not contain the entire SQL command.
When I check in the Locals window during Debug, the contents seem to have been truncated:
+ User::SourceSQLstatement {SELECT a.FailureID, a.ExceptionHandlerID, a.FailureTypeCd, a.AccountNbr, a.AccountNm, a.CaseNbr, a.CustNm, a.AssociateNm, a.TargetSysNm, a.FailureDt, a.FailurePointTxt, a.SubmittedByNm, a.ErrorMsgTxt, a.CreateId, a.CreateDt, a.UpdateId, a.UpdateDt FROM GSPIntegrationException a WHERE a.CreateDt >= (select max(ETLC.RunDt) from X141572_ETLSTAGING.dbo.ETL ETL inner join X141572_ETLSTAGING.dbo.ETLControl ETLC on ETL.ETLID = ETLC.ETLID inner join X141572_ETLSTAGING.dbo.ETLRun ETLR on ETLC.ETLID = ETLR.ETLID an} String
The fully generated SQL command does not exceed the 4000 character length provided in the stored procedure.
Has anyone encountered this issue before?
Any help would be greatly appreciated
Thank You
View 4 Replies
View Related
Apr 7, 2008
Hello Everyone,
How can I convert the string column to date in SSIS.
Example:
I have a column which is having a value as €ś19890213€?
Basically this values is a date
Now I wanted this value to be a date value as €ś01/01/2007€?
i had try it out by doing this ways
(DT_DATE)(SUBSTRING(DATE_SEEN_SPEC,5,2) + "/" + SUBSTRING(DATE_SEEN_SPEC,7,2) + "/" + SUBSTRING(DATE_SEEN_SPEC,1,4))
but still i'm getting the error message.
I know the this can be achived through type cast in Derived Column compunent, but not sure with which cast please help me out in resoulving this issue.
Thank you
View 1 Replies
View Related
Jan 14, 2008
Can any one please help me. how to pass the database connection through variables to SSIS.
And also calling SSIS from visual studio.net
Regards
Ravi
View 1 Replies
View Related
Apr 22, 2008
I tried using derived collumn it did not work. I also tried data conversion transformation which did not work.
Can any one suggest me some other method.
Thanks.
View 6 Replies
View Related
Aug 30, 2007
In SSIS, what is the maximum size of the String variable (one that you would define in the Variables dialog box)?
View 13 Replies
View Related
Feb 20, 2008
I have a RPC which gives me multiple - single record rows like
Robert|K|Half|TX|1123823|1423904 -- This is one such record that i get in 1 Column
Now I need to split the above record into 6 Fields and populate in my local DB
I know i could use any .NET Language and accomplish this. But Iam limited to using SSIS/T-SQL Proc's
Any ideas / directions?
View 6 Replies
View Related
Jun 7, 2007
Hi,
I want to trim new line from string in sql server 2005...
I prepared one dtsx package and in that I want to trim new line from one of my column but i am unable to do that.
for example:
I want to retrive one column name DESCRIPTION and put that in text file but along with it I am getting blank space and new line also that I want to trim...
T.I.A
View 1 Replies
View Related
Jul 28, 2015
I am using OLE DB source to extract data from Oracle. I have query (sample) like below, but SSIS is converting ID as Unicode String [DT_WSTR]. Why is that? and how to avoid this?
SELECT
1 AS ID
FROMÂ
ORACLE_TABLE
View 3 Replies
View Related
Nov 30, 2015
I am trying to upload data from CSV to Sql table. I have a column as 'arrived_date' value '13:45' etc and while trying to load data i am getting error as "data conversion failed ,truncation may occur while loading data". In flat file connection this column datatype is string but in my table datatype is as time(). There is a error with conversion. I tried to change data type in advanced editor but no use. Using data conversion after flatfile makes my error disappear but it is giving error right at the file not even going through from file?
View 10 Replies
View Related
Oct 4, 2015
I have my SSIS package that reads elements from a Sharepoint list to a SQL table. The data type of my source is string and the destination is integer. The source column can sometimes be an empty string "" (not a required column)
Which expression to use and "where" or "what" SSIS component can I add this expression to? Like I know that I can use the "Conditional Split" to filter the data so for my expression which component can I use?
View 2 Replies
View Related
Jun 19, 2006
Hi
I need help for Connection string:
Requirement: When we create SSIS Pacakge using Businessinteligence studio.Each Source and Destination or whatever we using the Control required DB Connection.
we connect theDB server and Database Table through manaully .Instead of Manual i need dynamic Global varible for Connection String .How to achieve this connection string.
because suppose we create SSIS Package in Developement Server Latter We change the Server from Developement to Another Testing Server . at that time we dont requierd for changing manulay.any one pls reply me.
Same as in Dotnet we give configiration XML file .we gave the Connection strng. how to in SSIS we do?
Thanks & Regards
M.Jeyakumar
View 9 Replies
View Related
Mar 19, 2014
 "variables in SSIS for setting any connection string". I tried to Google it but cannot find any specific link.
View 4 Replies
View Related
May 27, 2015
The below connection string works fine for windows authentication.
Data Source=Test123;Initial Catalog=Globe;Provider=SQLNCLI10.1;Integrated Security=SSPI;
what changes i should make in the above connection if i have sql server authentication mode?
View 2 Replies
View Related
May 20, 2015
I am trying to convert a string variable to integer in SSIS using the expression task.
@[User::Nummer] = (DT_I4) @[User::Name]
But I get an error that the conversion from (DT_WSTR) to (DT_I4) is not possible!!
View 2 Replies
View Related
May 8, 2007
Hello.
I have packages that must generate log errors dynamically including time of execution and the name of the task.
I make it changing the properties of the connection inserting two expressions.
1.-I alter the File Usage Type to 1 to generate this files.
2.- I alter the connection string as: @[User::myvariable] +"constant_description"+ time description+ +".txt"
The time description is :
(DT_STR,40,1252) DAY (GETDATE())+"-"+(DT_STR,40,1252) MONTH( GETDATE())+"-"+(DT_STR,40,1252) YEAR( GETDATE())+" + REPLACE( (DT_STR,10,1252) (DT_DBTIME) GETDATE(),":","_")
But it is not the problem
In those packages I have one connector for all the tasks and in execution time it creates one file for each of the tasks.
The problem is the way I insert in the filename the task name.
I have a pre-execute event handler in each task that modifies a string variable( myvariable) appending the task name. When I execute de package it works great but when I only execute a task, the program do not enter in the event and do not put the task’s name.
How can I put that name without using that handler? There is another handler can I use to do it that happens before the system generates the new file name and after pre-execute? Anyone knows another way to do this kind of things?
View 3 Replies
View Related
Sep 6, 2007
Hi i am working on sending data from a dat file to table in sql server Database and i am using the Data conversion transformation in ssis to convert string of fixed length into numeric (11,5) which is the datatype for the price field in the table and its returning an error saying that status vale 6 and error text as Conersion Failed sue to overflow of specific type ... Can anyone let me know how to overcome this error.
View 6 Replies
View Related
Nov 28, 2007
I have a SSIS package that opens an xml file, puts the contents into a string, then runs a stored procedure that dumps it into an xml column in a table. One of the xml files is huge. Putting the data into a ssis string causes an error. The length of the string variable is 58,231,886. The file will only get bigger.
How else can I get this data into a SQL Server XML field.
View 1 Replies
View Related
Jul 12, 2012
I have create packages which loads the data from flat file to sql server table, now I want to make my destination table connection dynamic what is format of connection string. I also need to pass user name and password for sql server dynamically in this case, what is the format for the connection string.
Also  in package i used ADO.net  as source for  *.mdb files how i can set the commection to .mdb files dynamically which is used as source in my package.
View 8 Replies
View Related
May 29, 2015
I am using SSIS 2012 SP1 to import a comma delimited csv file into a SQL table.
One of the fields carries a time value:
Source = textfile, column=DT_STR(8), value format = "hhmmss", e.g. "011525"
Destination = field in SQL table, data type = time(0)
To get it from the textfile to the SQL table I am:
1.) Creating a derived column called [d_Time of Entry]with the following formula -
SUBSTRING([Time of Entry],1,2) + ":" + SUBSTRING([Time of Entry],3,2) + ":" + SUBSTRING([Time of Entry],5,2)
2.) Performing a data conversion task to convert [d_Time of Entry] from DT_STR(8) to time(0) The upload fails because values that start with a zero, i.e. times before 10am, have their leading 0's stripped before being derived. You can see this because "011525" is derived as "11:52:5" when it should be "01:15:25".
View 10 Replies
View Related
Nov 5, 2015
I am downloading a webpage as a text file in order to read a specific string to assign it as a variable/parameter in order to create an output file name. I would like to know how would I be able to look for a specific string and output as another variable for the rest of the package.
2015 Conforming Loan Limits
------------------------------------------------------------------------
o _Loan Limits for Calendar Year 2015--All Counties _[XLS]
</DataTools/Downloads/Documents/Conforming-Loan-Limits/FullCountyLoanLimitList2015_HERA-BASED_FINAL_FLAT.xlsx>_ ,
_[PDF]
</DataTools/Downloads/Documents/Conforming-Loan-Limits/FullCountyLoanLimitList2015_HERA-BASED_FINAL.pdf>_
​ o _List of 46 Counties with Increases in Loan Limits for 2015
[Code] ...
To explain it a more better way, I have a sample webpage text here. I should be searching for "FullCountyLoanLimitList" appended by the current year (like FullCountyLoanLimitList2015) and copy the entire file name in the text file and assign it to another variable so that I can download that specific file using WebClient connection.
View 4 Replies
View Related
Jun 26, 2006
Hi ,
I am Using Derived column between Source and Destination Control. the Source input column PriceTime is String Data type. but in the Destination is should be a DATE TIME column. How to Convert this string to DateTime in the Derivied Column Control.
I already tried to in the Derived column control
PRICEDATETIME <add as new column> ((DT_DBTIMESTAMP)priceDateTime) database timestamp [DT_DBTIMESTAMP]
But still throwing Error showing type case probelm
Pls help me on this
Thanks & Regards
Jeyakumar.M
View 23 Replies
View Related
