Connect To S400 Using SSIS
May 29, 2006
Dear all
In my server had instaledd driver for ibm ole db connection "IBM DB2 UDB for Iseries IBMDASQL OLEDB Provider " and "IBM DB2 UDB for Iseries IBMDARLA OLEDB Provider " and "IBM DB2 UDB for Iseries IBMDA400 OLEDB Provider ". If i using dataflow and make connection with oledb and make query using query builder it's succesfully, but if i click column or OK or preview button display warning "cannot retrieve the column code page info from the OLE DB Provider". any one can help me
View 2 Replies
ADVERTISEMENT
Feb 16, 2006
Hi,
I'm evaluating SQL server 2005 for planning a upgrade of our datawarehouse from SQL 2000 to 2005.
We use a lot of DTS pacakages so that's my primary focus right now.
I get this strange error when trying to connect to SSIS -> Stored Pacakges -> MSDB:
TITLE: Microsoft SQL Server Management Studio
------------------------------
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
Login timeout expired
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
Named Pipes Provider: Could not open a connection to SQL Server [2]. (Microsoft SQL Native Client)
------------------------------
Login timeout expired
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
Named Pipes Provider: Could not open a connection to SQL Server [2]. (Microsoft SQL Native Client)
------------------------------
BUTTONS:
OK
------------------------------
The install is on a x64 2003 with a x64 enterprise edition, with two instances. So what msdb is it trying to connect to since I can't seem to see this anywhere in management studio?
Initially installed the two instances without named pipe support (only tcpip), but the naitive client was configured for named pipe support. I have now enabled named pipe support for both instances as well and afterwards restarted the server, but the problem persists.
I've also checked the two instaces to verify that they allow remote connections, as well as doubling the query timeout period to 1200.
I managed to move via DTS backup (non ms tool) a package from a test server onto the 2005 instance under Management -> Legacy -> DTS. Then I ran a migration of the imported pacakge and that ran smoothly as well.
So now I would just like to see the result of the converted pacakage.
Any clues to what I do wrong?
Best regards
SUN
View 12 Replies
View Related
May 20, 2008
HI,
I am unable to connect SSIS using Sql Server Management Studio.The fallowing error is getting.
TITLE: Connect to Server
------------------------------
Cannot connect to GDC-101.
------------------------------
ADDITIONAL INFORMATION:
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
Connect to SSIS Service on machine "GDC-101" failed:
The specified service does not exist as an installed service.
.
------------------------------
Connect to SSIS Service on machine "GDC-101" failed:
The specified service does not exist as an installed service.
.
------------------------------
BUTTONS:
OK
------------------------------
Can Any one help me.
Regards
Sith.
View 3 Replies
View Related
Aug 22, 2006
I am having trouble connecting dbf of version dbase II. I can connect dbase III and dbase IV in ssis package,but can't connect dbase II.hope your help!
View 3 Replies
View Related
May 11, 2006
Hi All,
Does anyone try to create a task in SSIS extract data from Oracle10g to SQL Server 2005?
Regards,
Nicol
View 7 Replies
View Related
Oct 6, 2010
How to connect SSIS to SAP BW.
View 1 Replies
View Related
Apr 3, 2006
I got following error when try to expand msdb under SSIS in SSMS, the SSIS I connected to is on clustered server. The windows account used is member of local admin on both nodes in the cluster and sysadmin in sql. I tried with host name that SSIS runs on and virtual sql server name for connection, tried connect from remote client machine and server itself, got same error:
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
Login timeout expired
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
Named Pipes Provider: Could not open a connection to SQL Server [2]. (Microsoft SQL Native Client)
Login timeout expired
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
Named Pipes Provider: Could not open a connection to SQL Server [2]. (Microsoft SQL Native Client)
Anyone knows what's happen? Thanks.
View 3 Replies
View Related
May 17, 2007
MS Access database was one of the standard data connections in DTS. Excel is listed as a scourc/destination, but access is not. Question:
What is the best connection to use for MS-Access databases for output of data?
We generally process the ETL in SQL server then, export to Access database.
THANKS!!
Dave
View 3 Replies
View Related
Jan 25, 2007
I originally posted this issue on the SSIS forum and it was suggested I cross post here. I'm trying to connect to the MSDB database on a remote SSIS server using the integration services connection listed in the drop down box on SQL Server 2005 Management Studio. Every connection attempt ends with an 'Access Is Denied' error message. I have full db_dtsadmin rights on the remote server. We followed the MSDN whitepaper on connecting to a remote SSIS server (the section on eliminating the Access Is Denied error - configuring rights for remote users). Nothing works, I always get the generic access denied error message. Are there other permissions that need to be assigned in conjunction with db_dtsadmin to get this to work? I wonder if there is something simple we're overlooking.
Thanks.
View 4 Replies
View Related
Apr 10, 2008
Hi,
I want to connect to SFTP server and download files using SSIS. I know ssis doesn't support sftp connection. I was told i can use putty to do the job(I dont want third party components).
Is it possible you guyz show me how to do this, using a tutorial or how to create the batch file and call it in ssis package.
thanks.
View 9 Replies
View Related
Oct 23, 2007
hi guys,
do you know if we can use sql authentication to connect to SSIS through SSMS. right now it's only windows authentication, and SQL authentication is grayed out.
Not sure if this question has already been answered because it sounds like easy question.
View 1 Replies
View Related
Jul 10, 2007
Hi All,
I am trying to connect to DB2 database via OLE DB connection manager in SSIS. But when I enter the SQL Query and press OK it gives following error
"Error at Data Flow Task - Header Load [OlE DB Source - Header_Load[1]]": An OLE DB Error has occured. Error Code: 0x80040E21
Additional Information:
Exception from HRESULT: 0xC0202009(Microsoft.SqlServer.DTSPipelineWrap)"
I followed following steps: -
1. I created OLE DB provider and tested the connection, it was successful(with give username and password)
2. Created query in Build query as following and tried executing it. It worked! Query used was
SELECT SRC_ID, ORG_ID FROM DB123.DEAL_HEADER
3. But when, in OLE DB Source Provider Task, when I press preview, It thorws the above error!
Kindly let me know, Because I am stuck at that point.
Thanks
Sid
View 9 Replies
View Related
May 21, 2008
I am trying to access Cube through SSIS and have been unable to set SSIS package with the work around provided here (https://connect.microsoft.com/SQLServer/feedback/ViewFeedback.aspx?FeedbackID=219068). On pasting the MDX query using the openrowset command on the OLEDB source editor, I get a pop up window with error 0x08000405 and the message that says 'syntax used for openrowset is incorrect'
I also tried running this on SQL Management studio but, get the following error.
OLE DB provider "MSOLAP" for linked server "(null)" returned message "An error was encountered in the transport layer.".
OLE DB provider "MSOLAP" for linked server "(null)" returned message "The peer prematurely closed the connection.".
Msg 7303, Level 16, State 1, Line 3
Cannot initialize the data source object of OLE DB provider "MSOLAP" for linked server "(null)".
The server where the cube resides is on 64bit machine and I have 32-bit..could this be the reason for the issue?
I found this article on microsoft support website (http://support.microsoft.com/kb/947512 ) which describes the possible symptoms and causes for connectivity issues But, couldn't find a work around for it.
Here is the syntax of the query I am using in SSIS and query analyser
SELECT * FROM
OPENROWSET('MSOLAP', 'Integrated Security=SSPI;Persist Security Info=True;Data Source=<SERVERNAME>; Initial Catalog=<Catalog name>;'
,
'MDX Query') AS Rowset_1
Any help with this issue is appreciated!
Thanks,
View 1 Replies
View Related
Jun 27, 2006
We are trying to take advantage of the new Security Context for SSIS but users are unable to connect remotely to the SSIS Service unless they have been added to the Administrators Users Group on the server. I have tried adding them to Guests, Power Users, Remote Desktop Users, Users and SQLServer2005DTSUser$machine but the user is unable to connect.
The message received when the user is unable to connect is:
Cannot connect to 192.x.x.x
Additional Information
-> Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
-> Connect to SSIS Service on machine "192.x.x.x" failed:
Access is denied
What is the list of permissions and privileges that a user that does not belong to the server's Administrator group and have sysadmin server role, must have to allow them to create and run a package through SSIS.
View 6 Replies
View Related
Feb 10, 2008
Hi
I have a problem to connect to TeraData from SSIS.
I have the TeraData client (Query Man) that I connect to the TeraData using ODBC connection. When I connect with Query Man I can see the objects (views) of the correct scheme. However, when I try to connect with SSIS using the same ODBC connection €“ I don€™t see the objects of the specific scheme. The way that I connect to TeraData using SSIS is creating DS connection (with odbc) and then I create DSV €“ where this is the point that I can see lots of other schemes objects, but not the scheme€™s objects that I can see in the Query Man.
Can anyone assist?
Thanks,
Mario
View 5 Replies
View Related
Mar 14, 2007
Hi,
I€™m using a Script Component in SSIS to call a Web Service. The web service is wrapped, using the wsdl tool. The package works, on my local enviroment. Script component calls the web service and returns the data. I€™ll move the web service to another server, web service as Anonymous access is enable. Deployed the Package on a SQL server. But, when excuting the package I get the below error. I can view and invoke the web method and see data even. SSIS is running under a NT AUTHORITYNetworkService account. I know that the problem is permission, but how would I resolve the issue.
Error:
OnInformation,SERVER,DOMAINSqlAdmin,MISPackage,{190832FB-4FF1-4ECD-BF53-4A49864089B4},{D7BF27CD-BDF1-418A-ABFE-BA0A24B921FB},3/14/2007 10:59:11 AM,3/14/2007 10:59:11 AM,0,0x,System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at ScriptComponent_6386cd9eab6a49e7b1a90f69dcc24beb.Service.GetMISAccounts()
at ScriptComponent_6386cd9eab6a49e7b1a90f69dcc24beb.ScriptMain.CreateNewOutputRows()
Any Help will be appreciated
View 1 Replies
View Related
Sep 22, 2015
I want to connect to an Informix Database via SSIS to read and store data. I did some search online and have downloaded Informix ODBC Drivers. I installed the drivers and am trying to configure a System DSN but have few doubts on what each field indicate. URL... I am not sure on what to enter in fields like IBM Informix Server, Service Name? Connecting to Informix DB via SSIS?
View 4 Replies
View Related
Oct 9, 2007
I am working with the IT department at a client site trying to hook into Oracle. We are using Windows Server 2003 64-bit, SQL Server 2005 Standard 64-bit, Oracle 10-g 64-bit and Linux Red Hat 64-bit. All service packs are current.
We are working on a data warehouse project where we need to import Oracle information periodically throughout the day and integrate it in a central location with data already residing in SQL Server. This is the first time I have tried to pull data from Oracle. The databases in Oracle and SQL Server that we are pulling data from are third party application databases.
My client cannot connect to Oracle using Crystal ODBC connections. When we use either the .NETor OLEDB connections, we get the "client tools need to be installed" message. We do have the client tools installed on the WIndows Server that SQL Server is installed on. We can connect to Oracle from this locattion using Aqua Data Studio and SQL *PLUS. I checked and there is only one tnsnames.ora file on the server. I used the name from there to try to connect using SSIS. Still no luck.
I did see somewhere that there is a possible issue with 64-bit installations. We really need to get this connection working.
Thanks!
Jeanne :-)
View 2 Replies
View Related
Feb 22, 2007
Hello,
how can I connect to a cube (on a SQL 2005 server) and get (fact) data to process with SSIS? I looked at the toolbox but I see no applicable tool. It would be fine if somebody can provide a link to an article or example.
Thanks in advanced!
-flyall-
View 5 Replies
View Related
Nov 8, 2006
Greetings all,I cannot connect to my SSIS service from Management Studio. This is on my local machine, which is my "sandbox" and preliminary development platform.
There are slightly different error messages and extended information returned depending on whether I connect using "localhost" or my explicit machine name.
I have tried registering MSXML*.dll as suggested elsewhere in these forums. I've also tried the DCOM config changes suggested elsewhere in these forums (or someone's blog?) - can't find the link at the moment.
This is all on the same machine and I am a local admin on this machine.
Anyone seen this? Anyone have any suggestions. I'd appreciate any tips.
Regards,
Tom
<< LocalHost - Copy Message Text >>
TITLE: Connect to Server
------------------------------
Cannot connect to localhost.
------------------------------
ADDITIONAL INFORMATION:
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
Connect to SSIS Service on machine "localhost" failed: Class not registered.
------------------------------
Connect to SSIS Service on machine "localhost" failed: Class not registered.
------------------------------
BUTTONS:
OK
------------------------------
<< LocalHost - Show Technical Details >>
===================================
Cannot connect to localhost.
===================================
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
Program Location:
at Microsoft.SqlServer.Management.Smo.Enumerator.Process(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
Connect to SSIS Service on machine "localhost" failed: Class not registered.
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Application.GetServerInfo(String server, String& serverVersion)
at Microsoft.SqlServer.Dts.SmoEnum.DTSEnum.GetData(EnumResult erParent)
at Microsoft.SqlServer.Management.Smo.Environment.GetData()
at Microsoft.SqlServer.Management.Smo.Environment.GetData(Request req, Object ci)
at Microsoft.SqlServer.Management.Smo.Enumerator.GetData(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.Smo.Enumerator.Process(Object connectionInfo, Request request)
===================================
Connect to SSIS Service on machine "localhost" failed: Class not registered.
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Wrapper.ApplicationClass.GetServerInfo(String bstrMachineName, String& serverVersion)
at Microsoft.SqlServer.Dts.Runtime.Application.GetServerInfo(String server, String& serverVersion)
<<ExplicitMachineName - Copy Message Text >>
TITLE: Connect to Server
------------------------------
Cannot connect to TOM-H.
------------------------------
ADDITIONAL INFORMATION:
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
Connect to SSIS Service on machine "TOM-H" failed: Class not registered.
------------------------------
Connect to SSIS Service on machine "TOM-H" failed: Class not registered.
------------------------------
BUTTONS:
OK
------------------------------
<< ExplicitMachineName - Show Technical Details >>
===================================
Cannot connect to TOM-H.
===================================
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
Program Location:
at Microsoft.SqlServer.Management.Smo.Enumerator.Process(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
Connect to SSIS Service on machine "TOM-H" failed: Class not registered.
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Application.GetServerInfo(String server, String& serverVersion)
at Microsoft.SqlServer.Dts.SmoEnum.DTSEnum.GetData(EnumResult erParent)
at Microsoft.SqlServer.Management.Smo.Environment.GetData()
at Microsoft.SqlServer.Management.Smo.Environment.GetData(Request req, Object ci)
at Microsoft.SqlServer.Management.Smo.Enumerator.GetData(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.Smo.Enumerator.Process(Object connectionInfo, Request request)
===================================
Connect to SSIS Service on machine "TOM-H" failed: Class not registered.
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Wrapper.ApplicationClass.GetServerInfo(String bstrMachineName, String& serverVersion)
at Microsoft.SqlServer.Dts.Runtime.Application.GetServerInfo(String server, String& serverVersion)
View 7 Replies
View Related
Nov 3, 2015
I am trying to connect to a Web page from SSIS and I've tried both http connection manager and a Script Task but none of them seems to be working.
I get the following errors:
Through Script Component: Exception has been thrown by the target of an invocation.
Through http connection manager: The remote server returned an error: (503) Server Unavailable.
Here is one of the VB code I've tried:
Public Sub Main()
Dim MyWebClient As New System.Net.WebClient()
Dim proxyObject As New System.Net.WebProxy("BANANA:8080", True)
MyWebClient.Proxy = proxyObject
[Code] ....
And, here is one of the C# codes I've tried:
public void Main()
{
Variables varCollection = null;
Dts.VariableDispenser.LockForRead("User::RemoteUri");
Dts.VariableDispenser.LockForRead("User::LocalFolder");
Dts.VariableDispenser.GetVariables(ref varCollection);
varCollection.Unlock();
[Code] ...
I could open the same web page mentioned in the code manually in all my browsers (IE, Firefox, Chrome).
I am using SQL Server 2014.
View 18 Replies
View Related
May 25, 2007
I have installed a SQL Server 2005 Standard Edition instance with SSIS on Window Server 2003 x64. From my PC, I am able to connect to the Integration Services on the server using Windows Authentication but not with a local SQL login - and the option to change authentication methods is greyed out.
Is it possible to remotely connect to SSIS using a SQL login rather than a Windows login? If so, any ideas or references for configuring it as such?
Thanks.
- Lance
View 1 Replies
View Related
Jul 15, 2015
I've made connections in SSIS to Oracle before by setting up TNS but this latest connection is different.
I've been give an SSL cert that I had to import into the Oracle Wallet Manager and to get connected in 'Oracle SQL Developer' I had to choose connectionType = advanced and drop the following line in the JDBC URL section
jdbc:oracle:oci:@(DESCRIPTION =(ADDRESS = (PROTOCOL = TCPS)(HOST = server.domain.com)(PORT = 2484))(CONNECT_DATA =(SERVICE_NAME = XXXXX)))
So my question is. How can I go about making a connection like this in SSIS?
Just incase it matters, I'm working with OracleClient 11g
View 2 Replies
View Related
Sep 5, 2006
Can I connect directly to Outlook using SSIS? If so is there any white paper or walkthroughs I could follow?
TIA
Tom
View 1 Replies
View Related
Feb 13, 2006
Hi,
i created a SSIS package to import data to a remote sql server, using the following connection string:
"Data Source=My-SQL;User ID=PortalUser;Password=Password;Initial Catalog=TestOMIWarehouse;Provider=SQLNCLI.1;Auto Translate=True;";
and got an error "Login failed".
When i give PortalUser a sysadmin server role, it works. But i don't want to give PortalUser a sysadmin role. Any suggestions? Is sysadmin role required to access a remote server using Sql server authentication?
thanks! Any help would be appreciated.
alea
View 4 Replies
View Related
Sep 18, 2015
how can I connect SSIS 2005 to Progress database?
View 4 Replies
View Related
May 18, 2015
Error: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA) (Microsoft.SqlServer.DTSRuntimeWrap)
Â
Here are the steps I followed:
To configure rights for remote users on Windows Server 2003 or Windows XP
View 10 Replies
View Related
Apr 23, 2015
I have a very simply package using an Excel connection to an XLSX file. It's a straight read of the file and import onto a table.Â
The package works fine in Visual Studio 2008 development and also runs fine when executing on the (server I copied it to) under Integration Services. Â Â
However, under a SQL Agent, the package (32-bit is checked) can not acquire the connection to an excel file.  I use UNC pathing to the file. I've read other posts about similar problems and tried various scheduling options (including Owner of job).  Â
I even tried a to trigger it with a command-line which did not work:Â
"C:Program Files (x86)Microsoft SQL Server100DTSBinnDTEXEC.exe" /sq "our packagesMy_XLSX_File_Import" /SERVER myserver /X86Â /CHECKPOINTING OFF /REPORTING E
All errors are:  "DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0209302."Â
View 4 Replies
View Related
Apr 20, 2015
I'm having an issue connecting to an Oracle database using Visual Studio 2013 - Business Intelligence tools.I am running Windows 7 (64-bit), Visual Studio 2013, and have SQL 2012 Enterprise (64-bit) on my local machine. I downloaded the MS Connectors v2.0 for Oracle found here.  But when I try to add a new connection either through the connection manager or inserting a Data Flow Task and looking for the Oracle connections in the "Other Sources" or "Other Destinations" - neither option is available.I have the 32-bit Oracle client installed, the tnsnames.ora file has been created and I can connect to the Oracle DB through PL/SQL.I see Microsoft Connector for Oracle by Attunity 2.0 in my Programs list - installed for this file: Attunity SSISOra Adapters SetupX64.msi. don't know what else to try to get the connections available.
View 11 Replies
View Related
Sep 21, 2015
I have an SQL Server 2012 with SSIS installed on Windows Server 2008 R2 Core. I'd like to connect remotley to SSIS but I receive the following error. 'The RPC server is unavailable.'
View 2 Replies
View Related
Oct 26, 2007
Hi,
I'm trying to use query parameters with an Oracle OLEDB Source in a data
flow task and I'm having problems.
I've tried formatting the query each of the following ways...
--
select
frq_code,
frq_name,
update_frq,
uptime_frq
from frequency_bcs
where update_frq > ?
and update_frq <= ?
--
Parameters cannot be extracted from the SQL command. The provider might not
help to parse parameter information from the command. In that case, use the
"SQL command from variable" access mode, in which the entire SQL command is
stored in a variable.
Additional information
---> Provider cannot derive parameter information and SetParameterInfo has
not been called. (Microsoft OLE DB Provider for Oracle).
View 7 Replies
View Related
Sep 21, 2015
The following error occurred when trying to connect to 2012/2014 SSIS Server using SSMS remotely. Local connection works fine.Using the info from below link does not resolve the problem. Â Permissions are granted through DCOM. If this cannot be resolved, packages will have to stored on filesystem instead.
URL....Connecting to the Integration Services service on the computer "" failed with the following error: "Class not registered".
This error can occur when you try to connect to a SQL Server 2005 Integration Services service from the current version of the SQL Server tools. Instead, add folders to the service configuration file to let the local Integration Services service manage packages on the SQL Server 2005 instance.
View 6 Replies
View Related
Mar 9, 2006
Hi,
Anyone who can tell me why I get this error !
I can connect to Integration services on the server from another client.
Pls help
//T
View 10 Replies
View Related
