Hello!
I'm looking for some ideas about how
to ensure constraints on multiple rows.
Of course one can use stored procedures and/or triggers while inserting.
Other ideas?
The reason for this question is that it could be hard to ensure,
because if lock level is not high enough, you can get duplicates during concurrency,
if lock level is too high, it can result in deadlocks.
Thanks
Hi there!
I've a few tasks in my dataflow. Some of them are executed depending on an precedence constrain. Works fine.
The problem is following: I want to write a success message (execute SQL task), when all the tasks who have been executed have done this with success. For example, i ve ten tasks, and 2 of them are executed (successfully). This is good, i want to execute my task to write the success message.
I tried to set these precedence constraints with EvalOP = ExpressionOrConstraint, Values = Success and an expression, what returns TRUE, when the task above is not executed (the condition from a precedence constraint above). But the task to write my message will never be executed, because it seems the task does'nt give any result (neither success nor failure) when they ar not executed, and so my AND-Constraint for the success message task will only get TRUE, when ALL task are executed (and successful).
Is there any chance to get somethink like "isSuccess OR IsNotExecuted" into a precedence constraint?
Thanks, Torsten
I have a table that is created based on a heirarch of set criteria and need to number the subsets within. The best way to illustrate what I want to accomplish is through an example.
Rank | Item_1 | Item_2 | Class
---- | ------ | ------ | ------
1 | 1A | 1B | ExactMatch
2 | 1A | 1C | Sub
3 | 1A | 1D | Sub
1 | 2B | 2F | ExactMatch
2 | 2B | 2G | Sub
Is there a way to accomplish this? Any help or suggestions are appreciated.
I apologize for the formatting, but I think you should be able to get the point.
thanks,
Hello
What are your experiences with the alignment of constrains between tasks?
I find it hard to align two task in an exact same vertical or horizontal position.
When you grab the green constrain lines with your mouse, you can see a soft pink dashed line which tels you which way to go with your mouse but it is so hard to get straight lines.
Is there a auto align task feature or something else I don't know of?
How do you guys do it?
Regards,
Worf
Have not found an active general data mining forum yet so asking here.
I'm new to data mining band have been given the task of setting up a data mining system. The problem is that our setup seems pretty non standard and I'm not sure how to use data mining on it or what my expectations should be. The situation is:
We have a large and growing set of strings which we get requests for (> 100,000). The requests have many, mostly nominal (non-numeric), variables associated with them. We can only handle a subset (probably less than 10,000) or the strings at any one time. We want to use data mining to analyze historic requests so we can figure out which strings we are going to handle under a given set of variables. So given that our variable currently have values X1, ..., Xn, what subset should be use given than a large database of historic string requests.
Anyone know what techniques would work well for this kind of problem? This is a quick and dirty kind of project, no special purpose hardware or expensive software on this one. I've been looking at using rapid miner but not sure that it's a great tool in this case.
thanks in advance,
max
I think I'm trying to do a simple query on maximum date.
I've got 100 tools that have been used over the past three years.
Some of the tools are used almost every day. Other tools haven't been used for a month, while other tools haven't been used for a year or more.
Ultimately I'm trying to just find the list of tools whose latest date of use was a year ago.
I have a list of tools and a list of times each tool was used.
I think I'm going to have to do a search that for each tool what was the times it was used. That I can do.
What I'm not sure of is how to then pull only the latest date for each tool.
Once I get that I can then do a query off that result to pull the "oldest latest" date of use.
I have DTSX package where all the Control Flow Boxes are connected by precedence constraints (the Green Lines).
However, only half of them visible!
If I try and add another it says:
Cannot create connector.
Only one workflow can exist between the same two executables.
I don't want to have to drop and create them all the constraints (because there are a lot of them!)
But I can't even do that - since I can't see them, I can't select them; and I don't think I can delete them without being able to select them. Am I missing something? Zooming in makes everything larger, but it doesn't make my Green Lines reappear.
Help!
And yes, I'm using the latest version of everything:-
Microsoft Visual Studio 2005
Version 8.9.50727.762 (SP.050727-7600)
SQL SERVER 2005
9.00.3054.00 SP2 Developer Edition
Hello, is possible Enable or disable constrains in a defined schema? or Alter constrains in a defined schema.
For example in schema1 for user1 the constrains definitions are enabled.
There are another schema called schema2 for user2 and constrains definitions are disabled.
Thanks.
I have the following 2 Sql queries. They both are rowcounts of the same column but based on different criteria. What I want to do is return the two results side by side in separate columns:
-- Subscriptions since Sept. 24th
SELECT count(*)
FROM SiteMemberTable103 s(nolock)
JOIN clientmembertable25 c(nolock) ON s.memberid = c.memberid
WHERE site_firstjoindate is not null
and c.clientunsubscribe = 0
and c.validemailaddr = 1
and s.unsubscribe = 0
-- Subscriptions in February
SELECT count(*)
FROM SiteMemberTable103 s(nolock)
JOIN clientmembertable25 c(nolock) ON s.memberid = c.memberid
WHERE site_firstjoindate BETWEEN '2006-02-01 00:00:00.000' AND '2006-03-01 00:00:00.000'
AND c.clientunsubscribe = 0
AND c.validemailaddr = 1
AND s.unsubscribe = 0
It seems like a UNION ALL should work but it just returns the results in one column. I tried changing the count by specifying a different column for each but that doesn't work either. I also tried writing it as one query and using alias to differentiate the two tables but that just gives me syntax errors. I suspect there is a more elegant way to do this but I'm at a loss. Any help would be greatly appreciated!
Caeanis
I am using SQL Server 2005 and trying to create a linked server on Oracle 10. I used the commands below:
EXEC sp_addlinkedserver
@server = 'test1',
@srvproduct = 'Oracle',
@provider = 'MSDAORA',
@datasrc = 'testsource'
exec sp_addlinkedsrvlogin
@rmtsrvname = 'test1',
@useself = 'false',
@rmtuser='sp',
@rmtpassword='sp'
When I execute
select * from test1...COUNTRY
I get the error. "The OLE DB provider "MSDAORA" for linked server "...." does not contain the table "COUNTRY". The table either does not exist or the current user does not have permissions on that table."
The 'sp' user I am connecting is the owner of the table. What could be the problem ?
Thanks a lot.
I have created a table Table with name as Varchar and id as int. Now i have started inserting the rows like, insert into Table values ('arun',20).Yes i have inserted a row in the table. Now i have got the values " arun's ", 50. insert into Table values('arun's',20) My sqlserver is giving me an error instead of inserting the row. How will you solve this problem?
Hi
I am having a table called as status ,in that table one field is there i.e. currentstatus.
the rows which are having currentstatus as "ticket closed",i want to move those rows into other table called repository which is having same table structure as status table.
I can do programatically.
but is there any way for every 3 months system has to check and do this action means moving to repository table automatically?
Please help me.
Thanks.
I'm inserting from TempAccrual to VacationAccrual . It works nicely, however if I run this script again it will insert the same values again in VacationAccrual. How do I block that? IF there is a small change in one of the column in TempAccrual then allow insert. Here is my query
INSERT INTO vacationaccrual
(empno,
accrued_vacation,
accrued_sick_effective_date,
accrued_sick,
import_date)
[Code] ....
For reasons that are not relevant (though I explain them below *), Iwant, for all my users whatever privelige level, an SP which createsand inserts into a temporary table and then another SP which reads anddrops the same temporary table.My users are not able to create dbo tables (eg dbo.tblTest), but arepermitted to create tables under their own user (eg MyUser.tblTest). Ihave found that I can achieve my aim by using code like this . . .SET @SQL = 'CREATE TABLE ' + @MyUserName + '.' + 'tblTest(tstIDDATETIME)'EXEC (@SQL)SET @SQL = 'INSERT INTO ' + @MyUserName + '.' + 'tblTest(tstID) VALUES(GETDATE())'EXEC (@SQL)This becomes exceptionally cumbersome for the complex INSERT & SELECTcode. I'm looking for a simpler way.Simplified down, I am looking for something like this . . .CREATE PROCEDURE dbo.TestInsert ASCREATE TABLE tblTest(tstID DATETIME)INSERT INTO tblTest(tstID) VALUES(GETDATE())GOCREATE PROCEDURE dbo.TestSelect ASSELECT * FROM tblTestDROP TABLE tblTestIn the above example, if the SPs are owned by dbo (as above), CREATETABLE & DROP TABLE use MyUser.tblTest while INSERT & SELECT usedbo.tblTest.If the SPs are owned by the user (eg MyUser.TestInsert), it workscorrectly (MyUser.tblTest is used throughout) but I would have to havea pair of SPs for each user.* I have MS Access ADP front end linked to a SQL Server database. Forreports with complex datasets, it times out. Therefore it suit mypurposes to create a temporary table first and then to open the reportbased on that temporary table.
View 6 Replies View RelatedHi all,
The following dbo.Tables of Northwind.mdf in my .SQLEXPRESS (SQL Server Management Studio Express) are missing:
dbo.Categories
dbo.CustomerCustomerDemo
dbo.CustomerDemographics
dbo.Customers
dbo.Employees
dbo.EmployeeTerritories
dbo.Order Details
dbo.Orders
dbo.Products
dbo.Regions
dbo.Shippers
dbo.Suppliers
dbo.Territories.
But, I have these dbo.Tables in a different Database "xyzDatabase". How can I copy each of these dbo.Tables to the another blank dbo.Table of Northwind Database?
I right clicked on the dbo.Categories and I saw the following thing:
dbo.Categories
New Table...
Modify
Open Table
Script Table as |> CREATYE To |>
DROP To |>
SELECT To |>
INSERT To |> New Query Editor Window
File....
Clipboard
UPDATE To |>
DELETE to |>
From the above observation,I think it is possible to copy the dbo.Table from the one Database to the Northwind Database that needs to be repaired. Please help and advise me how to do this task or tell me where I can find the Microsoft document that gives the details of this X-copy thing.
Thanks in advance,
Scott Chang
P. S. I am using VB 2005 Express to create a project to learn "Calling Stored Procedures with ADO.NET" (see Paul Kimmel's article in http://www.developer.com/db/article.php/3438221) that needs the dbo.Tables of Northwind Database and my Northwind Database has been screwed up for quite a while and needs a big repair.
which is more efficient...which takes less memory...how is the memory allocation done for both the types.
View 1 Replies View Related'****************************************************************************
Cmd.CommandText = "Drop Table Raj"
Cmd.ExecuteNonQuery()
Cmd.CommandText = "Select * Into Raj From XXX"
Cmd.ExecuteNonQuery()
'**************************************************************************
This generates error that Table already exist.
If Wait 1 sec then execute statement then it works fine.
Thanks in Advance
Piyush Verma
I have one control table to store all related table name
Table ID TableName
1 TableA
2 TableB
In Table A:
RecordID Value
1 1
2 2
3 3
In Table B:
RecordID Value
1 1
2 2
3 3
How can I get the result by select the Table list first and then combine the data in table A and table B?
Thank you!
Just wondering if there is an easy transact statement to copy table 1 to table 2, appending the data in table 2.with SQL2000, thanks.
View 2 Replies View RelatedHi thanks for looking at my question
Using sqlServer management studio 2005
My Tables are something like this:
--Table 1 "Employee"
CREATE TABLE [MyCompany].[Employee](
[EmployeeGID] [int] IDENTITY(1,1) NOT NULL,
[BranchFID] [int] NOT NULL,
[FirstName] [varchar](50) NOT NULL,
[MiddleName] [varchar](50) NOT NULL,
[LastName] [varchar](50) NOT NULL,
CONSTRAINT [PK_Employee] PRIMARY KEY CLUSTERED
(
[EmployeeGID]
)
GO
ALTER TABLE [MyCompany].[Employee]
WITH CHECK ADD CONSTRAINT [FK_Employee_BranchFID]
FOREIGN KEY([BranchFID])
REFERENCES [myCompany].[Branch] ([BranchGID])
GO
ALTER TABLE [MyCompany].[Employee] CHECK CONSTRAINT [FK_Employee_BranchFID]
-- Table 2 "Branch"
CREATE TABLE [Mycompany].[Branch](
[BranchGID] [int] IDENTITY(1,1) NOT NULL,
[BranchName] [varchar](50) NOT NULL,
[City] [varchar](50) NOT NULL,
[ManagerFID] [int] NOT NULL,
CONSTRAINT [PK_Branch] PRIMARY KEY CLUSTERED
(
[BranchGID]
)
GO
ALTER TABLE [MyCompany].[Branch]
WITH CHECK ADD CONSTRAINT [FK_Branch_ManagerFID]
FOREIGN KEY([ManagerFID])
REFERENCES [MyCompany].[Employee] ([EmployeeGID])
GO
ALTER TABLE [MyCompany].[Branch]
CHECK CONSTRAINT [FK_Branch_ManagerFID]
--Foreign IDs = FID
--generated IDs = GID
Then I try a simple single row DELETE
DELETE FROM MyCompany.Employee
WHERE EmployeeGID= 39
Well this might look like a very basic error:
I get this Error after trying to delete something from Table €œEmployee€?
The DELETE statement conflicted with the
REFERENCE constraint "FK_Branch_ManagerFID".
The conflict occurred in database "MyDatabase",
table "myCompany.Branch", column 'ManagerFID'.
Yes what I€™ve been doing is to deactivate the foreign key constraint, in both tables when performing these kinds of operations, same thing if I try to delete a €œBranch€? entry, basically each entry in €œbranch€? and €œEmployee€? is child of each other which makes things more complicated.
My question is, is there a simple way to overcome this obstacle without having to deactivate the foreign key constraints every time or a good way to prevent this from happening in the first place? Is this when I have to use €œON DELETE CASCADE€? or something?
Thanks
In a table-valued UDF, does the UDF use a table variable or a temp table to form the resultset returned?
Banti writes "IF i create temporary table by using #table and ##table then what is the difference. i found no difference.
pls reply.
first:
create table ##temp
(
name varchar(25),
roll int
)
insert into ##temp values('banti',1)
select * from ##temp
second:
create table #temp
(
name varchar(25),
roll int
)
insert into #temp values('banti',1)
select * from #temp
both works fine , then what is the difference
waiting for ur reply
Banti"
I am having a problem in creating query for this exciting scenario.
Table A
ID ItemQtyCreatedDatetime
W001 CB112014-06-03 20:30:48.000
W002 CB112014-06-04 01:30:48.000
Table B
IDItemQtyCreatedDatetime
A001 CB112014-06-03 19:05:48.000
A002 CB112014-06-03 20:05:48.000
A003 CB112014-06-03 21:05:48.000
A004 CB112014-06-04 01:05:48.000
A005 CB112014-06-04 02:05:48.000
I would like to return the nearest date of Table B in my table like for
ID W001 in table B should return ID A002 CreatedDatetime: 2014-06-03 20:05:48.000
ID W002 in table B should return ID A004 CreatedDatetime: 2014-06-04 01:05:48.000
Is there any Posibility to change a User Table to System Table.
How to create one system table.
I am in Big mess that One of the Table I am using is in System Type.
I cant Index the same. Is there any Mistake we can change a user table to system table.....
I have a column defined as smalldatetime. Default length (4), and "allow NULLS" is checked.In the Enterprise Manager UI, when i enter data into that table row, if i just tab past that column, all is well, and the value is represented in the UI as <NULL>.The problem comes once i ever enter a date into that column. Say i have entered a date (all is well), and now i want to remove that entry and go back to NULL (after the date value has been committed, different entry session, say).How is that done?It seems to me, once a date has ever been entered into that column, now, if i try to remove it, i get the error "The value you entered is not consistant with the data type or length of the column, or over grid buffer limit". I have tried deleting the value, entering spaces, entering the string NULL or the string <NULL>; maybe some other tries as well, but none works, i always get that error message and am not allowed to proceed past that cell until i restore a date value to it. I want to get back to <NULL>.Anybody know?Thank you.Tom
View 1 Replies View RelatedI am stuck on finding a solution to transpose source data from a system via a metadata look-up table into a destination table. I need a method to transpose/pivot the source data into columns (which are by various data-types). The datatypes for each column are listed in a metadata table.
Source Data Table:
Table Name: Source
SrcID AGE City Date
01 32 London 01-01-2013
02 35 Lagos 02-01-2013
03 36 NY 03-01-2013
Metadata Table:
Table Name:Metadata
MetaID Column_Name Column_type
11 AGE col_integer
22 City col_character
33 Date col_date
Destination table:
The source data to be loaded into the destination table(as shown below):
Table Name: Destination
SrcID MetaID col_int col_char col_date
01 11 32 - -
01 22 - London -
01 33 - - 01-01-2013
02 11 35 - -
02 22 - Lagos -
02 33 - - 02-01-2013
03 11 36 - -
03 22 - NY -
03 33 - - 03-01-2013
I want Compare two Table data and insert changed field to the third table ...
View 9 Replies View Relatedi am inserting something into the temp table even without creating it before. But this does not give any compilation error. Only when I want to execute the stored procedure I get the error message that there is an invalid temp table. Should this not result in a compilation error rather during the execution time.?
--create the procedure and insert into the temp table without creating it.
--no compilation error.
CREATE PROC testTemp
AS
BEGIN
INSERT INTO #tmp(dt)
SELECT GETDATE()
END
only on calling the proc does this give an execution error
I created am inventory table with few columns say, Servername, version, patching details, etc
I want a tracking of the table.
Let's say people are asked to modify the base table and I want a complete capture of the details modified and the session of the user ( ) who (system_user) is actually modifying the details.
I have 2 tables: Order(ID, Quantity) and Product(ID,Name, Price) and I want to add a calculated field in Order table based on the price column in the Product table. How do i do that?
this query returns the values i want in the table.
select a.quantity * b.price
from tblCustomerPurchases as a
join tblProduct as b
on a.ID=b.ID
SQL Server 2005 SP2 Error: Script failed for Table 'dbo.TableName'
I keep getting this error when trying to generate a snapshot for transact replication.
Here is the publishing table schema:
CREATE TABLE [dbo].[viMediaPlaylist](
[MemberID] [bigint] NOT NULL,
[xmlPlaylist] [xml](CONTENT [dbo].[viMediaPlaylistCollectionSchema]) NOT NULL,
PRIMARY KEY CLUSTERED
(
[MemberID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON, FILLFACTOR = 90) ON [PRIMARY]
) ON [PRIMARY]
I tried the following:
#1)Create table schema at the subscriber manually, and change package to Keep object as is. Got the same error during snapshot.
#2Filtered replication to NOT include XML column. This worked, and no error was generated, replication was up and running.
So my question is, what is the problem with XML column being replicated?
Any ideas how i can make this work? At this point i'm not sure what the problem is with the xml column, but it seems like ti tries to run schema script, but i'm not asking it to create the schema i already did it myself. Thanks!
Here is a log dump from the distributor:
2007-09-11 16:40:14.56 SQL Command dump
2007-09-11 16:40:14.56 ================
2007-09-11 16:40:14.56 Server: SQL02
2007-09-11 16:40:14.56 Database: Video
2007-09-11 16:40:14.56 Command Text: sys.sp_releaseapplock
2007-09-11 16:40:14.56 Parameters:
2007-09-11 16:40:14.56 @Resource = SQL02-Video_viMediaPlaylis-71
2007-09-11 16:40:14.56 @LockOwner = Session
2007-09-11 16:40:14.56 @DbPrincipal = db_owner
2007-09-11 16:40:15.17 [0%] The replication agent had encountered an exception.
2007-09-11 16:40:15.17 Source: Unknown
2007-09-11 16:40:15.17 Exception Type: Microsoft.SqlServer.Management.Smo.FailedOperationException
2007-09-11 16:40:15.17 Exception Message: Script failed for Table 'dbo.viMediaPlaylist'.
2007-09-11 16:40:15.17 Message Code: Not Applicable
2007-09-11 16:40:15.17
2007-09-11 16:40:15.17 Call Stack:
2007-09-11 16:40:15.17 Microsoft.SqlServer.Management.Smo.FailedOperationException: Script failed for Table 'dbo.viMediaPlaylist'. ---> Microsoft.SqlServer.Management.Smo.UnsupportedVersionException: Either the object or one of its properties is not supported on the target server version.
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Management.Smo.UserDefinedDataType.GetTypeDefinitionScript(ScriptingOptions so, SqlSmoObject oObj, String sTypeNameProperty, Boolean bSquareBraketsForNative)
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Management.Smo.UserDefinedDataType.AppendScriptTypeDefinition(StringBuilder sb, ScriptingOptions so, SqlSmoObject oObj, SqlDataType sqlDataType)
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Management.Smo.Column.ScriptDdlCreateImpl(StringBuilder sb, ScriptingOptions so)
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Management.Smo.Column.ScriptDdl(StringCollection queries, ScriptingOptions so)
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Management.Smo.Table.ScriptTableInternal(ScriptingOptions so, StringBuilder sb, ColumnCollection columns, IndexCollection indexes)
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Management.Smo.Table.GetTableCreationScript(ScriptingOptions so, StringBuilder sb)
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Management.Smo.Table.ScriptCreate(StringCollection queries, ScriptingOptions so)
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Management.Smo.Scripter.ScriptWithListWorker(DependencyCollection depList, SqlSmoObject[] objects)
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Management.Smo.Scripter.ScriptWithList(DependencyCollection depList, SqlSmoObject[] objects)
2007-09-11 16:40:15.17 --- End of inner exception stack trace ---
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Management.Smo.Scripter.ScriptWithList(DependencyCollection depList, SqlSmoObject[] objects)
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Management.Smo.Scripter.ScriptWithList(SqlSmoObject[] objects)
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Replication.Snapshot.TransSmoScriptingManager.GenerateLogBasedArticleSchScript(Scripter scripter, BaseArticleWrapper articleWrapper, Table smoTable)
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Replication.Snapshot.TransSmoScriptingManager.GenerateLogBasedArticleScripts(ArticleScriptingBundle articleScriptingBundle)
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Replication.Snapshot.TransSmoScriptingManager.GenerateArticleScripts(ArticleScriptingBundle articleScriptingBundle)
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Replication.Snapshot.SmoScriptingManager.GenerateObjectScripts(ArticleScriptingBundle articleScriptingBundle)
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Replication.Snapshot.SmoScriptingManager.DoScripting()
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Replication.Snapshot.SqlServerSnapshotProvider.DoScripting()
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Replication.Snapshot.SqlServerSnapshotProvider.GenerateSnapshot()
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Replication.SnapshotGenerationAgent.InternalRun()
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Replication.AgentCore.Run()
Hello,
Maybe anyone have done that before?
I have table where i store SOURCE_TABLE_NAME and DESTINATION_TABLE_NAME, there is about 120+ tables.
i need make SSIS package which selects SOURCE_TABLE_NAME from source ole db, and loads it to DESTINATION_TABLE_NAME in destination ole db.
I made such SSIS package. set ole db source data access mode to table or view name variable.
set ole db destination data access mode to table or view name variable. set to variables defoult values (names of existing tables)
but when i loop table names is changed, it reports error, that can map columns, becouse in new tables is different columns.
how to solve that problem?
Hi... I was hoping if someone could share me some thoughts with the issue that I am having at the moment.
Problem: When I run the package in my local machine and update local SS DB/table - new records writes OK in the table. BUT when I changed my destination meaning write record into another physical SS DB/table there is no INSERT data occurs. AND SO when I move/copy over that same package into another server (e.g. server that do not write record earlier) and run it locally IT WORKS fine too.
What I am trying to do is very simple - Add new records in a SS table using SSIS . I only care for new rows and not even changed rows.
Here is my logic -
1. Create Ole DB source to RemoteSERVER - using SELECT stmt
2. I have LoopUp component that will look for NEW records - Directs all rows that don't find match and redirect rows (error output).
3. Since I don't care for any rows that is matched in my lookup - I do nothing or I trash the rows
4. I send the error rows (NEW rows) into OleDB destination
RESULTS when I run the package locally and destination table is also local - WORKS FINE;
But when I run the package locally and destination table is in another Sserver (remote) - now rows is written.
The package is run thru BIDS manually so there is no sucurity restrictions attached to it.
I am not sure what I am missing. And I do not see error in my package either. It is not failing.
Thanks in advance!