Continue Execution
Apr 15, 2008In my package i have to loop through files and load the data from files into a table.
but if a file has error i need to move it to a folder like errored and continue execution with other files.
ADVERTISEMENT
Insufficient Memory To Continue The Execution
Nov 24, 2007I have scheduled a SSIS package to run repeatedly by creating a scheduled SQL job that runs every minute . After every hour the packgae fails with the following error
Description: System.OutOfMemoryException: Insufficient memory to continue the execution of the program. at Microsoft.SqlServer.Dts.Pipeline.Wrapper.IDTSCustomProperty90.get_Value() at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.CreateUserComponent() End Erro
The strange thing is that if i right click on SQL JOb and run it...it works fine.
Did anyone encounter similar problem or know the solution of the above problem ?
Thanks....
How To Continue Package Execution During Error?
Jun 5, 2006We have a package that loads the data from several excel files into database in a forloop.
Everything works files until the package hits the bad file.
My goal is to continue the loop to process the rest of the files by skipping the bad file and error. In each task OnError I am creating custom error message to send an error/ sucess summary email out at end of the process.
How can force the for loop to continue when there is an error?
Is there any way to reset the errors?
Thanks
R
Insufficient Memory To Continue The Execution Of The Program
Feb 7, 2008Hi
I'm using VS'08, developing in VB.NET, using an SQL'05 DB and a local sync DB (3.5)
When attempting to append a record to the SQL CE DB's local sync'd table I get the error <<Insufficient memory to continue the execution of the program>>, the same record gets appended to the SQL'05 DB without error.
Ideas?
David L.
Continue Package Execution On Task Failure
Dec 2, 2006Hi,
I am developing an SSIS package and need the execution of the package to continue even if one of the tasks within the package fails. I have an OnError event handler for this task which fires when it fails but want the rest of the package to continue.
Any suggestions greatly appreciated.
Thanks
Insufficient Memory To Continue The Execution Of The Program. (mscorlib)
May 24, 2008Hi,
Received the error message below when we trying to execute an sql file which has insert statments and size of the file is 111mb. Environment - SQL Server 2005 - windows 2003.
Error Message - Insufficient Memory to continue the execution of the program. (mscorlib)
There is any resolution ?. Please advice.
Thanks
GuessMN
How Can I Stop Or Continue Package Execution Based On Variable Value
Aug 1, 2006Hi,
I need to make my package check a variable value at the begining of the execution and depending on the value of that variable it decides either to continue or stop the package execution. How can i do that?
thanks,
Aref
Static Variables In A SQLCLR Stored Proc Seem To Get Reused From Execution To Execution Of The Sp
Aug 23, 2007after moving off VS debugger and into management studio to exercise our SQLCLR sp, we notice that the 2nd execution gets an error suggesting that our static SqlCommand object is getting reused from the 1st execution (of the sp under mgt studio). If this is expected behavior, we have no problem limiting our statics to only completely reusable objects but would first like to know if this is expected? Is the fact that debugger doesnt show this behavior also expected?
View 4 Replies View RelatedWHILE..CONTINUE Problem
Aug 25, 2006Hi all,
I need a bit of assistance with a piece of code I have written. I keep receiving a Syntax error "Incorrect syntax near END". The procedure is ~1000 line of code so I have just cut and paste the "problem" sql here and attached the full code to this message to see if anyone can help me out. Cheers :beer:
-- BEGIN CODE
IF @NoOfChildren > 0
BEGIN
DECLARE @childNo AS INTEGER
DECLARE @SQL AS VARCHAR(8000)
SET @childNo = 1
WHILE @childNo != @NoOfChildren
BEGIN
-- Perform Dynamic SQL check for children
SET @SQL = 'IF @strChild'+ @childNo + 'Surname IS NOT NULL
BEGIN
SET @asciicounter = 1
SET @asciifound = 0
WHILE @asciicounter != 255
BEGIN
IF CHARINDEX(char(@asciicounter),@strChild'+ @childNo +'Surname) != 0
BEGIN
IF @asciicounter NOT IN (32,45,46)
BEGIN
SET @asciifound = 1
END
END
SET @asciicounter = @asciicounter + 1
CONTINUE
END
IF @asciifound = 1
BEGIN
SET @strErrorBucket = @strErrorBucket + ''''45'''',''
END
END'
EXECUTE @SQL
SET @SQL = ''
-- Perform Dynamic SQL check for Forename
SET @SQL = 'IF @strChild'+ @childNo + 'Forename IS NOT NULL
BEGIN
SET @asciicounter = 1
SET @asciifound = 0
WHILE @asciicounter != 255
BEGIN
IF CHARINDEX(char(@asciicounter),@strChild'+ @childNo +'Forename) != 0
BEGIN
IF @asciicounter NOT IN (32,45,46)
BEGIN
SET @asciifound = 1
END
END
SET @asciicounter = @asciicounter + 1
CONTINUE
END
IF @asciifound = 1
BEGIN
SET @strErrorBucket = @strErrorBucket + ''''46'''',''
END
END'
EXECUTE @SQL
SET @SQL = ''
-- Perform Dynamic SQL check on DOB
SET @SQL = 'IF @dtChild'+@childNo+'Dob IS NULL
BEGIN
SET @strErrorBucket = @strErrorBucket + ''''047'',''
END
IF ISDATE(@dtChild'+@childNo+'Dob) = 0
BEGIN
SET @strErrorBucket = @strErrorBucket + ''''048'',''
END
IF DATEDIFF(YEAR, @dtChild'+@childNo+'Dob, GETDATE()) NOT BETWEEN 0 AND 18
BEGIN
IF DATEDIFF(YEAR, @dtChild'+@childNo+'Dob, GETDATE()) > 18
BEGIN
SET @strErrorBucket = @strErrorBucket + ''''049'',''
END
ELSE
BEGIN
SET @strErrorBucket = @strErrorBucket + ''''050'',''
END'
EXECUTE @SQL
SET @SQL = ''
-- Perform dynamic SQL check on Gender
SET @SQL = 'IF @blnChild'+@childNo+'Gender IS NULL
BEGIN
SET @strErrorBucket = @strErrorBucket + ''''051'',''
END'
EXECUTE @SQL
SET @childNo = @childNo + 1
CONTINUE
END
-- END CODE
How To Continue On Error
Jul 23, 2005How can I cause my insert statement to skip over (without failing) rowswhere there's a primary key constraint violation?I've got a case where daily I insert >500k rows of daily data, wherethe data is date and time stamped. So, for example, I have an insertstatement with constraint: WHERE date >= '5/20/05' AND date <'5/21/05'. That takes care of one day's data (5/20).However, the next day's data (5/21) will still have some time stampsfrom the previous day. Therefore the statement needs to be somethinglike WHERE date >= '5/20/05' AND date <= '5/21/05'. The 5/20 data isalready loaded but I need to take the 5/21 data which just happens tocontain just a few rows of data marked 5/20 and insert it withoutgenerating a primary key error from all the other 5/20 rows that arealready inserted.-Dave
View 7 Replies View RelatedCONTINUE In A Cursor
Nov 29, 2007Will using continue cause an infinite loop in a cursor or will the cursor know to go to the next record?
Begin Tran
exec @rtn = spDoSomething
select @err = @@error
If @err <> 0
Begin
rollback
continue
End
Commit Tran
Continue After Error
Aug 27, 2007I have an SSIS package that uses a for each loop to send an order confirmation e-mail. If it does not find an email I need the package to continue after the failure path. The package stops after the failure, but I need it to continue with the next iteration of the for each loop. How can I do this?
View 4 Replies View RelatedInsufficient Memory To Continue
Nov 27, 2001I am running a .sql file containing a large number of delete and insert statements, using isql from the command line. After 2 minutes I get a message "Insufficient memory to continue", same statements if I cut and paste in SQL server query analyzer I do not get this message. On looking at the
task manager, it shows a lot of available memory.
Any clues
Thanks in advance
Continue On If Certain Error Message
Jan 14, 2002I have a sql statement which runs through a reference table to drop columns no longer needed. It works, however if it tries to delete a column that does not exist, it errors out. Is there a way to continue if this error appears(I have the set error routine set up) The question is can I tell it if it is this error to go on, and is "continue" the
right syntax? Below is statement
open dbcursor
fetch next from dbcursor into @tbname,@fldname,@recid
while (@@FETCH_STATUS <> -1)
begin
--set @tbname = 'IMMUNIZATION_MAST_'
--set @fldname = 'cb_other'
set @sql = 'alter table ' + ltrim(@tbname)
set @sql3= ' drop column ' + ltrim(@fldname)
exec(@sql + @sql3)
select @error = @@error
if @error = 5924
begin
CONTINUE?
end
print @error
Error In Replication How To Continue
Jan 28, 2004I have transactional Replication from A to B.
My distribution agent failed becos of a primary key violation error in a table.[i have not included the skip error option].
Then the replication stopped.
The transactions on other tables are also not replicated to B.
IF an error is encountered in one of the tables will the replication stop entirely??.Is there no way for the replication to continue for the rest of the tables..
Pls clarify
Continue Option In For Loop
Jun 1, 2007I have a for loop I have several tasks inside. I would like to "continue" with a new iteration if any of the tasks in the loop error or fail. Is this possible and if so -- how?
View 5 Replies View RelatedContinue On INSERT Error.
May 10, 2007Hi!
Imagine this SQL statement:
Code SnippetINSERT INTO B SELECT * FROM A
If one of the insert fails ... don't continue, the statement fail. For example if any field in A violate a constraint in B, the statement fails.
I want that the statement continue if errors occurs, if i lost a number of rows don't matter ... but if i can save or log this row will be great too !!
Is posible? Any way to do it?
Regards.
Unable To Load Bcp Resource DLL. BCP Cannot Continue
Nov 30, 2006I get the message when loading the bcp. I check the path variable and the sqlserver BINN directory is there, but twice. If I try opening the command window and write bcp, I get the error, if I enter the whole path c:...80 oolinncp there is no problem. I wonder what could it be?
I've manually reinstalled many times but still having trouble.
Thanx in advance
SQL SERVER 2000 or SQL SERVER 7 (I've tried with both)
WINDOWS XP
Continue The Query If An Error Occured
Jan 12, 2004I have a looped query querying linked servers. When it cannot connect to a server, it errors out.
Error Message;
Server: Msg 6, Level 16, State 1, Line 2
Specified SQL server not found.
How can I handle this error message and continue the query?
Stop Growth In .mdf And Continue On .ndf File?
Jan 4, 2008
I have 50GB datafile (.mdf) and have 650 mb lift on the hard drive. I have another drive (on the same box) which has about 30 GB left.
My question is can i create a .ndf file in that 30GB drive and continue the database growth on the new .ndf file with out any furthur growth on the .mdf file? please help!
Thanks in advance!
THE LADDERS (The Most $100k+ Jobs.)
www.TheLadders.com
Log Errors, But Continue Processing Data
Jun 26, 2007Do you have to set the Error Output on DF components to "Fail Component" in order to get the errors?
What I would LIKE to do is a combination of "Ignore Failure" and "Fail Component". You see, I am using the Logging feature in my package that creates the sysdtslog90 table in the SQL database. The errors that I am logging make sense and have enough information for my purposes.
The problem is that I would like to continue processing the data and not have it stop when a data error occurs. I REALLY do not want to Redirect Rows unless it is necessary for me to do what I am asking.
Using Ignore Failure on both the source text file and destination SQL table allows the "good" data to be inserted, but I cannot get any info on the columns in error. Conversely, if I choose to Fail component, I get the info on the columns in error, but only the data that was inserted before the error was encountered is inserted into the table.
Suggestions?
FOREACH Loop Container: Continue ?
May 26, 2006With a ForEach container, configured to loop through files in a
directory, if I have a problem with a file.. can I direct the loop to
skip on to the next file?
I'm processing structured files, first record of each is some
header info, body records are in the middle, and then the last record
is a trailer containg a checksum
So, for each file in the directory, I split the records into three raw
files, one for header rec(s) , one for body recs and one for trailer
recs. (based on line numbers and using a conditional split to direct
the records)
Then I start by processing the header recs in a dataflow.. if all goes
well there I move on to the next dataflow to process the body recs from
the DataRecs raw file.. etc...
I would like to do some validation at each processing step.. if a
header rec fails validation say... then I'd like to just stop
processing that file and move onto the next file...
Now, I don't see my validation throwing an exception... so its more
that I'd decide (maybe using an Audit ) that the header doesn't pass
validation.. then I'd like to put a record in an error table (with info
about filename, source etc, not just content of the current data row)
But not sure what approach to take on this...
If there is an appropriate section in BOL please point me at it...
Thanks
PJ
Continue Transaction If Trigger Fails
Nov 6, 2007Hi guys,
I have some triggers that insert data in a table located in a remote server. If the remote server happens to be down I want to continue with the original transaction anyway. Can I use a BENGIN TRY BEGIN CATCH block to continue with the transaction in the trigger and also insert the data into a temporal local table if the remote insert fails?
Regards
Log Errors But Continue To Load Data?
May 4, 2006Hello,
In my SSIS package I am trying to import a .csv flat file with about 170,000 rows of data with 75 columns (I know this is rather large). I would like to create a SSIS package that loads ALL of the rows of data into a table. This table has it's fields defined (such as money, float, varchar, datetime, etc). I want the data to load to this table even if there is a conversion error converting any field. When the data is loaded to this table, any fields that couldn't be converted should be set to null. Of the 75 columns of data, there are MANY columns that could be invalid.
For example, if the flat file contains the value "00/00/00" for my "PaidDate" field, I would want all of the other fields to be populated and the value for this particular record's "PaidDate" field to be null.
It would also be nice if I could trap any of the fields that caused a problem and log them along with the row.
I know that SSIS supports the "Redirect Row" method for handling data, but in my case, I don't want to redirect it. I want to continue to load it, just with a null value.
Is there an easy way of doing this (i.e. perhaps by using the Advanced Editor for the Flat File Source and setting something in the Input/Output columns)? I really don't want to create a Derived Column or Data Conversion transformation for every field that needs to be converted (b/c there are 75 columns to maintain this for).
I know if I import this file to an Access 2003 database, it imports the data fine and logs any conversion errors to an "_ConversionErrors" table. I am basically looking for this same behavior in SSIS, without having to maintain 75 columns.
TIA
Continue ForEach After An Error Was Handled
Mar 13, 2008How can we continue with the rest of the iterations in ForEach Loop after handle an error.
I Have a dataflow task inside a for-each loop and processing a set of flat files in that. When error occurs in the dataflow task, i moved that particular flat file to another location. But, If an error occurs at first falt file, It moves that flat file to the location i specified and not continue with the next file (The Execution finished at that stage itself afetr the first flat file).
I Set the FailParentonFailue of Dataflow task to TRUE (Since its inside the for loop).
Any thing i have to change ? Or Where i miss the thing.
Continue Statement After Insert Fails
Oct 16, 2007
Hi,
How can avoid SQL to rollback the transaction after an insert fails?. I would like to keep the sucessfully inserted rows and continue with next ones after a single one has failed, and then report the ones that failed.
NOT ATOMIC CONTINUE ON SQLEXCEPTION??
Sorry for such a lame question
Regards,
Execution Plans &<&> Proportionate Execution Times
Dec 7, 2005Hi I am slowly getting to grips with SQL Server. As a part of this, I have been attempting to work on producing more efficient queries. This post is regarding what appears to be a discrepancy between the SQL Server execution plan and the actual time taken by a query to run. My brief is to produce an attendance system for an education establishment (I presume you know I'm not an A-Level student completing a project :p ). Circa 1.5m rows per annum, testing with ~3m rows currently. College_Year could strictly be inferred from the AttDateTime however it is included as a field because it a part of just about every PK this table is ever likely to be linked to. Indexes are not fully optimised yet. Table:CREATE TABLE [dbo].[AttendanceDets] ([College_Year] [smallint] NOT NULL ,[Group_Code] [char] (12) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,[Student_ID] [char] (8) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,[Session_Date] [datetime] NOT NULL ,[Start_Time] [datetime] NOT NULL ,[Att_Code] [char] (1) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ) ON [PRIMARY]GO CREATE CLUSTERED INDEX [IX_AltPK_Clust_AttendanceDets] ON [dbo].[AttendanceDets]([College_Year], [Group_Code], [Student_ID], [Session_Date], [Att_Code]) ON [PRIMARY]GO CREATE INDEX [All] ON [dbo].[AttendanceDets]([College_Year], [Group_Code], [Student_ID], [Session_Date], [Start_Time], [Att_Code]) ON [PRIMARY]GO CREATE INDEX [IX_AttendanceDets] ON [dbo].[AttendanceDets]([Att_Code]) ON [PRIMARY]GOALL inserts are via an overnight sproc - data comes from a third party system. Group_Code is 12 chars (no more no less), student_ID 8 chars (no more no less). I have created a simple sproc. I am using this as a benchmark against which I am testing my options. I appreciate that this sproc is an inefficient jack of all trades - it has been designed as such so I can compare its performance to more specific sprocs and possibly some dynamic SQL. Sproc:CREATE PROCEDURE [dbo].[CAMsp_Att] @College_Year AS SmallInt,@Student_ID AS VarChar(8) = '________', @Group_Code AS VarChar(12) = '____________', @Start_Date AS DateTime = '1950/01/01', @End_Date as DateTime = '2020/01/01', @Att_Code AS VarChar(1) = '_' AS IF @Start_Date = '1950/01/01'SET @Start_Date = CAST(CAST(@College_Year AS Char(4)) + '/08/31' AS DateTime) IF @End_Date = '2020/01/01'SET @End_Date = CAST(CAST(@College_Year +1 AS Char(4)) + '/07/31' AS DateTime) SELECT College_Year, Group_Code, Student_ID, Session_Date, Start_Time, Att_Code FROM dbo.AttendanceDets WHERE College_Year = @College_YearAND Group_Code LIKE @Group_CodeAND Student_ID LIKE @Student_IDAND Session_Date <= @End_DateAND Session_Date >=@Start_DateAND Att_Code LIKE @Att_CodeGOMy confusion lies with running the below script with Show Execution Plan:--SET SHOWPLAN_TEXT ON--Go DECLARE @Time as DateTime Set @Time = GetDate() select College_Year, group_code, Student_ID, Session_Date, Start_Time, Att_Code from attendanceDetswhere College_Year = 2005 AND group_code LIKE '____________' AND Student_ID LIKE '________'AND Session_Date <= '2005-11-16' AND Session_Date >= '2005-11-16' AND Att_Code LIKE '_' Print 'First query took: ' + CAST(DATEDIFF(ms, @Time, GETDATE()) AS VarCHar(5)) + ' milli-Seconds' Set @Time = GetDate() EXEC CAMsp_Att @College_Year = 2005, @Start_Date = '2005-11-16', @End_Date = '2005-11-16' Print 'Second query took: ' + CAST(DATEDIFF(ms, @Time, GETDATE()) AS VarCHar(5)) + ' milli-Seconds'GO --SET SHOWPLAN_TEXT OFF--GOThe execution plan for the first query appears miles more costly than the sproc yet it is effectively the same query with no parameters. However, my understanding is the cached plan substitutes literals for parameters anyway. In any case - the first query cost is listed as 99.52% of the batch, the sproc 0.48% (comparing the IO, cpu costs etc support this). BUT the text output is:(10639 row(s) affected) First query took: 596 milli-Seconds (10639 row(s) affected) Second query took: 2856 milli-SecondsI appreciate that logical and physical performance are not one and the same but can why is there such a huge discrepancy between the two? They are tested on a dedicated test server, and repeated running and switching the order of the queries elicits the same results. Sample data can be provided if requested but I assumed it would not shed much light. BTW - I know that additional indexes can bring the plans and execution time closer together - my question is more about the concept. If you've made it this far - many thanks.If you can enlighten me - infinite thanks.
View 10 Replies View RelatedExecution Procedure Stored During Execution Of The Report .
Aug 3, 2007
Hello :
How to execute a procedure stored during execution of the report, that is before the poster the data.
Thnak you.
SQL Server Memory Usage Continue To Increase
Dec 28, 2004Hi,
On the last Sunday 26/12/04 on 20:00 I got on one of our applications in the customer site this error:
"There is insufficient system memory to run this query."
Details:
Computer: IBM XSERIES_345, dual CPU 2.8 Intel xeo, 1,047,952 KB ram, windows 2000 server sp4.
Disk space: 4395 MB, Virtual memory: initial size 1536 MB, Max size 3072 MB. Registry size: current 14 MB, Max 90 MB.
SQL Server 2000 SP 3, two production databases (1) Data size 100 MB, log size 15 MB (2) Data size 500 MB, log size 125 MB
All the memory options are configured as default i.e. dynamically configure for memory and not changes in any sp_configure options.
SQL server is the only major application running on the machine.
Facts:
On that evening the I've checked the Task Manager and found that SQL Server use 500 MB in Mem Usage and 1200 MB in VM size.
In the query analyzer I execute the select query which results the "…insufficient system memory…" error on both databases and on the one with more data it failed with this error, but on the other database it completed successfully.
I restart SQL Server service to solve it, and as for today 28/12/04 at 08:00 it use 590 MB in Mem Usage and 590 MB in VM size.
I have checked the system with Performance monitor and didn't find any problems I use the Memory: Pages/sec, Memory: Available Bytes, Physical Disk: % Disk Time, Processor: % Processor Time, SQL Server Buffer: Buffer Cache Hit Ratio.
We have 8 user connections for one of the database and 16 for the other one.
Our system runs with this configuration for 2 months, I backup the databases FULL, DIFF and LOG backup.
It's not real time system, and the load on the SQL is medium, but we use bad queries as update for all fields in one query (please don't ask…)
I know that SQL server is greedy with the memory and released memory only if other process needs it.
Any ideas why it happens?
Thanks,
Yaniv
How Is Performance If Continue Call Native Compiler SP
Jun 12, 2014I've tested a simple insert statement using Native Compiler SP. It's was working fast if compare to normal SP. when i continuous to call the same Native Compiler SP few times. The performance is exactly same as the normal SP.
View 6 Replies View RelatedHow To Use A Script To Break Or Continue A For Each Loop Task?
Jun 14, 2006Okay, I have a For each loop container that has an enumeration of folder locations. I run a script to filter the files in those folders and prepare them to the next task to be copy. I want the script to "continue" the loop if none of the files meet the criteria. Can someone point me into the right direction? I need some way to advance through the loop when this happens.
Thanks!
Flat File Source - Continue On Error?
Oct 20, 2007Hi
I have a CSV file which sometimes contains the odd CSV error, for this reason the odd row throws an error.
If I have a clean CSV file my SSIS package works great, but I am having problems getting the package to continue past the rows in the file that throw errors.
How do I :
Get the package to continue on error, I have tried playing with the Propagate Variable with no joy
Add an Error event, which will capture the error and log it to a SQL table or File Destination?
Any help will be great!
Thank you
Could Not Continue Scan With NOLOCK Due To Data Movement
Aug 24, 2007Hi all,
I'm getting this error on expanding the Databases node in SQL Server Management Studio Express Object Explorer:
Failed to retrieve data for this request. (Microsoft.SqlServer.Express.SmoEnum)
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.Express.ConnectionInfo)
Could not continue scan with NOLOCK due to data movement. (Microsoft SQL Server, Error: 601)
A similar error message also appeared when I tried opening an existing data connection within Database Explorer in Visual Web Developer Express. (However, the web application ran fine and it managed to access the database normally.)
These errors only appeared recently. Any ideas how to go about solving this issue?
Thanks in advance.