I have set up merge replication and it works nicely.
I have set it up to work continuously, because I thought that if it can't find the subscriber or is offline then that's fine it will just sync again when it's back on line.
This is true
BUT it keeps throwing lots of messages into the event log to tell me the merge has failed.
SO
a. Can i just turn off the error reporting
or
b. How can I get it to sync this way automatically on connection without the error messages
I am fairly new to SQL 2005 and have taken over a migration project from 2000 to 2005 and one of our scheduled jobs seem to run forever, but do not have errors. This did not happen in the past so I was wondering if the agent settings for Replication Merge has the -Continuous parameter will the job ever complete or does it really run "continuously"?
I was wondering if anybody knows how to solve this problem. Here's the setup.
There is an ASP.NET application running on a local web server at the customer's location, it currently uses a MSDE backend database. There is a copy of the application on the customer's webhosting company so it can be accessed from outside the customer's location it is running on a full version of SQL Server 2000. We have this setup because the customer's ISP is not very reliable and the customer needs to be able to use the application even when their web connection is down. It is also used from outside their location by sales people and management and remote offices. The problem is we want to keep both databases synchronized together. We had been using Merge Replication which was working fine until the local ID jumped because it had run out of allocated identities. This causes a problem for their accounting because now there is a gap in the document's numbers.
Is there a way to have the identity field (or a generated document number) to remain continuous and unique across both databases? This needs to also work if one of the databases were to go down for a time or lose connectivity between the two servers. I'm looking for any option. We also have the option of upgrading the application to SQL Server 2005 if needed. Any ideas are appreciated.
I know that adding a column using ALTER TABLE to add a column automatically allows SQLSERVER 2005 to replicate the schema changes to the subscribers, however, I would like to add a new column to an existing article that is being used for merge replication, however, I don't want this column to be replicated. Re-initialising the subscriptions is not a option. Help would be appreciated.
I am working on bringing our disaster recovery site to be a live site. Currently we replicate to one of out servers (server B) with merge replication (from server A). Server A also does one way transactional replication form some table to several other servers including servers at the DR site.
This setup is not going to be fast enough for what we need so I am wondering if a table is receiving merge replication will the merge updates also replicate down the transaction path??
Example... Server B update a row and merges to Server A. With this update them replicate (via transactional) to Server C??
Hi everbody, I setup the Merge Replication , it is working perfectly. But i have one problem now it is updating both ways. I nedd one way. Any body tell me which parameter i have to change.
My production box is running on NT4.0,SP6, SQL Server7.0,SP2. We implemented Merge replication. Working fine last 7 months. Last weekend i disabled replication, Successfully removed Distributor and Publishor. After that try add new fileds but won't allowed me. It's give the error message. I Also found Some Conflict_tables found almost 20 tables. All system Tables. Can delete these these tables, if i delete any problem my database. I added filelds many times but this time i got errors.
I have just installed replication on our production server to Merge Replicate with a Laptop server that will travel from time to time. I have now noticed that we cannot add or change any fields or attributes on the tables which are being replicated (which are all tables in the DB). This is a problem because we are changing and adding columns all of the time. Is there a way around this issue like shutting down the replication service or something? I have been unsuccessful in finding a way around this other than removing replication while we make changes.
I have implemented a Merger replication on our development server and I get a fillowing error when I try to update one of the table in publisher. "Transaction cannot start while in firehose mode"
Hi, I read some where that replication has two types conflict resolution, 1. row based and 2. Column based... If I am right... Can any one point me how to find out this option and how to set it up....
I have a merge replication going between 4 servers. The problem is when ever I do some BCP transfer to one of the tables in one of the servers. It puts the data in that table. But that Data does not get replicated to any other server like it should.
Please Advice on what to do. Is there any option I am forgetting to set or something.
I have successfully tried merge replication on single server with 2 databases. now i want to do the same with different servers, when i create pull subcription on server 2 which user account should I use? it is giving log in failure i tried using windows admin account and also the 'sa' account.
I have posted this earlier and I am re-posting it simplifying what I had said.
The scenario is:
I have two sql server database instances with the same database schema and all. However, both of them have different data. I have not set them for replication at all. Now, I want to do merge replication between them such that the data between them could be syncronized.
When I do pull merge subscription I have two choices - 1.Bringing schema and data to subscriber from publisher
2.Not bringing the schema and data from publisher to subscriber.
Obviously, I chose the second choice. But upon syncronizing I dont see any data from publisher coming to subscriber and vice-versa. If I add new data to publisher and do syncronization, I can see ONLY the new data created after the replication setup in subscriber. If I add new data to subscriber and do syncronization then the new data is removed from subscriber and not propagated to publisher.
I have just set up Merge replication, I have two servers, server A and server B, the merge replication worked successfully but I don't quite sure which databases should or should not replicated? If not, what other methods should I use?
I would really appreciated any comments or advice out there!
I had set up merge replication. I got these error messages where replications starts "Column names in each table must be unique. Column name 'PubID' in table 'bonflict_DBName_PHP_Data_Publications' is specified more than once "
PHP_Data_Publications table defind as:
CREATE TABLE [dbo].[PHP_Data_Publications] ( [PHP_Pub_ID] [uniqueidentifier] NOT NULL , [PHP_Data_ID] [uniqueidentifier] NOT NULL , [PubID] [uniqueidentifier] NOT NULL , [UserID] [uniqueidentifier] NOT NULL , [Username] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL , [Publication] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL , [Pub_Year] [datetime] NULL , [Pub_Name] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL , [rowguid] uniqueidentifier ROWGUIDCOL NOT NULL ) ON [PRIMARY] GO
ALTER TABLE [dbo].[PHP_Data_Publications] WITH NOCHECK ADD CONSTRAINT [DF__PHP_Data___rowgu__01E91FA0] DEFAULT (newid()) FOR [rowguid] GO
CREATE UNIQUE INDEX [index_1466488303] ON [dbo].[PHP_Data_Publications]([rowguid]) ON [PRIMARY] GO
Is it possible to modify or add new fields in sql 2000 when the instance became publisher ? I tried it several times but it failed. I access microsoft website but i did not help.
SQL Server BOL says merge replication can be done in only one direction. But my understanding is Merge replication happens in both ways between publisher and subscriber.
How can i allow data movement from only wince sql ce subscribers and not from publisher running sql 2000 and win 2k.
Please reply immediately bcoz i require a solution which has to be implemented very soon.
hi, in merge replication,i make a request subscriber with a priority 25.00,when i update the same date,it always choose the update from the publishing server,why????how does it work??? thx inadvance
I am using merge replication at remote connected via ISDN Dialup line. I got following error and replication fail.
publisher - PRSTGINDSQLIND agent - PRSTGINDSQLIND-pml-pml-192.168.100.50SQLDWS-4 publication - pml subsctription - 192.168.100.50SQLDWS:pml error - The process could not deliver the snapshot to the Subscriber. Agent Merge replication provider -2147201001 Agent 192.168.100.50sqldws 20037 ODBC 192.168.100.50sqldws
Agent - PRSTGINDSQLIND-pmst-pmst-192.168.100.50SQLDWS-3 error - The subscription to publication 'pmst' is invalid. last command {call sp_MSgetreplicainfo(?,?,?,?,?,?,?)}
I am in a process of learning Replication in MSDE, especially Merge Replication
Server runs on MS-XP Professional -------------------------------------- I have a sample Access project 'ReplTest' which has only table with only 2 columns. DatabaseName:ReplTestDB Table Name :TestTable MSDE Instance Name:SVRMYINSTANCE
Now I would like to know how I can configure this database for merge replication using SQL-DMO
Laptop runs on MS-XP Professional -------------------------------------- I have another access project which is running on computer 2 and connected to the ReplicaTest database.
MSDE Instance Name:LPTMYINSTANCE
My task is, when I am disconnected from server I would like to have a local copy of the database to work with and then, when reconnected, need synchronization with the server database and continue working from server database.
How to write this replication process from scratch using SQL-DMO objects in both Server computer and Laptop computer.
I dont have enterprise manager in both computers since they use only MSDE
Hi, I have a problem when doing merge replication. I need to have a identity column on both the publisher and subscriber, eg id. When the publisher is down, my app will now reference to the subscriber and insert into the subscriber. However when the publisher is up, the app will reference to publisher and start to insert into the publisher. This will cause conflict in the id. Also, i need the id to be in running order, therefore i cant use range for publisher and subscriber. Anyone have idea how to solve this problem?
I am having a problem getting my merge replication to work out. I am wanting to make it where the merge happens on demand. I have tried to run replmerg through cmd prompt and I get the error 'The subscription to publication [namehere] has expired or does not exist.' I have had no problems running the merge agent within Enterprise Manager. I have thought of running windows sync manager but I do not want my people to have to type a password in everytime they need to sync. I am running the whole replication process through FTP. I am in desperate need of help. Anything would be great!
I have merge replication setup between 2 servers and the subscriber had been offline for about 24 hours due to a network outage. What would be the best and easiest way to resynch the data. Would my best bet be a reinitialization or should I start a new snapshop and reapply. Also can I start a snapshot while users are using the publishing database?
I've tried to configure merge replication between SQL2005 and SQL Express use Web synchronize but the status of subcription is always uninitialized although I reinitialized it. Could you tell me the way to start it ? Thank so much.
Hi I am looking at SQL Replication and merge replication seems like the solution as I have 30 Remote offices who will all add data to their data bases and sync that data back to a central office. The central office will then use the "whole" data for reporting etc.
I am trying to figure out if I need static or dynamic filtering. I only want to filter horizontally on values found in a column called 'office' This value will be an integer that represents the different remote offices. But after reading through documentation I am still unclear as to whether I can do this with static filters. Any help/advice appreciated.
I have a sql 2005 application where sql express clients perform merge replication. Work great except where I have a poor internet connection that has latency in the 500-1000ms range. I have been told by someone looking at ethereal capture that i have an inordinate amount of TCP ACK's, DUP's and retransmission attempts. The question is, is there a timout parameter that could be increased to wait a bit longer?
I have a database which i have replicated using merge replication,how can i enable only the publisher to replicate(download) the data to the subscribers and block any data changes that occur at the subscriber from replcating back to the publisher?
