Conversion Error
May 3, 2006
Please help.
I have an aspx page with a drop down list(ddlCategories), and a datalist(dlLinks). The drop down lists data property is a uniqueidentifier from a table.
When an item in the list is selected it fires the following:
SqlLinks.SelectParameters("CategoryID").DefaultValue = ddlCategories.SelectedValue
dlLinks.DataBind()
The sqldatasource for the datalist runs a stored procedure (below)
sp_GetLinks (@CategoryID ?) AS
select * from links where category = @category
My question is, what should @Category be declared as if the category column in the table is a uniqueidentifier? And what conversion do I need to do I just can't work it out, as I keep getting the following error:
Implicit conversion from data type sql_variant to uniqueidentifier is not
allowed. Use the CONVERT function to run this query. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code.
Exception Details:
System.Data.SqlClient.SqlException: Implicit conversion from data type
sql_variant to uniqueidentifier is not allowed. Use the CONVERT function to run
this query.
Source Error:
Line 5: Protected Sub DropDownList1_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles ddlCategories.SelectedIndexChanged
Line 6: SqlLinks.SelectParameters("CategoryID").DefaultValue = ddlCategories.SelectedValue
Line 7: dlLinks.DataBind()
Line 8: End Sub
Line 9: End Class
Source File:
C:Documents and SettingsKarl WallsMy DocumentsMy
WebsAFRAlinks.aspx.vb Line: 7
Stack Trace:
[SqlException (0x80131904): Implicit conversion from data type sql_variant to uniqueidentifier is not allowed. Use the CONVERT function to run this query.]
System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) +177
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +68
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +199
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +2305
System.Data.SqlClient.SqlDataReader.ConsumeMetaData() +31
System.Data.SqlClient.SqlDataReader.get_MetaData() +62
System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) +294
System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) +1021
System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) +314
System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method) +20
System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method) +107
System.Data.SqlClient.SqlCommand.ExecuteDbDataReader(CommandBehavior behavior) +10
System.Data.Common.DbCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior) +7
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +139
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +139
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +83
System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1659
System.Web.UI.WebControls.BaseDataList.GetData() +53
System.Web.UI.WebControls.DataList.CreateControlHierarchy(Boolean useDataSource) +267
System.Web.UI.WebControls.BaseDataList.OnDataBinding(EventArgs e) +56
System.Web.UI.WebControls.BaseDataList.DataBind() +62
links.DropDownList1_SelectedIndexChanged(Object sender, EventArgs e) in C:Documents and SettingsKarl WallsMy DocumentsMy WebsAFRAlinks.aspx.vb:7
System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +75
System.Web.UI.WebControls.DropDownList.RaisePostDataChangedEvent() +124
System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +7
System.Web.UI.Page.RaiseChangedEvents() +138
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4507
View 2 Replies
ADVERTISEMENT
May 14, 2008
i have a weird situation here, i tried to load a unicode file with a flat file source component, one of file lines has data like any other line but also contains the character "ÿ" which i can't see or find it and replace it with empty string, the source component parses the line correctly but if there is a data type error in this line, the error output for that line gives me this character "ÿ" instead of the original line.
simply, the error output of flat file source component fail to get the original line when the line contains hidden "ÿ".
i hope you can help me with issue.
Thanks in advance.
View 5 Replies
View Related
Jan 17, 2007
here is my code the falue of pr_h_reqby is "Test"
Dim strconn As New SqlConnection(connstring)
Dim myReqdata As New DataSet
Dim mycommand As SqlDataAdapter
Dim sqlstr As String = "select pr_H_reqby from tbl_pr_header where pr_h_recid = " & recid & ""
mycommand = New SqlDataAdapter(sqlstr, strconn)
mycommand.Fill(myReqdata, "mydata")
If myReqdata.Tables(0).Rows.Count > 0 Then
'lblReqID.Text = myReqdata.Tables(0).Rows("reqid").ToString
lblNameVal.Text = myReqdata.Tables("mydata").Rows("pr_H_reqby").ToString()
lblEmailVal.Text = myReqdata.Tables("mydata").Rows("pr_h_reqemail").ToString()
lblReqDateVal.Text = myReqdata.Tables("mydata").Rows("pr_h_reqdate").ToString()
lblneedval.Text = myReqdata.Tables("mydata").Rows("pr_h_needdt").ToString()
lblDeptval.Text = myReqdata.Tables("mydata").Rows("pr_h_dept").ToString()
txtbxReqDesc.Text = myReqdata.Tables("mydata").Rows("pr_h_projdesc").ToString()
End If
View 1 Replies
View Related
Nov 6, 2007
Hi,I keep getting the error:System.Data.SqlClient.SqlException: Conversion failed when converting the varchar value '@qty' to data type int. When I initiate the insert and update.I tried adding a: Convert.ToInt32(TextBox1.Text), but it didn't work.. I also tried fiddling with the update code, but I think it is to do with the insert bool as the update works at the moment.. Could someone help?My code:private bool ExecuteUpdate(int quantity){ SqlConnection con = new SqlConnection();
con.ConnectionString = "Data
Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\ASPNETDB.MDF;Integrated
Security=True;User Instance=True"; con.Open(); SqlCommand command = new SqlCommand(); command.Connection = con; TextBox TextBox1 = (TextBox)FormView1.FindControl("TextBox1"); Label labname = (Label)FormView1.FindControl("Label3"); Label labid = (Label)FormView1.FindControl("Label13"); command.CommandText = "UPDATE Items SET Quantityavailable = Quantityavailable - '@qty' WHERE productID=@productID"; command.Parameters.Add("@qty", TextBox1.Text); command.Parameters.Add("@productID", labid.Text); command.ExecuteNonQuery(); con.Close(); return true;} private bool ExecuteInsert(String quantity) { SqlConnection con = new SqlConnection();
con.ConnectionString = "Data
Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\ASPNETDB.MDF;Integrated
Security=True;User Instance=True"; con.Open(); SqlCommand command = new SqlCommand(); command.Connection = con; TextBox TextBox1 = (TextBox)FormView1.FindControl("TextBox1"); Label labname = (Label)FormView1.FindControl("Label3"); Label labid = (Label)FormView1.FindControl("Label13");
command.CommandText = "INSERT INTO Transactions
(Usersname,Itemid,itemname,Date,Qty) VALUES
(@User,@productID,@Itemsname,@date,@qty)"; command.Parameters.Add("@User", System.Web.HttpContext.Current.User.Identity.Name); command.Parameters.Add("@Itemsname", labname.Text); command.Parameters.Add("@productID", labid.Text); command.Parameters.Add("@qty", Convert.ToInt32(TextBox1.Text)); command.Parameters.Add("@date", DateTime.Now.ToString()); command.ExecuteNonQuery(); con.Close(); return true; }protected void Button2_Click(object sender, EventArgs e){ TextBox TextBox1 = FormView1.FindControl("TextBox1") as TextBox; ExecuteUpdate(Int32.Parse(TextBox1.Text) );}protected void Button2_Command(object sender, CommandEventArgs e) { if (e.CommandName == "Update") { TextBox TextBox1 = FormView1.FindControl("TextBox1") as TextBox; ExecuteInsert(TextBox1.Text); } } Thanks so much if someone can!Jon
View 3 Replies
View Related
Aug 23, 2004
This is the error message I get: :(
Server: Msg 242, Level 16, State 3, Line 1
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
This is the query:
Select Qual_ins.CompanyCode, Qual_ins.ParticipantCode, Qual_ins.Ins_Code, Qual_ins.Plan_Code,
dbo.PremiumRate(Qual_Ins.Crit,Qual_Ins.PQB_Spec,Pl an_Mas.Extend_Fee,
Qual_Ins.Adjpremium,Qual_Ins.Adjpremiumper,Qual_In s.Adjpremend,
GetDate(),Qual_Ins.Cover_Amt, Plan_Mas.CR_A, Plan_Mas.CR_B,
Plan_Mas.CR_C, Plan_Mas.CR_D, Plan_Mas.CR_E, Plan_Mas.CR_F,
Plan_Mas.CR_G, Plan_Mas.CR_H, Plan_Mas.CR_I, Plan_Mas.CR_J,
Plan_Mas.CR_K, Plan_Mas.CR_L, Plan_Mas.CR_M, Plan_Mas.CR_N,
Plan_Mas.CR_O) AS PremiumRate
FROM Qual_ins, Plan_Mas
WHERE Qual_Ins.CompanyCode = 'ACME'
AND Qual_ins.ParticipantCode = 4
AND Plan_Mas.CompanyCode = Qual_ins.CompanyCode
AND Plan_Mas.Ins_Code = Qual_ins.Ins_Code
AND Plan_Mas.Plan_Code = Qual_ins.Plan_Code
Order BY Qual_ins.Ins_Code
Please let me know if you need to see my PremiumRate (User Defined Function) in order to help me elimate this error message.
Any help is appreciate!
I'm new to this.... "Hello" to all!
Shuvi
View 1 Replies
View Related
Apr 20, 2006
I have a dts package that imports data from a comma delimited .csv file.
I'm getting a conversion invalid for datatypes on column pair 1 (source 'col0012' (DBTYPE_STR), destination column 'latitude' (DBTYPE_R8)).
So, the source file is populated as a string for 'col002' and I have that field specified as a float within my table. Float is the correct type for the value.
How can I make the conversion correctly during the dts execution.
Thank you.
View 2 Replies
View Related
May 21, 2008
Using SQL 2005. Getting the following error. Using a cursor to update a table. I need to pass through the table two different times. The fields in the table update fine on the first time through, but on the 2nd time through I get the following error:
Conversion failed when converting datetime from character string.
Thank you for your help. David
FETCH NEXT FROM DEQ INTO
@GRGR_ID,
@SGSG_ID,
@SBSB_ID,
@PASS1_GENERATION_DATE,
@PASS1_TOTAL_AMOUNT_DUE,
@STATUS_FLAG,
@STATUS_FLAG_INSERT_DT
WHILE @@FETCH_STATUS = 0
BEGIN
UPDATE dbo.RPT_DELINQUENCY_TEST
SET PASS1_GENERATION_DATE = GETDATE()
WHERE SBSB_ID=@SBSB_ID AND GRGR_ID=@GRGR_ID
UPDATE dbo.RPT_DELINQUENCY_TEST
SET STATUS_FLAG = 'B'
WHERE SBSB_ID=@SBSB_ID AND GRGR_ID=@GRGR_ID
UPDATE dbo.RPT_DELINQUENCY_TEST
SET STATUS_FLAG_INSERT_DT = GETDATE()
WHERE SBSB_ID=@SBSB_ID AND GRGR_ID=@GRGR_ID
FETCH NEXT FROM DEQ INTO
@GRGR_ID,
@SGSG_ID,
@SBSB_ID,
@PASS1_GENERATION_DATE,
@PASS1_TOTAL_AMOUNT_DUE,
@STATUS_FLAG,
@STATUS_FLAG_INSERT_DT
END
View 4 Replies
View Related
Apr 19, 2007
Hi, can anyone please shed some light on this error:
[OLE DB Destination [466]] Error: There was an error with input column "Price" (518) on input "OLE DB Destination Input" (479). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
The column "price" is a numeric (9)
In the flat file connection manager, the datatype for the price column is a float [dt r4]. I've also tried numeric, etc.
How do I resolve this error?
Thanks much
View 11 Replies
View Related
Dec 21, 2005
Hi all,
Basically I am trying to create a package that will
(A) Create a table with specified datatypes
(B) Use a text Source file for the data
(C) on Success Completion of the "Execute SQL" transform the data from the text into the table.
Connect to DB <-- [TRANSFROM]-- Text (Source) <-- Execute SQL (Create Table)
It all seems to work now but when I run the package I get the following error
The number of failing rows exceeds the maximum specified.
TransformCopy 'DTSTransformation_6'conversion error: Conversion invalid for datatypes on column on pair 1 (source column 'Col007' (DBTYPE_STR),destination column 'Rec_Amt' (DBTYPE_CY)).
But when I go into the TransformDataTask, under transformation and test that column it all works fine, infact I tested all the columns and they all seem to work fine.
It also seems to be creating the same table twice first in the " Execute SQL" task and then again for some reason in the "DataTransform" task. I dont know if that is realted to the problem or not though.
Any idea's or suggestions I could try ?
Im very new to SQL 2000 & DTS so dont rule out any very newbie errors :)
Thanks
View 3 Replies
View Related
Jan 17, 2008
Hi,
I am getting the following error when
executing the ExecuteInsert in the code below..:
Conversion failed when converting
datetime from character string.
private bool
ExecuteInsert(String quantity)
{[snip]
con.Open();
SqlCommand command = new SqlCommand();
command.Connection = con;
TextBox TextBox1 =
(TextBox)FormView1.FindControl("TextBox1");
Label 1 = (Label)FormView1.FindControl("Label3");
Label 2 = (Label)FormView1.FindControl("Label13");
command.CommandText = "INSERT INTO Transactions (etc,Date,etc)
VALUES (etc,@date,@etc)";
command.Parameters.AddWithValue([snip]);
command.Parameters.AddWithValue([snip]); command.Parameters.AddWithValue("@date",
DateTime.Now.ToString());
command.Parameters.AddWithValue([snip]);
command.Parameters.AddWithValue([snip]);
command.ExecuteNonQuery();
con.Close();
command.Dispose();
return true; } protected
void Button2_Click(object sender, EventArgs e)
{ TextBox TextBox1 =
FormView1.FindControl("TextBox1") as TextBox;
bool retVal = ExecuteUpdate(Int32.Parse(TextBox1.Text));
if (retVal)
Response.Redirect("~/URL/EXTENSION.aspx");
Insert(); } private
void Insert() {
TextBox TextBox1 = FormView1.FindControl("TextBox1") as
TextBox;
ExecuteInsert(TextBox1.Text); }} Thanks if someone can help!Jon
View 2 Replies
View Related
Nov 16, 2004
I have a function that retrieves a data set from a passed SQL string. I'm getting this weird error.
Input string was not in a correct format
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.FormatException: Input string was not in a correct format.
Source Error:
Line 205: sSQL = "Select * From LedgerDetails Where LedgerID = " & _LedgerID.ToString()
Line 206: msgbox(sSQL)
Line 207: TransactionDetails = GetDataSet(sSQL)
Line 208:
Line 209: _TransactionsIndex = CShort(Val(GetDataValue("Select Count() From LedgerDetails Where LedgerID = " & CStr(_LedgerID)))) -1
Source File: C:Documents and SettingsOwnerMy DocumentsUniversityFall 2004DSSASP WorkAlgorithmTest.aspx Line: 207
Stack Trace:
[FormatException: Input string was not in a correct format.]
Microsoft.VisualBasic.CompilerServices.DoubleType.Parse(String Value, NumberFormatInfo NumberFormat) +184
Microsoft.VisualBasic.CompilerServices.IntegerType.FromString(String Value) +96
[InvalidCastException: Cast from string "Select * From LedgerDetails Wher" to type 'Integer' is not valid.]
Microsoft.VisualBasic.CompilerServices.IntegerType.FromString(String Value) +211
I have no idea why, but it seems to trying to convert the string into an integer. Both the argument and the parameter in the function are strings. I checked on the internet and the usual response is this is because the SQL is incomplete, but I have it showing me the compiled SQL string, and it is not imcomplete. I've tried hotwiring the query to match something I know will work, and I still get the same error. I've also tried compile the string using .ToString() on my number portion, storing the converted number into a string and only combining strings on the call, using another string variable as a temporary holder, using the String.Concat function, and even CStr. There is no way possible that this thing is an integer when the call is sent...
Any ideas?
Shawn
View 1 Replies
View Related
Jul 12, 2005
I'm trying to create a jbo to run in SQL that will update my table DeviationMaster in crcwebauth table, with the value from qvqote in table invoice_tbl in database crcbrio...I get an error in the job that says...SQLSTATE 42000 Error 8114 Error converting data type varchar to numericThe field DNumber in the DeviationMaster table is numeric 9, and qvqote is char 6.I know about the cast/convert, but I havent been able to successfully do this. I was hoping someone could show me how to get around this problem.Here is my current SQL statement that triggers the above error:update crcwebauth.dbo.deviationmaster set ldate = (select max(qvdate) from crcbrio.dbo.invoice_tbl where DNumber = qvqote)
View 11 Replies
View Related
Feb 18, 2000
Can someone please help me.
I am running a 'simple' stored procedure from the Query Analyser (command - FindCustomer L18239, [ ]) which should return a name from a customer table from the input id. It does return the name but I keep getting the message
'Server: Msg 245, Level 16, State 1, Procedure FindCustomer, Line 9
Syntax error converting the varchar value 'Kevin ' to a column of data type int.' - Any ideas what I've done wrong?, thanks.
Kevin.
stored-proc (FindCustomer)-
CREATE PROCEDURE FindCustomer
(@CustID [char](30),
@CustName [char](15) OUTPUT)
AS
BEGIN
SELECT @CustName = (SELECT FirstName from Customer where CustId = @CustID)
RETURN @CustName
END
View 2 Replies
View Related
Aug 25, 2000
I am using DTS to import a DB2 table from the mainframe and export the table in text format to a shared folder. I want to convert two fields to a date format yyyy-mm-dd. RELSE_Date is in this format and Updtts is a timestamp coming from the mainframe. The text file is all vchar. In dts here is my query pulling from the mainframe
SELECT A.PROD_ORDER_NUMBER, A.DYE_SEQUENCE, A.STYLE,
A.COLOR, A.SIZE, A.STATUS_IND, A.STATUS_CODE,
A.QUANTITY_REC_DC, B.SHIP_OTFQ_QTY,
A.MRP_PACK_CODE, A.LABELS_PRINTED,
date(A.RELSE_DATE) as RELSE_DATE,
date(A.UPDTTS) as UPDtts, A.LOCATION
FROM DB2.WP1_PO_CUST_REQ A,
DB2.WP1_DYE_LOT_REQ B
WHERE A.PROD_ORDER_NUMBER = B.PROD_ORDER_NUMBER
AND A.DYE_SEQUENCE = B.DYE_SEQUENCE
AND A.STYLE = B.STYLE
AND A.COLOR = B.COLOR
AND A.SIZE = B.SIZE
AND (A.PROD_ORDER_NUMBER LIKE '__K____')
When I parse the query it accepts it. When I run the DTS I get an error stating (SQL STATE 220077 SQLCODE -180) The sting representation of a datetime value has invalid syntax. Does anyone have a suggestion on how to convert these fields before the text file is exported or another output format that is similar to .dat in comma delimited format? Thank you.
View 1 Replies
View Related
Apr 9, 2001
Why am I getting the following error during a SQL Server 6.5 conversion?
##### Monday, April 09, 2001 - 21:06:36 #####
LOGINSID: Unable to open SQL Server registry key
View 1 Replies
View Related
May 17, 2004
Hi,
New to the forum here, it seems like this is a good SQL Server resource...
I'm still somewhat in the learning phases of T-SQL coding, and so far what I've learned has been pretty beneficial...a problem i'm having at the moment though, is with some conversion. I created a stored procedure that basically takes all the records from one table to another. I'll paste the code onto here and show you what's flagging on me (comment about the error within code). It probably seems a bit convoluted, but the UserProfileValue table is something that I TOTALLY wish Microsoft had second-guessed (it's from SharePoint Portal Server 2003)
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_NULLS ON
GO
ALTER procedure profile_ImportUserProfileData
as
declare profile_curs cursor for
select UserProfileValue.RecordID, UserProfileValue.PropertyID, UserProfileValue.PropertyVal, PropertyList.PropertyName, PropertyList.DataType
from PropertyList
inner join UserProfileValue
on PropertyList.PropertyID = UserProfileValue.PropertyID
order by UserProfileValue.RecordId,
UserProfileValue.PropertyId
declare @RecordId int, @PropertyId int, @OldRecordId int
declare @PropertyVal sql_variant
declare @PropertyName nvarchar(20), @DataType nvarchar(20)
declare @table nvarchar(25)
set @table = 'UserProfileReportTable'
open profile_curs
fetch next from profile_curs into @RecordId, @PropertyId, @PropertyVal, @PropertyName, @DataType
if (@@fetch_status = -1)
begin
print 'End of table'
close profile_curs
deallocate profile_curs
return
end
while (@@fetch_status = 0)
begin
SET IDENTITY_INSERT UserProfileReportTable ON
insert UserProfileReportTable(RecordId)
values(@RecordId)
SET IDENTITY_INSERT UserProfileReportTable OFF
set @OldRecordId = @RecordId
fetch next from profile_curs into @RecordId, @PropertyId, @PropertyVal, @PropertyName, @DataType
if @DataType like 'nvarchar'
set @DataType = @DataType + '(20)'
while (@RecordId = @OldRecordId)
begin
declare @sql nvarchar(1000)
set @sql = 'update ' + @table
-- this next line is the one that's crapping out, saying "Incorrect syntax near @DataType"
set @sql = @sql + ' set ' + @PropertyName + ' = ' + convert(@DataType, @PropertyVal)
set @sql = @sql + ' where RecordId = ' + @RecordId
execute sp_executesql @sql
fetch next from profile_curs into @RecordId, @PropertyId, @PropertyVal, @PropertyName, @DataType
end
end
close profile_curs
deallocate profile_curs
GO
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO
I also tried cast(@PropertyVal as @DataType) but got the same results. I know it probably isn't the best idea to use a cursor, considering there are 3000+ records in UserProfileValue, but more than likely this procedure will only be run once, and I couldn't think of any better way to do it. Any help would be appreciated.
Thanks!
View 9 Replies
View Related
May 18, 2004
I'm importing data from a text table, into a temp table, and then on to a final working table. I'm running into difficulty converting data from text into a 'datetime' format. I'm getting the following error:
"Arithmetic overflow error" when trying to convert into a column with the data type "DateTime"
I half expected it to reject all conversions into a Date format because of the source file being in text format, but it allows this conversion in other columns.
If I switch the Data type to 'nvarchar' instead of 'datetime' it converts and pops up with a date format.
My question is: Will this nvarchar that looks like a date behave like a date? For example, if someone tries to perform a calculation with a date format, will the nvarchar suffice, or would it cause problems?
Any ideas?
View 1 Replies
View Related
Jun 12, 2008
Hello to all,
We've been running into this problem and it is becoming very urgent and critical to resolve it.
I am running a package called "Inventory", using a system (for both commercial and accounting operations, called "Sage") having "CBase" as database.
When we run the package to given date parameter "To Date", let's say "18/03/2008", it runs successfully.
However, when we run it to "31/03/2008", we got a error message (the message is translated from french), as following:
Simba ODBC Driver:
Error in a predicate
Conversion error into date type
Backup Memory pool invoked. Please report this error to customer support.
I will really appreciate any hint or feedback, helping me to resolve this issue.
Thank you in advance.
Leïla
View 2 Replies
View Related
Mar 4, 2006
hi guys,
i am passing date value from a textbox in c# and asp.net.
i am calling an sql procedure .
The result is binding to a datagrid.
my sql procedure is like this
create procedure searchComplaintdetails
(
@FirstName nvarchar(50),
@DueDate DateTime
)
as
DECLARE @SQL varchar(5000)
SET @SQL = 'select Customers.CustomerFirstName as Name,ComplaintLog.LogDate,ComplaintLog.LogID,
ComplaintLog.ComplaintStatus,ComplaintLog.DueDate,ComplaintCategories.CategoryName from ComplaintLog
Join ComplaintCategories on ComplaintLog.CategoryID=ComplaintCategories.CategoryID
join Customers on ComplaintLog.CustomerID=Customers.CustomerID
where ComplaintLog.IsActive=1'
IF Datalength(@FirstName)>0
SET @SQL = @SQL + ' AND Customers.CustomerFirstName LIKE ''' + @FirstName + '%'''
IF Datalength(@DueDate)>0
SET @SQL = @SQL + ' AND Convert(DateTime(10),ComplaintLog.DueDate,101) = '+@DueDate + ' '
EXEC (@SQL)
GO
my error is Syntax error converting datetime from character string.
if i pass nothing in test boxit will show another error
SqlDateTime overflow. Must be between 1/1/1753 12:00:00 AM and 12/31/9999 11:59:59 PM.
View 4 Replies
View Related
Jan 12, 2008
I am getting an issue when I am using a stored proc from a view.
I am to returning values, one being a varchar(50).
When I run the view, the values for this column and all others are returned fine.
When I run the stored procedure, the following error is shown:
Conversion failed when converting the varchar value 'ejoy' to data type int.
All other values return fine bar this one column and as I said its already a varchar in the table so I don't know why sql server (2005) thinks I want to convert it, I don't and at no point have tried to.
Below is my query statement
quote:SELECT u.User_fname, pv.PV_address, p.Start_monitoring, p.Last_monitoring, p.Period_of_monitoring, m.Ongoing_maintenance,
m.Savings_for_inverter_replacement, m.Monitoring, m.Total_anual_maint_and_monitor
FROM PerformanceData p, MonitoringCost m, Photovoltaic pv, Users u
WHERE p.Performance_id=m.MonitoringCost_id and
pv.PV_id=p.Performance_id and
pv.PV_id=m.MonitoringCost_id and
u.User_id =p.Performance_id and
u.User_id =pv.PV_id and
u.User_id = m.MonitoringCost_id
This error has been displayed
quote:Conversion failed when converting the varchar value 'ejoy' to data type int.
Any ideas much appreciated...
View 16 Replies
View Related
Jan 2, 2008
Hi,
I keep getting this conversion error when I run this query: If I comment from the second part of the where clause it goes away? I can't figure out how to fix this!
Msg 245, Level 16, State 1, Line 1
Conversion failed when converting the varchar value 'B' to data type int.
Select sE.SSN,
sE.enroll_yyyyQ_Code,
sE.Sched_Switch,
sE.gdb_Switch,
sE.Fee_Switch,
sE.Rank_Code,
sE.Class_Code,
sE.Status_Code,
sE.Prim_Coll_Code,
sE.Secondary_Coll_Code,
sE.Dept_Major_Code,
sR.Client_ID,
sR.Contact_Number,
master.dbo.fn_InitCap(nM.last_name) Last_Name,
master.dbo.fn_InitCap(nM.first_name) First_Name,
master.dbo.fn_InitCap(nM.mid_name) Middle_Name,
nM.sfx_name,
eA.Published_eMail_Address
/* Tables ................................................................ */
From FCoBDB.Student_Current.dbo.enrollment sE With ( noLock )
JOIN FCOBDB.Student_Current.dbo.Name nM With ( noLock )
ON sE.SSN = nM.SSN
LEFT OUTER JOIN FCoBDB.Student_Current.dbo.eMail_Address eA With ( noLock )
ON sE.SSN = eA.SSN
LEFT OUTER JOIN ADIS_Import_Support.dbo.Student_Records sR With ( noLock )
ON sE.SSN = sR.SSN
/* Selection Clauses ...................................................... */
Where
/* Undergraduate Business Students .................................. */
( sE.prim_coll_code = 'BUS' and
sE.dept_major_code <> '805' and
sE.status_code = 1 and /* Good citizens */
sE.enroll_yyyyq_code = 20074 and /* current quarter only */
sR.Client_ID IS NULL ) /* Data not in Maximizer! */
or /* Executive Education Students ..................................... */
( sE.prim_coll_code = 'GRD' and
sE.dept_major_code = '296' and
sE.status_code = 1 and /* Good citizens */
sE.enroll_yyyyq_code = 20074 and /* current quarter only */
sR.Client_ID IS NULL ) /* Data not in Maximizer */
/* Sort Options ........................................................... */
order By nM.last_name, nM.first_name ;
View 4 Replies
View Related
Feb 25, 2008
I have created an SSIS package
to run on a SQL 2005 server. This SSIS pkg was migrated from 2000 to 2005. There a Data transform task in that package to transfer data from a tbl on one server to another.
In source tbl, datatype is text, and in dest (2005 tbl) datatype is nvarchar(1000). This data transfer worked just fine , in 2000 but in 2005 it is giving the foll error.
But when I run my package, i get back the following error
'Column "xxx" cannot convert between unicode and non-unicode string data types'.
I tried using the data covnersion task, to convert to DT-STR, But is still failing.
View 11 Replies
View Related
Jan 31, 2008
Hi, I'm trying to do the following in a variable. I keep getting the error expression cannot be evaluated.
select "BDE" + case when len(datepart(month, getdate())) = 1
then +"0"+(DT_WSTR,2) MONTH( GETDATE() ) +"0"+(DT_WSTR,2) datepart("dd",getdate())
else (DT_WSTR,2) MONTH( GETDATE() ) +(DT_WSTR,2) datepart("dd",getdate()) end
when I just run len(datepart("mm", getdate())) , I get the operand needs to be explicity cast with a cast operator.
Any suggestions? How do I get it to recoginize len(datepart("mm", getdate())) ?
View 5 Replies
View Related
May 21, 2008
Hi everyone,
I have a problem with a datetime field.
In the database is stored as datetime (121 format) ex. 2008-05-20 17:30:00.000
I have a simple select query (no datetime conversions used) and the result I get from the report looks like 5/20/2008 5:30 PM.
I dont want this format so i use this custom dd:MM:yyyy hh:mms
After that i get the dates like this 5/20/2008 5:30 instead of 17:30.
Any suggestions appreciated...
View 1 Replies
View Related
May 13, 2008
Hi
I am getting the following error when I try to do a simple data conversion of columns, the columns I am converting are integer and nvarchar and I am converting them into DT_str.
[Data Conversion [16]] Error: Data conversion failed while converting column 'A' (53) to column "Copy of A" (95). The conversion returned status value 8 and status text "DBSTATUS_UNAVAILABLE".
[Data Conversion [16]] Error: The "output column "Copy of A" (95)" failed because error code 0xC020908E occurred, and the error row disposition on "output column "Copy of A" (95)" specifies failure on error. An error occurred on the specified object of the specified component.
Thanks
View 3 Replies
View Related
May 22, 2007
Hi,
I am transferring data from a Flat file source to SQL Database. Initially I got validation error saying
"Validation error. Import Employee Information: [DataFlowTask] [6384]: The column "[ColumnName] " can't be inserted because the conversion between types DT_STR and DT_DBTIMESTAMP is not supported." ( i have 6 date fields)
The destination in SQL has the field in "datetime" format.
So i used a "Data Conversion" task to transform the fields, thereby resolving the validation errors. But when i Execute the dtsx I get the following error :
[Data Conversion [322]] Error: Data conversion failed while converting column "[ColumnName]" (79) to column "[Modified_ColumnName]" (346). The conversion returned status value 2 and status text "The value could not be converted because of a potential loss of data.".
[Data Conversion [322]] Error: The "output column "[Modified_ColumnName]" (346)" failed because error code 0xC020907F occurred, and the error row disposition on "output column "[Modified_ColumnName]" (346)" specifies failure on error. An error occurred on the specified object of the specified component.
[DTS.Pipeline] Error: The ProcessInput method on component "Data Conversion" (322) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0209029.
["InputFileName" Input [1]] Error: Setting the end of rowset for the buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: The PrimeOutput method on component "InputFileName Input" (1) returned error code 0xC0209017. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
Can anybody help me with this?
View 5 Replies
View Related
Aug 10, 2006
I have a table that has a date column formatted as char(6), MMDDYY. The dates need to be converted to datetime. I use the following command:
UPDATE Table1
SET CorrectedDate = CONVERT(datetime, SUBSTRING(Date, 5, 2) + SUBSTRING(Date, 1, 2) + SUBSTRING(Date, 3, 2), 1)
That works until it hits a date formatted incorrectly. The date could have blank spaces, double zeros or an invalid month/day/year (e.g. 033986). The command stops with a conversion error and no values are written to the CorrectedDate fields.
Is there a way to have the command skip the invalid dates and continue to write the datetime conversion for the dates that are formatted correctly?
Edit: Forgot to mention this is on SQL Server 2005 (not Express).
View 4 Replies
View Related
Jun 29, 2015
I'm trying to use Bulk insert for the first time and getting the following error. I think it might have something to do with my Format File and from the error msg there's a conversion error for the first column. In my database the Field is nvarchar(6) so my best guess is to use SQLNChar for the first column. I've checked the end of each line is CR LF therefore the is correct for line 7 right?
Msg 4863, Level 16, State 1, Line 1
Bulk load data conversion error (truncation) for row 1, column 1 (ASXCode).
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.
Msg 7330, Level 16, State 2, Line 1
Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".
BULK
INSERTtbl_ASX_Data_temp
FROM
'M:DataASXImportTest.txt'
WITH
(FORMATFILE='M:DataASXSQLFormatImport.Fmt')
[code]...
View 5 Replies
View Related
Nov 6, 2007
Hi,I keep getting the error:System.Data.SqlClient.SqlException: Conversion failed when converting the varchar value '@qty' to data type int. When I initiate the insert and update.I tried adding a: Convert.ToInt32(TextBox1.Text), but it didn't work.. Could someone help?My code:private bool ExecuteUpdate(int quantity){ SqlConnection con = new SqlConnection(); con.ConnectionString = "Data Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\ASPNETDB.MDF;Integrated Security=True;User Instance=True"; con.Open(); SqlCommand command = new SqlCommand(); command.Connection = con; TextBox TextBox1 = (TextBox)FormView1.FindControl("TextBox1"); Label labname = (Label)FormView1.FindControl("Label3"); Label labid = (Label)FormView1.FindControl("Label13"); command.CommandText = "UPDATE Items SET Quantityavailable = Quantityavailable - '@qty' WHERE productID=@productID"; command.Parameters.Add("@qty", TextBox1.Text); command.Parameters.Add("@productID", labid.Text); command.ExecuteNonQuery(); con.Close(); return true;} private bool ExecuteInsert(String quantity) { SqlConnection con = new SqlConnection(); con.ConnectionString = "Data Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\ASPNETDB.MDF;Integrated Security=True;User Instance=True"; con.Open(); SqlCommand command = new SqlCommand(); command.Connection = con; TextBox TextBox1 = (TextBox)FormView1.FindControl("TextBox1"); Label labname = (Label)FormView1.FindControl("Label3"); Label labid = (Label)FormView1.FindControl("Label13"); command.CommandText = "INSERT INTO Transactions (Usersname,Itemid,itemname,Date,Qty) VALUES (@User,@productID,@Itemsname,@date,@qty)"; command.Parameters.Add("@User", System.Web.HttpContext.Current.User.Identity.Name); command.Parameters.Add("@Itemsname", labname.Text); command.Parameters.Add("@productID", labid.Text); command.Parameters.Add("@qty", Convert.ToInt32(TextBox1.Text)); command.Parameters.Add("@date", DateTime.Now.ToString()); command.ExecuteNonQuery(); con.Close(); return true; }protected void Button2_Click(object sender, EventArgs e){ TextBox TextBox1 = FormView1.FindControl("TextBox1") as TextBox; ExecuteUpdate(Int32.Parse(TextBox1.Text) );}protected void Button2_Command(object sender, CommandEventArgs e) { if (e.CommandName == "Update") { TextBox TextBox1 = FormView1.FindControl("TextBox1") as TextBox; ExecuteInsert(TextBox1.Text); } } Thanks so much if someone can!Jon
View 33 Replies
View Related
Apr 21, 2008
Using SQL Server 2005, I hve encountered a very strange error which I cannot figure out. The simplified stored proc below basically does a select and sorts the records based on the column name given in the @SortCol parameter. When I enter the field names bapk, jhpk, etc everything works fine. The records are returned sorted by the field name entered into the parameter. The first eight variables are field names and types When I enter the field name 'descr' into the @SortCol variable/parameter, I receive the error: Msg 295, Level 16, State 3, Procedure CMSCheck2, Line 28Conversion failed when converting character string to smalldatetime data type. I don't see where this is coming from at all. The problem is in the stored proc lines beginning with 'CASE @SortCol'If I take out the lines and just use OVER (Order By descr) as RowNum -- everything is fineIf I delete the line WHEN 'descr' THEN descr -- everything is fine, it just falls through to the default. What is the problem? Where is a conversion to smalldatetime coming from? I've been working on this one for a while, and cannot figure it out. It must be something simple. Thanks,Mike Thomas Below is the stored proc and a testing script TESTING SCRIPTUSE biz03GODECLARE @bapk int, @jhpk int, @transdate smalldatetime, @number smallint, @descr nvarchar(50), @debit decimal(9,2), @credit decimal(9,2), @cmonth tinyint, @StartRowIndex int, @MaxRows int, @AlphaChar varchar(1), @SortCol varchar(20) SET @MaxRows = 10SET @StartRowIndex = 0SET @SortCol = 'descr'SET @AlphaChar = ''EXEC [dbo].[CMSCheck2] @bapk, @jhpk, @transdate, @number, @descr, @debit, @credit, @cmonth, @StartRowIndex, @MaxRows, @AlphaChar, @SortCol STORED PROC ALTER PROCEDURE [dbo].[CMSCheck2] @bapk int, @jhpk int, @transdate smalldatetime, @number smallint, @descr nvarchar(50), @debit decimal(9,2), @credit decimal(9,2), @cmonth tinyint, @StartRowIndex int, @MaxRows int, @AlphaChar varchar(1) = null, @SortCol varchar(20) = nullASBEGINSET NOCOUNT ONDECLARE @lPaging bitIF @AlphaChar is null SET @lPaging = 0ELSE SET @lPaging = 1;WITH BankListTemp AS (SELECT bapk, jhpk, transdate, number, descr, debit, credit, cmonth, ROW_NUMBER() OVER (ORDER BY CASE @SortCol WHEN 'bapk' THEN bapk WHEN 'jhpk' THEN jhpk WHEN 'transdate' THEN transdate WHEN 'number' THEN number WHEN 'descr' THEN descr -- problem here -- WHEN 'debit' THEN debit WHEN 'credit' THEN credit WHEN 'cmonth' THEN cmonth ELSE bapk END) as RowNum FROM bank)SELECT TOP (@MaxRows) bapk, jhpk, transdate, number, descr, debit, credit, cmonth, RownumFROM ( SELECT BankListTemp.*, (SELECT COUNT(*) FROM BankListTemp) AS RecCount FROM BankListtemp) BankEND
View 6 Replies
View Related
Feb 15, 2002
Hi
We have the problem with Text data type. We can insert into Text column from few work stations but not from few. This is the following error we are getting
COde page translations are not supported for the text data type. From:1252 To: 850.
If anybody has solutions advance thanks to them.
Thanks,
Rau
View 1 Replies
View Related
Feb 14, 2006
on a column DateNew = DateTimei am trying :INSERT INTO [dbo].[Users] (DateNew) VALUES ('2003/01/31 10:04:14')and i get an error :conversion of char data type to datetime data type resulted in an out of range datetime valueI had never this error before , do you know why ?i must enter a yyyy/mm/dd format because this database will be used for Fr and Us langagesthank you for helping
View 14 Replies
View Related
May 15, 2013
I'm trying to pull a list of users with upcoming or recently passed birthdays. I'm using a CAST to create a birthday of the person using their actual birth month and day, but substituting the current day. This CAST works just fine in the actual query, but fails when I put it in the WHERE clause with the error: Conversion failed when converting date and/or time from character string. I don't see how it can work in one area and not in the other.
Code:
SELECT
P.EMF_EMPL_ID,
CAST(Month(P.EMF_BIRTH_DATE8) AS varchar) + '/' + CAST(Day(P.EMF_BIRTH_DATE8) AS varchar) AS Birthday,
DateDiff(d, getdate(), CAST(CAST(Month(P.EMF_BIRTH_DATE8) AS varchar) + '/' + CAST(Day(P.EMF_BIRTH_DATE8) AS varchar) + '/' +
[code]...
View 6 Replies
View Related
