Convert SQL Code To Stored Proc
Dec 23, 2004
Dear All,
Lately i have started to convert my sql code to stored procedures, however i am still a bit new on this matter.
I have the following Sql Statement which I wish to convert to a stored procedure:-
SELECT MAX(" & id & ") As maxID FROM " & table
where id and table are parameters that I am passing to this sql from a function which is called getMaxID
for example, in the vb.net code i call it as follows:-
getMaxID("personID", "persons")
Can anyone tell me how to convert it to a Stored Proc please
Thanks for your help and time
Johann
View 2 Replies
ADVERTISEMENT
Jul 25, 2007
Hey all,
I have access as my front end and has upsized to sql server 2000.
DLookup function that was in VBA code before was working fine. but after upsizing there is the problem in that code...
What could be the alternative for DLookup Function in sql server..
Do i have to write a view or stored procedure..?
Any Help appreciated.
View 14 Replies
View Related
Dec 10, 2007
Using SQL Server 2005. Writing SQL code but I need to use the reults from two different stored proc. How do you code a select statement using a stored proc. I know when using views you just use the view name in the From or join statemnt, but do you do the same with using a Stored proc. Thank you for your help. David
View 5 Replies
View Related
May 4, 2007
Hello,
I am using this sql script to achieve paging functionality for a site. IT works great for the most part, except when I need to return a result set that includes other tables.
How can I add another parameter to this to allow joined table to be a paramter? I'd like to pass in the join table name and columns to join on, or a custom select statement I guess?
CREATE PROCEDURE GetSortedPage(
@TableName VARCHAR(50),
@PrimaryKey VARCHAR(25),
@SortField VARCHAR(100),
@PageSize INT,
@PageIndex INT = 1,
@QueryFilter VARCHAR(100) = NULL
) AS
SET NOCOUNT ON
DECLARE @SizeString AS VARCHAR(5)
DECLARE @PrevString AS VARCHAR(5)
SET @SizeString = CONVERT(VARCHAR, @PageSize)
SET @PrevString = CONVERT(VARCHAR, @PageSize * (@PageIndex - 1))
IF @QueryFilter IS NULL OR @QueryFilter = ''
BEGIN
EXEC(
'SELECT * FROM ' + @TableName + ' WHERE ' + @PrimaryKey + ' IN
(SELECT TOP ' + @SizeString + ' ' + @PrimaryKey + ' FROM ' + @TableName + ' WHERE ' + @PrimaryKey + ' NOT IN
(SELECT TOP ' + @PrevString + ' ' + @PrimaryKey + ' FROM ' + @TableName + ' ORDER BY ' + @SortField + ')
ORDER BY ' + @SortField + ')
ORDER BY ' + @SortField
)
EXEC('SELECT (COUNT(*) - 1)/' + @SizeString + ' + 1 AS PageCount FROM ' + @TableName)
END
ELSE
BEGIN
EXEC(
'SELECT * FROM ' + @TableName + ' WHERE ' + @PrimaryKey + ' IN
(SELECT TOP ' + @SizeString + ' ' + @PrimaryKey + ' FROM ' + @TableName + ' WHERE ' + @QueryFilter + ' AND ' + @PrimaryKey + ' NOT IN
(SELECT TOP ' + @PrevString + ' ' + @PrimaryKey + ' FROM ' + @TableName + ' WHERE ' + @QueryFilter + ' ORDER BY ' + @SortField + ')
ORDER BY ' + @SortField + ')
ORDER BY ' + @SortField
)
EXEC('SELECT (COUNT(*) - 1)/' + @SizeString + ' + 1 AS PageCount FROM ' + @TableName + ' WHERE ' + @QueryFilter)
END
RETURN 0
View 6 Replies
View Related
May 1, 2007
This is for SQL Server 2005
The problem: I need to validate all stored procedures on my server that they have not been altered after the application has been created.
Our server installation creates the user stored procedures for the application. Once created, I need a way to validate that the proc code has not been altered.
Previously, we were validating against the value of stats_schema_ver and crdate in the sysobjects table for the given stored procedure. During installation we would create a hash value of the crdate and stats_schema_Ver values for all our user defined procs. Then during validation, we would recreate the hash value and compare to that created during installation. If they differed, we knew that the proc code had been altered in some way.
Any alteration of the stored proc would update the stats_schema_ver- if the proc was dropped and recreated, it would update the crdate.
In 2005, the stats_shema_ver value is no longer updated when the proc is altered.
Perhaps this method was completely off-base to begin with...
So, how *does* one verify after installation that no proc code has been altered since installation?
The other option was to create a hash of the proc text definition- but that seems absolutely tedious to rehash the current proc definition every time the proc is accessed. There's also the problem that if you use the "with encryption" directive, it's no longer easy to get the text definition of the proc back out.
Appreciate any general thoughts or specific feedback.
Cheers,
Eric
View 12 Replies
View Related
May 7, 2008
I have a database trigger that is set to call a CLR trigger/stored proc when a certain field in a table is updated. The issue is that if i execute the stored proc manually in enterprise studio, it works perfectly but the same call made through the trigger does not go through. A few more details -
I have CLR integration enabled on the sql server.
The dbo has UNSAFE ASSEMBLY rights
I have the both the assembly and the serialized dll imported in the database.
Here's the definition of the stored proc -
CREATE PROCEDURE [dbo].[WriteXMLNotification]
@TaskID [nvarchar](20)
WITH EXECUTE AS CALLER
AS
EXTERNAL NAME [DataInterfaceWebServices].[TaskUpdateXMLWriter.WriteXMLNotification].[run]
and the trigger -
CREATE TRIGGER [dbo].[tr_Task_U]
ON [dbo].[_Task]
FOR UPDATE, INSERT AS
IF UPDATE (TaskType_Status) OR UPDATE (TaskType) OR UPDATE (TaskType_SubType1)
BEGIN
SET NOCOUNT ON;
DECLARE @status AS INT
DECLARE @taskType AS INT
DECLARE @taskSubType AS INT
DECLARE @taskID as sysname
DECLARE @cmd as sysname
DECLARE @parentTask as sysname
DECLARE @NotificationXMLTaskID as sysname
SELECT @status = [TaskType_Status] FROM inserted
SELECT @taskType = [TaskType] FROM inserted
SELECT @taskSubType = [TaskType_SubType1] FROM inserted
SELECT @taskID = [TaskID] FROM inserted
SELECT @parentTask = [Parent_TaskID] FROM inserted
SELECT @NotificationXMLTaskID = [MCCTaskID] FROM _TaskNotificationXML WHERE [MCCTaskID] = @parentTask
IF (@status = 2602) AND (@taskType = 2282) AND (@taskSubType = 19500)
BEGIN
exec WriteXMLNotification @taskID;
END
ELSE IF (@taskType = 2285) AND (@parentTask IS NOT NULL) AND (@NotificationXMLTaskID IS NOT NULL)
BEGIN
exec WriteXMLNotification @parentTask;
END
END
I stepped into the trigger and it seems to execute the line " exec WriteXMLNotification @taskID;" but nothing happens, but if I run that same line manually, it works. Could it be that the impersonation by the EXECUTE AS clause is causing it to fail?
Please advise!
Thanks in Advance,
-Mihir Sonalkar.
View 1 Replies
View Related
Aug 22, 2004
I am trying to debug sql2000 sp from managed code app with VS.Net 2003 archetect Ed..
It did not stop at the break point within the sql sp.
I did granted execute permission for sp_sdidebug.
Do I need to attach any process?
Is there anything left off by the article?
I referenced msdn article option 2: http://support.microsoft.com/default.aspx?kbid=316549
Thanks.
View 3 Replies
View Related
Mar 17, 2006
I have the following ASP code that builds part of the example SQL statement below (it's the same SQL as in my earlier thread here (http://www.dbforums.com/showthread.php?t=1214044) but a very different question):
if sFindTicketEventId > 0 then sSQL = sSQL & " AND [tblEvents].[id]=" & sFindTicketEventId
if sFindTicketStandId > 0 then sSQL = sSQL & " AND [tblStands].[id]=" & sFindTicketStandId
SELECT
[tblC].[id] AS CombinationID,
[tblC].[availability],
[tblC].[description],
[tblC].[price] AS combinationPrice,
[tblC].[combination_open],
[tblT].[TicketID] AS TicketID,
[tblT].[price] AS ticketPrice,
[tblT].[availability],
[tblT].[ticket_open],
[tblT].[quantity],
[tblT].[event_name],
[tblT].[event_open],
[tblT].[stand_name],
[tblT].[stand_open],
[tblT].[admission_start_date],
[tblT].[admission_end_date],
[tblT].[date_open],
[tblT].,
[tblT].,
[tblT2].[description],
[tblT2].[admin_description]
FROM(
SELECT
[tblCombinations].[id],
[tblTickets].[id] As TicketID, [tblTickets].[price], [tblTickets].[availability], [tblTickets].[ticket_open],
[tblCombinations_Tickets].[quantity],
[tblEvents].[event_name],
[tblEvents].[event_open],
[tblStands].[stand_name],
[tblStands].[stand_open],
[tblAdmissionDates].[admission_start_date],
[tblAdmissionDates].[admission_end_date],
[tblAdmissionDates].[date_open],
[tblBookingDates].[booking_start_date],
[tblBookingDates].[booking_end_date]
FROM [tblCombinations]
LEFT JOIN [tblCombinations_Tickets] ON [tblCombinations_Tickets].[combination_id] = [tblCombinations].[id]
LEFT JOIN [tblTickets] ON [tblCombinations_Tickets].[ticket_id] = [tblTickets].[id]
LEFT JOIN [tblEvents] ON [tblEvents].[id] = [tblTickets].[event_id]
LEFT JOIN [tblStands] ON [tblStands].[id] = [tblTickets].[stand_id]
LEFT JOIN [tblAdmissionDates] ON [tblAdmissionDates].[id] = [tblTickets].[admission_date_id]
LEFT JOIN [tblBookingDates] ON [tblBookingDates].[id] = [tblTickets].[booking_date_id]
LEFT JOIN [tblTicketConcessions] ON [tblTicketConcessions].[id] = [tblTickets].[ticket_concession_id]
LEFT JOIN [tblBookingQuantities] AS [tblBookingMinQuantities] ON [tblBookingMinQuantities].[id] = [tblTickets].[booking_min_quantity_id]
LEFT JOIN [tblBookingQuantities] AS [tblBookingMaxQuantities] ON [tblBookingMaxQuantities].[id] = [tblTickets].[booking_max_quantity_id]
LEFT JOIN [tblMemberships] ON [tblMemberships].[id] = [tblTickets].[membership_id]
WHERE 1=1
[B]AND [tblEvents].[id]=2
[B]AND [tblStands].[id]=3
--AND [tblAdmissionDates].[id]=@admissionDateId
--AND [tblBookingDates].[id]=@bookingDateId
--AND [tblTicketConcessions].[id]=@concessionId
--AND [tblBookingMinQuantities].[id]=@bookingMinQuantityId
--AND [tblBookingMaxQuantities].[id]=@bookingMaxQuantityId
--AND [tblMemberships].[id]=@membershipId
GROUP BY
[tblCombinations].[id],
[tblTickets].[id],
[tblTickets].[price], [tblTickets].[availability], [tblTickets].[ticket_open],
[tblCombinations_Tickets].[quantity],
[tblEvents].[event_name],
[tblEvents].[event_open],
[tblStands].[stand_name],
[tblStands].[stand_open],
[tblAdmissionDates].[admission_start_date],
[tblAdmissionDates].[admission_end_date],
[tblAdmissionDates].[date_open],
[tblBookingDates].[booking_start_date],
[tblBookingDates].[booking_end_date]
) as [tblT]
JOIN [tblCombinations] as [tblC] on [tblT].[id]=[tblC].[id]
LEFT JOIN [tblTickets] as [tblT2] on [tblT].[TicketID]=[tblT2].[id]
I want to turn this SQL into a stored proc; there are currently about 8 parameters that I want to pass into it. The field value for each will be either NULL or a positive integer, and the paramater will be passed in as an integer.
If the passed parameter value is a positive integer then it should return all records where the corresponding field value matches that integer. If the passed parameter is 0, it should return all rows regardless of whether the field value is an integer or NULL.
And I can't for the life of me figure out how to do it. Do I need an IF statement in there or something?
:confused:
View 2 Replies
View Related
Jul 20, 2005
I'm writing an application using VB 6.0 as the front-end GUI, and theMSDE version of SQL Server as the back-end (it's a program for areally small # of users --- less then 3-4).I'm trying to determine, through the Visual Basic interface, thepermissions of each user that's using the application on his/hermachine.For example, let's say I'm user "Michael" that's sitting down at mymachine using the app. I've written. The security for logging intoSQL Server will be setup using Windows Security (Trusted Connection)as opposed to Windows & SQL Server security. When Michael accesses aparticular form in the VB 6.0 GUI, I want to run some code thatautomatically checks Michael's permission levels on the underlyingtable (actually, a stored procedure supplying the data from the table)that supplies the data to the form he's looking at and then give himsome feedback on the form as to what type of permissions he has whilehe's browsing through the data shown in the form.For example, Michael opens a particular form, code in the backgroundis run to identify that this is Michael accessing the form, the codereturns a value that identifies what type of permissions he has on thedata in the form, and a text box on the form informs Michael (forexample) that he only has read-only permissions to the data he isviewing and cannot edit any of the data.As another example, user Karen sits down at her computer, logs intothe application, opens the same form that Michael just opened, thecode is run in VB to detect the level of permissions she has on thedata being displayed in the form, and the text box on the form informsher that she has editing permissions on the data in the underlyingtable.Etc...If anyone can post an example of the code they use in accomplishingthis task in an application they've written, I'd really appreciate apoint in the right direction or a real-world example that's beenimplemented by one of you. I've written several apps. thus far usingMSDE as the back-end, but the previous apps. I've written were forclients that didn't care about restricting access to theapplication... everyone could pretty much use the application as theydesired and do anything they desired to the data.The current client I'm writing the app. mentioned here for wants tohave security in place to where various users access the applicationwith various levels of permissions to do stuff (or *not* do stuff) tothe data in the application.Thanks very much in advance for any assistance / code provided!Sincerely,Brad McCollumJoin Bytes!
View 1 Replies
View Related
May 30, 2007
I am trying to use SSIS to update an AS400 DB2 database by calling a stored procedure on the AS400 using an OLE DB command object. I have a select statement running against the SQL Server 2005 that brings back 20 values, all of which are character strings, and the output of this select is piped into the OLE DB command object. The call from SSIS works just fine to pass parameters into the AS400 as long as the stored procedure being called does not have an output parameter defined in its signature. There is no way that I can find to tell the OLE DB command object that one of the parameters is an output (or even an input / output) parameter. As soon as one of the parameters is changed to an output type, I get an error like this:
Code Snippet
Error: 0xC0202009 at SendDataToAs400 1, OLE DB Command [2362]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF.
Error: 0xC0047022 at SendDataToAs400 1, DTS.Pipeline: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "OLE DB Command" (2362) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
Error: 0xC0047021 at SendDataToAs400 1, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0202009. There may be error messages posted before this with more information on why the thread has exited.
Information: 0x40043008 at SendDataToAs400 1, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x40043009 at SendDataToAs400 1, DTS.Pipeline: Cleanup phase is beginning.
Task failed: SendDataToAs400 1
Warning: 0x80019002 at RetrieveDataForSchoolInitiatedLoans: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Warning: 0x80019002 at Load_ELEP: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Load_ELEP.dtsx" finished: Failure.
I really need to know if the call to the AS400 stored procedure succeeded or not, so I need a way to obtain and evaluate the output parameter. Is there a better way to accomplish what I am trying to do? Any help is appreciated.
View 3 Replies
View Related
May 19, 2006
I am just trying to capture the return code from a stored proc as follows and if I get a 1 I want the SQL Task to follow a failure(red) constrainst workflow and send a SMTP mail task warning the customer. How do I achieve the Exec SQL Task portion of this, i get a strange error message [Execute SQL Task] Error: There is an invalid number of result bindings returned for the ResultSetType: "ResultSetType_SingleRow".
Using OLEDB connection, I utilize SQL: EXEC ? = dbo.CheckCatLog
EXEC SQL Task Editer settings:
RESULTSET: Single Row
PARAMETER MAPPING: User::giBatchID
DIRECTION: OUTPUT
DATATYPE: LONG
PARAMETER NAME: 0
PS-Not sure if I need my variable giBatchID which is an INT32 but I thought it is a good idea to feed the output into here just in case there is no way that the EXEC SQL TASK can chose the failure constrainst workflow if I get a 1 returned or success constraint workflow if I get a 0 returned from stored proceedure
CREATE PROCEDURE CheckCatLog
@OutSuccess INT
AS
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON
DECLARE @RowCountCAT INT
DECLARE @RowCountLOG INT
---these totals should match
SELECT @RowCountCAT = (SELECT Count(*) FROM mydb_Staging.dbo.S_CAT)
SELECT @RowCountLOG = (SELECT Count(*) FROM mydb_Staging.dbo.S_LOG)
--PRINT @RowCountCAT
--PRINT @RowCountLOG
BEGIN
IF @RowCountCAT <> @RowCountLOG
--PRINT 'Volume of jobs from the CAT file does not match volume of jobs from the LOG file'
--RETURN 1
SET @OutSuccess = 1
END
GO
Thanks in advance
Dave
View 6 Replies
View Related
Jul 23, 2006
I'm having a strange problem that I can't figure out. I have an SQL stored procedure that updates a small database table. When testing the Stored Procedure from the Server Explorer, it works fine. However, when I run the C# code that's supposed to use it, the data doesn't get saved. The C# code seems to run correctly and the parameters that are passed to the SP seem to be okay. No exceptions are thrown.
The C# code:
SqlConnection conn = new SqlConnection(ConfigurationManager.ConnectionStrings["touristsConnectionString"].ConnectionString);
SqlCommand cmd = new SqlCommand("fort_SaveRedirectURL", conn);
cmd.CommandType = CommandType.StoredProcedure;
Label accomIdLabel = (Label)DetailsView1.FindControl("lblID");
int accomId = Convert.ToInt32(accomIdLabel.Text);
cmd.Parameters.Add("@accomId", SqlDbType.Int).Value = accomId;
cmd.Parameters.Add("@path", SqlDbType.VarChar, 250).Value = GeneratePath();
try
{
conn.Open();
cmd.ExecuteNonQuery();
}
catch(Exception ex)
{
throw ex;
}
finally
{
conn.Close();
}
The Stored Procedure:
ALTER PROCEDURE developers.fort_SaveRedirectURL
(
@accomId int,
@path varchar(250)
)
AS
DECLARE
@enabled bit,
@oldpath varchar(250)
/* Ensure that the accommodation has been enabled */
SELECT @enabled = enabled FROM Experimental_Accommodation
WHERE Experimental_Accommodation.id = @accomId
IF (@enabled = 1)
BEGIN
/* Now check if a path already exists */
SELECT @oldpath = oldpath FROM Experimental_Adpages_Redirect
WHERE Experimental_Adpages_Redirect.accom_id = @accomId
IF @oldpath IS NULL
BEGIN
/* If Path already exists then we should keep the existing URL */
/* Otherwise, we need to insert a new one */
INSERT INTO Experimental_Adpages_Redirect
(oldpath, accom_id)
VALUES (@path,@accomId)
END
END
RETURN
View 2 Replies
View Related
Feb 13, 2008
I am working with a large application and am trying to track down a bug. I believe an error that occurs in the stored procedure isbubbling back up to the application and is causing the application not to run. Don't ask why, but we do not have some of the sourcecode that was used to build the application, so I am not able to trace into the code.
So basically I want to examine the stored procedure. If I run the stored procedure through Query Analyzer, I get the following error message:
Msg 2758, Level 16, State 1, Procedure GetPortalSettings, Line 74RAISERROR could not locate entry for error 60002 in sysmessages.
(1 row(s) affected)
(1 row(s) affected)
I don't know if the error message is sufficient enough to cause the application from not running? Does anyone know? If the RAISERROR occursmdiway through the stored procedure, does the stored procedure terminate execution?
Also, Is there a way to trace into a stored procedure through Query Analyzer?
-------------------------------------------As a side note, below is a small portion of my stored proc where the error is being raised:
SELECT @PortalPermissionValue = isnull(max(PermissionValue),0)FROM Permission, PermissionType, #GroupsWHERE Permission.ResourceId = @PortalIdAND Permission.PartyId = #Groups.PartyIdAND Permission.PermissionTypeId = PermissionType.PermissionTypeId
IF @PortalPermissionValue = 0BEGIN RAISERROR (60002, 16, 1) return -3END
View 3 Replies
View Related
Aug 24, 2006
I am having trouble executing a stored procedure on a remote server. On my
local server, I have a linked server setup as follows:
Server1.abcd.myserver.comSQLServer2005,1563
This works fine on my local server:
Select * From [Server1.abcd.myserver.comSQLServer2005,1563].DatabaseName.dbo.TableName
This does not work (Attempting to execute a remote stored proc named 'Data_Add':
Exec [Server1.abcd.myserver.comSQLServer2005,1563].DatabaseName.Data_Add 1,'Hello Moto'
When I attempt to run the above, I get the following error:
Could not locate entry in sysdatabases for database 'Server1.abcd.myserver.comSQLServer2005,1563'.
No entry found with that name. Make sure that the name is entered correctly.
Could anyone shed some light on what I need to do to get this to work?
Thanks - Amos.
View 3 Replies
View Related
Jun 15, 2006
Hi All,Quick question, I have always heard it best practice to check for exist, ifso, drop, then create the proc. I just wanted to know why that's a bestpractice. I am trying to put that theory in place at my work, but they areasking for a good reason to do this before actually implementing. All Icould think of was that so when you're creating a proc you won't get anerror if the procedure already exists, but doesn't it also have to do withCompilation and perhaps Execution. Does anyone have a good argument fordoing stored procs this way? All feedback is appreciated.TIA,~CK
View 3 Replies
View Related
Feb 23, 2007
I have an ASP that has been working fine for several months, but itsuddenly broke. I wonder if windows update has installed some securitypatch that is causing it.The problem is that I am calling a stored procedure via an ASP(classic, not .NET) , but nothing happens. The procedure doesn't work,and I don't get any error messages.I've tried dropping and re-creating the user and permissions, to noavail. If it was a permissions problem, there would be an errormessage. I trace the calls in Profiler, and it has no complaints. Thedatabase is getting the stored proc call.I finally got it to work again, but this is not a viable solution forour production environment:1. response.write the SQL call to the stored procedure from the ASPand copy the text to the clipboard.2. log in to QueryAnalyzer using the same user as used by the ASP.3. paste and run the SQL call to the stored proc in query analyzer.After I have done this, it not only works in Query Analyzer, but thenthe ASP works too. It continues to work, even after I reboot themachine. This is truly bizzare and has us stumped. My hunch is thatwindows update installed something that has created this issue, but Ihave not been able to track it down.
View 1 Replies
View Related
Aug 29, 2006
Hi,
I'm currently in the midst of writing my first sqlclr sproc.
In our normal T-SQL sprocs we use the following:
OBJECT_NAME(@@PROCID)
to get the name of the sproc. We later use the result of this as a parameter to a custom message when we use RAISERROR.
Question is, is there a way of doing the same from within a SQLCLR sproc? i.e. Can someone give me a bit of code that will return the name of the current sproc? (Obviously this is not the same as the name of the .Net class that implements my sproc).
Thanks in advance for any help that you can provide.
Regards
View 1 Replies
View Related
Dec 5, 2004
Anyone have code to convert a sql proc to a C# class?
Specifially something to create the columns returned from the proc.
Thanks.
View 2 Replies
View Related
Apr 20, 2004
Hi,
Can any one change this oracle proc. to SQL Server procedure.
Any help will be appreciated.
PROCEDURE CALC_PERC (DB_ID IN NUMBER, LAT_TYPE IN CHAR) IS
Tot_work_all number(12,2);
Bid_tot number(12,2);
Ewo number(12,2);
Overruns number(12,2);
Underruns number(12,2);
Contr_tot_all number(12,2);
sContractType ae_contract.contr_type%type;
BEGIN
select sum(nvl(tamt_ret_item,0) + nvl(tamt_paid_item,0))
into Tot_work_all
from valid_item
Where db_contract = db_id;
Select sum(Contq * Contr_Price) into Bid_tot
From Valid_item
Where nvl(New_Item,'N') <> 'Y'
and db_contract = db_id;
Select sum(Qtd * Contr_price) into Ewo
From Valid_item
Where nvl(New_item,'N') = 'Y'
and db_contract = db_id;
Select Sum((Qtd-Nvl(Projq,0))*Contr_Price) into Overruns
From Valid_item
Where Qtd > Nvl(Projq,0)
and db_contract = db_id
and nvl(New_Item,'N') = 'N';
IF LAT_type <> 'R' THEN
Select Sum((Nvl(Projq,0)-Contq) * Contr_Price) into Underruns
From Valid_item
Where Nvl(Projq,0) < Contq
and db_contract = db_id
and nvl(New_Item,'N') = 'N';
ELSE
Select Sum((Nvl(Qtd,0)-Contq) * Contr_Price) into Underruns
From Valid_item
Where Nvl(Qtd,0) < Contq
and db_contract = db_id
and nvl(New_Item,0) = 'N';
end if;
Contr_tot_all:= NVL(Bid_tot,0) +NVL(ewo,0) +NVL(overruns,0)
+NVL(underruns,0);
IF Contr_tot_all = 0 THEN
Select Contr_type into sContractType from ae_contract where db_contract = db_id;
IF sContractType = 'A' OR sContractType = 'T' THEN
--If the divisor is zero here, it's not an error.
update ae_contract set perc_compu = 0 where db_contract = db_id;
ELSE
--If the divisor is zero here, it would be an error
update ae_contract set perc_compu = 100 * tot_work_all/contr_tot_all where db_contract = db_id;
END IF;
Else
--Here we have a real number to calculate, so go ahead and do your stuff!
update ae_contract set perc_compu = 100 * tot_work_all/contr_tot_all where db_contract = db_id;
END IF;
END;
View 2 Replies
View Related
Feb 20, 2003
I have seen this done by viewing code done by a SQL expert and would like to learn this myself. Does anyone have any examples that might help.
I guess I should state my question to the forum !
Is there a way to call a stored proc from within another stored proc?
Thanks In Advance.
Tony
View 1 Replies
View Related
Jan 13, 2006
Hi all,
I have a stored procedure "uspX" that calls another stored procedure "uspY" and I need to retrieve the return value from uspY and use it within uspX. Does anyone know the syntax for this?
Thanks for your help!
Cat
View 5 Replies
View Related
Jan 20, 2004
Hi all
I have about 5 stored procedures that, among other things, execute exactly the same SELECT statement
Instead of copying the SELECT statement 5 times, I'd like each stored proc to call a single stored proc that executes the SELECT statement and returns the resultset to the calling stored proc
The SELECT statement in question retrieves a single row from a table containing 10 columns.
Is there a way for a stored proc to call another stored proc and gain access to the resultset of the called stored proc?
I know about stored proc return values and about output parameters, but I think I am looking for something different.
Thanks
View 14 Replies
View Related
Aug 30, 2007
I would like to know if the following is possible/permissible:
myCLRstoredproc (or some C# stored proc)
{
//call some T SQL stored procedure spSQL and get the result set here to work with
INSERT INTO #tmpCLR EXECUTE spSQL
}
spSQL
(
INSERT INTO #tmpABC EXECUTE spSQL2
)
spSQL2
(
// some other t-sql stored proc
)
Can we do that? I know that doing this in SQL server would throw (nested EXECUTE not allowed). I dont want to go re-writing the spSQL in C# again, I just want to get whatever spSQL returns and then work with the result set to do row-level computations, thereby avoiding to use cursors in spSQL.
View 2 Replies
View Related
Apr 10, 2008
I'd like to convert this vba code from access to run in sql 2000 and I'm a newbie to vba and am not sure how to do this. can I get the same functionality from an sp?
' Global SYSTEM Variables...
Global GBL_SystemName As String
Global GBL_CommonPath As String
Global GBL_WorkPath As String
Global GBL_DataUpdatePath As String
Global GBL_ArchivePath As String
Global GBL_LiveMarsPath As String
Global GBL_MARS_DSN_Name As String
Global GBL_MARS_DB_Server As String
Global GBL_MARS_DB_Name As String
Global GBL_RawData_DSN_Name As String
Global GBL_RawData_DB_Server As String
Global GBL_RawData_DB_Name As String
' Global CLIENT Variables...
Global GBL_ClientName As String
Global GBL_ClientAbbrev As String
Global GBL_MedisunEligibilityAge As Long
Global GBL_DoctorsManualEntryFlag As String
Global GBL_LastUpdateDate As Date
Global GBL_LastInvoiceGTEDate As Date
Global GBL_LastInvoiceLTEDate As Date
Global GBL_NewInvoiceGTEDate As Date
Global GBL_NewInvoiceLTEDate As Date
Public Function Get_Globals(G_name As String)
Select Case UCase(G_name)
Case UCase("SystemName")
Get_Globals = GBL_SystemName
Case UCase("ClientName")
Get_Globals = GBL_ClientName
Case UCase("ClientAbbrev")
Get_Globals = GBL_ClientAbbrev
Case UCase("MedisunEligibilityAge")
Get_Globals = GBL_MedisunEligibilityAge
Case UCase("LastUpdateDate")
Get_Globals = GBL_LastUpdateDate
Case UCase("LastInvoiceGTEDate")
Get_Globals = GBL_LastInvoiceGTEDate
Case UCase("LastInvoiceLTEDate")
Get_Globals = GBL_LastInvoiceLTEDate
Case UCase("NewInvoiceGTEDate")
Get_Globals = GBL_NewInvoiceGTEDate
Case UCase("NewInvoiceLTEDate")
Get_Globals = GBL_NewInvoiceLTEDate
Case UCase("WorkPath")
Get_Globals = GBL_WorkPath
Case UCase("DataUpdatePath")
Get_Globals = GBL_DataUpdatePath
Case UCase("ArchivePath")
Get_Globals = GBL_ArchivePath
Case UCase("LiveMarsPath")
Get_Globals = GBL_LiveMarsPath
Case UCase("CommonPath")
Get_Globals = GBL_CommonPath
Case UCase("MARS_DSN_Name")
Get_Globals = GBL_MARS_DSN_Name
Case UCase("MARS_DB_Server")
Get_Globals = GBL_MARS_DB_Server
Case UCase("MARS_DB_Name")
Get_Globals = GBL_MARS_DB_Name
Case UCase("RawData_DSN_Name")
Get_Globals = GBL_RawData_DSN_Name
Case UCase("RawData_DB_Server")
Get_Globals = GBL_RawData_DB_Server
Case UCase("RawData_DB_Name")
Get_Globals = GBL_RawData_DB_Name
Case UCase("DoctorsManualEntryFlag")
Get_Globals = GBL_DoctorsManualEntryFlag
End Select
End Function
Public Sub GetProperties(strPropertyTblName As String, Optional strClientCode As String)
' Create database connection and recordset...
Set con = Application.CurrentProject.Connection
Set rs = CreateObject("ADODB.Recordset")
strSQL = "select * from tln_" & strPropertyTblName & "Properties"
If UCase(Trim(strPropertyTblName)) = "CLIENT" Then
strSQL = strSQL & " where CPClientCode = '" & strClientCode & "'"
End If
rs.Open strSQL, con, 1 ' 1 = adOpenKeyset
If Not rs.EOF Then
Do While Not rs.EOF
Select Case UCase(Trim(rs("PropertyName")))
Case UCase("MARS_DSN_Name")
GBL_MARS_DSN_Name = rs("PropertyValue")
Case UCase("MARS_DB_Server")
GBL_MARS_DB_Server = rs("PropertyValue")
Case UCase("MARS_DB_Name")
GBL_MARS_DB_Name = rs("PropertyValue")
Case UCase("RawData_DSN_Name")
GBL_RawData_DSN_Name = rs("PropertyValue")
Case UCase("RawData_DB_Server")
GBL_RawData_DB_Server = rs("PropertyValue")
Case UCase("RawData_DB_Name")
GBL_RawData_DB_Name = rs("PropertyValue")
Case UCase("SystemName")
GBL_SystemName = rs("PropertyValue")
Case UCase("ClientName")
GBL_ClientName = rs("PropertyValue")
Case UCase("ClientAbbrev")
GBL_ClientAbbrev = rs("PropertyValue")
Case UCase("MedisunEligibilityAge")
GBL_MedisunEligibilityAge = rs("PropertyValue")
Case UCase("WorkPath")
GBL_WorkPath = rs("PropertyValue")
If Right(Trim(GBL_WorkPath), 1) <> "" Then
GBL_WorkPath = GBL_WorkPath & ""
End If
Case UCase("DataUpdatePath")
GBL_DataUpdatePath = rs("PropertyValue")
If Right(Trim(GBL_DataUpdatePath), 1) <> "" Then
GBL_DataUpdatePath = GBL_DataUpdatePath & ""
End If
Case UCase("ArchivePath")
GBL_ArchivePath = rs("PropertyValue")
If Right(Trim(GBL_ArchivePath), 1) <> "" Then
GBL_ArchivePath = GBL_ArchivePath & ""
End If
Case UCase("LiveMarsPath")
GBL_LiveMarsPath = rs("PropertyValue")
If Right(Trim(GBL_LiveMarsPath), 1) <> "" Then
GBL_LiveMarsPath = GBL_LiveMarsPath & ""
End If
Case UCase("CommonPath")
GBL_CommonPath = rs("PropertyValue")
If Right(Trim(GBL_CommonPath), 1) <> "" Then
GBL_CommonPath = GBL_CommonPath & ""
End If
Case UCase("DoctorsManualEntryFlag")
GBL_DoctorsManualEntryFlag = UCase(rs("PropertyValue"))
If Trim(GBL_DoctorsManualEntryFlag) = "" Then
GBL_DoctorsManualEntryFlag = "Y"
End If
Case Else
' Invalid property... do nothing...
End Select
rs.MoveNext
Loop
End If
rs.Close
Set rs = Nothing
Set con = Nothing
End Sub
View 13 Replies
View Related
Jun 24, 2008
Hello does anyone know how to convert this access code to sql. Also is there a program out there that will do it for you.
IIf([Ceridian]![UnionIndicator]="U" And [YearsService]>=3,[HealthBenefits]![medplan.Bi-WeeklyURBio-Rad]*26,[HealthBenefits]![medplan.Bi-WeeklyBio-Rad]*26) AS MedicalCostER, IIf([Ceridian]![UnionIndicator]="U" And [YearsService]>=3,[medplan]![Bi-WeeklyUREE]*26,[medplan]![Bi-WeeklyEE]*26) AS MEdicalCostEE
View 1 Replies
View Related
Jul 5, 2007
Hi, all
I've seach the threads before. a lot of discussion about C# to VSA.
So could anyone with experience on conversion from C# to SSIS/VSA give me a suggestion?
I 've C# code application which complete some ETL process. Now I need to convert all the ETL process to SSIS pacakge. the function of part of C# code is to get the result from stored procedure and then write the result to excel file, not row by row.
the C# code call Microsoft.Office.Interop.Excel as a object to write excel file.
But in VSA, I can't add Microsoft.Office.Interop.Excel as a reference so I can convert C# to VB.net regarding writing excel file.
So any solution about that?
any help will be appreciated.........
View 5 Replies
View Related
Jan 14, 2008
How do I convert for example, a value comming from C# app "TextboxGBDataDeleted" to int column GBdatadeleted? I have a RangeValidator on this textbox to accept only numbers. I don't want to write C# code. I woul prefer to do this is SQL. Thank you.
My SQL update statement:
INSERT INTO KPITbl
(Lead, WRM, PTDB, PAR, PM, RequestingLOB, LOB, StartLocation, FinishLocation, Description, ProjectType, ServerName, ServerType, DCOorSTANDALONE, Responsible,
Status, RAG, StartDates, EndDates, TreeOrDomainImpacted, NumOfSites, NumOfUsers, GBdatamoved, GBdatadeleted, NumOfSrvrsAdded,
NumOfSrvrsDecommed, NumOfAppsDeployed, EUTEngineeringConsult, Comments, TimeSpend, Complexity, ECM, LastUpdated)
VALUES (@Lead,@WRM,@PTDB,@PAR,@PM,@RequestingLOB,@LOB,@StartLocation,@FinishLocation,@Description,@ProjectType,@ServerName,@ServerType,@DCOorSTANDALONE,@Responsible,@Status,@RAG,@StartDates,@EndDates,@TreeOrDomainImpacted,@NumOfSites,@NumOfUsers,@GBdatamoved,@GBdatadeleted,@NumOfSrvrsAdded,@NumOfSrvrsDecommed,@NumOfAppsDeployed,@EUTEngineeringConsult,@Comments,@TimeSpend,@Complexity,@ECM,(getdate() ) )
~~~~~~~~~~~~~~~~~~~~~~MY TABLE~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CREATE TABLE [dbo].[KPITbl](
[TaskID] [int] IDENTITY(1,1) NOT NULL,
[Lead] [nvarchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[WRM] [nvarchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[PTDB] [nvarchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[PAR] [nvarchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[PM] [nvarchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[RequestingLOB] [nvarchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[LOB] [nvarchar](max) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[StartLocation] [nvarchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[FinishLocation] [nvarchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[Description] [nvarchar](max) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[ProjectType] [nvarchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[ServerName] [nvarchar](max) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[ServerType] [nvarchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[Responsible] [nvarchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[Status] [nvarchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[RAG] [nvarchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[StartDates] [smalldatetime] NULL,
[EndDates] [smalldatetime] NULL,
[TreeorDomainImpacted] [nvarchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[NumOfSites] [int] NULL,
[NumOfUsers] [int] NULL,
[GBdatamoved] [int] NULL,
[GBdatadeleted] [int] NULL,
[NumOfSrvrsAdded] [int] NULL,
[NumOfSrvrsDecommed] [int] NULL,
[NumOfAppsDeployed] [int] NULL,
[EUTEngineeringConsult] [nvarchar](max) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[Comments] [nvarchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[TimeSpend] [nvarchar](50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[Complexity] [nvarchar](50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[LastUpdated] [smalldatetime] NULL,
[DCOorSTANDALONE] [nvarchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[ECM] [nvarchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[StatusCompletedDate] [smalldatetime] NULL,
[StatusCancelledDate] [smalldatetime] NULL,
CONSTRAINT [PK_Sheet1a] PRIMARY KEY CLUSTERED
(
[TaskID] ASC
)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY]
View 4 Replies
View Related
Feb 24, 2008
Hello,
I'm using ASP.Net to update a table which include a lot of fields may be around 30 fields, I used stored procedure to update these fields. Unfortunatily I had to use a FormView to handle some TextBoxes and RadioButtonLists which are about 30 web controls.
I 've built and tested my stored procedure, and it worked successfully thru the SQL Builder.The problem I faced that I have to define the variable in the stored procedure and define it again the code behind againALTER PROCEDURE dbo.UpdateItems
(
@eName nvarchar, @ePRN nvarchar, @cID nvarchar, @eCC nvarchar,@sDate nvarchar,@eLOC nvarchar, @eTEL nvarchar, @ePhone nvarchar,
@eMobile nvarchar, @q1 bit, @inMDDmn nvarchar, @inMDDyr nvarchar, @inMDDRetIns nvarchar,
@outMDDmn nvarchar, @outMDDyr nvarchar, @outMDDRetIns nvarchar, @insNo nvarchar,@q2 bit, @qper2 nvarchar, @qplc2 nvarchar, @q3 bit, @qper3 nvarchar, @qplc3 nvarchar,
@q4 bit, @qper4 nvarchar, @pic1 nvarchar, @pic2 nvarchar, @pic3 nvarchar, @esigdt nvarchar, @CCHName nvarchar, @CCHTitle nvarchar, @CCHsigdt nvarchar, @username nvarchar,
@levent nvarchar, @eventdate nvarchar, @eventtime nvarchar
)
AS
UPDATE iTrnsSET eName = @eName, cID = @cID, eCC = @eCC, sDate = @sDate, eLOC = @eLOC, eTel = @eTEL, ePhone = @ePhone, eMobile = @eMobile,
q1 = @q1, inMDDmn = @inMDDmn, inMDDyr = @inMDDyr, inMDDRetIns = @inMDDRetIns, outMDDmn = @outMDDmn,
outMDDyr = @outMDDyr, outMDDRetIns = @outMDDRetIns, insNo = @insNo, q2 = @q2, qper2 = @qper2, qplc2 = @qplc2, q3 = @q3, qper3 = @qper3,
qplc3 = @qplc3, q4 = @q4, qper4 = @qper4, pic1 = @pic1, pic2 = @pic2, pic3 = @pic3, esigdt = @esigdt, CCHName = @CCHName,
CCHTitle = @CCHTitle, CCHsigdt = @CCHsigdt, username = @username, levent = @levent, eventdate = @eventdate, eventtime = @eventtime
WHERE (ePRN = @ePRN)
and the code behind which i have to write will be something like thiscmd.CommandType = CommandType.StoredProcedure;
cmd.Parameters.AddWithValue("@eName", ((TextBox)FormView1.FindControl("TextBox1")).Text);cmd.Parameters.AddWithValue("@ePRN", ((TextBox)FormView1.FindControl("TextBox2")).Text);
cmd.Parameters.AddWithValue("@cID", ((TextBox)FormView1.FindControl("TextBox3")).Text);cmd.Parameters.AddWithValue("@eCC", ((TextBox)FormView1.FindControl("TextBox4")).Text);
((TextBox)FormView1.FindControl("TextBox7")).Text = ((TextBox)FormView1.FindControl("TextBox7")).Text + ((TextBox)FormView1.FindControl("TextBox6")).Text + ((TextBox)FormView1.FindControl("TextBox5")).Text;cmd.Parameters.AddWithValue("@sDate", ((TextBox)FormView1.FindControl("TextBox7")).Text);
cmd.Parameters.AddWithValue("@eLOC", ((TextBox)FormView1.FindControl("TextBox8")).Text);cmd.Parameters.AddWithValue("@eTel", ((TextBox)FormView1.FindControl("TextBox9")).Text);
cmd.Parameters.AddWithValue("@ePhone", ((TextBox)FormView1.FindControl("TextBox10")).Text);
cmd.Parameters.AddWithValue("@eMobile", ((TextBox)FormView1.FindControl("TextBox11")).Text);
So is there any way to do it better than this way ??
Thank you
View 2 Replies
View Related
Dec 21, 2000
i had worked on oracle 8i and i am planning to work on sql server 2000,i am requested by a company to help in converting there pl/sql code of oracle 8.0 to something equivalent which works on sql server 7.0 as they want to have similar code on both..i had not worked on sql server 7.0 ,but as pl/sql code works only on oracle stuff..so could kindly anyone guide me in this as to whether there is any product which coverts pl/code (the existing pl/code runs into thousands of line) automatically..i will be very grateful if anyone can enlighten me with such a product(software) or script.. along with its information and site address..any resources and any guidance as to how to go about about this conversion will be very invaluable..hope to hear soon from you guys...early response....will be appreciated..
with regards,
vijay.
sql server 7.0 on winnt
pl/sql code on oracle 8.0
View 2 Replies
View Related
Aug 8, 2006
Hello,
How do I convert VBSCRIPT code in a DTS package which is used for data validation to SQL 2005 SSIS?
Thanks,
Michael
View 2 Replies
View Related
Jul 29, 2015
This is a string i am getting from sql server.
00000006637120150522187449637100 34
10-000000003444378351108502007
01016800002413
10-000000091541378538466562009
01016800002420
[Code] .....
View 9 Replies
View Related
Oct 14, 2007
I am calling a stored procedure (say X) and from that stored procedure (i mean X) i want to call another stored procedure (say Y)asynchoronoulsy. Once stored procedure X is completed then i want to return execution to main program. In background, Stored procedure Y will contiue his work. Please let me know how to do that using SQL Server 2000 and ASP.NET 2.
View 3 Replies
View Related
Oct 26, 2007
I am having a problem while converting datetime to varchar with code 106. Here is the code and result I get:
TSQL Code:
SELECT CONVERT(VARCHAR(100), GETDATE(), 106)
Result:
"26 10 2007"
My expected result:
"26 Oct 2007" or "26 October 2007"
Have you encountered this problem before? Is it related to the SQL server setting? Please help and thank you in advance.
View 6 Replies
View Related
