Hi,
I have DB2 date value 00000000. If I'm exporting to SQL server using openquery that is automaticaly converting to char of 8 and stored as the same value 00000000.
My question is how I can convert them as datetime value in SQL server 2000.?
Hi,I have a text file that contains a date column. The text file will beimported to database in SQL 2000 server. After to be imported, I wantto convert the date column to date type.For ex. the text file look likeName dateSmith 20003112Jennifer 19991506It would be converted date column to ydm database in SQL 2000 server.In the table it should look like thisName DateSmith 2000.31.12Jennifer 1999.15.06Thanks in advance- Loi -
View 1 Replies View RelatedHave a requirement to:
Convert char(7) YYYY-MM variable (eg. '2001-07') to both:
datetime '2001-07-01 00:00:00.000' and
datetime '2001-07-01 23:59:59.997'
thx in advance!
I'm trying to convert a char(24) column to the datetime format. This is my query:
select CONVERT(datetime, [Date], 121) from Table
The date in the char(24) column has this format: 2007-12-14 14:45:31.735
When executing this statemant it says it cannot convert this char to datetime. But when I execute this statement, it works:
select CONVERT(datetime, '2007-12-14 14:45:31.735', 121) from Table
What am I doing wrong?
Database is SQL Server 2000
I have a field in a table that stores date of birth. The field's datatype is char(6) and looks like this: 091703 (mmddyy). I want to convert this value to a datetime datatype.
What is the syntax to convert char(6) to datetime?
Thank you in advance.
I'm looking through some data in a third party application, trying to figure something out for a report. There is a char(1) column holding control characters that apparently effects the status of certain records, and whether they should appear on the report. I want to look at the integer value of those characters rather than the character representation, but I can't get it to work. I keep getting "Error converting data type varchar to numeric." I'm trying to do something like this:
Code:
SELECT CONVERT(int, MyColumn) As IntValue FROM MyTable
I've tried every combination of cast and convert I can think of, as well as numeric data types other than int. There aren't that many distinct values, so I'm just going to do this manually, but I still want to know why it won't work, or what I'm doing wrong. Any thoughts?
I have a Column called PostNr which is of type Char(4)
I want to be able to Convert it to int
How can I accomplish that in query analyser, I tried changing it in Ent Manager, it keeps timing out.
I data in Post is in this format, does not contain illegal character just number
Hi all,I have a column LateHours (Varchar). I want to put it in another table which has Latehours column in Decimal(4,2) Example = +04:33 Should be 4.33 (Only + values) Char to Decimal (4,2) Please Help me,Thanks,Janaka
View 3 Replies View RelatedHi all,
There are several columns called enabled with a char datatype in my database. One enabled column per table. These columns either have a value of T or F (true or false), depending on whether they're enabled or not. I want to change these columns to a bit datatype and insert the relevant value of true or false...
I guess the best way to do this is to add a new column to a table with a bit datatype, and based on the value in the current enabled column, insert TRUE or FALSE.
Anyone ideas on the best way to accomplish this?
Thanks.
I am trying to convert Varbinary to Char it keeps returning this ...
--------------------------------------------------
´å
(1 row(s) affected)
Here is the code that I am using....
declare @name varbinary(50)
set @name =0x12b4e5
SELECT Convert(char(50),@name)
Can someone please help! ~Dana
hi, how can I convert a float to a char so I can do:
'£' + convert(char,amount) AS [money]
When I do the above the number is like 1.07848e+006
rather than 1078480
thans for any help.
jamie
if i use the query
SELECT iditem, CONVERT(char(20), dt, 105) FROM planeamento
it works just fine.. but in this case the dt (date) field is not recognised..
SELECT planeamento.iditem, idmodelo, item_planeamento.idproduto, item_planeamento.idpele, cor, ordemfabrico, qtd, CONVERT(char(20), dt, 105) FROM produto INNER JOIN item_planeamento ON produto.idproduto = item_planeamento.idproduto INNER JOIN planeamento ON item_planeamento.iditem = planeamento.iditem WHERE planeamento.idfabrica = 51 AND alterado = 'FALSE' AND estado = NULL GROUP BY planeamento.iditem, produto.idModelo, item_planeamento.idProduto, item_planeamento.idPele, item_planeamento.cor, item_planeamento.ordemFabrico, item_planeamento.qtd, planeamento.dt
before, id just had "id" where "CONVERT(char(20), dt, 105)" is, but the date was printed in a unwanted format..
can you help me?
thanks a lot!
declare @new table(
id int not null identity(1,1),
dat char(10))
insert into @new
select'111214'
union
select'121214'
select cast(dat as datetime)from @new
-----------------------
2011-12-14 00:00:00.000
2012-12-14 00:00:00.000
but me need results it
2014-12-11
2014-12-12
Select Cast('100.1234' as float)give me the result 100.1234Now when I convert it back to char I want exactly 100.1234Select Convert(char(100),Cast('100.1234' as float))Gives me 100.123 (Here I was expecting 100.1234)When I doSelect STR(Cast('100.1234' as float),25,4)I get back the result as 100.1234However here I am not sure how many digits do I have after the decimalpoint. If I put some value likeSelect STR(Cast('100.1234' as float),25,8)I get 0's appended to it, which is again not desired.Thanks in advance,Jai
View 4 Replies View Related
We have the same database in three different environment. The statement below works just fine in two database environment, but I am getting the error in the third one. All the databases are Microsoft SQL Server 2005. I could not pine point the source of the issue. Please any input that you might be able to provide. Thanks
The issue in simplest from
DECLARE @UDF_Value nvarchar(255)
set @UDF_Value = 111
SELECT CONVERT(money, @UDF_Value)
Msg 235, Level 16, State 0, Line 1
Cannot convert a char value to money. The char value has incorrect syntax.
I've been trying to solve this problem or just find an alternative to do this. I have filled a temp table with certain values for all columns except those columns that rely on calculations that need certain cell values from other columns in the temp table. I have a while statement that runs through each cell for one calculation column and this is the code that updates the fields on the calc column:
Code Block
EXEC('UPDATE #tblTemp
SET #tblTemp.['+@CalcColumns+'] = (CAST(ISNULL((SELECT #tblTemp.['+@Column1+']
FROM #tblTemp
WHERE #tblTemp.PK = '''+@PubKey+'''), 0.00)as money) - CAST(ISNULL((SELECT #tblTemp.['+@Column2+']
FROM #tblTemp
WHERE #tblTemp.PK = '''+@PubKey+''') , 0.00)as money))
WHERE #tblTemp.PK = '''+@PubKey+'''')
The problem is that it will not let me convert the two values to money. The error is:
Msg 235, Level 16, State 0, Line 1
Cannot convert a char value to money. The char value has incorrect syntax.
This is necessary to calculate the difference between these two cells from the temp table. I would appreciate any help! Thanks!
Hello,
I have made a slight error in my SQL2000 database and have found this out with 10000 plus records under my belt.
I have a field called Char with entries 12mid and 12noon. I need to convert these to Datetime. All records convert OK except these two.
I am using DTS to transfer records form old table to new table. How do I write a procedure (or something) to enable conversion of the records 12mid and 12noon to 12am and 12pm.
Thanks
Goong
Everytime I run a simple convert statement, from char to datetime, it works but when I use the `Select Convert(datetime, BeginDate)` in an insert statement it complains with a syntax error on the conversion from char to datetime. E.g.
Insert Into AlaskaData2( CurrIssueDate, InactivationDate)
select Convert (Datetime, CurrIssueDate) CurrIssueDate,
Convert(Datetime, InactivationDate) InactivationDate
from Alaskadata1
go
Hi all,
I need to convert a char (a) to datetime in the following query:
select *
from table1
where convert (a, datetime) > '01/31/2007'
this query does not work :(
Hi all,Would anyone know a way to convert a char(10) in format 'm/d/yyyy' to'mm/dd/yyyy', so I can convert the column to datetime format.Thanks
View 1 Replies View Relatedi have another problem.and it's now on converting a char(4) to datetimehere is the situationJ_TIM < F_TIMJ_TIM is datetime while F_TIM is char of 4exampleJ_TIM = 20:30F_TIM = 2030how can i convert F_TIM to datetime so that i can compare them.???thanks
View 3 Replies View RelatedI have a Database which is having a Counterdate time Column stored in the form of Char(24)
But i need it to be in form of datetime so that i can use the datetime functions on it..When i use the cast or convert inside the function where i am passing this character it gives me error
"Conversion failed when converting datetime from character string."
I am done all permutatiions and combinations for this used
Set @DE = convert ( datetime, @ts,121)
Set @de = cast( @ts as datetime)
BUT ALWZ give me same error.... also when i copy the whole of the data table into some other database the error doesnt come.. i converts the character into the datetime..
I DONT understand why the Server is behaving wiered..
Hoping to get an answer soon.
With regards
Sharad
Database Developer ,
UIC
I am inserting date and time data into a SQL Server 2012 Express table from an application. The application is providing the date and time as a string data type. Is there a TSQL way to convert the date and time string to an SQL datetime date type? I want to do the conversion, because SQL displays an error due to the
My date and time string from the application looks like : 3/11/2014 12:57:57 PM
Hi,
I am extracting data from DB2 into SQL server using DTS. We have the data type char(5) in DB2 and int in SQL server.
I tried to give the
select integer(columname) as columname from tablename in data source.
I did parse the query it was Ok but If I tried to execute that giving the following error.
Can you give me your answere for this issue.
---------------------------
Package Error
---------------------------
Error Source : Microsoft OLE DB Provider for ODBC Drivers
Error Description : [StarQuest][StarSQL ODBC Driver][DB2]THE VALUE OF A CHARACTER STRING ARGUMENT WAS NOT ACCEPTABLE TO THE INTEGER FUNCTION
---------------------------
OK
---------------------------
Using SQL 2000 I have data in a sql table that is store in varchar like below
5.00
15.00
9.00
The integer part will never be bigger than 20. I need to move it to another SQL table that is char(5). I need the results that go in that table to like like below
05.00
15.00
09.00
I looked at the replace and cast but couldn't get the results. Any better approaches?
Thanks
What is the easiest way to convert '3/21/1959' to '19590321' I looked at
the CAST and convert and can't come up with a solution.
Thanks
Hello,
Is there a way to convert varchar or char to float?
Thank you
Hi,
I read the topic from JROdden and this case is similiar but...
I got several varchar fields with
values like
1.2
1.3
... these I can covert with
select CONVERT(dec(5,2), fieldname) as fieldname
In fact I also solved undefined- and NULL-values with.
CONVERT(decimal(12, 2), CASE WHEN GESCHKOSTMAX IS NULL OR
GESCHKOSTMAX < '0' THEN '0' ELSE GESCHKOSTMAX END) as GESCHKOSTMAX,
But now there are values like
1,4 and these ones neither CONVERT nor CAST will handle.
I tried the
SELECT DISTINCT KMPAUSCHALE
FROM extr_INTFIRMA
WHERE (isnumeric(KMPAUSCHALE) = 1)
and get
0,40
0.25
0.30 and so on...
The error is:
[Microsoft][ODBC SQL Driver][SQL Server]Error converting datatype varchar to decimal. (or float or numeric (whatever I tried))
I think the easiest way would be to insist on higher data quality but
I also would like to solve this interesting challenge.
Thanks for any hints
By the way, I followed rudys link to
http://rudy.ca/afdb.html
and now I know how I could protect myself !!!!
There must be a voice in my head saying:
Try the db-forum, try it and stay happy... ;-)
best regards and have fun with new year eve.
Michael
I have to store the result of a calculation in a column of type CHAR(7) (and am unable to change the column type).
The calculation can have results ranging in size from 0.1234567 to 99999999.
In the first case, I would need to store the value of 0.12345 in the column. In the later case, an error should be thrown.
So I need to store all of the significant digits from the left of the decimal (if there are < 7) and as many of the digits to the right as will fit into a CHAR(7), with the remaining precision being truncated.
I have imported some data to sql2k from my old system. Somehow, it importedinvoice amount to char type.I just created another column called invamt2 type NUMERIC so I can copy orconvert content of invamt which is type CHAR. There are about 50,000records.How can I convert/cast from char type to numeric type ?Thanks
View 2 Replies View RelatedI can't seem to find a method of converting a CHAR(8) column in the form ofYYYYMMDD to an actual date such as mm/dd/yyyyCan anyone point me in the right direction?Thanks
View 17 Replies View RelatedHi,
i want to perform the following conversion to yyyy-mm-dd hh:mm: ss SMALLDATETIME format :
print convert( smalldatetime,'2008-02-14 10:16:00', 120)
But i get the error and the wrong conversion format:
Feb 14 2008 10:16AM
Msg 296, Level 16, State 3, Procedure TSU_CalcTempoRespostaPercInterv, Line 43
The conversion of char data type to smalldatetime data type resulted in an out-of-range smalldatetime value.
Any way to achieve this ?! i'm tearing my hear off with this issue #"#"#$"#"$#$"
Hi ,
I am trying to convert a char field of lenght 5 into numeric (5,2) 999.99 format ,
i am getting an arithmentic overflow error.
The Character Data is 5 in length
It works fine if the Data is 00000
it fails if there is any number in the data
Like 10000
or 05000
How do i represent these into Numeric (5,2)
please let me know what taransformation to use and how.
Thanks,