I have a table in which has 1300 rows and a colum has 800 unique values,100 twice repeated values and 100 3times repeated values.
now i have added a new column which would have 1's and 0's
1 for each unique entery and 0 for every second or 3rd entery
so that when i sum it up it should give 1000 -- SUM(column)=1000
Hi Guys, I cannot seem to get the syntax right on this one. I am trying to Update a field in a table with the recount of another table. Is it even possible to do this???
Update P_Dates SET RecCount = RecCnt
FROM
(SELECT Count(ACCTNO) As RecCnt
FROM IMPORT
Where @sDate = StartDate AND @eDate = EndDate)
any ideas?
Thanx,
Trudye
Hi,
I am trying to update a field in a temptable with the count of items in another table. To illustrate, CustomerID=23 and I want the number of occurences in the temp table. Here's the code which DOESN'T work:
INSERT INTO TempTable
(
CustomerID,
FirstName,
LastName,
DateAdded,
AlbumPicture,
LayoutCount
)
SELECT
Albums.CustomerID,
Customers.FirstName,
Customers.LastName,
DateAdded,
AlbumPicture,
COUNT(*) FROM Layouts WHERE Layout.customerID = Albums.CustomerID
FROM
Albums JOIN
Customers on (Albums.CustomerID=Customers.CustomerID)
Please take a look at the COUNT line. Here I want to count the occurences of a specific customerid in another table and put in into th LayoutCount field.
SQL server reports "Incorrect syntax near the keyword 'FROM'". Any ideas how to achieve this?
Many thanks!!
Eric
Hello All.
I need your advise on this .....
I have a table with Bill_Doc, Bill_Item and Bill_Doc_Count fields. I need to update Bill_Doc_Count with 1 only on the first Bill_Item. Is this possible? I tried min and max but they don't work for me.
Please help. Thanks a million.
For example,
Bill_Doc Bill_Item Bill_Doc_Count
123 1 1
123 2 Null
123 3 Null
124 1 1
125 1 1
125 2 Null
Best regards
Hi I have added a new column to my table, i need to run a query and update this colmn with a count, so like
i = 1
loop
update table
set column = i
where column = 113
i=i+1
loop
just not sure what the sql syntax is?
Field Names: NOs Code Code1a UniqueID61 10 888 1062 10 888 1163 10 888 12Logic: If Count(code >1) & Count (Code1a >1)Update the (Nos) to EQUAL the same Value.ALL the Nos for the above examble should be the same value forall three records whether it's 61 for all three records of anyof the other two numbers, it doesn't matter as long as the equal the same value.How can this be done via sql?
View 5 Replies View RelatedHi is there away of doing both my select and update of a field in my database (m not using store procedures)
Basically all I need to do is get the value of DownloadTimes then add 1 and re update it.
Also to stop missing increments what the best way to lock the database while an update is in progress?
This is basically firing after a user clicks a file to download. I bring up the dialogue for them to save it is it possible to get which button they press and what is the best way to deliver it to them eg response.writeFile()??
Thanks sorry about all questions.
I am importing a text file that list invoice columns. The invoice detail table needs the line items to be listed with sequential numbers. I import the file to a temp table to do the work in and I know I need to have the cursor do loop through and count, however, I have no more hair to pull out.
The table looks something like this.
inv# SKU
1001 ABC123
1001 DEF456
1001 GHI789
1002 123DEF
1002 456GHI
1002 876HGT
I need the cursor to go through and number each line, something like this.
inv# SKU Line#
1001 ABC123 1
1001 DEF456 2
1001 GHI789 3
1002 123DEF 1
1002 456GHI 2
1002 876HGT 3
Any help is greatly appriciated.
Thanks
I have added some SQL to an Access form which updates the dbo_BM_Map table when the user hits the Apply button. There is a temp table with various fields, two being "Chapter_No" and "Initial_Mapping_Complete" which the update is based on.
I want this update to only apply to chapters that only have one name in the "Initial_Mapping_Complete" column. If a chapter has more than one then the update should ignore it. The attached screengrab shows you. The update should ignore chapter 19 as there are two people (Jim and James) in the Initial_Mapping_Complete field. Here is my code.
pdate dbo_BM_Map inner Join Temp_Progression_Populate
on dbo_BM_Map.Product_ID = Temp_Progression_Populate.Product_ID
Set dbo_BM_Map.Initial_Mapping_Complete = Temp_Progression_Populate.Initial_Mapping_Complete
Where dbo_BM_Map.Chapter_No = Temp_Progression_Populate.Chapter_No
And Temp_Progression_Populate.Initial_Mapping_Complete in
(Select count(Initial_Mapping_Complete), Chapter_No
from Temp_Progression_Populate
Group by Chapter_No
Having Count(Initial_Mapping_Complete) = 1)
Hello again,
I'm hoping someone can help with with a task I've been given. I need to write a trigger which will act effectively as a method of automatically distributing of incoming call ticket records. See DDL below for creation of the Assignment table, which holds information on the call ticket workload.
Code Snippet
CREATE TABLE #Assignment
(CallID INT IDENTITY(1500,1) PRIMARY KEY,
AssignmentGroup VARCHAR(25),
Assignee VARCHAR(25)
)
GO
INSERT #Assignment (AssignmentGroup, Assignee)
VALUES ('Service Desk', 'Jim Smith')
INSERT #Assignment (AssignmentGroup, Assignee)
VALUES ('PC Support', 'Donald Duck')
INSERT #Assignment (AssignmentGroup, Assignee)
VALUES ('Service Desk', 'Joe Bloggs')
INSERT #Assignment (AssignmentGroup, Assignee)
VALUES ('Service Desk', 'Joe Bloggs')
INSERT #Assignment (AssignmentGroup, Assignee)
VALUES ('Service Desk', 'Joe Bloggs')
INSERT #Assignment (AssignmentGroup, Assignee)
VALUES ('PC Support', 'Donald Duck')
INSERT #Assignment (AssignmentGroup, Assignee)
VALUES ('PC Support', 'Mickey Mouse')
GO
SELECT COUNT(CallID) AS [Total Calls], AssignmentGroup, Assignee
FROM #Assignment
GROUP BY AssignmentGroup, Assignee
ORDER BY COUNT(CallID) DESC , AssignmentGroup, Assignee
What I need to do is write a trigger for on INSERT to automatically update the Assignee column with the name of the person who currently has the least active calls. For example, using the data above, the next PC Support call will go to Mickey Mouse, and the next two Service Desk calls will go to Jim Smith.
So, the logic for the trigger would be
UPDATE #Assignment
SET Assignee = (SELECT Assignee FROM #Assignment WHERE COUNT(CallID) = MIN(COUNT(CallID))
But that's only the logic, and obviously it doesn't work with the syntax being nothing like correct.
Does any one have an idea or pointers as to how I should go about this?
Grateful for any advice, thanks
matt
updating the # of Payer from below query to match with the # of rows for each payer record. See the Current and desired results below. The query is currently counting the # of rows for all payers together and updating 3 as # of payers. I need it to count # of rows for each payer like shown inDesired result below. It should be showing 1 for first payer and 2 for 2nd & 3rd based on # of times each payer is repeated..
SELECT b.FILING_IND, b.PYR_CD, b. PAYER_ID, b. PAYER_NAME,a.CLAIM_ICN,
(Select Count(*) From MMITCGTD.MMIT_CLAIM a, MMITCGTD.MMIT_TPL b , MMITCGTD.MMIT_ATTACHMENT_LINK c where a.CLAIM_ICN_NU =
c.CLAIM_ICN and b.TPL_TS = c.TPL_TS and a.CLAIM_TYPE_CD = 'X'Â
[Code] ....
Current Result
FILING_IND
PYR_CD
PAYER_ID
PAYER_NAME
CLAIM_ICN
#_OF_PAYER
[code]....
I want to update a field and in this field insert a increment count, for example:
When I make, "Select * from Users order by User" displays:
User1 Â | Â NULL
User1 Â | Â NULL
User1 Â | Â NULL
User2 Â | Â NULL
User2 Â | Â NULL
and I want to do this:
User1 Â | Â 1
User1 Â | Â 2
User1 Â | Â 3
User2 Â | Â 1
User2 Â | Â 2
how to do this?
I want to create a trigger that, when a field is updated or a record is inserted, counts the number of words in "field1", inserting this numeric value into another field in the same table. What would be the most efficient, fastest method for doing this?
View 15 Replies View RelatedI need to update the result depending upon the count of distinct entries.
Example
ID Employee Region State
1 ABC AMEA MI
2 DEF AMEA MI
3 XYZ APAC TX
I want the result as below
ID Employee Region State
1 ABC AMEA MI-1
2 DEF AMEA MI-2
3 XYZ APAC TX
since the count of Region is 2
I tried using DECLARE @intFlag INT and stuff but wasn't able to get the solution.
We have an application that runs Jobs, each of which affect ## number of child objects (usually around 1M). When a thread gets to 5000 updated child objects it bulk inserts into a table called ActionLog with the child Id and JobId.
When the job is complete a sproc SUMs the children from the ActionLog table:
select sum(id) from ACTIONLOG where JOBID = @JobId;
It then updates the Jobs table AffectedObjectCount column with the sum(*) from above.
Instead of writing to the ActionLog table and calculating the SUM at the end I would like to do this 'real time'. After the bulk insert I would like to update the AffectedObjectCount column with the number of rows that were just bulk inserted. I tried this in the past and ran into major contention issues. There are usually 20 threads running a job so there exists a lot of potential for deadlocks.
Is there a recommended way to handle updating one column on one row from multiple threads? What is the best practice for a counter like this?
With the function below, I receive this error:Error:Transaction count after EXECUTE indicates that a COMMIT or ROLLBACK TRANSACTION statement is missing. Previous count = 1, current count = 0.Function:Public Shared Function DeleteMesssages(ByVal UserID As String, ByVal MessageIDs As List(Of String)) As Boolean Dim bSuccess As Boolean Dim MyConnection As SqlConnection = GetConnection() Dim cmd As New SqlCommand("", MyConnection) Dim i As Integer Dim fBeginTransCalled As Boolean = False
'messagetype 1 =internal messages Try ' ' Start transaction ' MyConnection.Open() cmd.CommandText = "BEGIN TRANSACTION" cmd.ExecuteNonQuery() fBeginTransCalled = True Dim obj As Object For i = 0 To MessageIDs.Count - 1 bSuccess = False 'delete userid-message reference cmd.CommandText = "DELETE FROM tblUsersAndMessages WHERE MessageID=@MessageID AND UserID=@UserID" cmd.Parameters.Add(New SqlParameter("@UserID", UserID)) cmd.Parameters.Add(New SqlParameter("@MessageID", MessageIDs(i).ToString)) cmd.ExecuteNonQuery() 'then delete the message itself if no other user has a reference cmd.CommandText = "SELECT COUNT(*) FROM tblUsersAndMessages WHERE MessageID=@MessageID1" cmd.Parameters.Add(New SqlParameter("@MessageID1", MessageIDs(i).ToString)) obj = cmd.ExecuteScalar If ((Not (obj) Is Nothing) _ AndAlso ((TypeOf (obj) Is Integer) _ AndAlso (CType(obj, Integer) > 0))) Then 'more references exist so do not delete message Else 'this is the only reference to the message so delete it permanently cmd.CommandText = "DELETE FROM tblMessages WHERE MessageID=@MessageID2" cmd.Parameters.Add(New SqlParameter("@MessageID2", MessageIDs(i).ToString)) cmd.ExecuteNonQuery() End If Next i
' ' End transaction ' cmd.CommandText = "COMMIT TRANSACTION" cmd.ExecuteNonQuery() bSuccess = True fBeginTransCalled = False Catch ex As Exception 'LOG ERROR GlobalFunctions.ReportError("MessageDAL:DeleteMessages", ex.Message) Finally If fBeginTransCalled Then Try cmd = New SqlCommand("ROLLBACK TRANSACTION", MyConnection) cmd.ExecuteNonQuery() Catch e As System.Exception End Try End If MyConnection.Close() End Try Return bSuccess End Function
below data,
Countery
parentid
CustomerSkId
sales
A
29097
29097
10
A
29465
29465
30
A
30492
30492
40
[code]....
Â
Output
Countery
parentCount
A
8
B
3
c
3
in my count function,my code look like,
 set buyerset as exists(dimcustomer.leval02.allmembers,custoertypeisRetailers,"Sales")
set saleset(buyerset)
set custdimensionfilter as {custdimensionmemb1,custdimensionmemb2,custdimensionmemb3,custdimensionmemb4}
set finalset as exists(salest,custdimensionfilter,"Sales")
Set ProdIP as dimproduct.dimproduct.prod1
set Othersset as (cyears,ProdIP)
(exists(([FINALSET],Othersset,dimension2.dimension2.item3),[DimCustomerBuyer].[ParentPostalCode].currentmember, "factsales")).count
it will take 12 to 15 min to execute.
I am trying to get count on a varchar field, but it is not giving me distinct count. How can I do that? This is what I have....
Select Distinct
sum(isnull(cast([Total Count] as float),0))
from T_Status_Report
where Type = 'LastMonth' and OrderVal = '1'
I use SQL 2000
I have a Column named Bool , the value in this Column is 0�0�1�1�1
I no I can use Count() to count this column ,the result would be "5"
but what I need is "2" and "3" and then I will show "2" and "3" in my DataGrid
as the True is 2 and False is 3
the Query will have some limited by a Where Query.. but first i need to know .. how to have 2 result count
could it be done by Count()? please help.
thank you very much
SQL 2000I have a table with 5,100,000 rows.The table has three indices.The PK is a clustered index and has 5,000,000 rows - no otherconstraints.The second index has a unique constraint and has 4,950,000 rows.The third index has no constraints and has 4,950,000 rows.Why the row count difference ?Thanks,Me.
View 5 Replies View RelatedThe following query returns a value of 0 for the unit percent when I do a count/subquery count. Is there a way to get the percent count using a subquery? Another section of the query using the sum() works.
Here is a test code snippet:
--Test Count/Count subquery
declare @Date datetime
set @date = '8/15/2007'
select
-- count returns unit data
Count(substring(m.PTNumber,3,3)) as PTCnt,
-- count returns total for all units
(select Count(substring(m1.PTNumber,3,3))
from tblVGD1_Master m1
left join tblVGD1_ClassIII v1 on m1.SlotNum_ID = v1.SlotNum_ID
Where left(m1.PTNumber,2) = 'PT' and m1.Denom_ID <> 9
and v1.Act = 1 and m1.Active = 1 and v1.MnyPlyd <> 0
and not (v1.MnyPlyd = v1.MnyWon and v1.ActWin = 0)
and v1.[Date] between DateAdd(dd,-90,@Date) and @Date) as TotalCnt,
-- attempting to calculate the percent by PTCnt/TotalCnt returns 0
(Count(substring(m.PTNumber,3,3)) /
(select Count(substring(m1.PTNumber,3,3))
from tblVGD1_Master m1
left join tblVGD1_ClassIII v1 on m1.SlotNum_ID = v1.SlotNum_ID
Where left(m1.PTNumber,2) = 'PT' and m1.Denom_ID <> 9
and v1.Act = 1 and m1.Active = 1 and v1.MnyPlyd <> 0
and not (v1.MnyPlyd = v1.MnyWon and v1.ActWin = 0)
and v1.[Date] between DateAdd(dd,-90,@Date) and @Date)) as AUPct
-- main select
from tblVGD1_Master m
left join tblVGD1_ClassIII v on m.SlotNum_ID = v.SlotNum_ID
Where left(m.PTNumber,2) = 'PT' and m.Denom_ID <> 9
and v.Act = 1 and m.Active = 1 and v.MnyPlyd <> 0
and not (v.MnyPlyd = v.MnyWon and v.ActWin = 0)
and v.[Date] between DateAdd(dd,-90,@Date) and @Date
group by substring(m.PTNumber, 3,3)
order by AUPct Desc
Thanks. Dan
Hi all
i using lookup error output to insert rows into table
Rows count rows has been inserted on the table 59,123,019 mill
table rows count 6,878,110 mill ............................
any ideas
Is there a difference in performance when using count(*) or count(columnname)?
View 10 Replies View RelatedI would like to AUTOMATICALLY count the event for the month BEFORE today
and
count the events remaining in the month (including those for today).
I can count the events remaining in the month manually with this query (today being March 20):
SELECT Count(EventID) AS [Left for Month],
FROM RECalendar
WHERE
(EventTimeBegin >= DATEADD(DAY, 1, (CONVERT(char(10), GETDATE(), 101)))
AND EventTimeBegin < DATEADD(DAY, 12, (CONVERT(char(10), GETDATE(), 101))))
Could anyone provide me with the correct syntax to count the events for the current month before today
and
to count the events remaining in the month, including today.
Thank you for your assistance in advance.
Joel
What's up with this?
This takes like 0 secs to complete:
update xxx_TableName_xxx
set d_50 = 'DE',modify_timestamp = getdate(),modified_by = 1159
where enc_id in
('C24E6640-D2CC-45C6-8C74-74F6466FA262',
'762E6B26-AE4A-4FDB-A6FB-77B4782566C3',
'D7FBD152-F7AE-449C-A875-C85B5F6BB462')
but From linked server this takes 8 minutes????!!!??!:
update [xxx_servername_xxxx].xxx_DatabaseName_xxx.dbo.xxx_TableName_xxx
set d_50 = 'DE',modify_timestamp = getdate(),modified_by = 1159
where enc_id in
('C24E6640-D2CC-45C6-8C74-74F6466FA262',
'762E6B26-AE4A-4FDB-A6FB-77B4782566C3',
'D7FBD152-F7AE-449C-A875-C85B5F6BB462')
What settings or whatever would cause this to take so much longer from the linked server?
Edit:
Note) Other queries from the linked server do not have this behavior. From the stored procedure where we have examined how long each query/update takes... this particular query is the culprit for the time eating. I thought it was to do specefically with this table. However as stated when a query window is opened directly onto that server the update takes no time at all.
2nd Edit:
Could it be to do with this linked server setting?
Collation Compatible
right now it is set to false? I also asked this question in a message below, but figured I should put it up here.
I am hoping someone can shed light on this odd behavior I am seeing running a simple UPDATE statement on a table in SQL Server 2000. I have 2 tables - call them Table1 and Table2 for now (among many) that need to have certain columns updated as part of a single transaction process. Each of the tables has many columns. I have purposely limited the target column for updating to only ONE of the columns in trying to isolate the issue. In one case the UPDATE runs fine against Table1... at runtime in code and as a manual query when run in QueryAnalyzer or in the Query window of SSManagementStudio - either way it works fine.
However, when I run the UPDATE statement against Table2 - at runtime I get rowsaffected = 0 which of course forces the code to throw an Exception (logically). When I take out the SQL stmt and run it manually in Query Analyzer, it runs BUT this is the output seen in the results pane...
(0 row(s) affected)
(1 row(s) affected)
How does on get 2 answers for one query like this...I have never seen such behavior and it is a real frustration ... makes no sense. There is only ONE row in the table that contains the key field passed in and it is the same key field value on the other table Table1 where the SQL returns only ONE message (the one you expect)
(1 row(s) affected)
If anyone has any ideas where to look next, I'd appreciate it.
Thanks
Hi SQL fans,I realized that I often encounter the same situation in a relationdatabase context, where I really don't know what to do. Here is anexample, where I have 2 tables as follow:__________________________________________ | PortfolioTitle|| Portfolio |+----------------------------------------++-----------------------------+ | tfolio_id (int)|| folio_id (int) |<<-PK----FK--| tfolio_idfolio (int)|| folio_name (varchar) | | tfolio_idtitle (int)|--FK----PK->>[ Titles]+-----------------------------+ | tfolio_weight(decimal(6,5)) |+-----------------------------------------+Note that I also have a "Titles" tables (hence the tfolio_idtitlelink).My problem is : When I update a portfolio, I must update all theassociated titles in it. That means that titles can be either removedfrom the portfolio (a folio does not support the title anymore), addedto it (a new title is supported by the folio) or simply updated (atitle stays in the portfolio, but has its weight changed)For example, if the portfolio #2 would contain :[ PortfolioTitle ]id | idFolio | idTitre | poids1 2 1 102 2 2 203 2 3 30and I must update the PortfolioTitle based on these values :idFolio | idTitre | poids2 2 202 3 352 4 40then I should1 ) remove the title #1 from the folio by deleting its entry in thePortfolioTitle table2 ) update the title #2 (weight from 30 to 35)3 ) add the title #4 to the folioFor now, the only way I've found to do this is delete all the entriesof the related folio (e.g.: DELETE TitrePortefeuille WHERE idFolio =2), and then insert new values for each entry based on the new givenvalues.Is there a way to better manage this by detecting which value has to beinserted/updated/deleted?And this applies to many situation :(If you need other examples, I can give you.thanks a lot!ibiza
View 8 Replies View RelatedThe Folowing code is not working anymore. (500 error)
Set objRS = strSQL1.Execute
strSQL1 = "SELECT * FROM BannerRotor where BannerID=" & cstr(BannerID)
objRS.Open strSQL1, objConn , 2 , 3 , adCmdText
If not (objRS.BOF and objRS.EOF) Then
objRS.Fields("Exposures").Value =objRS.Fields("Exposures").Value + 1
objRS.update
End If
objRS.Close
The .execute Method works fine
strSQL1 = "UPDATE BannerRotor SET Exposures=Exposures+1 WHERE BannerID=" & cstr(BannerID)
objConn.Execute strSQL1
W2003 + IIS6.0
Pls advice?
If I have a table with 1 or more Nullable fields and I want to make sure that when an INSERT or UPDATE occurs and one or more of these fields are left to NULL either explicitly or implicitly is there I can set these to non-null values without interfering with the INSERT or UPDATE in as far as the other fields in the table?
EXAMPLE:
CREATE TABLE dbo.MYTABLE(
ID NUMERIC(18,0) IDENTITY(1,1) NOT NULL,
FirstName VARCHAR(50) NULL,
LastName VARCHAR(50) NULL,
[Code] ....
If an INSERT looks like any of the following what can I do to change the NULL being assigned to DateAdded to a real date, preferable the value of GetDate() at the time of the insert? I've heard of INSTEAD of Triggers but I'm not trying tto over rise the entire INSERT or update just the on (maybe 2) fields that are being left as null or explicitly set to null. The same would apply for any UPDATE where DateModified is not specified or explicitly set to NULL. I would want to change it so that DateModified is not null on any UPDATE.
INSERT INTO dbo.MYTABLE( FirstName, LastName, DateAdded)
VALUES('John','Smith',NULL)
INSERT INTO dbo.MYTABLE( FirstName, LastName)
VALUES('John','Smith')
INSERT INTO dbo.MYTABLE( FirstName, LastName, DateAdded)
SELECT FirstName, LastName, NULL
FROM MYOTHERTABLE
hi need help how to send an email from database mail on row update
from stored PROCEDURE multi update
but i need to send a personal email evry employee get an email on row update
like send one after one email
i use FUNCTION i get on this forum to use split from multi update
how to loop for evry update send an single eamil to evry employee ID send one email
i update like this
Code Snippet
:
DECLARE @id nvarchar(1000)
set @id= '16703, 16704, 16757, 16924, 17041, 17077, 17084, 17103, 17129, 17134, 17186, 17190, 17203, 17205, 17289, 17294, 17295, 17296, 17309, 17316, 17317, 17322, 17325, 17337, 17338, 17339, 17348, 17349, 17350, 17357, 17360, 17361, 17362, 17366, 17367, 17370, 17372, 17373, 17374, 17377, 17380, 17382, 17383, 17385, 17386, 17391, 17392, 17393, 17394, 17395, 17396, 17397, 17398, 17400, 17401, 17402, 17407, 17408, 17409, 17410, 17411, 17412, 17413, 17414, 17415, 17417, 17418, 17419, 17420, 17422, 17423, 17424, 17425, 17426, 17427, 17428, 17430, 17431, 17432, 17442, 17443, 17444, 17447, 17448, 17449, 17450, 17451'
UPDATE s SET fld5 = 2
FROM Snha s
JOIN dbo.udf_SplitList(@id, ',') split
ON split.value = s.na
WHERE fld5 = 3
now
how to send an EMAIL for evry ROW update but "personal email" to the employee
Code Snippet
DECLARE @xml NVARCHAR(MAX)DECLARE @body NVARCHAR(MAX)
SET @xml =CAST(( SELECT
FirstName AS 'td','',
LastName AS 'td','' ,
SET @body = @body + @xml +'</table></body></html>'
EXEC msdb.dbo.sp_send_dbmail
@recipients =''
@copy_recipients='www@iec.com',
@body = @body,
@body_format ='HTML',
@subject ='test',
@profile_name ='bob'
END
ELSE
print 'no email today'
TNX
Hello,I am trying to update records in my database from excel data using vbaeditor within excel.In order to launch a query, I use SQL langage in ADO as follwing:------------------------------------------------------------Dim adoConn As ADODB.ConnectionDim adoRs As ADODB.RecordsetDim sConn As StringDim sSql As StringDim sOutput As StringsConn = "DSN=MS Access Database;" & _"DBQ=MyDatabasePath;" & _"DefaultDir=MyPathDirectory;" & _"DriverId=25;FIL=MS Access;MaxBufferSize=2048;PageTimeout=5;" &_"PWD=xxxxxx;UID=admin;"ID, A, B C.. are my table fieldssSql = "SELECT ID, `A`, B, `C being a date`, D, E, `F`, `H`, I, J,`K`, L" & _" FROM MyTblName" & _" WHERE (`A`='MyA')" & _" AND (`C`>{ts '" & Format(Date, "yyyy-mm-dd hh:mm:ss") & "'})"& _" ORDER BY `C` DESC"Set adoConn = New ADODB.ConnectionadoConn.Open sConnSet adoRs = New ADODB.RecordsetadoRs.Open Source:=sSql, _ActiveConnection:=adoConnadoRs.MoveFirstSheets("Sheet1").Range("a2").CopyFromRecordset adoRsSet adoRs = NothingSet adoConn = Nothing---------------------------------------------------------------Does Anyone know How I can use the UPDATE, DELETE INSERT SQL statementsin this environement? Copying SQL statements from access does not workas I would have to reference Access Object in my project which I do notwant if I can avoid. Ideally I would like to use only ADO system andSQL approach.Thank you very muchNono
View 1 Replies View RelatedIt appears to update only the first qualifying row. The trace shows a row count of one when there are multiple qualifying rows in the table. This problem does not exist in JDBC 2000.
View 5 Replies View RelatedI'm having a strange problem that I can't figure out. I have an SQL stored procedure that updates a small database table. When testing the Stored Procedure from the Server Explorer, it works fine. However, when I run the C# code that's supposed to use it, the data doesn't get saved. The C# code seems to run correctly and the parameters that are passed to the SP seem to be okay. No exceptions are thrown.
The C# code:
SqlConnection conn = new SqlConnection(ConfigurationManager.ConnectionStrings["touristsConnectionString"].ConnectionString);
SqlCommand cmd = new SqlCommand("fort_SaveRedirectURL", conn);
cmd.CommandType = CommandType.StoredProcedure;
Label accomIdLabel = (Label)DetailsView1.FindControl("lblID");
int accomId = Convert.ToInt32(accomIdLabel.Text);
cmd.Parameters.Add("@accomId", SqlDbType.Int).Value = accomId;
cmd.Parameters.Add("@path", SqlDbType.VarChar, 250).Value = GeneratePath();
try
{
conn.Open();
cmd.ExecuteNonQuery();
}
catch(Exception ex)
{
throw ex;
}
finally
{
conn.Close();
}
The Stored Procedure:
ALTER PROCEDURE developers.fort_SaveRedirectURL
(
@accomId int,
@path varchar(250)
)
AS
DECLARE
@enabled bit,
@oldpath varchar(250)
/* Ensure that the accommodation has been enabled */
SELECT @enabled = enabled FROM Experimental_Accommodation
WHERE Experimental_Accommodation.id = @accomId
IF (@enabled = 1)
BEGIN
/* Now check if a path already exists */
SELECT @oldpath = oldpath FROM Experimental_Adpages_Redirect
WHERE Experimental_Adpages_Redirect.accom_id = @accomId
IF @oldpath IS NULL
BEGIN
/* If Path already exists then we should keep the existing URL */
/* Otherwise, we need to insert a new one */
INSERT INTO Experimental_Adpages_Redirect
(oldpath, accom_id)
VALUES (@path,@accomId)
END
END
RETURN