I need to add up the number of people who joined this month and compare that number to the number of people who joined last month and display the results in a report:
FirstName..LastName.....StartedDate
Randy......Simpson......5/4/2007 10:00:00 PM
Steve......Rowe.........5/2/2007 10:00:00 PM
Eric.......Dickerson....5/4/2007 10:00:00 PM
Gloria.....Sanches......5/1/2007 12:00:29 AM
Andres.....Marcelino....5/1/2007 12:06:31 AM
katie......ryan.........6/4/2007 12:08:35 AM
Denise.....River........6/4/2007 12:27:14 AM
Kellog.....Stover.......6/5/2007 12:37:20 AM
Glenn......Sanders......6/1/2007 12:42:40 AM
Lets suppose I have a db which looks like:District FundVAE AVAW AVAE BDC CDC ANYS BMD CVAW AI would like a query which displays the following dynamically. I don't know each unique member of the Fund field, they could be added by the end user. It might include M,J,S etc. I need the columns dynamically created. I can do it statically if I know the distinct members of fund. I would like to be able to do it dynamically. Any ideas? The static version with multiple queries is at the end.District Total A B CVAE 2 1 1 VAW 2 2 DC 3 2 1 NYS 1 1 MD 1 1 Query Name =GroupByDistSELECT district, COUNT(district) AS dcountFROM dbo.mydbGROUP BY districtQuery Name=DCountASELECT district, COUNT(district) AS dcountFROM dbo.mydbWHERE (fund = N'A')GROUP BY district Query Name=DCountBSELECT district, COUNT(district) AS dcountFROM dbo.mydbWHERE (fund = N'B')GROUP BY district Query Name=DCountCSELECT district, COUNT(district) AS dcountFROM dbo.mydbWHERE (fund = N'C')GROUP BY district SELECT GroupByDist.district, GroupByDist.dcount AS Total, DCountA.dcount AS A, DCountB.dcount AS B, DCountC.dcount AS C From GroupByDist LEFT OUTER JOIN DCountC ON GroupByDist.district = DCountC.district LEFT OUTER JOIN DCountB ON GroupByDist.district = DCountB.district LEFT OUTER JOIN DCountA ON GroupByDist.district = DCountA.district
We have an helpdesk sytem on SQL 2000. I am trying to show how much calls have been assigned to each parent category plus it's child categories in a single row. The thing is when I run my query it display parent and child categories and each on it's own rows. I do get the call totals for each row, but I would like to add the totals of the rows together and display it on row. The new table must have then 6 rows (because there is 6 parent categories) with the total of all calls for that parent category, as well as it's childs. Example:
parameter # Calls ------------ -------- desktoppp 5 desktopqq 6 {This is what I am getting at this stage} desktop t 4 network r 9 networkgg 10 softwarevv 3
I used to do this with classic asp but I'm not sure how to do it with .net.Basically I would take a table of Categories, Then I would loop through those. Within each loop I would call another stored procedure to get each item in that Category. I'll try to explain, Lets say category 2 has a player Reggie Bush and a player Drew Brees, and category 5 has Michael Vick, but the other categories have no items.Just for an example.. Category Table: ID Category1 Saints2 Falcons3 Bucaneers4 Chargers5 FalconsPlayer Table:ID CategoryID Player News Player Last Updated1 1 Reggie Bush Poetry in motion 9/21/20062 1 Drew Brees What shoulder injury? 9/18/20063 5 Michael Vick Break a leg, seriously. 9/20/2006 Basically I would need to display on a page:SaintsReggie BushPoetry in MotionFalconsMichael VickBreak a leg, seriously.So that the Drew Brees update doesnt display, only the Reggie Bush one, which is the latest.I have my stored procedures put together to do this. I just don't know how to loop through and display it on a page. Right now I have two datareaders in the code behind but ideally something like this, I would think the code would go on the page itself, around the html.
Hi,New to SQL. Got some questions about it.Suppose I have two tables. Each of them has a single column, named asc1. For table T1, I have:11133579For table T2, I have:1234513The exercise I want to do is to select the number of occurence in T1for those elements in T2. For above tables, I want to show:1 3 ( i.e. "1" is in T2 and shows 3 times in T1)2 0 (i.e. "2" is in T2 but doesn't show in T1)3 2 (i.e. "3" is in T2 and show 2 times in T1)It seems I can't figure out a good way to do this. Any help will beappreciated.Thanks
I am working on writing a query to use with Reporting Services where I am pulling grades from a school grade book trying to see what students qualify for Honor Roll. I have one Honor Roll done but am still working on the other. The qualifications I am trying to get is that a student has a gpa >3.0 and can have one C grade. I've got the 3.0 and the C's down but how to get the query to pull anyone having at the most one C. It doesn't matter whether it is C+, C, or C- but the student can't have more than a count of one.
Here is what I have
SELECT DISTINCT s.lastname+','+' '+s.firstname AS Student, s.studentnumber,e.grade,t.name AS Term,
gs.score, c.name AS Course, se.teacherdisplay
FROM GradingScore gs
INNER JOIN student s ON s.personid = gs.personid
INNER JOIN v_TermGpa tg ON tg.personid = s.personid
INNER JOIN enrollment e ON e.enrollmentid = s.enrollmentid AND e.calendarid = gs.calendarid
INNER JOIN scheduleStructure ss ON ss.calendarid = gs.calendarid
INNER JOIN Termschedule ts ON ts.structureid = ss.structureid
INNER JOIN Term t ON t.termscheduleid = ts.termscheduleid
INNER JOIN section se ON se.sectionid = gs.sectionid
INNER JOIN course c ON c.courseid = se.courseid
WHERE gs.calendarID = 20 AND t.name ='1st 6wk' AND tg.term1gpa >=3.0 AND s.enddate IS NULL
AND gs.score <='C-'
AND (select gs1.personid, gs1.score
from gradingscore gs1
inner join enrollment e1 on e1.personid = gs1.personid
Inner join schedulestructure ss1 on ss1.calendarid = e1.calendarid
Inner join termschedule ts1 on ts1.structureid = ss1.structureid
Inner join term t1 on t1.termscheduleid = ts1.termscheduleid
where gs1.score IN('C','C+','C-') and (count(score)= 0 or count(score) < 2))
ORDER BY s.[student]
I can get it to work all the way up to where the And (count(score) starts then there is something about the way the count is in there that I haven't figured out yet.
How do I count the total number of each row in a table? The table Company has a field called Group. How do I count the total amount of members in each group?
Hi all, I would like to have my SQL statement result to return an additional "column", automatically adding an "auto-increasing" number with it. So if I for example select all Dates older than today's date, I would want something like this:
1 10/12/2006
2 10/18/2006
3 10/20/2006
4 10/22/2006
5 10/30/2006 Keep in mind that it's not my intention to fysically insert the "counting" column into the table, but rather do it "virtually". Is this possible? And if yes, how ? :)
Sorry for all the code below. I am realizing that my DB design is bad but I already have 7 pages built around it that work fine...until now, so I would really like to not change the DB if possible. My table has 22 columns: iID which is the identity colum. Then there is iAsmtID which is the assessment ID. Lastly there are 20 colums- q1 through q20, each of which will have a 1, 2, or 3, depending on the radio buttons the user clicked. Nows my problem. I have to find a percent for the assessment. It works like this. 3s are NA so we are not worried about them now. I need to find the number of ones and the number of twos for each assessment ID. Then add those together and divide by the number of ones. How can I find the number of the ones and twos. I have below but its not working. Says there is incorrect syntax at the ',' which is a different color below. Any and all help appreciated.'Open connectionset conn=Server.CreateObject("ADODB.Connection")conn.open My_Connset rs = Server.CreateObject("ADODB.Recordset")str = "SELECT SUM((CASE WHEN q1=1 THEN 1 ELSE 0 END)+(CASE WHEN q2=1 THEN 1 ELSE 0 END)+(CASE WHEN q3=1 THEN 1 ELSE 0 END)+(CASE WHEN q4=1 THEN 1 ELSE 0 END)+(CASE WHEN q5=1 THEN 1 ELSE 0 END)+(CASE WHEN q6=1 THEN 1 ELSE 0 END)+(CASE WHEN q7=1 THEN 1 ELSE 0 END)+(CASE WHEN q8=1 THEN 1 ELSE 0 END)+(CASE WHEN q9=1 THEN 1 ELSE 0 END)+(CASE WHEN q10=1 THEN 1 ELSE 0 END)+(CASE WHEN q11=1 THEN 1 ELSE 0 END)+(CASE WHEN q12=1 THEN 1 ELSE 0 END)+(CASE WHEN q13=1 THEN 1 ELSE 0 END)+(CASE WHEN q14=1 THEN 1 ELSE 0 END)+(CASE WHEN q15=1 THEN 1 ELSE 0 END)+(CASE WHEN q16=1 THEN 1 ELSE 0 END)+(CASE WHEN q17=1 THEN 1 ELSE 0 END)+(CASE WHEN q18=1 THEN 1 ELSE 0 END)+(CASE WHEN q19=1 THEN 1 ELSE 0 END)+(CASE WHEN q20=1 THEN 1 ELSE 0 END) AS [color:#FF0000]CountOfOnes,SUM[/color]((CASE WHEN q1=2 THEN 1 ELSE 0 END)+(CASE WHEN q2=2 THEN 1 ELSE 0 END)+(CASE WHEN q3=2 THEN 1 ELSE 0 END)+(CASE WHEN q4=2 THEN 1 ELSE 0 END)+(CASE WHEN q5=2 THEN 1 ELSE 0 END)+(CASE WHEN q6=2 THEN 1 ELSE 0 END)+(CASE WHEN q7=2 THEN 1 ELSE 0 END)+(CASE WHEN q8=2 THEN 1 ELSE 0 END)+(CASE WHEN q9=2 THEN 1 ELSE 0 END)+(CASE WHEN q10=2 THEN 1 ELSE 0 END)+(CASE WHEN q11=2 THEN 1 ELSE 0 END)+(CASE WHEN q12=2 THEN 1 ELSE 0 END)+(CASE WHEN q13=2 THEN 1 ELSE 0 END)+(CASE WHEN q14=2 THEN 1 ELSE 0 END)+(CASE WHEN q15=2 THEN 1 ELSE 0 END)+(CASE WHEN q16=2 THEN 1 ELSE 0 END)+(CASE WHEN q17=2 THEN 1 ELSE 0 END)+(CASE WHEN q18=2 THEN 1 ELSE 0 END)+(CASE WHEN q19=2 THEN 1 ELSE 0 END)+(CASE WHEN q20=2 THEN 1 ELSE 0 END) AS CountOfTwos FROM ITCC_Test WHERE iAsmtID="&iAsmtIDresponse.Write(str)rs.open str, connif rs.eof = true then ' response.Write("<h2>No count done</h3>") response.End()else'Declare variables CountOfOnes = rs("CountOfOnes") CountOfTwos = rs("CountOfTwos")end ifrs.closeset rs = nothingconn.close'set conn = nothing
I'm trying to count the number of rows but it's not working. Here's my code:
SELECT 'TOTAL number of rows', count(*) --This counts 4! The total number of rows in [Activites] FROM [Activities] WHERE [Person ID] IN ( SELECT DISTINCT [Person ID] --This brings back 2 rows (two specific people) FROM [Activites] )
As my comments say, I'm wanting to count the two rows but it's counting every row. Obviously I'm doing something wrong but I can't work it out.
I'm trying to include the COUNT(*) value of a sub-query in the results of a parent query. My SQL code is:
SELECT appt.ref, (Case When noteCount > 0 Then 1 Else 0 End) AS notes FROM touchAppointments appt, (SELECT COUNT(*) as noteCount FROM touchNotes WHERE appointment=touchAppointments.ref) note WHERE appt.practitioner=1
This comes up with an error basically saying that 'touchAppointments' isn't valid in the subquery. How can I get this statement to work and return the number of notes that relate to the relevant appointment?
How can I aggregate a top 5 count across two satellite tables?
e.g. Orders and downloads table each have multiple entries for the same customer ID I would like to count the orders and add them to the downloads count too e.g. 5 orders added to 10 downloads giving 15 as the total for this customer and get a total 'site activity' result which I would like to select the top 5 for.
is there any way to set up a column that has the row count in it? i need this for a program i am developing and this would make it much easier to deal with. I know i can get a total count but when i run a count within a select statement i just get '1' for every row. thanks
Hi. I have a small problem that i just can't seem to figure out. I'm trying to generate a report for a case management system. The problem I am having is trying to exclude some of these results. Here is my query:
SELECT COUNT(DefendantCase.ProsAtty) AS CountOfProsAtty FROM DefendantCase LEFT JOIN DefendantEventPros ON DefendantCase.VBKey=DefendantEventPros.VBKey WHERE DefendantCase.StatusID=17 AND DefendantCase.ProsAtty=55 AND DefendantEventPros.EventDate BETWEEN DATEADD(DAY,-60,GETDATE()) AND GETDATE() AND DefendantEventPros.EventID=9
This query is trying to find the total amount of cases where the statusid=17, the prosatty=55, the date is between today and 60 days ago, and there is an eventid=9.
now, i'm not getting errors in the query itself; it's just that it's inflating the total number. If a case has more than one eventid=9, it will include that extra in the results. I do not want to include those in the results. Does anyone have any suggestions? Thanks!
hiya all, I got a table that is represented as a B-Tree, it has a one to many relation with its self ------------ | UserID | ------------ |FatherID| ------------
UserID = FatherID it looks like this o /// \ ooo ooo //\ ///\ oo ooo ooo I want to get all the nodes that has 256 children and grand children and each node is limited to have 6 nodes under it. any ideas ? the DB isn't filled with data yet so we can add more fields to the table if it helps.
I could write a trigger that increments a counter in each node but it will be a recursive trigger so it can go from the child to its father and the father to its father upating them and so on.
Hi all, I am trying to count the total amount of times the primary key is used within each month of the year "JAN", "FEB" "MAR"... Unfortunately I have no idea how to A) Search by month and B) Count the total amount of times data within the new table that is created AFTER the outer joins are done. I hope you can help.
Thanks.
SELECT * FROM tableA ta, tableB tb, tableC tc WHERE tc.updated_date >= TO_DATE ('01/05/2008 00:00:00','DD/MM/YYYY HH24:MI:SS') AND tc.updated_date <= TO_DATE ('31/05/2008 00:00:00','DD/MM/YYYY HH24:MI:SS')
AND tc.primaryKey = tb.primaryKey (+) AND tc.primaryKey = ta.primaryKey (+) AND count(tc.priarykey) -- This is what I want to count ;
select statement joining file1 to file2. File 1 may have 0, 1, or many corresponding rows in file2. I need to count the corresponding rows in table2. Table2 also has a Boolean column and I need to count the number of rows where it is true. So I need to count the total number of matching rows and the count of those that are set to true. This is an example of what I have so far. I had to add each column being selected into a Group by to make it work, but I do not know why. Is there some other way this should be set up.
SELECT c.CarId, c.CarName, c.CarColor, COUNT(t.TrailerId) as trailerCount, (add count of boolian, say t.TrailerFull is true) FROM Car c LEFT JOIN Trailer t on t.CarId = c.CarId GROUP BY c.CarId, c.CarName, c.CarColor
Hi I am fairly new to this, and I searched the forums before posting this, but I couldn't find anything that applies. I was having trouble removing/counting for records that include a certain value.
Ex, I want to know how many records in the LASTNAME field have an @ anywhere in the field. I formerly used FoxPro and the way I could check was "Count for atc("@",LASTNAME)<>0".
I tried this sql query " SELECT COUNT(*) AS COUNT FROM `DATABASE` WHERE LOCATE(‘@’, LASTNAME)>0 " however, it didn't work. Can someone please help?
All, I have a table that was created for a web form. The fields are populated with Y, N, NC or NA. I need to total these for each record. There are about 40 fields in each record. The expected result Form Y N NA 1 4 2 34 2 8 2 30 3 40 0 0 Thanks for you Help
Hi, I'm attempting to write a small query that will search all entries in a colum and compair their values to see if there are any duplicates, then display only the duplicate entries. I'm running into trouble when using ms sql 2000 in that it does not like the COUNT statement. Any ideas?
I have a table with three fileds 1 - SmsTime (datatype = datetime) 2 - MsgCnt (datatype = int) 3 - Message (datatype = varchar)
Here MsgCnt means it will give the number of sms part (70 charector is equal to One SMS). So in each row MsgCnt may be vary. Some time it may be 1 or 3 or 5 or 2 etc. Now here I need to count how many MsgCnt is received on Today. Its not to count the rows but counting the MsgCnt fild value. Is there any sql way to find it.
Is there a way to count days between two dates according to a specific calendar (for example, Italian banking holidays calendar)? If there isn't, how could I count days between two dates without counting Saturdays and Sundays? In Excel there's the command DAY.WEEK with which week days are numbered from 1 (Monday) to 7 (Sunday) and I can instruct: "if weekday is <= 4 then weekday + 1 else weekday + 3. Of course Excel has a calendar beneath and knows that, say, 20-02-2008 is Wednesday (day 3 of the week).
I'm having trouble getting my head around this, and no one in the groupshas posted exactly the problem.The table below tracks site traffic across a network. There is 1 rowper pageview and UUID is that user's unique cookie.CREATE TABLE [dbo].[Stats_Working] ([inac_stats_id] [int] NOT NULL ,[hit_time] [datetime] NULL ,[site_id] [int] NULL ,[site_cat_id] [int] NULL ,[item_id] [int] NULL ,[local_content_cat_id] [int] NULL ,[UUID] [float] NULL ,[USER_AGENT] [char] (50) NULL) ON [PRIMARY]GOA client asked: of these pageviews and within each category, how manyare accounted for by users that generated 2 or fewer pageviews, 3+pageviews, and 4+ pageviews?I said, "yes, we have that information". I know it's here, but I'mbraindead from looking at what should be a simple solution.Thanks for any helpCam Bevis*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
Hi, I am trying to restore a database through Visual Basic .NET 2005 which I managed to backup successfully.
However when I try to restore the database even though I have created a server to use as the admin side to perform the restore and closed the connection to the target database I still get an error saying database in use cannot get exclusive hold?
Could someone tell me how I count or view open connections please?
I have a column in a report with values Y or N or V. In the header, I have to show the number of times each value appeared.
I used RepeatingValue() with IIF() but it's counting all the values as same, e.g., if there are four occurrences of Y, two of N and one of V, I want something like this:
Y Cnt=4, N Cnt=2, V Cnt=1
My assumption was that this will work (white spaces added for readability:
=iif(
Fields!myCol.Value = "Y",
"Y Cnt=" & RunningValue(Fields!myCol.Value, Count, "dsMyDataSet"),
